Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Boston Side Guard Ordinance

    Uploaded by

    bcgp
    Boston Side Guard Ordinance Chapter IV Contracts 4-8 Requiring City Vendors to Protect Unprotected Road Users

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Boston Side Guard Ordinance

    Uploaded by

    bcgp
    1K views4 pages
    Boston Side Guard Ordinance Chapter IV Contracts 4-8 Requiring City Vendors to Protect Unprotected Road Users

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Boston Side Guard Ordinance Chapter IV Contracts 4-8 Requiring City Vendors to Protect Unprotected Road Users

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views4 pages

    Boston Side Guard Ordinance

    Uploaded by

    bcgp
    Boston Side Guard Ordinance Chapter IV Contracts 4-8 Requiring City Vendors to Protect Unprotected Road Users

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Boston Side Guard Ordinance

    Chapter IV Contracts
    4-8 Requiring City Vendors to Protect Unprotected Road Users

    4-8.1 Purpose.

    Vehicles covered by this ordinance shall be so constructed and/or equipped as to offer effective
    protection to unprotected road users against the risk of falling under the sides of the vehicle and
    being caught under the wheels.

    (Ord. 2014 c. 14)

    4-8.2 Definitions.

    The words defined in this ordinance shall have the meanings set forth below whenever they
    appear in this section unless the context in which they are used clearly requires a different
    meaning, or a different definition is prescribed for a particular paragraph or provision.

    (i) ​Approval of a vehicle​ means the approval of a complete vehicle type with regard to its
    lateral protection.

    (ii) ​City​ means the City of Boston.

    (iii) ​Department(s)​ shall mean those City of Boston Departments, Authorities, Agencies,
    Commissions and any other instrumentality acting on behalf of another (“Awarding
    Authorities”) under the supervision of the Mayor or persons appointed by him/her.

    (iv) ​Contract​ means the contract between a Vendor and a Department resulting from a request
    for proposals or an invitation for bids issued by the City to do any work or to make any purchase.

    (v) ​Gross weight​ means the sum of the weights transmitted to the road surface by all the
    wheels of the vehicle.

    (vi) ​Large vehicle​ means a motor vehicle with a gross weight exceeding ten thousand
    (10,000) lbs; or a trailer with an unladen mass exceeding ten thousand (10,000) lbs; or a
    semi-trailer with a gross weight exceeding twenty-six thousand (26,000) lbs.

    (vii) ​Lateral protective device​ means an apparatus installed on large vehicles between the
    front and rear wheels to help prevent injuries to unprotected road users, particularly from falling
    underneath the vehicle.
    (viii) ​Mayor​ shall mean the Mayor or persons designated by him/her.

    (ix) ​Otherwise qualified​ means any Vendor that meets all other criteria for the award of a
    Contract.

    (x) ​Unladen mass​ means the weight of the vehicle in running order, unoccupied and
    unloaded, but complete with fuel, coolant, lubricant, tools, and spare wheel, if supplied by the
    vehicle manufacturer as standard equipment.

    (xi) ​Unprotected road users​ mean pedestrians, cyclists, or motorcyclists using the road in
    such a way that they are liable to fall under the sides of the vehicle and to be caught under the
    wheels.

    (xii) ​Vendor​ means any firm, vendor, contractor, or supplier of goods and/or services to the
    City of Boston, and any of its subcontractors.

    (Ord. 2014 c. 14)

    4-8.3 Requirements for Large Vehicles.

    When any officer or board in charge of a Department or other awarding agency of the City
    issues requests for proposals or invitations for bids to do any work or make any purchase, said
    officer or board shall contract with a responsible and eligible Vendor that has also installed, or
    that demonstrates that it will install, side under-ride guards, ​convex mirrors, and appropriate
    warning signage on all large vehicles it uses or will use within the City of Boston in connection
    with the Contract in preference of otherwise qualified Vendors.

    (Ord. 2014 c. 14)

    4-8.4 Policy Implementation.

    Every Large vehicle or a conventional cab configuration in which more than half (1/2) of the
    engine length is forward of the foremost point of the windshield base and the steering wheel hub
    is in the forward quarter (1/4) of the vehicle length used by a Vendor in connection with a
    Contract shall be equipped with convex mirrors, cross-over mirrors, decals, and side under-ride
    guards affixed to the sides of such vehicles in a manner consistent this section and with rules and
    regulations further promulgated by the Boston Transportation Department, the Boston Police
    Department, and the Inspectional Service Department. As future technical innovations to
    improve safety for vulnerable road users become available, the City will make efforts to test and
    update these requirements.

    (Ord. 2014 c. 14)


    4-8.5 Technical Specifications for the Equipment of Lateral Protective Devices,
    Convex Mirrors and Convex Cross-over Mirrors, and Safety Decals.

    (a) ​Lateral Protective Devices.​ Large vehicles must be constructed or equipped in such a way
    as to offer, throughout their length, effective protection to unprotected road users against the risk
    of falling under the side of the vehicle and being caught under the wheels. This requirement will
    be considered satisfied either

    1. If the vehicle is equipped with a special lateral protective device (side under-ride guard )
    in accordance with the requirements of Section ​4-8.5​b

    2. If the vehicle is so designed and/or equipped at the side that, by virtue of their shape and
    characteristics, its component parts can be incorporated and/or regarded as replacing the lateral
    protective device. Components whose combined function satisfies the requirements set out in
    Section ​4-8.5​b below are considered to form a lateral protective device.

    (b) ​Technical Specifications.​ The lateral protective device can use horizontal rails or a
    continuous flat surface that meets the following dimensional requirements:

    1. The lower edge of the lateral protective device shall at no point be more than twenty-one
    and one-half (21.5) inches above the ground

    2. The upper edge of the lateral protective device shall not be more than fourteen (14)
    inches below that part of the structure of the vehicle, cut or contracted by a vertical plane
    tangential to the outer surface of the tires, excluding any bulging close to the ground

    3. Not more than twelve (12) inches to the rear of the vertical plane perpendicular to the
    longitudinal plane of the vehicle and tangential to the outer surface of the tire on the wheel
    immediately forward of the guard

    4. The rearward edge of the lateral protective device shall not be more than twelve (12)
    inches forward of the vertical plane perpendicular to the longitudinal plane of the vehicle and
    tangential to the outer surface of the tire on the wheel immediately to the rear

    5. The lateral protective device shall not increase the overall width of the large vehicle and
    the main part of its outer surface shall not be more than five (5) inches inboard from the
    outermost plane (maximum width) of the vehicle.

    6. Every lateral protective device shall be essentially rigid and securely mounted. They shall
    not be liable to loosening due to vibration in normal use of the vehicle. The lateral protective
    device shall be considered suitable if it is capable of withstanding a force of four hundred forty
    (440) pounds applied perpendicularly to any part of its surface by the center of a ram the face of
    which is circular and not more than eight and one-half (8.5) inches in diameter, and during such
    application

    7. No part of the side under-ride guard shall be deflected by more than six (6) inches; and,

    8. No part of the side under-ride guard which is less than ten (10) inches from its rearmost
    part shall be deflected by more than one and one-quarter (1.25) inches.

    (c) ​Convex Mirrors.​ Large vehicles must be equipped with convex mirrors to enable the
    operator of the large vehicle to see all points on an imaginary horizontal line which:

    1. Is three (3) feet above the road;

    2. Is one (1) foot directly forward from the midpoint upon the longitudinal axis of the front
    of such large vehicle; and extends the full width of such large vehicl​e

    (d) ​Cross-Over Mirrors.​ Large vehicles must be equipped with convex cross-over mirror on
    the front of the vehicle to enable the operator of the large vehicle with a conventional cab
    configuration in which at least more than half (1/2) of the engine length is forward of the
    foremost point of the windshield base and the steering wheel hub is in the forward quarter (1/4)
    of the vehicle length to allow the driver to see:

    1. Any person or object at least three (3) feet tall passing in front of the vehicle.

    2. The area from the front bumper to where direct vision is possible.

    (e) ​Safety Decals.​ Large vehicles must be equipped with a minimum of three (3) safety decals
    on the rear and ​sides​ that warn pedestrians and cyclists of blind spots:

    1. Decals should be ‘safety yellow’ in color

    2. Decals should include language or images warning of the blind spot locations on the
    vehicle.

    3. Decals should be placed, when possible, on or near the lateral protection devices.

    (Ord. 2014 c. 14)

    You might also like