0% found this document useful (0 votes)
591 views54 pages

Labs

This document provides an inventory of electronics laboratory equipment for three different labs at Misr University for Science & Technology. It lists 39 items with model numbers, quantities, serial numbers, manufacturers, and countries of origin. The equipment includes oscilloscopes, power supplies, function generators, multimeters, and other basic electronics devices. It also lists components, books, and a PC computer available in the labs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
591 views54 pages

Labs

This document provides an inventory of electronics laboratory equipment for three different labs at Misr University for Science & Technology. It lists 39 items with model numbers, quantities, serial numbers, manufacturers, and countries of origin. The equipment includes oscilloscopes, power supplies, function generators, multimeters, and other basic electronics devices. It also lists components, books, and a PC computer available in the labs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 54

Misr University for Science & Technology ( MUST)

College of Engineering
Instruments of Electronics Lab1
Manufacture : Lab Volt Inc. Made in : Canada
Apparatus
ID Name Model QTY P/N S/N

Lab Volt FACET ( Fault Assisted Circuits for Electronic Training ) Electronics
Training system
E12 Base unit 12 91000-35 A-96406, A-95518
A-96404, A- 95517
A-96403, A- 96408
A-96407, A- 95523
A-96402, A- 95527
A-96405, A- 96409
E13 Digital Multimeter 11 1247-05 B-80662, B-80560
+AF Generator B-80657, B-80649
B-80658, B-80661
B-80108, B-80646
B-80110, B-80660
B-80562
E14 Set of training PCB
devices includes:
1- DC Network 4 AS91002- A-91365,A-92766
Theorems 20 A-91366,A-92768
2-AC1 Fundamentals 4 AS91003- A-92043,A-92047
20 A-92039,A-92040
3-AC2 Fundamentals 4 AS91004- A-91909,A-91921
20 A-91920,A-91918
4-Semiconductor 4 AS91005- A-93757,A-93773
Device 20 A-93770,A-93776
5-Transistor 4 AS91006- A-92486,A-92488
Amplifier Circuit 20 A-92487,A-92509
6-Transistor Power 4 AS91007- A-94426,A-94425
Amplifier 20 A-94401,A-94424

7-Transistor feedback 4 AS91008- A-95028,A-95027


Circuit 20 A-89586,A-84500
8-FET Fundamentals 4 AS910010 A-93412,A-93413
-20 A-93410,A-93411
9-Operational 4 AS910012 A-92684,A-92652
Amplifier -20 A-92685,A-92653
Fundamentals
10-Operational 4 AS910013 A-89613,A-89635
Amplifier -20 A-89636,A-89612
applications
11-Digital Logic 4 AS910014 A-91972,A-92017
Fundamentals -20 A-91996,A-92018
12-Digital Circuit 4 AS910015 A-93115,A-93119
Fundamentals -20 A-93118,A-93120
13-Digital Circuit 4 AS910016 A-88698,A-94705
applications -20 A-94706,A-94697
E15 DC Miliamperes meter 12
Inside two storage box
E16 Over head Projector MEDIUM 2 MEDIUM 38237 , 31800
with Lamp 24 V 250W 2024
E17 20MHz Oscilloscope HUNG 12 6502 6502Q00410 , 405 , 408 ,
HC with (2) BNC CHANG 401 , 399 , 400 , 409 , 403 ,
probe 404 , 411 , 406 , 407
E18 IBM PC computer
includes :

1
1- IBM Monitor 6542-103 1 96G1572 66G5057

2- IBM CPU unit with 1


Floppy Drive , pent
I processor , 1.1 Gb
HD RAM 16 Mb
3- Keyboard & Mouse 1

E19 Accessories :
1- Connector different 45
types for Digital
Multimeter & AF
generator
2- Pin – wire 27
connection
3-Jumper Pin 48
connector
4- Clips with plastic 20
cover
5- Plastic storage Box 12
6- 220Vconnection 1
cable 4 outputs

2
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Advanced Electronics measurements
Apparatus
ID Name Model QTY P/N S/N Manuf. Made in

1 Spectrum analyzer E4405B 1 MY45106602 Agilent


9KHz -13.2GHz Technology Malaysia
2 Universal counter 53132A 1
225MHz MY40007326
3 Multimeter 34401A 1 MY45016453
4 Signal Generator Aero 1
Flex
2023B
5 DC Power supply with HM 7044 2
options : HZ10S ,
15,16, 22,24,31,32
6 Digital TDS301 2
Oscilloscope Analyzer 2B
with options TDS3GV
, WSTRO
7 Digital Multimeter Fluke 4
with option : FVF-SC2 189
Oscilloscope 1 GHz Lecray71
8 with options : XMAP , 00A
ENET CP015 ,
HEP1500 , D300A-
ATwithWL300 , VT75

3
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Basic Electric Circuits Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


Basic Electric & Electronic Circuits Lab includes :
E27 Working bench 10 Hampden USA
Includes:
1- Power supply unit HBT-473-A 10
2- Digital HBT-2833A 10 BK Taiwan
Multimeter PRECISI
3- Function HBT4017 10 ON
Generator
4- Frequency HBT-1803C 10
Counter
E28 Oscilloscope 20MHz BK 6 2120B 286045 , 286011 BK Taiwan
286014 , 284466 PRECISI
284475 , 284488 ON
E29 Box of selectable ID-1 1 70014 Hampden USA
Coils in Henrys
E30 Box of selectable RD3 6 70010 , 70008
resistance in Ohms 70009 , 70011
70013 , 70012
E31 DC Galvanometer 305B 6 70019 , 70018
70015 , 70016
70020 , 70017
E32 Phase sequence PSI-100 1 69753
indicator
E33 Phasing Lamp PSI-100 1 69754
E34 UPS unit 3.2 A APC 1 650(420){28 9733933090 APC Ireland
0}
E35 Instrumentation 10
Amplifier Circuits
E36 First order Active 10
Filters circuits
E37 Timing circuit 10
Driving Circuit
E38 Logic Probe 17MHz LP10A 3 70002188 Wavetek Taiwan
70002148
50001640
E00 Set Of Electric and 239 items each item includes a specific QTY
Electronic
components circuit As per the attached file : E00
board : Resistors ,
Capacitors,
Inductors , ,
Diodes ,
Transistors ,
Integrated Circuits
, Switches , lamps ,
transformers
E39 Set of Books &
references :
1-Basic electronics 4
2- Electronics 5
( principles &
applications )
3- Digital 4

4
Electronics
4- Electricity 8
( principles &
applications )
5- Communication 10
Electronics
6- Microprocessors 6
( principles &
applications )
E40 PC Computer :
1- CPU , Pent 4 , 1.6 1
GHz, HD WDC 40
Gb , CD ROM ,
Floppy , Network
Card , Sound ,
Phones,RAM128
Mb, XP
2- Monitor LG Studioworks 1 CB553H- 212D174743 LG
500G AL
3-Keyboard+ Mouse 1
E41 PC Computer :
1- CPU Unit , Pent NCR 10 3259-2200 49-314878 26 , NCR
I, RAM 16 Mb, HD 32, 15, 17 , 23 ,
1.6 Gb Generic, 10 , 06 , 11 , 19 ,
Floppy, WIN 95 21
2- Monitor NCR 10 HL4850A 15-32033 688 , NCR
696 , 687 , 613 ,
689 , 691 , 615 ,
699 , 694 , 704
3- Keyboard 10
+Mouse
E42 32-bit 1 MCB- 70056 Hampden
Microcomputer 486FT
Trainer

5
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Software Engineering Lab (Programming 1)
Apparatus
ID Name Model QTY P/N S/N Manuf. Made in
Software & Programming lab 1
1 PC computer Includes: 20
1- CPU : Pent II, HD10Gb, 20
64MbRAM , Floppy ,
CDROM , Sound , Network
Card , Phones
2- Monitor Acer 54eL 15 7254e 03001582T5V412 Acer Taiwan
03001951T5V412
03001507T5V412
3- Monitor Acer 1555 5 03001617T5V412
03001822T5V412
03001566T5V412
03001598T5V412
03001849T5V412
03001648T5V412
03001968T5V412
03001510T5V412
02500732T5V414
02500665T5V414
02500623T5V414
02500641T5V414
00800195S5C410
00800371S5C410
00800151S5C410
00800288S5C410
00800456S5C410
4- Key board +Mouse 20

Misr University for Science & Technology ( MUST)


College of Engineering
Instruments of Programming Lab2 Architecture
Apparatus
ID Name Model QTY P/N S/N Manuf. Made in
1 Computer Pent. 4 HD 20 Taiwan
160Gb , processor 3Ghz , CARBON
Monitor acer 17”
2 Computer Pent 4 , HD 80 1
Gb , Processor 2.8GHz ,
monitor SAMSONG 17”
3 Plotter Hp Designjet 1 SG5C234006 Spain
5500 printer
4 Laser Printer 1700n 1 Dell China
5 Laser printer 1320 1 hp china

6
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Design & Development Lab (Programming 3)
Apparatus
ID Name Model QTY P/N S/N Manuf. Made in
1 PC computer Includes: 20
1- CPU : Pent 4 HD80Gb, 20
Floppy , CDROM , Sound ,
Network Card ,
2- Monitor Acer 17 “ 54eL 20 Acer Taiwan

4- Key board +Mouse 20

Misr University for Science & Technology ( MUST)


College of Engineering
Instruments of Auto CAD Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in

Design with the help of Auto Cad Program


E59 PC Computer 24 Everex China
includes: System
Inc.
USA.
1- CPU : Pent III Ebony 24 933I5F 0EI01090010080 ,
,HD40Gb,CD ROM , 10 , 25 , 51 , 95 , 35
127Mb RAM ,Floppy, , 96 , 90 , 03 , 05 ,
Network Card, WIN 85 , 31 , 71 , 87 , 06
ME, 98 , 08 , 45 , 39 , 53 ,
16 , 44 , 60 , 88 , 07
2- Monitor Ebony 24 SA-558G FXIU170087622 ,
505 , 401 , 602 , 620
, 545 , 506 , 621 ,
499 , 461 , 627 , 410
, 515 , 432 , 562 ,
613 , 403 , 421 , 645
, 496 , 594 , 582 ,
609 , 528
E60 Plotter hp, colored Design 1 C7770B SG18J210D7 HP Singapore
Jet 500
E61 Copier XEROX, XERO 1 NB-1 1105107893 XEROX USA
(BL & Wh ) X

7
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Physics 1 Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E81 Stand STM 7 LH
E82 DC/AC Power FBS11.01 1
Supply : USA
(0- 500VDC0.1A) IMPO
, (0-25VDC8A) ,
( 0-25VAC8A)
E83 Low Voltage 52216 2
DC/AC power
Supply :
(0-12VDC,AC-3A) LEYBOLD
E84 Transformer: 56273 3
Germany
(6V-5A) ,
(12V-2.5A)
E85 Digital balance SPO51 1 SCALTEC
device : Instruments
310gm , d=0.01gm
E86 Analog Multimeter METRA 4 531100 LH Slovenia
E87 Digital Multimeter DT-830B 5 CEM
E88 Function Generator 52262 2 LEYBOLD Germany
E89 DC Resistor 2X94E 2 251602 , H.TINSLEY England
251606 &Co. LTD
E90 Incandescent Light OS-9102B 2 PASCO Denmark
Source Scientific
E91 RHEOSTAT IRWIN 1
520Ω,1A
E92 Vertical balance 31507 7 Klinger USA
500gm
E93 Steam generator TD-8556A 1 PASCO Denmark
E94 Connection Board 1
E95 Plastic Polly , 15
radius 5Cm
E96 Plastic Polly , 14
radius 2.5Cm
E97 Thermal expansion 2
rod (iron)
E98 Thermal expansion 2
rod (Alum.)
E99 Thermal expansion 2
rod (Copper )
E100 Conductivity meter 71150 1 97032553 ICM USA
µ MHOS/CM
E101 Sound phone 2
E102 Metal weights 21
E103 Lenses holder 2
E104 Thermal radiation TD-8554A 2 PASCO Denmark
Cube
E105 Set of electronic
components

8
includes:
1-Resistor 100KΩ 1
0.25W
2-Resistor 220Ω 3
0.25W
3-Resistor 100Ω2W 1
4-Capacitor 3
35V1000µF
5-Jumper 1
6-Capacitor 3
40V100µF
E106 PH meter 420A 2 016071 , ORION USA
016059
E107 PH meter Φ320 1 PHI320 30093 BECKMAN USA

9
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Physics 2 Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E108 Stand STM 10 LH USA
E109 High voltage Power SF- 1 365550-3 UP0882 Demark
Supply : 9585A
(0- 500VDC), PASCO
(0-50DC) , ( 2 -
7VAC3A)
E110 Low Voltage DC/AC 52216 2
power Supply :
(0-12VDC,AC-3A)
E111 Low voltage DC/AC SF- 2 362001-3 UR2510 ,
power supply: 9584 UR2536
LEYBOLD Germany
(0-24VDC8A),
(0-24VAC6A)
E112 Transformer: 56273 3
(6V-5A) ,
(12V-2.5A)
E113 Precision Digital balance SUNG- 1 2100 150 JADEVER TAIWAN
device : 150
150gm , d=0.005gm
E114 Precision Interferometer OS- Demark
PASCO
9255A
E115 Analog Multimeter METR 2 531100 LH Slovenia
A
E116 Digital Multimeter DT- 2 CEM
830B
E117 Function Generator 52262 2 LEYBOLD Germany
E118 RHEOSTAT 26Ω,5A IRWIN 1
E119 RHEOSTAT 48Ω, 3.3A IRWIN 1
E120 Steam generator TD- 2 PASCO Denmark
8556A
E121 Connection Board 2
E122 Sound phone 2
E123 Metal weights 31
E124 Lens Holder 1
E125 Flame base 3
E126 Vertical balance 500gm 31507 3 Klinger USA
E127 Glass gar 500ml 4
E128 Thermal expansion TD- 1 PASCO Denmark
8558A
E129 Laser radiator 155SL- 1 1228868 UNIPHASE USA
(0.95mw) 1741
E130 Thermal conductivity TD- 3 PAS Denmark
apparatus ( with 4 plates 8561 CO
accessories)
E131 Thermal Radiation TD- 3
Sensor 8553
E132 Dynamometer 23
E133 Mechanical equivalent of TD- 3 PASCO TAIWAN
heat apparatus( with 8551A
drum & container)
E134 Stop watch ( Analog) 4

10
E135 Stop watch ( digital) 5
E136 Multimeter DY1 1 H.Tinsley China
E137 Photometer OS 2 03/97-09100076 PASCO USA
8020
E138 e/m experimental TG-13 1 UCHIDA Japan
apparatus YOKO
E139 Voltage 1 522 32 LH Germany
Stabilizer(12VAC , 1.5-
12VDC0.5A)
E140 Vibrating Fork 13
E141 Spring 9
E142 PC Computer 386 1
E143 Optical Divided support 1
tool
E144 Two Bans Sensitive 2
balance inside glass box
E145 0.5- 200 gm weights for 1
the balance( 20 pieces)
E146 Set of electronic
components includes:
1-Resistor 100Ω 2W 1
2-Resistor 100KΩ 2
0.25W
3-Varaiable resistor 1
220Ω3W
4-Capacitor 35V1000µF 3
5-Switch 1/4 W 3
6-Coil 1
7-Jumper 9
E147 Bag includes the 2
following optical tools :
1-pressure meter with 1
pump
2-Component holder 3
3-vacuum cell 1
4-Compensator 1
5-beam splitter 1
6-movable mirror 1
7-Glass plate 1
8-difusure 1
9-Convex lens 3
10-Rotational pointer 1
11-Adjustable Mirror 1
E148 Bag includes the 2
following optical
elements :
1-Convex lens 3
2-surface mirror 2
3-Cocave lens 1
4-Variable Diaphragm 1
5-Supporting piece 1
6-prism 1
7-Acrylic plate 1
8-Glass plate 1
9-Polarizer 3
10-Retarder 1
Optical objects , 20
permittivity plates

11
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Physics 3 Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E149 Analog Multimeter METRA 9 531100 LH Slovenia
E150 Digital Multimeter DT-830B 1 CEM
E151 Function Generator 52262 2 LEYBOLD Germany
E152 Digital balance device : SPO51 1 SCALTEC
310gm , d=0.01gm Instruments
E153 Stand STM 6 LH USA
E154 Steam generator TD-8556A 2 PASCO Denmark
E155 DC/AC Power Supply : FBS11.01 1
(0- 500VDC0.1A) ,
IMPO
(0-25VDC8A) , ( 0-
25VAC8A)
E156 Low Voltage DC/AC 52216 1 LEYBOLD
power Supply :
(0-12VDC,AC-3A)
Germany
E157 Transformer: 56273 1
(6V-5A) ,
(12V-2.5A)
E158 Thermal radiation TD-8554A 1 PASCO Denmark
Cube
E159 Connection Board 1
E160 Lens Holder 1
E161 Convex lens 17
E162 Concave mirror 1
E163 Optical object 2
E164 Dynamometer 7
E165 Metal weight 28
E166 Spring 6
E167 Sound phone 1
E168 Plastic Varner caliper 14 Germany
E169 Stainless Varner 2
caliper ( 0-150mm)
E170 Plastic Polly , radius 17
5Cm
E171 Plastic Polly , radius 18
2.5Cm
E172 Rubber tape package 13
E173 Low voltage DC/AC SF-9584 2 362001-3 UR2540 ,
power supply: UR2537
(0-24VDC8A),
(0-24VAC6A)
PASCO
E174 AC/DC power supply SF-9582 3 36100-1 UA1238 Denmark
Scientific
(1-12VDC6A) UA1410
(1-12VAC6A) UA1240

12
E175 Variable Extra Low voltage 521 35 S 4 52135 LEYBOLD Germany
Transformer:
(12VAC , 20VAC , 20VDC )
E176 Voltmeter 12.44 2 IMCO
E177 Ammeter 12.43 2
E178 Millimeter E17S 2 0680634 ,
0680643
E179 Voltmeter E17S 1 0180376
E180 Ammeter
E181 Steven-Boltzman lamp: TD- 1 PASCO
Denmark
13VDC Max. 8555 Scientific
E182 V/A meter : 4 KEP USA
0.15 V, 0.15 mA
E183 Small connection board 4
E184 Voltage Stabilizer(12VAC , 1 522 32 LH Germany
1.5-12VDC0.5A)
E185 Alu. Small supporting piece 16
E186 Wired heat sensor 8
E187 Ear Phone single 3
E188 Angular Translator OS- 2
PASCO Denmark
9106A
E189 Lamb base for lens holder 3
E190 Set of optical permittivity 2
plates sets
E191 Double lens 2
E191 Variable optical slot 2
E192 Angular Scale 4

E193 Box of Micro glass slides 2


includes 50 slides boxes
E194 Glass slides 10x10Cm 3
E195 Small model for earth 2
E196 Set of different metal plates 4
and supporting tools for heat sets
experiments
E197 Set magnetic experimental 4
tools sets
E198 Set of optical lenses and 1
screening plates
E199 Lighting lamp with optical 1 459091
holder
E200 Electrical equivalent of heat 1
lamp
( 13VDC)
E201 Vertical balance 500gm 31507 1 Klinger USA
E202 Supporting tools 8
E203 Weights different shapes 25
E204 Box of different cupper 16
weights (1-50gm) for boxes
sensitive balance
E205 Poly paster 5 47660
E206 Set of plastic pipes 1 set
E207 Set of plastic lifting arms for 2
experimental purposes sets
E208 Set of glass containers 2 sets

13
E209 Metal rods 19
E210 Set of metal lifting 1 set
plates
E211 Triple beam balance 6 2.729.439 OHAUS
500gm
E212 Optical dividing 1
supporting tool
E213 Lapogax stove 206 3 Gaz France
E214 Box of lambs 12VDC 6 boxes
3W(10Lambs)
E215 Box of lambs 4VDC 12
0.04A(10Lambs) boxes
E216 Thermal paper role 8
roles
E217 Alkaline battery D-size 28
1.5V
E218 Set of glass Plates 1
E219 Thin steel wire role 4 roles
E220 Stainless steel Slicer 14
E221 Lighting Glue box 10
boxes
E222 Set of Electronic
components for
experimental use
includes:
1-Coil 7
2-1.5 D-size battery 10
holder
3-Jumper 56
4- Toggle Switch 5
5-Resistor 35
6-Lamb 16
7-Capacitor 9
8- Switch 5
9-Motor 3V DC 14
10-Variable resistor 8
11-Diode 1N4007 10
12-LED 8
13-Zenor Z PD 6,2 4
14-Transistor BD137 8
15-Relay 16V,150 ohm 4
16-Potentiometere 220 3
ohm 3W
E223 Student manuals for 22
experiments (original)

14
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Mechatronics Lab1
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


1 Instrumentations H-ICS-8189 1 70416 Hampden
and controls Trainer
includes:
- Single station 762CNA 2
micro
controller
- Strip Chart 762RNA 1 98F05039 3A1-
Recorder A0
-Flow Transmitter IDP10- 1
I20B11F- FOXBORO
M1U USA
- Pressure IGP10- 1
Transmitter I2001F-
M1U1
- Level Transmitter IDP10- 1
I20B11F-
M1U
- I/P Converter 646 1 14178470 Fisher
- Control Valve 1 32-24-588 1 9802-130-1 Controls
- Orifice– High 1
/Low
- HV-1 Valve 1 97H00095F ASAHI Japan
-HV-2 Valve 1 97H00084F
- 3 way time delay 1 Fisher USA
Controls
Valve
- Air compressor 1
inside Cabinet
- Reservoir Tank 1
with Pump (
Drain
& Fill )
- Process Tank 1
2 Displacement Photon Photon Egypt
Transducers 1
3 Force Transducers 1 Photon Photon Egypt
4 1 Photon Photon Egypt
Pressure
Transducers
5 Temperature Photon Photon Egypt
Transducers 1
6 Light analyzer 1 Photon Photon Egypt
7 Mechanical 1 Photon Photon Egypt
Transmission Gears

15
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Mechatronics Lab2
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


1 Input/Output 8 ELWE Germany
Simulator for PLC
includes:
1- Connection panel Auto Lab 8
2- CPU-222 S7 200 6 212-1BB21-
OXBO
3- CPU-224 S7 200 2 214-1BD21-
OX8O
4- EM-235 Analog AI4/AO1X1 5 235-OKD22-
PLC 2Bit OXAO
5- EM-277 3 227-OAA22-
PROFIBUS-DP OXAO
6- Power Supply Siemens 8 6EP1332-
Unit PS200 1SH31
( 220AC-24DC)
7- Dc Motor 8
(24VDC)
8- PPI Cable 7
9- Cable 1
PROFIBUS
2 Software for PLC
includes:
1- I/O Server ( 2 CD
Wonderware2000)
2- FACTORYSUIT 1 CD
2000(Wonderware2
000)
3- SIMATIC 2 CD
Software
4- INTOUCH 7.1 QTY (2) Set 2
Process inside box
Visualization each set
(Wonder ware ) includes (3)
6-Wonderwares CD
Greatest Hits
7- Factory Suit
2000, Version 7.1
Introduction
8- Software License wonder ware 2 02-3H2 193216
Key + Floppy Disc 193207
3 PC Computers 6
includes:
1- CPU : Pent III Ebony 5 933I5F 0EI0109001006 Everex China
,HD40Gb,CD ROM 8, 58 , 69 , 79 , System Inc.
, 129Mb RAM 23 USA.
,Floppy, Network
Card, WIN ME,
2000, Sound ,
Phones
2-Monitor Ebony 4 SA 558G FXIU17008749
0 , 569 , 541 ,
447
3- Monitor Acer V551 1 7254e 03400711T5341 Acer China
4
4- Monitor view 1 10W004409768 View Sonic Thailand
16
Sonic
5- Keyboard 6
+Mouse
4 Pneumatic Training 1 Egypt
system
Microprocessor 8080 10
5 Kits Intel
M06-
0103MP

17
 
        

!!" #$ 



8
(  
)  PLC  8

PLC  6
 PLC  10
 !
 1
( .) " #$ %&' () * +, ,-
 1
+,$ (1 #$ 23,$ $4$ %&3,$ * +, / 0
5
56$ 7 4$ 8 9:;, < 5
( =,$ >?) !  7
1
Camera Ablaster IEEE 1394 < + $ 1
!!
%  !!$
Motor Starter 6
Automatic Contactor 42
Mechanical Inter Lock 18
Electronic Timer 18
Timer Delay 18
Phase Sequence and Phase Start Push Button 18
Stop Push Button 6
Selective Switch 6

18
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Bio medical engineering Lab
Apparatus
Made
ID Name Model QTY P/N S/N Manuf.
in
E224 Monitor video EB-B3/EV 1 02.01.00145 Elettro
E225 Biomedical Signal EB-B1/EV 1 02.01.00144 nicaVe
amplifier neta
E226 Biomedical signals EB-B2/EV 1 02.01.00142
Graphic Recorder
E227 Biomedical EB-B4/EV 1 02.01.00143
Physiological
Stimulators
E228 Biomedical Transducers EB-B5/EV 1 02.01.00147
E229 Biomedical EB-B6/EV 1 02.01.00146
Optoelectronic Devices
and fiber optics
E230 Power Supply unit PS1- 6 02.01.01424
( 1.3-24VDC1A , PSU/EV 02.01.01425 Italy
30VDC4A,24VDC4A, 02.01.01426
5VDC2A ,12VDC1A , 02.01.01427
12VDC2A ) 02.01.01428
02.01.01429
E231 Data Acquisition UCVB/EV 6 02.01.03995 , 02.01.03996
&Control Unit 02.01.03997, 02.01.03999
02.01.04000, 02.01,04003
E232 Biomedical Signal GSB/EV 6 02.01.03998 , 02.01.04001
Generator 02.01.04002, 02.01.04004
02.01.04005, 02.01,04006

E233 Faults Unit with two SIS3/EV 6 02.01.00937 , 02.01.00938


Data cables 02.01.00939, 02.01.00940
02.01.00941, 02.01,00942
E234 40MHz Oscilloscope HC HUNG 1 6304 6502Q02423 HUNG China
with (2) BNC probe CHANG CHAN
G
E235 Digital Multimeter & AF Lab-Volt 1 1247-05 B-80656 Lab- Canada
generator Volt
E236 Accessories includes:
1-Spirometer EB-B5/EV 1
2-Low Frequency EB-B4/EV 1
magneto Therapy
3-Electrical Stimulation EB-B4/EV 1
4-Ultra Sound Therapy EB-B4/EV 1
5-Mirrophone EB-B5/EV
6-Artery Air Bag 1
7-data cable 9-wire 20cm 7
8-data cable 26-wire 7
200cm
9-data cable 37-wire 1
10cm
10-Fiber Optic cable 7
200cm
11-Bag of connection 10
fine cable 1-wire bags
includes 2 cables
12-DIFF. Probe DPMCO1 1
13-Cable 8-Wire with 3 1

19
Silver/Silver Chloride
electrode
14-Manuals for 39
Biomedical Instruments
E237 Software ( original) for
Biomedical
engineering Training
includes :
1- CD , SWBB-B1 1
CD
2- CD , SWBB-B2 1
CD
3- CD , SWBB-B3 1
CD
4- CD , SWBB-B4 1
CD
5- CD , SWBB-B5 1
CD
6- CD , SWBB-B6 1
CD
E238 Computer Aided SWBB- 6
Instruction manual for B…../EV
IPES ( interactive
practical Electro
biomedical System)
E239 PC Computers includes: 11
1- CPU : Pent III, ME , Ebony 4 93315F 0EI01090010029 , 49 , 01 Everex China
HD40Gb, 64 or 127 , 50
MbRAM , Floppy ,
CDROM , Sound ,
Network Card ,
Phones
2- CPU : Pent III, ME , View Star 7
HD20,5 ,10Gb, 64 or 127 Chost
MbRAM , Floppy ,
CDROM , Sound ,
Network Card ,
Phones
3-Monitor Ebony 10 FXIU170087550 , 575 , Everex China
628 , 413 , 520 , 493 , 576
, 585 , 423 , 426
4-Monitor E50 1 VCDTS2 10W004806680 View Thailan
1915-2E Sonic d
5-key board + Mouse 11

20
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of
Radar Training Lab & Antenna Training lab & Microwave Training Lab
Apparatus
ID Name Model QTY P/N S/N Manuf. Made in
E8 Radar Training System ( Canada P/N 824 569-1271 818- LAB-VOLT Canada
1332 846) include the following: (Quebec)
LTD
E8.1 Digital MTD/PPI LAB - 1 9624-00 A-92650
Processor VOLT
E8.2 Dual –channel 1 9605-00 A-92541
sampler
E8.3 Analog MTI 1 9622-00 A-78891
Processor
E8.4 Radar Receiver 1 9621-00 A-92570
E8.5 Power supply and 1 9601-15 B-80497
Antenna motor
Driver
E8.6 Radar synchronizer 1 9602-00 A-89052
/Antenna controller
E8.7 Radar Transmitter 1 9620-00 A-96241
E8.8 PPI Scan 1 9623-00 A-78892
Converter
E8.9 Clutter generator 1 9606-00 A-92557
E8.10 Radar Antenna 1 9604
system include the
following :
1-Parabolic 1 9604-00
reflector
2- Rotating 1 9603 A-91756
antenna Pedestal
3- Pyramidal Horn 1
Antenna
4- Microwave 1 A-79604
absorbing Parapet
E8.11 Target positioning 1 9607-1
system include the
following :
1- Target table 1 9607-15
2- Target controller 1 80111
3- AC/DC
Converters
protection (Y-
axis & X-axis )
4- Mast 2
5- Passive targets 8
different shapes
E8.12 Bag include the 1 C-27033
E8.13 following items :
E8.14 1- BNC–T 6 26851
E8.15 connector
2- Medium BNC- 6 26854
connector coaxial
cable(75cm)
3-- Long BNC- 8 26854-1
connector coaxial
cable(120cm)

21
4-- Short BNC- 10 26854-2
connector coaxial
cable(40cm)
5- SMA – 1 28605-1
connector 50 Ω
load
6- Waveguide-to- 1 28631-1
SMA coaxial
adapter
7-Short 15-wire D- 1 28683-1
connector cable
(40cm)
8-U-shap SMA – 1 28696-30
connector Semi-
rigid coaxial
cable
9- Level 1 28831
10- SMA- 1 28833-1
connector
10-dB Attenuator
11- SMA- 1 28834-1
connector
6-dB Attenuator
12- SMA- 1 28835-1
connector
3-dB Attenuator
13- Pyramidal 1 9535-00 D26391
Horn Antenna
14- Power Supply 1
cable
15- long 9-wire D- 1
connector cable
(200cm)
16- Long 8-wire 1
cable (200cm)
17- Long 9-wire 1
cable (200cm)
18- Medium 15- 1
wire cable
(75cm)
19- Extra –Long 1
SMA –connector
coaxial cable
(400 cm )
20- Short SMA – 3
connector coaxial
cable ( 40 cm )
21- Long SMA – 2
connector coaxial
cable ( 200 cm )
22- Medium 2
SMA–
connector coaxial
cable ( 75 cm )
Oscilloscope 40 HUNG 1 6504 6502Q0242 HUNG China
MHz with (2) CHANG 8 CHANG
probe type HC-
0P20500V PP
Digital color DAYTE 1 DT-57A A-95515 DAYTEK Korea
Monitor 15 " K
Keyboard & 1
mouse

22
E9 Antenna Training lab include the following : LAB-VOLT Canada
E9.1 Data Acquisition LAB - 3 9507-15 B-77914 (Quebec)
interface unit with VOLT B-78626 LTD
power supply unit B-78627
& power supply
cable
E9.2 Antenna Positioner 3 9506-00 B-79842
unit with antenna B-79844
holding mast B-79841

E9.3 RF Generator 3 9505-05 B-78096


B-78098
B-78097
E9.4 Multi-beam array 3 9556-00 A-95832
Antenna with 8 A-95834
RF ports 50 Ώ A-95833
E9.5 Antenna 3 9595-00 A-88323
supporting base A-88329
with mast A-88326
E9.6 Storage Holder 3 9594-10 C-27135
includes the C-27141
following cables & C-27139
accessories:
1- Data cable 25 3
wire 15 ft. with
plugs
2- SMA– 3
connector coaxial
cable ( different
lengths )
3- Supporting 1
piece
No. 31085
4- BNC-connector 1
Coaxial cable
5- Cable 15-wire 1
6- Cable D- 1
connection
6-wire
7- SMA-connector 1
coaxial cable (1 to
2 terminal )
8- Replacement 1
antenna holding
mast.
9-Power 9
connection
4 outputs cable
E10.7 Metal holder 1 A-88924
includes the
following antennas
and accessories :
1- Yagi antenna 5 1 9560
elements
2- Supporting 1 30916-1
element
3- Supporting 1 30916(2)
element
4- Supporting 1 30916-2(2)
element

23
5- Supporting 1 31037
element
6- hexagonal plate 1 31032 A-88924
7-Pyramidal Horn 2 9550 D-26362
Antenna D-26021
8-Pyramidal Horn 1 9535-A0 D-26409
Antenna
9- Open ended 1 9555 D-26357
waveguide
10-Waveguide 1 9554 D-26073
connector
11- Wrist strap 1 31449
anti- static Bystat
12- Waveguide-to- 2 28631-2
SMA adapter
13- Cover for 1 28024
waveguide
14-Electrical Tape 1 31062
3M

15-Helical 1 9552 D-26085


Antenna with
SMA connector
16- Helical 2 9551 D-25227
Antenna with D-25235
SMA connector
17- SMA-to- 1 31045
unipole connector

18- SMA-to-dipole 1 31050-1


connector
19- SMA-to-dipole 1 31050-2
connector
20- SMA-to-dipole 1 31050
connector
21-Supporting 1 31120
piece
22-Supporting 2 31057(2)
piece
23-Supporting 1 31046-3
piece
24-Microstrip 1 31111-2
antenna
25-Microstrip 1 31111-1
antenna
26-Microstrip 1 31111
antenna
27- Dielectric strip 1 31059
28- Supporting 8 28132(8)
tool
29-Circular dipole 1 31043
30-Rectangular 1 31043-01
dipole
31- Rectangular 1 31043-02
dipole
32-dipole 1 31043-03

33-Unipoles wire 16 31039


antenna different
sizes & shapes

24
E10.8 IBM PC computer IBM United
includes : Kingdom
limited
1- IBM Monitor 6542-103 2 96G1572 55DB222, Greenock,
55BP301 Scotland,
UK
2- IBM CPU unit 6587- 2 23FAW32,
7AT 23FAX31
3- Keyboard & 2
Mouse
E10.9 Monitor MAG Z40001 2 HD721 MAG China
9002583 Technology
CPU 2 Co. LTD
Keyboard &Mouse 1
E11 Microwave Training system LAB-VOLT Canada
E11.1 Power meter 3 9503-00 A-90785 (Quebec)
A-90788 LTD
A-90794
E11.2 SWR Meter 3 9502-00 A-88315
A-90995
A-91004
E11.3 GUNN Oscillator 3 9501-05 B-78820
Power Supply B-80667
B-78818
E11.4 Accessories
includes :
1- Fixed attenuator 1 9533-00 D-26647
6 dB
2- Fixed attenuator 1 9534-00 D-26697
30 dB
3- Horn Antenna 2 9535 D-26394
D-26389
4- GUNN 1 9510 D-26438
oscillator
5- Slotted Line 1 9520-00 D25704
6- Thermistor 1 9521 D-25627
mount
7- Directional 1 9523-00 D-25935
Coupler
8- Crystal detector 1 9522-00 D-25846
9-Side-screw tuner 1 9530-00 25748
10-Matched load 2 9531-00 25817
25816
11-Variable 1 9532-00 D-26628
attenuator
12- antenna 1 9592-00 D-26273
Azimuth indicator
13- Amplifier 1 9593-00 D-25959
14- waveguide 2 9591-00 D-26982
support D-26297
15-fixed short 1 28024
circuit
16- BNC-T 1 26851
connector
17-Rod long MW 3 2801-1
Assy
18- Rod support 2 28016
MW Assy.
19- Coaxial cable 1 26854
BNC/BNC(75cm)

25
20- Coaxial cable 1 28016-1
BNC/BNC
(120cm)
21-Capacitive Lris
lenses (3types)
- Half circle 1 28027
-Short triangle 1 28028
- long triangle 1 28029
22- Quick 16 28132
fasteners
23-metal plate 2 28200
24- Storage tray 1 9599 A-91827

26
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of communications Lab
Manufacture : Lab Volt Inc. Made in : Canada
Apparatus
ID Name Model QTY P/N S/N

Lab Volt FACET ( Fault Assisted Circuits for Electronic Training )


Communications Training system
E20 Base unit 12 91000-35 A-95524, A-95525
A-95526, A- 95521
A-96401, A- 95520
A-95528, A- 95519
A-95516, A- 95530
A-95522 A- 95529
E21 Digital Multimeter 12 1247-05 B-80565, B-80566
+AF Generator B-80663, B-80653
B-80564, B-80659
B-80109, B-80647
B-80655, B-80650
B-80651, B-80563
E22 Set of training PCB
devices includes:
1- Analog 4 AS91018- A-94750,A-92201
communication 20 A-94749A-94748
2- Digital 4 AS91022- A-92732,A-92733
communications 1 20 A-91494,A-92731
3- Digital 4 AS91023- A-88357,A-88348
communications 2 20 A-88358,A-88356

4- Fiber Optics with 4 AS91025- A-92914,A-92904


Set of fiber optics kits: 20 A-92905,A-92915
- 4 connections cables
- 6 inch ruler
- lens +cutter +paper
inside box
5-Digital Signal 4 AS91027- A-88167,A-88168
Processor with : 20 A-88166,A-88162
- cable MF99M10
-Microphone M10
- Head phone
NOVA408
E23 DC Miliamperes meter 12
Inside two storage box
E24 40MHz Oscilloscope HUNG 11 6304 6502Q02420 , 30 , 29, 22 , 26 ,
HC with (2) BNC CHANG 27 , 25 , 24 , 18 , 19 , 21
probe
E25 PC computer includes: 5
1- Monitor MAG D410 2 Z40001 HD7219002518
HD7219002349
2-Monitor AT & T AT&T 3 7134T 49-31973774
49-31807389
49-31795685
3- CPU unit , Pent. I , NCR 4 32659-220 49-31487833
HD 1.5 Gb , Floppy ,
RAM 32Mb , WIN 49-31487814
95 49-31487813
49-31487620
4-CPU Unit , Pent. II , 1

27
HD 6 Gb , Floppy,
RAM 32 Mb , WIN
98
5- Keyboard & Mouse 5
E26 Accessories :
1- Connector different 48
types for Digital
Multimeter & AF
generator
2- Pin – wire 48
connection
3-Jumper Pin 48
connector
4- Plastic storage Box 12
5- 220Vconnection 13
cable 4 outputs

28
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Power Electronics Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


Power Electronic & Electric lab.
E43 Working bench Includes: 1 Hampden USA
1- Power supply unit HBT-473-A 1
2- Digital Multimeter HBT-2833A 1
3- Function Generator HBT4017 1
4- Frequency Counter HBT-1803C 1
5-Connection panel board 1
E44 Four-Quadrant DC speed H-SCR-140 1
Controller
E45 Dissectible Motors includes H-MGB- 1
(4) motors 100-DC
E46 Rectifier and SCR Circuit H-R-SCR-2 1 70284
Trainer
E47 Three Phase transmission H-TLS-100 2 70052 , 70051
line Simulator
E48 Watt / VAR Meter H-W/V-100 2 70055 , 70054
E49 Phase Angle Meter H-PAM-100 1 70053
E50 Transformer trainer H-TTD-1 70057
demonstrator
E51 Linear Positioning trainer H-IEC-XY 1 70060
with (2) DC servo motor
Sets
E52 Remote Control switching H-RCSD-1 1 68057
Trainer
E53 PC Computer with special Gateway
connection to Remote
Control switching Trainer
includes:
1- CPU , Gateway , Pent I P5-75 1
75 MHz , HD 2.1Gb ,
16Mb RAM , Floppy , CD-
ROM , WIN 95
2- Monitor Gateway 2000 VIVITRON 1
3- Keyboard + Mouse 1
E54 Digital Multimeter 77III 10 79740102 , FLUKE USA
79740105
79770077,
79740103
79740101 ,
79770079
79770078 ,
79740104
79770067 ,
79770080
E55 Insulation-Continuity tester KMP2150E 1 3358245 ROBIN England
E56 Motors 2 5 – HP – 3 Phase
22- HP – 3 Phase

E57 Accessories:
Microprocessor Boards &
Chips & Kits for Students

29
Training Includes:
1- µ- Kit –DRM 1
dual RS232
module
2- µ- Kit CPU 1
Board
3- µ- Kit –EPM 1
EPROM PROG.
Module
4- Intel Chip IC DX20DP66 1 SZ933 , V4.8 Intel USA
Processor L5288713
5- Intel Chip IC DX20DPR5 1 SZ934 , V4.0 Intel USA
Processor 0
C5260879
6- IC D8755A 1 L1282165
7- IC D8279C-5 1
8- IC P8085AH (µP) 1 L6110353
9- IC P8155H 1 K831506
10- IC SN 1
74LS145N
11- IC SN 1
75468N
12- IC 1
THS2532JL-30
13- IC 1
DM74LS373N
14- IC 1
SN74S133AN
15- IC TL497ACA 1
16- IC 74LS245 1
17-IC 1
HD74LS74AP
18- IC 77AFH 1
19- IC 74S138AN 1
20- IC CTS8311
21- Transistors 6
22- Capacitors 20
23- Resistors 10
24- Inductors 1
25- Socket IC 16 5
pin
26- Socket IC 14 2
pin
27- Socket IC 20 2
pin
28- Socket IC 40 4
pin
29- 7-segment 6
Display
30- Connection 3
Socket 50 Pin
31- Connector 2 1081-12
32- connector 1 224-
3344
33- Reset switch 1
34- LED red 1
35- Key board 1 87BB3-
201
36- Set of 4
connection wires
& Magnetic
Compass

30
37- Set of different 1
connection wires set
inside cartons
38- Set Of Electric and Electronic components circuit board includes :
Resistor 33 Ω 1 213
Resistor 47 Ω 1 214
Resistor 220 Ω 1 220
Resistor 270 Ω 2 221
Resistor 560 Ω 1 225
Resistor 680 Ω 2 226
Resistor 1 KΩ 1 228
Resistor 1.2 KΩ 1 229
Resistor 3.3 KΩ 1 235
Resistor 12 KΩ 1 242
Resistor 18 KΩ 1 244
Resistor 22 KΩ 2 245
Resistor 27 KΩ 1 246
Resistor 33 KΩ 1 247
Resistor 47 KΩ 1 249
Resistor 68 KΩ 1 251
Resistor 100 KΩ 1 253
Resistor 150 KΩ 1 255
Resistor 270 KΩ 1 257
Resistor 470 KΩ 1 260
Resistor 25 Ω 1 285
Potentiometer 100 Ω 1 411
Potentiometer 500 Ω 1 413
Potentiometer 1 KΩ 1 415
Potentiometer 5 KΩ 1 417
Potentiometer 10 KΩ 1 418
Potentiometer 100 KΩ 2 421
Diode IN 4005 1 535
Transistor PNP 2N3906 1 572
FET 2N 3823 1 598
RF Choke 2.5mh , 43LH222 1 651
SPST Switch 1 729
Motor 1 748
Capacitor 250 pF 1 913
Capacitor 1000 pF 1 914
Capacitor 0.01 µF 1 919
Capacitor 1 µF 1 925
Capacitor 1 µF 1 926
Capacitor 10 µF 1 929
Capacitor 150 pF 1 943
Capacitor 0.47µF 1 944
Capacitor 500 µF 1 974
Capacitor 0.02 µF 1 990
Transistor NPN 2N4401 1 5110
IC Selector multiplier PC Board 1 7118
IC Decoder Demultiplexer PC Board 1 7119
IC Universal Shift Register PC Board 2 7121

31
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of Soil Mechanics & Foundations Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E278 Direct Shear apparatus, T665/010 1 Tecnotest
variable speed from
0.00001 to 3 mm/min.with
Electronic control consol
and stepper motor Max.
Force : 6kN Includes :
1-GEOTRONIC digital AD002 3 200018/12735 ,
display unit , 200027/14043,
microprocessor base 200028/1405e
2- Displacement Transducer AD100/011 1
10mm travel
3- Displacement Transducer AD100/026 1
25mm travel
Italy
4- Tension /compression AP032/005 1
Load cell 5kN capacity
5- Shear Box , 6X6Cm , T666 1
made of Brass
6- Shear cutter 6X6Cm T666/1 1
INOX
7- Multiplexer for AD021/010 1
connecting the various
Geotronic units in a
network .
8- Two-way connector AD021/002 1
block.

9- Set of network cables 1


complete with set
connectors

10- Calibrated weights for T660/6 1


specimens measuring set
60X60mm , 70X70mm
and 2.5 " diameter
( 0.5 , 1 , 2 , 4 , 8 , 16
Kgm )
E279 Mobile fulcrum T663/010 1
Oedometer
Includes:
1- Displacement Transducer AD100/011 1
10mm travel
2-GEOTRONIC digital AD002 1 200028/14041
display unit ,
microprocessor base
3- Consolidation cell 20 T661 1
sq.cm sect. 50.47 mm
dia. Specimen(Brass)
4- Set of Calibrated weights T661/10 1
(64kgm) for set
Consolidation cell T661
E280 Triaxial load frame 50kN , TR115 1 97007
speed 0.00001 to 7
mm/min (without ring) ,
220VAC , 50Hz, 450W

32
Includes:
1-GEOTRONIC digital AD002 4 200025 , 200026
display unit , , 200023 ,
microprocessor base 200024
2- Constant pressure sources TR305 2 98014 , 98022
: Bladder Air-Water
Cylinder
( 10 " bar) with valve
and connector
3- Monometer Group 0-10 TR305/010 1
bar with support column
base and valves for
TR305
4- Volume change device TR440/D 1 98012
with displacement
transducer AD100/026
5- Compression Load cell AP032/050 1 34357
50kN capacity
6- Displacement Transducer AD100/026 1
25mm travel
7- Triaxial cell for samples TR205 1 98008
up to 2 " dia.
8- base for 38.1mm TR205/001 1
specimens
9- Top cap with draining for TR205/002 1
specimens of 38.1 mm
10- Base plate , Perspex for TR205/003 1
specimens of 38.1 mm
11- Two parts split mould TR205/004 1
for specimens of 38.1
mm
12- Three parts split mould TR205/005 1
for specimens of 38.1
mm
13- Suction Sleeve Stretcher TR205/006 1
for specimens of 38.1
mm
14- Membrane , rubber latex TR205/007 1
for specimens of 38.1
mm
15-Porous Disc for TR205/009 2
specimens of 38.1 mm
16- filter Drain for TR205/010 1
specimens of 38.1 mm
17- O-ring Neoprene for TR205/018 1
specimens of 35- 38.1
mm
18- Pore pressure transducer TR205/500 1 00120224 ,
1000 KPa Capacity 00030572
19- DE-Airing Block for TR205/510 1
pressure Transducer
20- Four-way connector AD021/004 1
block.
21- Bracket for dial gauge T630 1
or Transducer
22- Dial gauge Holder for T630/3 1
Unconfined test
23- Compression Plate for T630/5 1
Unconfined test , 100
mm Dia.( chromium –
Plated)

33
24- Sample preparation ( N205 1
sampler) for 38.1 mm
samples ( piston and
tube included)
25- Silent Air Compressor : D816 1 SV43- 1086 SILENZI Italy
(63 dB) 340 Liters/Min. 85 HP3 ATO
, 12 bar with 3 liters
tank
26- Secondary tank 50 lt. - D816/1 1
16 bar for D816
27- Air Dehumidifier ( 370 D816/2 1
lit./Min.) with
refrigeration cycle for
D816
28- Air Filter for D816 D816/3 1
E281 Liquid limit device T624 2
complete with Blow
counter . Ebonite base
E282 Grooving tool( ASTM) T624/D 3
E283 Shrinkage Limit Set , T625/1 1
complete in Plastic
Carrying case Includes:
1- Evaporating Porcelain V502/3 1
dish 160 mm dia.
2- Shrinkage Dishes , 45 V625/3 1
mm dia. ( 2 pieces)
3- Glass cup , 60 cc. V625/7 1
4-Glass Prong plate T625/4 1
5- Glass Graduated cylinder V232/2 1
25 cc.
6- Spatula with blade of DV719 1
33X120 mm
E284 Plastic Limit Set , T625/2 1
complete in Plastic
Carrying case Includes:
1- Aluminum moisture DV790S 1
Cans ( 6 pieces)
2- Spatula with blade of DV719 1
33X120 mm
3- Evaporating Porcelain V503/2 1
dish 160 mm dia.
4- Glass plate 30X30X1 Cm T668 1
E285 Specific gravity test set T620 1
includes:
1- Wire basket for samples T620/1 1
( Stainless)
2- Sand absorption Cone T620/2 1
and tamper
3- Glass Pycnometer 850cc. V753 1
capacity with conical
top
E286 High speed Stirrer with T658/2 1
stainless steel cup
E287 Glass cylinder 1000 cc. V235/C 6
E288 Soil Hydrometer type 152 T626/1 1
H
E289 Soil Hydrometer type 151 T626/2 1
H
E290 Sieve Shaker , intensity of SS208/4 1
vibration 3000 Vibr./min. ,

34
Timer 0-60 min.
E291 Set of 10 stainless steel SA405 1
Sieves 200 mm dia. , 1 " , set
0.5 " , 0.25 " No. 10-18-
40-60-100-140-200
E292 Sieve Pan & cover for 200 SA203 1
mm dia. Stainless steel
E293 Brush 60X30X270 mm fine DV229/3 1
wire
E294 Brush 185X70X50 mm DV229/4 1
E295 Brush 40X40X270 mm DV229/5 1
E294 Standard Proctor Mould 4 " T631 1
dia. X 4.584 "
E296 Modified Proctor Mould 6 " T634 1
dia. X 4.584 "
E297 Automatic Proctor /CBR T644/1 1 20002
Compactor for 4 " and 6 "
Moulds ( UNI-ASTM-
CNR)
E298 Sampler splitter ( 12 slots – A172 1
7 mm wide complete with 3
receiving pans )
E299 Stand For Permeability tests T697/4 1
( 4- place) type for constant
and falling head tests
E300 Permeameter for soils , 4 " T690 2
dia. Complete with base
and cover
E301 Items purchased from the Local Egyptian Market
as follows :
1- Oven for Heating/ drying ICL 1
the samples (0-300Cº )
2- Centrifuge for Bitumen 1500 1
extraction 1500g
capacity
3- Digital Balance 3Kgm MARK 1 27515 BEL
3100
4- Digital Balance 30Kgm STW 30KE 1 22285 Hampel
5- Triple beam balance OHAUS 1
700series 2610gm with
3 weights
6- Triple beam balance OHAUS 1
700series 20Kgm with
5weights
7- Cupper Mould 6 " 1
8- Cupper Mould 4 " 3
9- Standard proctor 3
compaction Hammer
10-Modified proctor 1
compaction Hammer
E302 PC computer Includes : 3
1- CPU ( 2 IBM , 1 View ) 3
2- Monitor IBM 3
3- UPS – Smart 3000 APC 1
4- Laser printer hp Laser jet 1
1300
5- Key board & mouse 3

35
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of Concrete & materials Testing Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E258 Compression Test plant for Toni 1 Toni Germany
efficient quality control on Technik
Building Materials Includes :
1- load frame for compression tests 2031.2000.000 1
on construction materials (
concrete Specimens):
Load measuring range : 40 to
2000 KN
2- Load frame designed in 2031.2000.001 1
accordance with standards DIN
51302 , Part2 and BS 1881 ,
Part 115
3- Pressure plate dimensions 2031.2000.32 2
320X520cm
4- Auxiliary plate , 300mm Dia. 2031.3000.44 2
X 65mm Height
5- Device for splitting tensile tests X4086 1
on cylinders with dia. 150mm
and length 300mm according to
BS1881
6- Set of loading bearers 320mm 4086.010 1
long , radius 75mm for splitting
tensile tests on cylinders with
dia. 150mm and length 300mm

7- Electronic Extensiometer inside 0712.002 1


metal carrying case for
evaluation of young's Modulus
at concrete cylinders , drilling
cores and prisms . includes:
- double extension sensor
-Two measuring amplifiers
-Two clamping devices
- Four divided rulers
8- Load frame for bending tests on 2070.0200 1
concrete bars , concrete blocks
products :
Load measuring range : 4 to 200
kN
9-Additional device for bending 2070.030 1
tests with four points loading in
accordance with DIN1048
10- Electronic deflection 0722 1
measurement device inside
metal carrying case includes:
- Two inductive detectors type
Hottinger W10TK bearing
upon the movable middle
support
- Measuring amplifier for both

36
detectors with divided signals
11- Power Box ToniNORM Series 2010.010 1
: Systems fitting table in rigid
steel frame to serve up to three
hydraulic load frame (oil tank
20 Lt. ).
12- ToniTROL "expert"-Computer 0510.020 1
–Controlled measuring and
control system for the functions
measuring , controlling ,
monitoring and evaluating of
building materials testing
machines .
Software for Toni Machine
includes:
1 - Basic Software for load 0510.101
controlled tests
2 - Software Module " 0510.105
E259 Determination of the Modulus
Elasticity" for FULL automatic
determination of elasticity
3- PC Evaluation Software 0510.301
ToniSOFT 4 for compression
and bend tests
E260 Accessories & Spare parts for
Toni Machine includes:

1-Steel plate 10X10X40Cm 1 2010-


Straight Pin with screwed 02.01e
holes
2- Deep groove ball bearing FAG 1 6004.2
( guide of piston cap)
3- Box include (8) packets of collar HILTI 1
4-VVKW Board for power control 2 9592- SAK93
40E 1,
SAK92
5
5- Sealing for hydraulic drive 1 650.35
4
6- Reflux chocker valve 1
( cylindrical locker )
7-Power Supply unit ( 220VAC – 1 3304-
24VDC) 13A
8-Relay Board ToniNORM for 1 3304- 3304-
computer interfacing 11B 11-01B
9-ON/OFF Emergency Mains Moeller 1 706.65
Switch 7
10- Shaft extension ( Alan Key) 4
11- Screening Unit for motor VAC Murre ektronik 1 722.23
terminator 575VAC/7.5KW 8
50/60Hz
12- Air break contactor ( micro Siemens 1 709.22
switch) 9
13-Exess Current (over load ) relay Siemens 1 708.30
3.2 - 5 A 8
14-Fine Fuse 1 A- Semi time-lag 1 712.15
for control device 3
15-Glass tube Fuse 6.3A-time-lag 1 712075
for control device
16-Exess Current limiter ( circuit 1 708.38
breaker) 16A 4

37
17- Hydraulic filter cartridge for 1 880.17
880.170 1
18-Separator Block AC-3Phase Siemens 1 706.07
over load relay 7.5KW400V 8
19- Hydraulic high pressure tube 3 210-
with connector 02.04
20- Hydraulic flap valve 3 882.17
6
21- Cover lock screw 5 913.36
0
22- Cover lock screw 1 913.36
1
23- Directional hydraulic seat valve 1 882.17
for deloading 9
24- Directional hydraulic seat valve 1 882.17
per machine 5
25- Hydraulic Pressure valve per 1 882.01
machine control switch 6
26-Hydraulic valve 1 882.15
4
27- Hane Hydraulic single bank 1 283.02
pump 0
28-Choker Hydraulic valve 1 882.17
7
29- High pressure intenormen 300065 1 880.17
hydraulic filter 0
30-Set of sealing O-rings for high 1 880.17
pressure hydraulic filter 2
31- High pressure tube 1.5m 1 884.04
8
32- High pressure tube 1.5m 1 884.04
6
33- Directional hydraulic seat valve 2 882.17
24VDC-1.12A 4
34-Standardized hydraulic 1 300250
ultrahigh pressure cylinder 04-
01/100
/60
35- Set of Flap valves and Nuts 1
different sizes set
36- Cylindrical metal plate 1
37- Two sides Screwed Bolt HILTI 8
M16X260 with nut ( Has)
38- Screwed Bolt M16X125 HVU 10
39-Set of plastic covers for wires 1

E261 Zwick material floor testing ZSP600 1 144736 Zwick Germany


machine includes : GmbH
1- load Frames with max. test load ZSP600.01 1
600kN
2- Hydraulic Pump drive System MS84 BZ 1 91164
3- Hydraulic power pack ZSP600.01 1 980700 000261 FMB-
8/A-S Blickle
GmbH

38
4- Electronic Controller BZSP600-11 1 144736
/0
5-Switch Unit BZSP600.11 1 144736
/0
6-Set of replacement clamping 1 set
pieces
E262 PC computer includes :
1- CPU HD 4Gb PentI 32MbRAM 2
2- Monitor MAG 2
3- Key board + Mouse 2

E263 Vibrating table , Electronic table AT223/H 1 Technote Italy


top 80X40Cm-3000Vibr./Min. st
E264 Calibration ANVIL for test AT241/A 1
Hammers , steel base and guide
E265 General purpose Containers AT224/10 1
( Aluminum) Nominal capacity10
Lt. 24X23Cm
E266 General purpose Containers AT224/14 1
( Aluminum) Nominal capacity14
Lt. 26X24Cm
E267 General purpose Containers AT224/30 1
( Aluminum) Nominal capacity30
Lt. 34X32Cm
E268 Vicat setting time apparatus , with C361 1
the following accessories:
1-Set of 6 needles dia.1mm(ASTM- C361/A6 1
AASHTO)
2- Set of 6 needles dia.1.13mm C361/B6 1
(BS,NF,UNI,EN)
3- Set of 2 needles of final setting C361/C2 1
(BS , EN )
4- Cone-Shaped Mould(NF- C361/E 1
EN196/3)
5-Glass Plate 10X10Cmm C361/V 1
E269 Flow table for mortar with Cone C375 1
and tamper(UNI)-Manual

E270 Penetrometer for concrete spring AT255 1


system inside carrying case
includes:
1- Stainless steel needles 2
2- Stainless steel head 5
3- Calibrated spring (0-100kgf , in 1
1 kgf division0
4- Adapter 2
E271 LE Chatelier Flask ASTM C188 , V754 2
AASHTO T 133)
E272 Chapman Flask ( glass) V754/1 1
E273 Concrete Test hammer inside AT241/R 1
carrying case with built –in
recorder , chart recording paper ,
Carborundum stone , and 3
additional paper roll 8 meter long
E274 Compacting Factor apparatus with AT199 1

39
steel cones and receiving Mould
E275 Concrete Test hammer inside 1 005279
carrying case with divided scale
(tecnotest)
E276 Items purchased from the Local Egyptian Market as follows :
1- Vicat without accessories 1
2- Loss Anglos Abrasion machine 1
with 1 carton of Balls
3- Sieve Shaker with pan , cover 1
and set of 9 brass sieves
4- Vibrating apparatus for concrete 1
5- Manual compression test 1
machine
6-Concrete mixing machine 1
7-Slump Cone for concrete test 1
8-Set of template for concrete 1 set
formation ( Cubic & cylindrical
)
9- Set of spatula different sizes ( 8 1 set
pieces)
10- Small Porcelain Dish with 4
tamper
11- Big Porcelain Dish with 2
tamper
12- Glass Desicator 1
13- Sand Cone apparatus 1
14- Glass volumetric flask 4
15- Graduated glass cylinder 1000 V232/C 1
cc.
16-Graduated Glass beaker 500cc. V765 1
17- Sodium Hexameta phosphate Z31 1
1Kgm
E277 Training cross section of depths 1
water pump

40
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of CNC Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E1 CNC Turning EMCO PC Turn 1 Ref. No. A7VN4002 EMCO Austria
machine 125 A7VV00 MAILER

E2 CNC Milling EMCO PC Mill 1 Ref. No. F1DN4001


Machine 125 F1DV00

E3 Control Keyboard - X9A000 17 400124/100 Ref. No.


basic case. X9A000
Includes power
supply 230V
E4 Control Keyboard- SINUMERIK 16 3.60100.675/ Ref. No
Key module 810 000-000 X9Z010

E5 Control Keyboard - SINUMERIK 16 3.60100.675/ Ref. No


Key module 820 000-000 X9Z020

E6 PC computer Pent.III 600MHz , 20 Gb Digital China


includes: Westron, 64 Mb RAM , Network Card ,
Floppy Drive, XP

- CPU 17

- Monitor ACeR 7254e 17 917602059 Monitor S/N:


V551 0765,1426,0
209,1382,03
38, 0802,
1337,0858,0
211,0206,06
58,1330,137
3,1381,0405,
1356,1053
- Keyboard & 17
Mouse
E7 Accessories :
1- Control SINUMERIK 18 3.60100.675/ M42100 000 EMCO Austria
Keyboard-Key 810 000-000 029, MAILER
module Ref. No 16,19,17,
X9Z010 28,25,32,
2- Control SINUMERIK 18 3.60100.675/ 08,31,11,
Keyboard -Key 820 000-000 20,12,29,
module Ref. No 15,09,14
X9Z020 ,30,04
3-Control X9A000 1 400124/100 Ref. No.
Keyboard X9A000
-basic case.
Includes power
supply 230V
4-Control GE Fanuc 18 3.60100677/0 M394.00.000

41
Keyboard - Series 0 000-000 .( 024 , 012 ,
Key modules (Set sets Ref. No. 025 , 022 ,
includes QTY2 X9Z110 018 , 014 ,
modules) 013 , 011 ,
020 , 019 ,
023 , 017 ,
016,) (009 ,
004 , 010 ,
012, 006 ,
022 , 007,
003 , 003 ,
005 , 008 ,
011 , 021 ,
019 )
(077 QTY5)
5- DC Connector . 91
6- Optical Tool A7Z610 1 Ref. No.
Presetter A7Z610
7- Cover for keys 136
of control keyboard
8- Cable RS232 for 18
control keyboard
9-Key for 10
tightening
10-Milling arbor F1Z860 1 Ref. No.
F1Z860
11-shell end mill F1Z850 1 Ref. No.
arbor 16 mm F1Z850
12-Grease gun 2
13-Dial gauge with 1 Ref. No.
magnetic stand 565 065
14-Tightening 4
screws for tool
turret with nuts
15-Double ended 2
spanner SW8X10
, 10X13
16- Supporting 8
metal plates
17-Bolts with nuts 12
18-Reduction A7Z270 14 Ref. No.
sleeves A7Z270
19- Clamping 2
elements for
tool turret
20- Tap Holder & A7Z280 10 Ref. No.
reducing Bushes A7Z280
21- Indexable CCMT 50 Ref. No.
inserts for steel 09T304EN-SM 271045
22- Indexable DCGT 46 Ref. No.
inserts for 070204FN-27 271056
Aluminium and
plastic
23- Indexable DCMT 50 Ref. No.
inserts for steel 070204EN-SM 271055
24- Indexable 11IR-T-A60 24 Ref. No.
inserts for ID- 260626
threat tool ,
right
25- Indexable 16ER-T-A60 25 Ref. No.
inserts for OD- 271115

42
threat tool ,
right
26- Indexable CCGT 49 Ref. No.
inserts for 09T304FN-27 271046
Aluminium and
plastic
27- Indexable 16ER-T-G 60 24
inserts for OD-
threat tool , left
28- Indexable LFMX 31SN - 24
inserts FX
29- Collets in ESX16 12 Ref. No.
Wooden box 152 700
30- Collets ESX16 1 Ref. No.
152 700
31- Slot milling 4 mm 5 Ref. No.
cutter , HSS, 764302
DIN 327B
32- Slot end mill , 3 mm 5 Ref. No.
HSS, DIN 327 764301
33- Individ. Tap M6 4 Ref. No.
drill M6 DIN352 781304
34- Slot milling 8 mm 5 Ref. No.
cutter , HSS, 764306
DIN 327B
35- Slot milling 10 mm 2 Ref. No.
cutter , HSS, 764308
DIN 327B
36- Angle milling 16X4 mm 4 Ref. No.
cutter 45 Degree 771050
37-Radius milling 10 mm 4
cutter
38-Twist drill 12 mm 5 Ref. No.
DIN 1897 271200
39-Centre drill A8 A8 4 Ref. No.
DIN 333 271220
40- Set 9 twist drill 2- 10 mm 44 Ref. No.
(1 m graded) 260628
41- boring tool left 10X60 mm 1 Ref. No.
S10D SDUCL07 271140
42-Heavy Duty 16X20X40 mm 4 Ref. No.
shell end mill 764410
,HSS
43-Screw driver 3
44-Alen Key 5
45- Rectangular 3
Keys
E8 SoftWare of CNC
1- EMCO software Ref. No. 2
WinNC GE X5AC50
Fanuc Series o –
T/M for PC
machines (32-
bit)
2- EMCO Software Ref. No. 2
WinNC X5AC00
SINUMERIK
810/820 T/M for
PC machines
(32-bit)
3-Software EMCO Ref. No. 1

43
3D-View, mill, X5A160
machine licence
and single
licence ( 32-bit)

4-EMCO Software Ref. No. 1


WinCTS X8Y100
SINUMERIK
810/820 T/M(16-
bit)
5- EMCO Software Ref. No. 1
WinCTS GE X8Y150
Fanuc Series 0 –
T+M (16-bit)
6- Software EMCO Ref. No. 1
3D-View ,mill, X5Y180
multiple licence
(16-bit)
7- Software EMCO Ref. No. 1
3D-View X5Y170
,turning ,
multiple licence
(16-bit)
8- Software EMCO Ref. No.
3D-View, X5A150
Turning ,
machine license
and single
licence ( 32-bit)

44
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of Fluid Mechanics Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E304 Hydraulic bench F1-10 1 Armfield England
E305 Flow In Pipe Networks bench C11 1
E306 Hydraulic pressure F1-12 1 10363-7
E307 Bernoulli's Theorem Demonstration F1-15 1
apparatus
E308 Orifice & Jet apparatus F1-17 1
E309 Orifice Discharge F1-17a 1
E310 Energy loss in pipes F1-18 1
E311 Energy loss in bends F1-22 1
E312 Center fugal Pumps FM20 1
Demonstration Unit
E313 Series/ Parallel Pumps FM21 1
Demonstration Unit
E314 Interface Device ( Capture ) for IFD4 1
computer connection to FM20 ,
FM21
E315 Variable Transformer ( power SWA1 2
supply Unit )
E316 Pc computer ( PentI , 16MbRAM , IBM 1
1.7GBHD, WIN 95) Connected to
FM20 ,FM21
E317 Accessories:
1- Set of spares for C11 & F1-10 2 sets
includes :
a- Two Fans for Pump
b- Two Ball bearing
c- O-ring
d- Plastic tube 1 cm dia.
2- Set of O-rings for C11 1 set
3- Rubber ball & two plastic clips 2
for C11 &F1-10
4- Set of 2 glass tubes (120Cm) 1 set
for C11 manometer
5- Set of spares for F1-10 Includes: 1 set
a- Cylinder Container PMP
250mL # Fo3371
b- Rigid plastic tube
c- Rubber ball
d- O-ring
e- Two washers
6- Plastic tube for C11 1
7- Set of Spares for FM20 & FM21 2 sets
Includes:
a- 8 Bolts
b- Washers for Pumps
c- Clips
d- Spring
e- Plastic tube 0.8m dia.
8- Injection Siring for FM20 & 2
FM21
9- Set of Spares for F1-17 # 1 set
W10467-1 includes:
a- Plastic Tube 0.9mm dia.

45
b- Plastic tube 2 cm dia.
c- Set of O-rings ( QTY 9)
d- Plastic tube connector
10- Plastic tube for F1-17 with tube 1
connector and O-ring

11- Plastic tube for F1-22 with tube 1


connector and 5 clamping clips
12- Plastic tube 1 " dia. For F1-18 1
13- Plastic tube 0.5 " dia. For F1- 1
18
14- Plastic tube 0.8Cm dia. For F1- 1
18
15- Plastic Tube connector for F1- 2
18
16- Tube Close up clips for F1- 2
18
17- Plastic tube 0.8Cm dia. For F1- 1
15
18- Hand Held air charger for F1- 2
15
19- O-ring 0.4mm dia for F1-15 1
20- Fiber Washer 25 Cm dia. 2
21- Set of 6 glass tubes (80 Cm) for 1 set
manometers
22- Set of 3 graduated glass 1 set
container ( 250 , 1000mL)
23- Plastic tube 2 Cm dia with 1
plastic connector
24- Set of Aluminum tubes ( 5 1 set
pieces)
25- Network cables for interface 8
device IFD4 with connectors

46
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of Heat Transfer & Air conditioning Lab
Apparatus

ID Name Model QTY S/N Manuf. Made in


Oven : STF55433C 2 017G-327482-0G LindBERG/BLUE M
240VAC-1 Phase , 25A
1 6.5KW
Max. 1500 C° USA
Oven : CC59256PCOMC 4 N29G-325365-0G
2 208/240VAC-1 Phase , 30A X25F-315949-ZF
– Z27F-321957-NG
Max. 1700 C° ( None)
Oven : BF51433C 1 N23G-324692-OG
3 240VAC-1 Phase , 27A
6.5KW
Max. 1500 C°
Automotive –Air
4 Conditioning Unit
5 Air handling Unit 1
6 Air Distributor unit 1

47
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Surveying Lab
Apparatus
ID Name Model QTY P/N S/N Manuf. Made in
E240 Electronic Total Station SET600 1 D-21828 18068 SOKKIA Japan
( inside Bag)
E241 Theodolite 2 DT5A/DT5 160749 ,
(inside Bag) AS – 155640
D20524
E242 Plani meter 1 10891
E243 Auto Level AT-G2 2 AW4025 , TOPCO Japan
(inside bag) AW4392 N
E244 Laser mark with : 1 010141 CST USA
-Universal laser detector Corp.
-Meter( Scale)
-( inside bag )
E245 Tri bode 7 SOKKIA Japan
E246 Compass ( ENGINEER) 1
E247 Fiber glass tape measure Kamelan 3
50 m open reel type
E248 Metal Vertical Rule 4 m 4 Germany
( B
E249 Wooden Vertical Rule 4 m 1
( B
E250 Iron bare (  CD E) 10
E251 Wooden bare ( 7FD CD E) 30
E252 ;20  G 5
E253 PC computer includes: 1
1- CPU Ebony 1 933I5F 0EI0109001 Everex China
0100
2- Monitor 1 SA-558G FX1U17008
7557

48
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of Hydraulic Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in


E301 Multipurpose Teaching Flume C4 1 Armfield England
C4 Includes :
1- Rectangular section 5 m 1
2- Inlet Tank 1
3- Discharge Tank 1
4- Service module ( ON/OFF 1
Pump)
5- Shunt type flow meter 1
6- Flow control Valve 1
7- Point Gauge ( 0-160 . 0-300) 2
8- Hand wheel 1
E302 Axial Flow Pump Turbine test R18 1
circuit R18 Includes
1- Service Pump 2
2- Flow measuring equipment 1
3- Head measuring equipment 1
4- System of pipe work and valves 1
E303 Accessories :
1- Set of 6 pieces floor for 1 set
rectangular section
2- Point gauge (0-300) 3
3- Manometer Board with two 1
fluid bottles
4- Variable speed motor drive 643 1
R15
BXD
5- Stainless Steel guided way for 2
C4 tanks
6- Plastic tube 9mm dia. 3 m length 2
7- Mechanical seals with springs 1
8- Set of Char pones for motor 1
9- Set of spares for C4 Machines 1set
includes: 2
a- Rigid plastic tube 20Cm
dia.X20Cm length with its 3
clips. 1
b- Newplast Non Toxic 500gm. 1
c- washer & O-ring
d- Plastic tube 1cm dia.
10- Rubber washer # 35231 2
11- Tube cover with rubber washer 1
12- Glass tube dia. 8cm length 8cm 1
13- Bolt M12X87 with nut & 7
washer
14- Bolt M16X107 with nut & 4
washer
15- Gig Bolt with Nut 4
16- Set of cupper weights for 1 set
balance
( 5 pieces) , 5, 20 , 50 gm
17- Set of iron weights for balance 1 set
( 5 pieces) , 50 , 200 , 500 ,
1000 gm

49
18- Adjustable water gates for C4 3

19- Wooden pieces for C4 2


20- Drained water filter for C4 1
21- Belt for vertical Balance for 1
R18
22- Graduated plastic container 1
250ml
23- Clamping clips with two nuts 1
for R18
24- Graphite Bearing tube for L1020 2
motors G

50
Misr University for Science & Technology ( MUST)
College of Engineering
Instruments of Printed Circuit Board Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in

E66 UV-Exposure 1 Spain


E67 Etching Device TA-400-A 2
with pump & heater
E68 Driller 2A-420W 908 1 BOSCH Brazil
E69 Base for the Driller SP43 1 Bulgaria
E70 Hand Blower 530W 1 Hitachi Japan
E71 Multimeter YX-360TRn 1 SUNWA China
E72 Soldering Gun TQ-77 1 goot Japan
30W , 200W
E73 Set of fine tools for 1
PCB
E74 Set of Soldering 1
Aid PCB Cleaning
tools
E75 Glue Gun 60W 1
E76 Hand Held de- 1
soldering tool
E77 Lens Proskit 1 8PK-
MA006
E78 Set of electronic GPB-925 1 Set
components inside
components
cabinet( LEDs
,ICs,Resistors,
Sockets , Switches)
E79 Set of experimental 1
PCBs
E80 PC computer 2
includes:
1- CPU , HD40Gb , 1
Pent 4 (2GHz) ,
256MbRAM ,
Floppy,CDROM,
XP , sound &
phones
2- Monitor Acer V551 1 7254e 1450939 Acer China
T53414
3-CPU , IBM 330 1
Pent I
4- Monitor , IBM G40
5-Laser Printer hp Hp 1
laserjet1300

51
!!

 
 %&'     
( )!
*% +!,)

!!" #$
- Vibration Meter
Module 2.1 : FFT
MODULE 5: 2 CH
Vibro Report
Accelerometers , Set
Tach
- Pulse Multi – Channel Analyzer
- 2 accel
- Laptop
- Photoprobe
- FFT 2 Ch SW
- Balancing SW
- Infrared Thermometer, 600 C, 30:1 , 5 M
- Digital Oscilloscope , Tek TDS 2004 , 4 CH
- OpenChoice SW
- Cables , Connectors , etc
- Single Generator

52
.!$%
    

!!" #$
- High Gauge 600
- Dial Gauge Stand , 300
- Dial Indicator – lever 0.002/14.7
- Dial Indicator – lever 0.010/20.9
- Dial Indicator – lever 0.010/44.5
- Dial Indicator – lever universal 0.010/24.1
- Granite plate 1000 x 1000 x 100, Grade 1
- Granite Plate frame
- Roughness Tester

53
Misr University for Science & Technology ( MUST)
College of Engineering
Machines & Instruments of Architectural Lab
Apparatus

ID Name Model QTY P/N S/N Manuf. Made in

E254 Scroll Saw ( disk) FEID China


85W

E255 Scroll Saw (disk) TF-50 045753 RyobI Ltd. Japan


200W
E256 Scroll Saw (hand 430H E77414 makita Japan
held)
2.9A – 600W
E257 Rotary Saw (disk) R-502 012671 RyobI Ltd. Japan
7.9A - 1600W
With QTY(12)
replacement cutting
ends

54

You might also like