Scribd
Upload
487 views1 page

Double Angle Bar

This document summarizes the structural analysis of a steel beam member. It provides the design codes used, material properties, beam dimensions, applied loads, and results of checking the member for various limit states including slenderness, axial strength, bending strength, combined tension and bending strength, and shear strength. All limit state checks showed the member is within allowable limits and is OK for use in this application.

Uploaded by

Shadin Asari Arabani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
487 views1 page

Double Angle Bar

This document summarizes the structural analysis of a steel beam member. It provides the design codes used, material properties, beam dimensions, applied loads, and results of checking the member for various limit states including slenderness, axial strength, bending strength, combined tension and bending strength, and shear strength. All limit state checks showed the member is within allowable limits and is OK for use in this application.

Uploaded by

Shadin Asari Arabani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

midas Gen Steel Checking Result

Company PMENG'G TECHNIC INC. Project Title


Author Shadz File Name C:\...\Desktop\FLATFORM.mgb
z
1. Design Information

0.0047625
Design Code : AISC(13th)-LRFD05
y

0.0508
Unit System : kN, m
Member No :1
Material : A36 (No:1) 0.0047625

(Fy = 248211, Es = 199948024) 0.0508

Section Name : 2L2X2X3/16X3/8 (No:1)


(Rolled : 2L2X2X3/16X3/8).
Member Length : 1.30000

2. Member Forces Depth 0.05080 Web Thick 0.00476


Axial Force Fxx = 0.00000 (LCB: 1, POS:J) Flg Width 0.05080 Flg Thick 0.00476
BTB Spacing 0.00952
Bending Moments My = -1.1971, Mz = 0.00000
Area 0.00093 Asz 0.00032
End Moments Myi = -1.1971, Myj = -1.1971 (for Lb) Qyb 0.00066 Qzb 0.00129
Iyy 0.00000 Izz 0.00000
Myi = -1.1971, Myj = -1.1971 (for Ly) Ybar 0.05556 Zbar 0.03655
Mzi = 0.00000, Mzj = 0.00000 (for Lz) Syy 0.00001 Szz 0.00001
ry 0.01554 rz 0.02456
Shear Forces Fyy = 0.00000 (LCB: 1, POS:I)
Fzz = 5.52517 (LCB: 1, POS:J)

3. Design Parameters
Unbraced Lengths Ly = 1.30000, Lz = 1.30000, Lb = 1.30000
Effective Length Factors Ky = 1.00, Kz = 1.00
Moment Factor / Bending Coefficient
Cmy = 1.00, Cmz = 1.00, Cb = 1.00
4. Checking Results
Slenderness Ratio
L/r = 83.6 < 300.0 (LCB: 1)............................................. O.K
Axial Strength
Pr/Pc = 0.000/207.536 = 0.000 < 1.000 ...................................... O.K
Bending Strength
Mry/Mcy = 1.19712/1.37643 = 0.870 < 1.000 ................................... O.K
Mrz/Mcz = 0.00000/2.29144 = 0.000 < 1.000 ................................... O.K
Combined Strength (Tension+Bending)
Pr/Pc = 0.00 < 0.20
Rmax = Pr/(2*Pc) + [Mry/Mcy + Mrz/Mcz] = 0.870 < 1.000 ............................ O.K
Shear Strength
Vry/Vcy = 0.000 < 1.000 ...................................................... O.K
Vrz/Vcz = 0.085 < 1.000 ...................................................... O.K

Modeling, Integrated Design & Analysis Software Print Date/Time : 10/10/2017 16:23

You might also like