HYDX-6 Full Hydraulic Drilling Rig

I. A General Introduction

HYDX-6 Hydraulic Core Drilling Rig is developed on the basis of the advanced techniques in the world.
HYDX-6 is reasonable in design, excellent in performance, easy for operation and convenient for
maintenance.

1. Main Features of the rig:

The rig, equipped with tracks, has a hydraulic driving system. It

owns a brief but advanced structure, with its power head driven by a
variable motor and its speed adjustable for 2 gears. With the oil
cylinder working with a speed-changeable chain, its performance is
stable and reliable. The mast is adjustable in the range from 0° to 90°
to ensure a proper hole-drilling angle. The low gravity center of the
rig promises a steady operation. And it provides the operators with a
convenient and comfortable working circumstance with a wide view.
In short, the rig has a beautiful outline and shows a people-oriented
design idea.

1) Reliable Quality

The main parts and auxiliary equipment, including the engine, diesel
engine,
hydraulic
pump, gear
reducer and some key valves and hydraulic
accessories, are all products with well-known
brands.

2) High Efficiency

Big torque, powerful driving force, rational and

practical design, advanced controlling mode and a 6-meter-long (19.7 feet) drilling rod guarantee the high
operation efficiency of the rig.

3) Environmental Protection

The diesel engine is professionally designed to reduce noise and other contamination (The noise can not
be over 72db), which makes the rig proper to be operated in urban areas.

4) Energy Saving

Any change of the parameters mentioned above can be made without prior notification.
The advanced technique of loading-sensor-controlling
helps the rig reduce its consumption of driving force
and heat discharge to the minimum extent.

HYDX-6 has an outstanding external appearance, a

compacted structure, a reliable function, and a flexible
operating system. All these factors have made the rig
the best choice among the same products in both
domestic and abroad markets.

2. Application Range

HYDX-6 can be applied to both slant and vertical drilling.

Being a rig equipped with diamond and the carbide alloy
bit drilling, it can be used in the fields of geology,
metallurgy, coal mining, nuke industry and hydrology
measuring.

II. Main Performance Parameters of HYDX-6

The figures in these tables have been calculated, based on field experiences, and may be reasonably
expected. Actual drilling capacity will depend on in-hold tools and conditions, drilling techniques and
equipment used.
Cummins 6CTA8.3-C240 (turbocharged
Model
and charge water cooled)

Diesel Engine Displacement 8.3L (2.19 US Gallons)

Power 179kW (240HP)

Rated RPM(Factory setting) 2200rpm

BQ 2000 m(6560 feet)

NQ 1600 m(5248 feet)

Drilling Capacity
HQ 1300 m(4264 feet)

PQ 1000 m(3280 feet)

Drill Head Rotation Motor
Double Hydraulic Motor
-variable and Reversible
Maker: SAUER-DANFOSS
RPM Two Shifts/ Stepless Change 0-1100 RPM

Any change of the parameters mentioned above can be made without prior notification.
 Ratios 1st 8.776:1; 2nd 2.716:1

Head Opening way sidewise sliding way with hydraulic drive

Hydraulically opened, Disc Spring

Hydraulic Chuck(PQ) Clamping, Normally C Closed Type
Axial Holding Capacity of 222 400 N

Max. Torque 6400 N·m(4717 lbf·ft)

Hold Diameter 121 mm(4.76 inch)

Max. Lifting capacity of Spindle 220 kN(49456 lbf)

Max. Feeding Power 110 kN(24728 lbf)

Hydraulic pump:
Maker: DANFOSS
Axial Piston variable displacement
Primary Pump 1st Pump：200LPM at 31.5MPa
Triplex pump for driving of rotator,
2nd Pump：120LPM at 28MPa
winch mud pump & leveling jacks.
3rd Pump： 102 LPM at 16MPa
With load sensing system.

Hydraulic Tank Capacity 420 L (111 US Gallons)

Hoisting Speed (single wire) 38-70m/min(bare drum)

Capacity of Main Hoisting force (single wire) 120kN(26976 lbf)

Hoist Steel Wire Diameter 22 mm(0.86 inch)

Steel Wire Length 50 m(164 feet)

Hoisting Force (single wire) 15 kN(3372 lbf) (bare drum)

Capacity of Wireline
Steel Wire Diameter 6 mm(0.24 inch)
Hoist
Steel Wire Length 2000 m(6560 feet)

Mast Height 12 m(39.4 feet)

Mast Adjusting Angle 0°—90°

Drilling Angle 45º off horizontal to 90ºvertical down

Feeding Stroke 3800 mm(150 inch)

Mast
Slippage Stroke 1100 mm(59 inch)

Feed Pull 22000kg(48510 lb)

Feed Thrust 11000kg(24255 lb)

Rod Pull 3m or 6m(9.84feet or 19.68feet)

Mud Pump
Type Reciprocating Pump Triplex Plunger

Model BW250

Any change of the parameters mentioned above can be made without prior notification.
 Stroke 100mm(3.9 inch)

250,145, 90, 52 L/min

Output volume
(66, 38, 24, 14 US Gallons/min)

2.5, 4.5, 6.0, 6.0 Mpa

Discharge pressure
(363, 653, 870, 870 psi)

55.5-117.5 mm(2.19-4.63 inch)

Foot Clamp Clamping Scope
through hole Ф154mm(6.06 inch)

Weight 14500 Kg(31967 lb)

6250×2220×2500mm
Others Transport Dimensions (L × W ×H )
(246×87.4×98.42 inch)

Transport Way Steel Crawler

Any change of the parameters mentioned above can be made without prior notification.