Scribd Logo
Upload

Welcome to Scribd!

  • 404 views

    En Additin RC 93210

    Uploaded by

    Dinesh babu
    read

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    En Additin RC 93210

    Uploaded by

    Dinesh babu
    404 views2 pages
    read

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    read

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    404 views2 pages

    En Additin RC 93210

    Uploaded by

    Dinesh babu
    read

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data Sheet

    Additin® Additive Package


    RC 9321

    Type
    Ashless multifunctional oxidation and rust inhibiting additive package
    - for R&O oils, hydraulic fluids HL, gear oils CL according to:
    DIN 51524, part 1 (HL); DIN 51517, part 2 (CL); AFNOR NF E 48-603 (HL); Cincinnati-Machine P-38 (HL-32), P-
    55 (HL-46), P-54 (HL-68), P-57 (HL-150), P-62 (FC-10)
    - for turbine oils according to:
    DIN 51515, part 1 (L-TD), part 2 (L-TG); ISO 8068; Siemens TLV 9013 04/01; British Standard BS 489; General
    Electric GEK 32568 F; MIL-L-17672 D; CEGB Standard 207001; Brown Boveri HTGD 90117; U.S. Steel 120;
    Westinghouse Electric Corp. Turbine Oil Spec.; Solar ES 9-224; Alstom HTGD 90117 V0001 S
    - for compressor oils according to:
    DIN 51506 (VBL, VCL, VDL); ISO / DP 6521 (DAA, DAB, DAH, DAG)

    Technical data*
    Composition combination of antioxidants, corrosion
    inhibitors, non-ferrous metal deactivators

    Appearance light brown, clear, low viscosity liquid

    Nitrogen approx. 3.6 % weight

    Sulphur approx. 7.0 % weight

    Phosphorus approx. 0.5 % weight

    Viscosity, 40 °C (ASTM-D 445) approx. 80 mm²/s

    Density, 20 °C (ASTM-D 1298) approx. 1000 kg/m³

    Flash point, COC (ASTM-D 92) > 130 °C

    Mineral oil content approx. 5 % weight

    Application
    - R&O oils
    - hydraulic fluids HL
    - turbine oils
    - gear oils CL
    - compressor oils
    - greases
    Additin RC 9321 is an ashless additive package with outstanding oxidation and corrosion inhibiting properties.
    Additin RC 9321 is particularly recommended for use in the formulation of lubricants for which high performance
    demands have to be met:
    - high oxidation stability
    - good thermal stability
    - excellent hydrolytic stability
    - no sludge formation
    - very low acid number
    - good protection against corrosion of steel and non-ferrous metals
    - good demulsifying behaviour
    - good foam behaviour

    Page Version: Revised: Printed on:


    1 of 2 3/13. Feb 2012 01-08-2015 01-08-2015
    These properties can be obtained at low treat level in a broad range of different base oils, especially in PAO, HC,
    HVI and Group II base oils.
    The recommended treat level is in the range of 0.3 to 0.6 % by weight.
    Depending on application Additin RC 9321 may cause yellowish discolouration due to oxidative processes.

    Solubility
    Soluble in mineral oils, PAO, HC, HVI and Group II base oils. However, it is necessary to verify the solubility in
    the base oils used and the compatibility with other additives.

    Test results
    see technical report

    Packing unit
    200 kg bunghole drums

    Storage conditions
    in a dry place at room temperature approx. 12 months. This product is liable to crystallization at low
    temperatures. If this occurs, gentle warming up to 40 - 50°C with agitation will ensure homogeneity of the
    product without adverse effects. Local overheating - above 60 °C - must be avoided.

    Handling
    Consult material safety data sheet (MSDS)
    for additional handling information on Additin RC 9321

    Our technical advice - whether verbal, in writing or by way of trials - is given in good faith but without warranty, and this also applies where
    proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their
    suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore,
    entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods
    delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale
    and Delivery.

    Rhein Chemie Rheinau GmbH


    Duesseldorfer Strasse 23-27
    68219 Mannheim, Germany
    Tel.: +49-621-8907-0
    Fax: +49-621-8907-675
    E-Mail: [email protected]
    www.rheinchemie.com

    Page Version: Revised: Printed on:


    2 of 2 3/13. Feb 2012 01-08-2015 01-08-2015

    You might also like