Road Patterns

Road Patterns - Types of Road Patterns & Its Importance
There are various types of road patterns and each pattern has its own advantages and
limitations. The choice of the road pattern depends upon the various factors such as:
 Locality
 Layout of the different towns, villages, industrial and production centres.
 Planning Engineer.
The various road patterns may be classified as follows:
1. Rectangular or Block pattern
2. Radial or Star and block Pattern
3. Radial or Star and Circular Pattern
4. Radial or Star and Grid Pattern
5. Hexagonal Pattern
6. Minimum Travel Pattern
Rectangular or Block pattern:

In this pattern, the whole area is divided into rectangular blocks of plots, with streets
intersecting at right angles. The main road which passes through the center of the area
should be sufficiently wide and other branch roads may be comparatively narrow. The
main road is provided a direct approach to outside the city.
Advantages:
1. The rectangular plots may be further divided into small rectangular blocks for
construction of buildings placed back to back, having roads on their front.
2. The construction and maintenance of roads of this pattern is comparatively
easier.
Limitations:
1. This pattern is not very much convenient from traffic point of view, because at
the intersections, the vehicles face each other.
Example: City roads of Chandigarh has rectangular pattern
Radial or Star and block Pattern:

In this pattern, the entire area is divided into a network of roads radiating from the
business outwardly. In between radiating main roads, the built-up area may be
planned with rectangular block.
Advantages:
1. Reduces level of congestion at the primary bottleneck location.
2. Prevents traffic from accessing local flow routes in the direction of the event
venue that operate in favor of egress traffic flow.
3. If one road is blocked, traffic can move on other.
4. Vehicles face each other less than block pattern.
Limitations:
1. Proves particularly effective if two-lane ramp traffic does not have to merge at
downstream end of ramp.
2. Safety appurtenances such as guide rail transitions, crash attenuators, and post
support bases have not been designed to provide adequate protection at
hazardous locations from the opposite direction of travel.
Example: Chandigarh has rectangular pattern
1
Radial or Star and Circular Pattern:
In this system, the main radial roads radiating from central business area are
connected together with concentric roads. In these areas, boundary by adjacent radial
roads and corresponding circular roads, the built-up area is planned with a curved
block system.
Advantages:
1. At traditional intersections with stop signs or traffic signals, some of the most
common types of crashes are right-angle, left-turn, and head-on collisions.
These types of collisions can be severe because vehicles may be traveling
through the intersection at high speeds. With circular pattern, these types of
potentially serious crashes essentially are eliminated because vehicles travel in
the same direction.
2. Installing circular pattern in place of traffic signals can also reduce the
likelihood of rear-end crashes.
3. Removing the reason for drivers to speed up as they approach green lights and
by reducing abrupt stops at red lights.
4. Because roundabouts improve the efficiency of traffic flow, they also reduce
vehicle emissions and fuel consumption.
Limitations:
1. Center lines of roads leading to circular pattern should be properly aligned
with the central island.
2. Approach roads should be sufficiently curved, far enough in advance of
circular pattern, to reduce vehicle speeds of entering drivers.
3. Islands separating the approach and exit lanes, known as splitter islands,
should extend far enough to provide pedestrian refuge and to delineate the
roundabout.
4. Traffic signs, pavement markings, and lighting should be adequate so that
drivers are aware that they are approaching a roundabout and that they should
reduce their travel speed.
5. For older drivers declines in vision, hearing, and cognitive functions, as well
as physical impairments, may affect some older adults' driving ability.
Intersections can be especially challenging for older drivers.
Examples: Road network of Connaught Place in New Delhi
Radial or Star and Grid Pattern :

Change in direction, and because street patterns are the most enduring physical
element of any layout, it could potentially contribute to systematic site planning and,
consequently, deserves a closer look. Though the network is entirely interconnected,
north-south movement becomes circuitous, indirect, and inconvenient, making driving
an unlikely choice and vividly illustrating that interconnectedness by itself is
insufficient to facilitate movement.
Advantages:
1. Keep vehicular traffic safe with a high proportion of 3-way intersections.
2. Reduce cut-through traffic by similar or other means.
3. Improve traffic flow in both directions using Savannah’s cellular structure.
4. Improve land use efficiency and unit density.
Limitations:
1. Islands separating the approach and exit lanes, known as splitter islands,
should extend far enough.
2
drivers are aware that they should reduce their travel speed.
Examples: The Nagpur road plan formulae were prepared on the assumption of Grid
pattern.
Hexagonal Pattern :
In this pattern, the entire area is provided with a network of roads forming hexagonal
figures. At each corner of the hexagon, three roads meet. The built-up area bounded
by the sides of the hexagons is further divided in suitable sizes.
Advantages:
1. Three roads meet the built-up area boundary by the sides of the hexagons.
Limitations:
Minimum Travel Pattern:

In this road pattern, city (city centre) is contented by sector centers, suburban centers
and neighborhood centers by the road which required minimum to connect the city
center.
Advantages:
1. These types of potentially serious crashes essentially are eliminated.
Limitations:
2. Intersections can be especially challenging for older drivers.
Linear Pattern
In this type of pattern the roads grow linearly in one direction possibly due to the
presence of some natural forces such as sea or ocean at one side of the city.
Legend: City center – encircled dot- sector center - * suburban center - * neighborhood center - *
representation of a Minimum Travel city
NOTE: If the city is being planned from scratch, some pattern can be given. In most
of the cities, some of the pattern already exists and one has to go with them.
Minimum travel pattern: In this type, city is divided into number of nodal points
around a central portion by forming sectors. And each sector is divided again in such a
way that from each of the nodal centre, the distance to the central place is minimum.

Road Patterns

Uploaded by

Road Patterns

Uploaded by

Road Patterns - Types of Road Patterns & Its Importance

Rectangular or Block pattern:

Radial or Star and block Pattern:

Radial or Star and Grid Pattern :

Minimum Travel Pattern:

You might also like