This document provides a diagram and overview of the control and supervision systems for a 132kV and 11kV substation. It shows the hardware components, including SICAM controllers, servers, terminal units and protection devices. It also lists the software used, such as SICAM WinCC for HMI, SICAM plusTOOLS for engineering, and AVR and CR for voltage and power factor regulation. Remote connections allow access for service via dial-up or IEC 60870-101 protocol.
This document provides a diagram and overview of the control and supervision systems for a 132kV and 11kV substation. It shows the hardware components, including SICAM controllers, servers, terminal units and protection devices. It also lists the software used, such as SICAM WinCC for HMI, SICAM plusTOOLS for engineering, and AVR and CR for voltage and power factor regulation. Remote connections allow access for service via dial-up or IEC 60870-101 protocol.
This document provides a diagram and overview of the control and supervision systems for a 132kV and 11kV substation. It shows the hardware components, including SICAM controllers, servers, terminal units and protection devices. It also lists the software used, such as SICAM WinCC for HMI, SICAM plusTOOLS for engineering, and AVR and CR for voltage and power factor regulation. Remote connections allow access for service via dial-up or IEC 60870-101 protocol.
This document provides a diagram and overview of the control and supervision systems for a 132kV and 11kV substation. It shows the hardware components, including SICAM controllers, servers, terminal units and protection devices. It also lists the software used, such as SICAM WinCC for HMI, SICAM plusTOOLS for engineering, and AVR and CR for voltage and power factor regulation. Remote connections allow access for service via dial-up or IEC 60870-101 protocol.
Win CC Win CC Win CC Win CC Software AVR for Voltage Regulation Software CR for Power Factor Regulation *) Client 1 Client 2 Engineering Office Printer
Com 1 Com 2 OLM OLM
Dial-up Connection for Remote Service
Terminal LAN Ethernet TCP/IP
A see sheet 8 OLM OLM B see sheet 8
Server 1 Server 2 Dotmatrix Dotmatrix GPS OLM OLM Receiver LDC
Process LAN Ethernet TCP/IP
OLM OLM SCADA *)
IEC 60870-101 Switch Trans. Unit Trans. Unit SCADA SYS Box 2) Time Sync. Box Fa. Hopf MPI MPI SICAM SICAM SAS STATION SAS STATION CONTROLLER 1 CONTROLLER 2
Parallel Connection (Hardwire)
OLM OLM OLM OLM OLM OLM
FMS FO Circle 1 see sheet 3 FMS FO Circle 2 see sheet 4 FMS FO Circle 2 see sheet 5
BAY Protection BAY Protection BAY CONTROL & BAY CONTROL & BAY CONTROL & BAY CONTROL & 11kV Switchgear CONTROL UNIT Relais CONTROL UNIT Relais PROTEC. DEV. PROTEC. DEV. PROTEC. DEV. PROTEC. DEV. 6MD664 7SA522 1) 6MD664 7SA522 1) 7SJ6 7SJ6 7SJ6 7SJ6
1) Only for Cable Feeder 132kV Switchgear 2) Switch Box for Remote Connection IEC 60870-101 OLM Optic Link Module Starcoupler for Details see sheet 6+7 MPI Multi Point Interface (for Service)
A Rev. 19.03.01 Bo Date 01.03.2001 ADWEA Abu Dhabi T
B Rev. 13.08.01 Bo Drawn Bojer Substation W1 SIEMENS AG SCMS Configuration Appr. 132/11kV SUBSTATION Sheet: 2 (4) E50414-S1243-S001 Rev. Remarks Date Name Norm Orig. / NbgH EVSV26
