Scribd
Upload
150 views3 pages

Chemguide - Answers: Buffer Solutions

This document discusses buffer solutions and their properties. It begins by defining a buffer solution as one that resists changes in pH when small amounts of acid or base are added. It then provides examples of common buffer solutions using (1) ethanoic acid and sodium ethanoate or (2) ammonia and ammonium chloride. The document continues by explaining how these buffer solutions work to neutralize added H+ or OH- ions without significantly changing the pH. It concludes by showing sample calculations for determining the pH of different buffer solutions and the ratios needed to produce a buffer of a given pH.

Uploaded by

Islam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views3 pages

Chemguide - Answers: Buffer Solutions

This document discusses buffer solutions and their properties. It begins by defining a buffer solution as one that resists changes in pH when small amounts of acid or base are added. It then provides examples of common buffer solutions using (1) ethanoic acid and sodium ethanoate or (2) ammonia and ammonium chloride. The document continues by explaining how these buffer solutions work to neutralize added H+ or OH- ions without significantly changing the pH. It concludes by showing sample calculations for determining the pH of different buffer solutions and the ratios needed to produce a buffer of a given pH.

Uploaded by

Islam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Chemguide – answers

BUFFER SOLUTIONS

1. a) A buffer solution is one which resists changes in pH when small quantities of an acid or an alkali
are added to it.

b) You could choose any weak acid and one of its sodium (or potassium) salts. For safety, always
choose one you are certain about - in this case, ethanoic acid and sodium ethanoate.

c) You could choose any weak base and one of its salts. Again, for safety, choose one you are
certain about - in this case, ammonia and ammonium chloride.

2. a) Most of the hydrogen ions are removed by reacting with ethanoate ions to make ethanoic acid.

b) The hydroxide ions can be removed by reacting with either hydrogen ions or ethanoic acid
molecules.

With hydrogen ions:

The hydroxide ions combine with the


hydrogen ions from the equilibrium.
The hydrogen ions are replaced by the
equilibrium moving to the right. This
continues until most of the hydroxide
ions are removed.

With ethanoic acid molecules:

3. a) The hydrogen ions can react with hydroxide ions or ammonia molecules

With hydroxide ions:

The explanation here is similar to the one


above.

With ammonia molecules:

www.chemguide.co.uk
Chemguide – answers

b) The hydroxide ions react with ammonium ions:

4. a) [CH3COO-] [H+]
Ka =
[CH3COOH]
In buffer solution calculations we assume that all the ethanoate ions come from the sodium
ethanoate, and the acid is almost un-ionised.

Therefore:
0.100 x [H+]
1.74 x 10-5 =
0.100

[H+] = 1.74 x 10-5

pH = 4.76

b) [CH3COO-] [H+]
Ka =
[CH3COOH]

0.250 x [H+]
1.74 x 10-5 =
0.500

[H+] = 3.48 x 10-5

pH = 4.46

c) First you need to find the hydrogen ion concentration in a solution of pH 5.00. You should find
that comes out to 1.00 x 10-5 mol dm-3.
[CH3COO-] [H+]
Ka =
[CH3COOH]

[CH3COO-] x 1.00 x 10-5


1.74 x 10-5 =
[CH3COOH] (Note that the concentrations here are the
concentrations in the final buffer solution, and not
[CH3COO-] 1.74 x 10-5 the concentrations in the individual solutions you
= are mixing.)
[CH3COOH] 1.00 x 10-5
1.74
=
1

www.chemguide.co.uk
Chemguide – answers

So the sodium ethanoate to ethanoic acid in the buffer solution should be in the molar ratio of
1.74:1. If you had equimolar solutions (the same molar concentration of both), then you could mix,
say, 174 cm3 of sodium ethanoate solution with 100 cm3 of ethanoic acid solution.

5. a)

[NH3] [H+]
Ka =
[NH4+]

0.100 x [H+]
5.62 x 10-10 =
0.100

[H+] = 5.62 x 10-10

pH = 9.25

b) [NH3] [H+]
Ka =
[NH4+]

0.100 x [H+]
5.62 x 10-10 =
0.200

[H+] = 1.124 x 10-9

pH = 8.95

c) A pH of 10.00 corresponds to a hydrogen ion concentration of 1.00 x 10-10 mol dm-3.


[NH3] [H+]
Ka =
[NH4+]

[NH3] x 1.00 x 10-10


5.62 x 10-10 =
[NH4+]

[NH3] 5.62 x 10-10


=
[NH4+] 1.00 x 10-10
5.62
=
1
If you had equimolar solutions of ammonia and ammonium chloride, you would mix them in the
molar ratio of 5.62:1 - for example, 56.2 cm3 of ammonia solution to 10 cm3 of ammonium chloride
solution.

www.chemguide.co.uk

You might also like