Simple Simon and Company

Simple Maxi Skirt

Sewing Pattern

Two girls. Same name. One mission.

Teach the world to sew.
 Simple Maxi Skirt Instructions Put It All Together

This great fitting and comfortable maxi skirt is a perfect project for • Print out pattern page
beginners and experts alike. Not only is it a quick sew but it is a 1 to test your printer.
garment that you are sure to love and wear often. With the exposed Ensure that you do not
elastic waistband and subtle A line flare, it will quickly become one of scale or resize when
your go-to skirts! you print by measur-
ing the 4”x 4” square.
Some printers require
Simple Simon and Company Size Chart the selection “without
XS S M L XL XXL borders” to get to the
Waist proper 100% scale.
26” 28” 30” 32” 34” 36”
• Cut on the solid line
Hip 35” 37” 39” 42” 44” 46” that borders the pages
1/2” from the paper
2” wide edges. A paper cutter
elastic 24” 26” 28” 30” 32” 34”
will make this process
quick and easy. (It’s
Materials: even easier if you cut
only the top and right
• sewing machine or serger sides of each page.)
• sewing scissors • Tape the pages togeth-
• sewing pins er, matching diamond
• thread to match symbols.. There is no
• 2” elastic according to chart above overlap inside the
borders.
• Knit Fabric: 2 ½ yards OR 4-½ yards if using a knit directional print
• Trace desired size(s)
Tools & Notions onto pattern tracing
paper, or cut out the
Scissors appropriate size pat-
Universal Sewing needle size 90/14 tern pieces just as you
Thread (preferably that matches your bias tape) would a pre-printed
Sewing machine pattern.
Iron
Pins

Simple Maxi Skirt | ©2015 Simple Simon and Company 2

Terms of Use Tips for Measuring Yourself:
All designs ©2015 Simple Simon and Company For this maxi skirt you will need two measurements--your natural waist
All designs, photographs and images protected by copyright law. No part measurement and a full-hip measurement. To find these two measure-
of this pattern may be reproduced in any form except for use by the ments you will need a tape measure and a friend (it’s really hard to get
purchaser. All rights reserved. accurate measurements just yourself--so find a partner). You will also
need to measure yourself in undergarments that you will be wearing
We love Handmade Small Business with this skirt and not clothing to get the most accurate measurements.
Let’s start with natural waist first.
Feel free to hand make garments in your home from Simple Simon and
Company Patterns for sale. Please include the name of the design and Waist Measurement:
“Design by Simple Simon and Company” on your tag or in your online
listing. Let us know, too, so we can share! • Using the tape measure like a belt, measure the circumference of your
waist. To find your natural waist place your hand on your hip and
Do Not Copy bend to the side. As you do this your hand will naturally move into
the part of your body that creases. This creasing part is your natural
This pattern and instructions are protected by copyright law. Do not waist. (Think of the end of the song, “I’m a Little Teapot” and the “tip
email copies of this pattern to your friends and family; instead, please me over” part--that is the motion described above.) Place the tape
refer them to our website so they can purchase a copy for themselves. measure on that crease and wrap the tape measure snugly (but not
Thank you! tightly) around your waistline keeping the tape measure in a straight
horizontal line or as level as you can (having the tape measure “tilted”
Contact Simple Simon can alter measurements). Remember not to hold your breath, or
and Company “suck in” as this measurement will not be accurate. Record the natural
waist measurement.
Have questions or comments
about this pattern? Contact Hip Measurement:
simplesimonandco@
gmail.com or visit www. • Using the tape measure like a belt, measure the circumference of your
SimpleSimonandCo.com for hips. This hip measurement should be the fullest part of your lower
tutorials, news, and our online body and is naturally about 7-9” lower than your natural waist, but
shop. do not fear if it is not. To find this measurement, place the tape on
the fullest part of your hip/seat and wrap the tape snugly (but not
tightly) around your waistline keeping the tape measure in a straight
horizontal line as level as you can.

Working with Knit Fabrics

Our first piece of advice is do not fear knit fabrics! It is a great fabric to
work with because of its ease of wear and its drape. If you have a serger
Simple Maxi Skirt | ©2015 Simple Simon and Company 3
 it will be helpful but you CAN sew knits on a regular sewing machine. fabric instead of putting a hole in it. A twin needle is also helpful but not
This maxi skirt pattern is meant to be a beginner’s pattern for working necessary. This needle mimics the stitches of a coverstitch machine (two
with knits and we will show you all the steps that go into its construction. rows of stitching) and can make your skirt look more professional. You
But, let’s first talk about knit fabrics tips that have helped us over the can also invest in a walking foot, which is a sewing machine foot that
years. allows you to drop the feed dogs (the part of the sewing machine that
pulls the fabrics through the machine) and prevents the knits from get-
Tips for Working with Knits: ting sucked into the machine and getting caught in the feed dogs. We
don’t use a walking foot when sewing with knits, but some find them
• Pre-wash and dry all knit fabrics. They do have a tendency to shrink extremely helpful!
up and we don’t want your maxi skirt to be a midi length when you The most important tip to know when sewing with knit fabrics on a regu-
wash it the first time. lar machine is that you need to use a zig zag stitch or a “stretch stitch”
• Do not stretch the knit while pinning and cutting out your pattern. (check your sewing machine manual). This allows the seam to stretch a
Lay the knit on a counter or long table and allow the fabric to pull bit along with the fabric. You also might want to lengthen (we lengthen
itself back into place. Then lay pattern pieces on top and pin on. to 3 or 3.5 mm) your stitch-length and lower your sewing machine ten-
Carefully cut not allowing the fabric to stretch. You can use a rotary sion a little bit to avoid puckers and waves in the knit fabric. You can test
cutter, mat and ruler to cut out your pattern as well. your stitching on a knit scrap to help you get the tension and stitch length
correct before beginning the pattern.
• There are two kinds of knit: 2- way stretch and 4-way stretch knit.
There are also blends of both kinds of knit fabrics. We recommend Serger Tips and Tricks
any type of knit for this project. But, if you are using strictly 2-way
stretch knit, you will want to cut out your skirt so that the width • Stitching knits on a serger (sometimes referred to as an overlock
of the skirt is the stretching width-wise (with your body) and not machine) is our preferred method although we have sewn knits on
vertically. You can test this by pulling on the fabrics and seeing which regular machines for years. Sergers provide the seams room to stretch
way your fabric will stretch. along with the fabrics and also encase these seams for a professional
• We like to use a fusible hem tape or stay tape when sewing hems look to your garments.
or other crucial seams with knit fabrics. This tape comes in various • As each serger (overlocker) is different our best suggestion is to read
widths and has a fusible side that you can iron to the bottom of the your manual or to take a class from a local dealer. These classes can
skirt before hemming. Then, when the skirt is turned up the knit is help with things like tension and stitch length for getting great seams
stable and is less likely to stretch when sewing. on your skirt.
• Pressing knit hems with steam can help reduce waviness.

Sewing Machine Tips and Tricks for Working with

Knits
There are a few tools you will want to invest in when sewing knit fabric.
The first is a ball point needle (sometimes called a stretch needle). This
needle has a rounded tip and can push between the loops in the knit
Simple Maxi Skirt | ©2015 Simple Simon and Company 4
 Either method will work for the pattern and this choice depends
Pattern Construction on personal preference.

Cutting Instructions
Cut out the pattern according to your size when measuring. You
should have one skirt front and one skirt back. If you are between sizes,
go with your hip measurement as you can adjust the elastic for your
waistband to fit.

#3. Take your waistband that you stitched in step 3 and divide it into
4 equal quadrants. An easy way to do this is to fold it in half
Place pattern piece on fold.
and place one sewing pin in each of these sections. Then, fold the
waistband in half the other way and place one pin in each of these
sections. Your waistband should look like the illustration below.

Sewing Instructions
#1. Using a serger (or sewing machine on the stretch stitch), place
your skirt front and skirt back right sides together and stitch as the
illustration below, using 1/2” seam allowance.

#4. Repeat step 4 with your skirt, placing a pin in each of the four
sections making sure that you make a mark for the elastic seam in
the center back of the skirt.

#2. Next take your 2” elastic and stitch into a circle to form the waist-
band. Some people prefer to stitch with right sides of the elastic
together (method #1 left, below) and others prefer to lay one side
of the elastic on top of the other and stitch creating a more flat
surface (method #2 right, below).

Simple Maxi Skirt | ©2015 Simple Simon and Company 5

 #5. Place your skirt and your waistband right sides together and match
up each of the four pins. Since the waistband elastic is smaller than
• Method #1
the skirt pattern, you will have some space between the pins. This
Cover stitch the hem using a serger or coverstitch machine.
space is correct and what the skirt and waistband should look like.
• Method #2
Stitch the hem using a twin needle on your regular sewing machine.
• Method #3
Stitch the hem using a regular needle on your sewing machine.

#6. Take your skirt to the sewing machine or serger and stitch around
the elastic waistband and skirt stretching the elastic slightly to
match the knit skirt (do not stretch the skirt, only the elastic).
Methods 1 & 2 appear the same - as two straight lines of stitching Method 3 can be stitched as a straight stitch or a zig zag
Continue to stitch or serge around the entire maxi skirt.
#7. Turn the waistband right side out. The top of your maxi skirt is
now done. The cover maxi skirt was made with Simple Simon and Company’s
“Four Corners” fabric line created for Riley Blake Designs and is available
at local quilt shops Fall of 2015.

NOTES:

#8. Now it’s time to hem the maxi skirt. Serge or zig zag around the
bottom of the skirt. Turn up the skirt 1/2” and press around the
hem of the skirt, making sure not to stretch out the skirt as you are
pressing. Then hem your skirt using one of three methods

Simple Maxi Skirt | ©2015 Simple Simon and Company 6

 1
4”

4”
Test
Square
XXL

XL

XS

2
 3
Simple Simon Size Guide

Size Waist Hip

XS 26” 35“
S 28” 37”
M 30” 39”
L 32” 42”
XL 34” 44”
XXL 36” 46”
 4
Simple Simon & Co
Simple Maxi Skirt

Cut 2 on fold
5
 6
cut here and follow directions to lengthen or shorten
7
8
Place on Fold
9
10
 11 XS
S
M
L
XL
XXL

© 2015 Simple Simon and C

 12
ompany - All Rights Reserved