Online data sheet

DUSTHUNTER T100

TRANSMITTANCE DUST MEASURING DEVICES

 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

A Ordering information
Type Part no.

B DUSTHUNTER T100 On request

The exact device specifications and performance data of the product may deviate from the information provided here, and
depend on the application in which the product is being used and the relevant customer specifications.

C Our regional sales organization will help you to select the optimum device configuration.

Other models and accessories www.sick.com/DUSTHUNTER_T100

D
Product description
E The DUSTHUNTER T100 is a measuring device for dust at medium to high concentrations. Basic
measuring value is transmittance. Opacity and extinction can be calculated and displayed as well
as the dust concentration after gravimetric calibration. The device has an integrated contamina-

F tion check. The DUSTHUNTER T100 is approved according to EN 15267.

At a glance
• For medium to high dust concentrations

H
• On-board contamination check
• Automated thorough check of zero and reference point
• For small to large measuring distances

I
Your benefits
J • Easy installation, commissioning and operation
• Measurement independent of gas velocity, humidity and particle charge
• Low maintenance due to self-monitoring

K • Approved according to EN 15267

15267 14181

L
certified certified

M
N
O
P
Q
R
S
T 2 DUST MEASURING DEVICES | SICK Online data sheet | 2016-08-15 09:21:28
Subject to change without notice
 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

Fields of application
• Emissions monitoring at power plants and waste incineration plants
• Monitoring of filter systems
• Monitoring of dust load in factory halls
• Control of fresh air and exhaust air units

Detailed technical data

DUSTHUNTER T100 system
Measured values Transmittance, opacity, relative opacity, extinction, dust concentration

Performance-tested measurands Dust concentration

Measurement principles Transmittance measurement

Spectral range 450 nm ... 700 nm

Measuring ranges
Transmittance 100 ... 80 % / 100 ... 0 %
Opacity 0 ... 20 % / 0 ... 100 %
Relative opacity 0 ... 20 % / 0 ... 100 %
Extinction 0 ... 0.1   / 0 ... 2  
Dust concentration 0 ... 200 mg/m³ / 0 ... 10,000 mg/m³
The measurement depends on measuring distance and dust properties
Certified measuring ranges
Dust concentration (transmittance) 0 ... 0.1 Ext / 0 ... 0.05 Ext / 0 ... 0.2 Ext / 0 ... 0.5 Ext / 0 ... 1 Ext
Response time (t90) 1 s ... 600 s
Freely adjustable
Accuracy
± 2 %
Process temperature –40 °C ... +600 °C

Process pressure With MCU-P control unit: –50 hPa ... 2 hPa

With external purge air unit: –50 hPa ... 30 hPa
Process gas humidity Non-condensing

Duct diameter 0.5 m ... 2.5 m

2 m ... 5 m
4 m ... 12 m
Conformities Approved for plants requiring approval
2001/80/EC (13. BImSchV)
2000/76/EC (17. BImSchV)
27.BImSchV
TA-Luft (Prevention of Air Pollution)
EN 15267
EN 14181
MCERTS
2010/75/EU
Electrical safety CE

Test functions Automatic self-test (linearity, contamination, drift, aging)

Contamination limit values: warning at 20%, fault at 30%
Manual linearity test with reference filter
Options External purge air unit

DHT-T10 and DHT-T21 sender/receiver unit

Description Cross-duct measurement system analyzer unit

2016-08-15 09:21:28 | Online data sheet DUST MEASURING DEVICES | SICK 3


Subject to change without notice
 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

A Ambient temperature
Enclosure rating
–40 °C ... +60 °C

IP 66

B
Dimensions (W x H x D) 212 mm x 241 mm x 429 mm (for details see dimensional drawings)

Weight ≤ 6.5 kg

Power supply

C Voltage 24 V
Supply via control unit

D Power consumption ≤ 15 W

DHT-R0x and DHT-R1x reflector unit

E Description
Enclosure rating
Reflector unit with triple reflector

IP 66

F Dimensions (W x H x D)

Weight
212 mm x 241 mm x 364 mm (for details see dimensional drawings)

DHT-R00, DHT-R01, DHT-R02: ≤ 3 kg

MCU-N control unit

Description Unit to control the system components and to evaluate and output the data provided by them

H Ambient temperature
Enclosure rating
–40 °C ... +60 °C

IP 66

I
Analog outputs 3 outputs:
0/2/4 ... 20 mA, 750 Ω
Electrically isolated; two additional outputs if using I/O modules (option)
Analog inputs 2 inputs:

J 0 ... 20 mA
Not electrically isolated; two additional inputs if using I/O modules (option)
Digital outputs 5 relay contacts:

K 48 V, 1 A
Potential-free; for status signals
Digital inputs 4 potential-free contacts

L Interfaces and bus protocols

Ethernet Modbus TCP (via optional interface module)

M Ethernet OPC (via optional interface module)

Ethernet SOPAS ET (via optional interface module)
RS-485 Modbus RTU (via optional interface module)

N RS-485 PROFIBUS DP (via optional interface module)

RS-485 SOPAS ET (via optional interface module)

O Indication
USB SOPAS ET
LC display
Status LEDs: "Power", "Maintenance" and "Failure"

P Operation
Dimensions (W x H x D)
Via LC-display or software SOPAS ET

210 mm x 340 mm x 120 mm

Q Weight
Power supply
≤ 3.7 kg

R
Voltage 90 ... 250 V
Version with 24 V DC available as an option
Frequency 47 ... 63 Hz

S
T 4 DUST MEASURING DEVICES | SICK Online data sheet | 2016-08-15 09:21:28
Subject to change without notice
 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

Power consumption ≤ 15 W

Options Interface module(s)
I/O module(s)

MCU-P control unit

Description Unit to control the system components and to evaluate and output the data provided by them.
With integrated purge air unit.
Gas flow rate ≤ 20 m³/h

Ambient temperature –40 °C ... +45 °C

Intake temperatures for purge air
Enclosure rating IP 66

Analog outputs 3 outputs:

0/2/4 ... 20 mA, 750 Ω
Electrically isolated; two additional outputs if using I/O modules (option)
Analog inputs 2 inputs:
0 ... 20 mA
Not electrically isolated; two additional inputs if using I/O modules (option)
Digital outputs 5 relay contacts:
48 V, 1 A
Potential-free; for status signals
Digital inputs 4 potential-free contacts

Interfaces and bus protocols

Ethernet Modbus TCP (via optional interface module)
Ethernet OPC (via optional interface module)
Ethernet SOPAS ET (via optional interface module)
RS-485 Modbus RTU (via optional interface module)
RS-485 PROFIBUS DP (via optional interface module)
RS-485 SOPAS ET (via optional interface module)
USB SOPAS ET
Indication LC display
Status LEDs: "Power", "Maintenance" and "Failure"
Operation Via LC-display or software SOPAS ET

Dimensions (W x H x D) 300 mm x 455 mm x 220 mm

Weight ≤ 13.5 kg

Power supply
Voltage 90 ... 250 V
Version with 24 V DC available as an option
Frequency 47 ... 63 Hz
Power consumption ≤ 70 W
Auxiliary gas connections Purge air

Options Interface module(s)

I/O module(s)

SLV4-2 purge air unit, 2BH1300, 3-ph

Description Unit to provide dust-free air for flushing of optical surfaces

Gas flow rate 38 m³/h ... 63 m³/h

At 30 hPa counter pressure, depending on low pressure inside the filter
Ambient temperature –20 °C ... +40 °C

Enclosure rating IP 54

2016-08-15 09:21:28 | Online data sheet DUST MEASURING DEVICES | SICK 5


Subject to change without notice
 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

A Dimensions (W x H x D)

Weight
550 mm x 550 mm x 258 mm (for details see dimensional drawings)

18 kg

B
Power supply
Three-phase current 3-phase, Δ: 200 ... 240 V, 50 Hz, 2.6 A, 350 W
3-phase, Δ: 220 ... 275 V, 60 Hz, 2.3 A, 450 W

C
3-phase, Y: 345 ... 415 V, 50 Hz, 1.5 A, 350 W
3-phase, Y: 380 ... 480 V, 60 Hz, 1.3 A, 450 W
Auxiliary gas connections Purge air: 40 mm

D Test functions
Integrated components
Pressure switch (switching point –35 hPa)

2-step air filter, type Europiclon, dust capacity 200 g

E
Dimensional drawings (Dimensions in mm (inch))
F DHT-T10 sender/receiver unit

429 (16.89)
401 (15.79)
104 (4.09)
309 (12.17)

H
(2.56)

13 (.51)
65

Ø 126
205 (8.07)
200 (7.87)

(4.96)
241 (9.49)

I
Ø 100
(3.94)
Ø 11 (0.43)

J 125 (4.92)

K
208 (8.19) 168 (6.61)
355 (13.98)

L
Ø 60 (2.36)

M
212 (8.35)
208 (8.19)
202 (7.95)

N
O
P
Q
R
S
T 6 DUST MEASURING DEVICES | SICK Online data sheet | 2016-08-15 09:21:28
Subject to change without notice
 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

DHT-R0x reflector unit

364 (14.33)
336 (13.23)
104 (4.09)
244 (9.61)
(2.56)
65

Ø 126

13 (.51)
200 (7.87)

205 (8.07)
(4.96)

241 (9.49)
Ø 100
(3.94)
Ø 11 (0.43)

60 (2.36)
208 (8.19) 103 (4.06)
290 (11.42)

Ø 60 (2.36)
212 (8.35)
208 (8.19)
202 (7.95)

MCU-N control unit; wall-mounting enclosure, compact version (for non-hazardous areas only)

210 (8.27)
160 (6.30) 120 (4.72)
340 (13.39)
320 (12.60)
300 (11.81)

Meas

2016-08-15 09:21:28 | Online data sheet DUST MEASURING DEVICES | SICK 7


Subject to change without notice
 DUSTHUNTER T100
TRANSMITTANCE DUST MEASURING DEVICES

A MCU-P control unit; wall-mounting enclosure, compact version (for non-hazardous areas only)

260 (10.24) Ø 8 (0.31)

B
C
D
455 (17.91)

420 (16.54)

400 (15.75)

Meas

E
F
300 (11.81) 220 (8.66)

H SLV4-2 purge air unit, 2BH1300

I Ø 10 (0.39)

J
K
550 (21.65)
470 (18.50)

L
M
40
(1.57)

N 40
(1.57)
470 (18.50)
550 (21.65)
128 (5.04)
258 (10.16)

O
P
Q
R
S
T 8 DUST MEASURING DEVICES | SICK Online data sheet | 2016-08-15 09:21:28
Subject to change without notice
 SICK at a glance
Online data sheet

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-
tions. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.

We have extensive experience in a wide range of industries and understand their processes and require-
ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.

Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the ma-
chine life cycle and ensure safety and productivity.

For us, that is “Sensor Intelligence.”

Worldwide presence:
Contacts and other locations – www.sick.com

SICK AG | Waldkirch | Germany | www.sick.com