GSM HTTP AT Commands Manual V1.1 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 15

GSM

Quectel Cellular Engine

HTTP Service
AT Commands
GSM_HTTP_ATC_V1.1
HTTP Service AT Commands

Document Title HTTP Service AT Commands

Version 1.1

Date 2012-06-13

Status Released

Document Control ID GSM_HTTP_ATC_V1.1

l
General Notes

e
Quectel offers this information as a service to its customers, to support application and

t l
engineering efforts that use the products designed by Quectel. The information provided is

c a
based upon requirements specifically provided to Quectel by the customers. Quectel has not

i
undertaken any independent search for additional relevant information, including any

e t
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Quectel within a larger electronic system remains the responsibility of

u n
the customer or the customer’s system integrator. All specifications supplied herein are

Q fide
subject to change.

Copyright
This document contains proprietary technical information which is the property of Quectel
Limited., copying of this document and giving it to others and the using or communication of

n
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration of

o
a utility model or design. All specification supplied herein are subject to change without
notice at any time.

C
Copyright © Shanghai Quectel Wireless Solutions Co., Ltd. 2012

GSM_HTTP_ATC_V1.1 -1-
HTTP Service AT Commands

Contents

Contents ............................................................................................................................................ 2
0. Revision history ............................................................................................................................ 3
1. Introduction ................................................................................................................................... 4
1.1. Reference............................................................................................................................. 4
2. AT Commands for HTTP Service ................................................................................................. 5
2.1. Overview of AT Commands for HTTP Service .................................................................. 5
2.2. Detailed Description of AT Commands for HTTP Service ................................................ 5

l
2.2.1. AT+QHTTPURL Set HTTP Server URL ............................................................... 5
2.2.2. AT+QHTTPGET Send HTTP GET Request .......................................................... 6

e
2.2.3. AT+QHTTPREAD Read HTTP Server Response ................................................. 6

t l
2.2.4. AT+QHTTPPOST Send HTTP POST Request .................................................... 7

c
2.2.5. AT+QHTTPDL Download file from http server .................................................... 8

i a
3. Supported unsolicited result codes ................................................................................................ 9

e t
3.1. Summary of CME ERROR Codes ...................................................................................... 9
4. Examples ..................................................................................................................................... 11

u n
4.1. Send HTTP GET Request.................................................................................................. 11
4.2. Send HTTP POST Request................................................................................................ 12

Q fide
4.3. Download file form HTTP server...................................................................................... 13

o n
C
GSM_HTTP_ATC_V1.1 -2-
HTTP Service AT Commands

0. Revision history

Revision Date Author Description of change


1.00 2009-07-06 Jay XIN Initial
1.1 2012-06-04 Will SHAO Added Command AT+QHTTPDL.

t e l l
e c t i a
u
Q fide n
o n
C
GSM_HTTP_ATC_V1.1 -3-
HTTP Service AT Commands

1. Introduction

Quectel Module has an internal TCP/IP stack that is driven by AT commands and enables the host
application to easily access the Internet service. It includes TCP service, UDP service, FTP service
and HTTP service, etc. This document is a reference guide to all the AT commands and responses
defined for HTTP Service. The advantage of this solution is that it eliminates the needs for the
application manufacturer to implement own HTTP protocol, thus minimizing cost and time to
integrate Internet connectivity into a new or existing host application.

l
1.1. Reference

t e l
Table 1: Reference

c i a
SN Document name Remark

e t
[1] GSM_TCPIP_AN.pdf TCPIP Application Notes

u
[2] RFC 2616

Q fide n
o n
C
GSM_HTTP_ATC_V1.1 -4-
HTTP Service AT Commands

2. AT Commands for HTTP Service

2.1. Overview of AT Commands for HTTP Service

Command Description
AT+QHTTPURL Set HTTP Server URL
AT+QHTTPGET Send HTTP GET Request

l
AT+QHTTPREAD Read HTTP Server Response
AT+QHTTPPOST Send HTTP POST Request

e
AT+QHTTPDL Download file from http server

ct l
Execution of above HTTP related AT commands will switch to data mode. To switch back to AT

a
mode, you can input “+++” and this will terminate the current HTTP AT command. The interval

e t i
time between the first “+” and the character before the first “+” MUST NOT be less than 500 ms
and the interval time between the last “+” and the character next to the last “+” MUST NOT be

u n
less than 500 ms and the interval time between each “+” MUST be less than 1000 ms.

Q fide
2.2. Detailed Description of AT Commands for HTTP Service

2.2.1. AT+QHTTPURL Set HTTP Server URL

n
AT+QHTTPURL Set HTTP Server URL

o
Test Command Response
AT+QHTTPURL=? +QHTTPURL: (1-450),(1-65535)

C
OK
Parameter
See Write Command
Write Command Response
AT+QHTTPURL=<url_len CONNECT
>,<input_time>
If error is related to ME functionality:
ERROR
+CME ERROR: <err>
Parameter
<url_len> The length in bytes of the URL.
<input_time> Maximum time in seconds to input
URL.

GSM_HTTP_ATC_V1.1 -5-
HTTP Service AT Commands

Reference If sending HTTP GET Request, for example, input URL path:
http://api.efxnow.com/DEMOWebServices2.8/Service.asmx/Echo?
Message=helloquectel
If send HTTP POST Request, for example, input URL path:
http://api.efxnow.com/DEMOWebServices2.8/Service.asmx/Echo
Server address must be provided as IP address in the standard
dot-format (e.g. “192.168.1.1”) or as server address names
resolvable by a DNS server (e.g. “api.efxnow.xom”).

2.2.2. AT+QHTTPGET Send HTTP GET Request

l
AT+QHTTPGET Send HTTP GET Request

t e
Test Command Response

l
AT+QHTTPGET=? +QHTTPGET: (1-65535)

c i a
OK

e t
Parameter

u n
See Write Command
Write Command Response

Q fide
AT+QHTTPGET=<to_read OK
_time>
If error is related to ME functionality:
ERROR
+CME ERROR: <err>

n
Parameter
<to_read_time> Time in seconds. AT+QHTTPREAD will be

o
invalid if the idle time after AT+QHTTPGET
is longer then the time of <to_read_time>.

C
Reference

2.2.3. AT+QHTTPREAD Read HTTP Server Response

AT+QHTTPREAD Read HTTP Server Response


Test Command Response
AT+QHTTPREAD=? +QHTTPREAD: (1-65535)

OK
Parameter
See Write Command
Write Command Response
AT+QHTTPREAD=<wait_t CONNECT
ime> <data>

GSM_HTTP_ATC_V1.1 -6-
HTTP Service AT Commands

OK

If error is related to ME functionality:


ERROR
+CME ERROR: <err>
Parameter
<wait_time> Time in seconds. It will close HTTP session when
timeout.
<data> The data of HTTP server responds.
Reference

e l
2.2.4. AT+QHTTPPOST Send HTTP POST Request

t l
AT+QHTTPPOST Send HTTP POST Request

c a
Test Command Response

i
AT+QHTTPPOST=? +QHTTPPOST: (1-29696),(1-65535),(1-65535)

u e n t
OK
Parameter

Q fide
See Write Command
Write Command Response
AT+QHTTPPOST=<body_s CONNECT
ize>,<input_time>,<to_read <body_data>
_time> OK

n
If error is related to ME functionality:

o
ERROR
+CME ERROR: <err>

C
Parameter
<body_size> Size in bytes of the body data to POST.
<input_time> Maximum time in seconds to input the body
data.
<to_read_time> Time in seconds. AT+QHTTPREAD will be
invalid if the idle time after
AT+QHTTPGET is longer then the time of
<to_read_time>
<body_data> Input the body data to POST from UART.
Reference

GSM_HTTP_ATC_V1.1 -7-
HTTP Service AT Commands

2.2.5. AT+QHTTPDL Download file from http server

AT+QHTTPDL Download file from http server


Test Command Response
AT+QHTTPDL=? +QHTTPDL:"filename"[,<length>[,(1-65535)]]

OK
Parameter
See Write Command
Write Command Response

l
AT+QHTTPDL= OK
“<filename>”[,<length>

e
[, wait_time]] Finally, if download the file successfully, response

t l
+ QHTTPDL:<dl size>,<content-length>,<errcode>

c a
If error is related to ME functionality:

e t i
ERROR
+CME ERROR: <err>

u n
Parameter
<filename> The path of the file to be stored, such as

Q fide
“RAM:1.txt”
<length> The maximum size of the file to be download.
Default is 10240. Unit: byte. It is only used
for RAM file.
<wait_time> Time in seconds. It will close HTTP session

n
when timeout.

o
<dl size> The length of data has been download.
< content-length> The content length. If the content-length is
unknown, then set it to -1.

C
<errcode> If all data has been download, the <errcode>
is 0, else it is a numeric to indicate the type of
error, please refer to the chapter 3.
<err> A numeric to indicate the type of error,
please refer to the chapter 3.
Reference

GSM_HTTP_ATC_V1.1 -8-
HTTP Service AT Commands

3. Supported unsolicited result codes

3.1. Summary of CME ERROR Codes

Final result code +CME ERROR: <err> indicates an error related to mobile equipment or network.
The operation is similar to ERROR result code. None of the following commands in the same
Command line is executed. Neither ERROR nor OK result code shall be returned. The following
<err> is just the new <err> code for HTTP. About other <err> codes, please refer to [1].

l
<err> values used by common messaging commands:

e
Code of <err> Meaning

t l
3801 HTTP time out
3802 HTTP busy

c a
3803 HTTP UART busy

e t i
3804 HTTP get no request
3805 HTTP network busy

u n
3806 HTTP network open failed
3807 HTTP network no config

Q fide
3808 HTTP network deactive
3809 HTTP network error
3810 HTTP url error
3811 HTTP empty url

n
3812 HTTP ip addr error
3813 HTTP DNS error

o
3814 HTTP socket create error
3815 HTTP socket connect error

C
3816 HTTP socket read error
3817 HTTP socket write error
3818 HTTP socket close
3819 HTTP data encode error
3820 HTTP data decode error
3821 HTTP toread timeout
3822 HTTP reponse failed
3823 incoming call busy
3824 voice call busy
3825 input timeout
3826 wait data timeout
3827 wait HTTP response timeout
3828 alloc memory fail
3829 HTTP need relocation

GSM_HTTP_ATC_V1.1 -9-
HTTP Service AT Commands

4000 Exceed max length


4001 Open file fail
4002 Write file fail
4003 Get size fail
4004 Read fail
4005 List file fail
4006 Delete file fail
4007 Get Disk info fail
4008 No space
4009 Time out

l
4010 File not found
4011 Driver full over

e
4012 File already exist

t l
4013 Invalid parameter

c
4014 Driver error

i a
4015 Create fail

e t
4016 Access denied

u n
4017 File too large

Q fide
o n
C
GSM_HTTP_ATC_V1.1 - 10 -
HTTP Service AT Commands

4. Examples

4.1. Send HTTP GET Request

AT+QIFGCNT=0
OK

AT+QICSGP=1,"CMNET" //Set APN


OK

e l
AT+QIREGAPP // Optional

t
OK

c a l
AT+QIACT // Optional

i
OK

u e n t
AT+QHTTPURL=79,30 //Set the URL

Q fide
CONNECT
….
//for example, input 79 bytes:
http://api.efxnow.com/DEMOWebServices2.8/Service.asmx/Echo?Message=helloquectel

n
OK

o
AT+QHTTPGET=60 //Send HTTP GET Request
OK

C
AT+QHTTPREAD=30 //Read the response of HTTP server.

CONNECT
…. // Output the response data of HTTP server to UART.

//for example, UART outputs:


<?xml version="1.0" encoding="utf-8"?>
<string xmlns="https://api.efxnow.com/webservices2.3">Message='helloquectel' ASCII:104 101
108 108 111 113 117 101 99 116 101 108 </string>
OK

AT+QIDEACT // Deactivate GPRS PDP connect.


DEACT OK

GSM_HTTP_ATC_V1.1 - 11 -
HTTP Service AT Commands

4.2. Send HTTP POST Request

AT+QIFGCNT=0
OK

AT+QICSGP=1,"CMNET" //Set APN


OK

AT+QIREGAPP //Optional
OK

l
AT+QIACT //Optional

e
OK

ct l
AT+QHTTPURL=58,30 //Set the URL

e t i a
CONNECT
….

u n
//for example, input 58 bytes:
http://api.efxnow.com/DEMOWebServices2.8/Service.asmx/Echo

Q fide
OK

AT+QHTTPPOST=18,50,10
// POST the data whose size is 18 Bytes and the maximum

n
latency time for inputting is 50s. It is recommended to set

o
the latency time as long as enough to download all the
data in the latency time.
CONNECT

C
//This means it is ready to receive data from UART. And
DCD has been set to low. Receive data from UART and
not echo.
//for example, input 18 bytes: Message=helloworld
OK
//This means all data has been received over, and DCD is set to high.

AT+QHTTPREAD=30 //Read the response of HTTP server.

CONNECT
…. //Output the response data of HTTP server to UART
//for example, UART outputs:
<?xml version="1.0" encoding="utf-8"?>
<string xmlns="https://api.efxnow.com/webservices2.3">Message='helloworld' ASCII:104 101
108 108 111 119 111 114 108 100 </string>
GSM_HTTP_ATC_V1.1 - 12 -
HTTP Service AT Commands

OK

AT+QIDEACT //Deactivate GPRS PDP connect.


DEACT OK

4.3. Download file form HTTP server

AT+QIFGCNT=0
OK

l
AT+QICSGP=1,"CMNET" //Set APN

e
OK

t l
AT+QIREGAPP //Optional

c a
OK

e t i
AT+QIACT //Optional

u n
OK

Q fide
AT+QHTTPURL=29,30 //Set the URL

CONNECT
….
//for example, input 29 bytes:

n
http://api.efxnow.com/1.TXT

o
OK

C
AT+QHTTPGET=60 //Send HTTP GET Request
OK

,max size is
AT+QHTTPDL=“RAM:1.TXT”,1024 //Download the file to“RAM:1.TXT”
1024 bytes

+ QHTTPDL:100,100,0

OK

GSM_HTTP_ATC_V1.1 - 13 -
Shanghai Quectel Wireless Solutions Co., Ltd.
Room 501, Building 13, No.99, Tianzhou Road, Shanghai, China 200233
Tel: +86 21 5108 6236
Mail: [email protected]

You might also like