Scribd
Upload
68 views11 pages

EE 362: Control Systems

This lecture discusses modeling electrical systems using transfer functions. It introduces modeling circuits using three passive linear components: resistors, capacitors, and inductors. Transfer functions can be obtained for simple circuits using Kirchhoff's voltage law and mesh analysis, writing differential equations for voltage around loops. For more complex circuits with multiple loops, mesh analysis involves writing simultaneous differential equations and solving for the output transfer function.

Uploaded by

Adam Mazoz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views11 pages

EE 362: Control Systems

This lecture discusses modeling electrical systems using transfer functions. It introduces modeling circuits using three passive linear components: resistors, capacitors, and inductors. Transfer functions can be obtained for simple circuits using Kirchhoff's voltage law and mesh analysis, writing differential equations for voltage around loops. For more complex circuits with multiple loops, mesh analysis involves writing simultaneous differential equations and solving for the output transfer function.

Uploaded by

Adam Mazoz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

EE 362: Control Systems

Dr. Osama Abolaeha

Lecture 3: Modeling of Electrical systems


In this lecture, we formally apply the transfer function to the mathematical
modeling of electric circuits including passive networks and operational amplifier
circuits.
Equivalent circuits for the electric networks that we work with first consist of three
passive linear components: resistors, capacitors, and inductors.
Table below summarizes the components and the relationships between voltage
and current and between voltage and charge under zero initial conditions:

Simple Circuit via Mesh analysis:

Transfer functions can be obtained using Kirchhoff’s voltage law and summing
voltages around loops or meshes. We call this method loop or mesh analysis and
demonstrate it in the following example.
The previous example involves a simple, single-loop electrical network. Many
electrical networks consist of multiple loops and nodes, and for these circuits we
must write and solve simultaneous differential equations in order to find the
transfer function, or solve for the output.
Complex Circuits via Mesh Analysis
To solve complex electrical networks—those with multiple loops using mesh
analysis, we can perform the following steps:
1. Replace passive element values with their impedances.
2. Replace all sources and time variables with their Laplace transform.
3. Assume a transform current and a current direction in each mesh.
4. Write Kirchhoff’s voltage law around each mesh.
5. Solve the simultaneous equations for the output.
6. Form the transfer function.
Let us look at an example.
In order to handle multiple-node electrical networks, we can perform the
following steps:

You might also like