Scribd
Upload
142 views1 page

Machine Design-I 4+1: MEC602 Common With Automobile Engineering Objectives

The document summarizes a Machine Design-I course offered at the University of Mumbai. The 4+1 credit course covers principles of machine design, strength design concepts, and preparing working drawings. Learners will be able to demonstrate design considerations, design machine elements based on strength, use design references, and create production drawings. The course has 6 modules that cover topics like material properties, manufacturing considerations, curved beams, thick cylinders, bolted/welded joints, fatigue failure, shaft design, keys, couplings, and spring design.

Uploaded by

navneetkpatil8409
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views1 page

Machine Design-I 4+1: MEC602 Common With Automobile Engineering Objectives

The document summarizes a Machine Design-I course offered at the University of Mumbai. The 4+1 credit course covers principles of machine design, strength design concepts, and preparing working drawings. Learners will be able to demonstrate design considerations, design machine elements based on strength, use design references, and create production drawings. The course has 6 modules that cover topics like material properties, manufacturing considerations, curved beams, thick cylinders, bolted/welded joints, fatigue failure, shaft design, keys, couplings, and spring design.

Uploaded by

navneetkpatil8409
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Course Code Course/Subject Name Credits

&
MEC602 Machine Design-I 4+1
& Common with Automobile Engineering

Objectives
1. To study basic principles of machine design
2. To acquaint with the concepts of strength design related to various components.
3. To familiarize with use of design data books & various codes of practice.
4. To make conversant with preparation of working drawings based on designs.

Outcomes: Learner will be able to…


1. Demonstrate understanding of various design considerations
2. Apply basic principles of machine design
3. Design machine elements on the basis of strength concept
4. Use design data books and various standard codes of practices.
5. Acquire skill in preparing production drawings pertaining to various designs.

Modules Details Hrs.


Mechanical Engineering Design, Design methods, Aesthetic and
Ergonomics consideration in design
Material properties and their uses in design
01 Manufacturing consideration in design 06
Design considerations of casting and forging
Basic principles of Machine Design, Modes of failures, Factor of safety,
Design stresses, Principal stresses and strains, Theories of failures
Standards, I. S. codes, Preferred Series and Numbers.
Curved Beams: Assumptions made in the analysis of curved beams.
Design of curved beams: Bending stresses in curved beams, such as
02 crane hook, C-frame, etc. 06
Thick cylinders: Design of thick cylinders subjected to an internal
pressure using Lame’s equation.
Design against static Loads:
Cotter joint, knuckle joint, Turn Buckle
03 Bolted and welded joints under eccentric loading. 12
Power Screw - Screw Presses, C- Clamps along with the Frame, Screw
Jack
Design against Fluctuating Loads: Variables stresses, reversed,
repeated, fluctuating stresses
04 Fatigue Failure: Static and fatigue stress concentration factors 06
Endurance limit - estimation of endurance limit
Design for finite and infinite life, Soderberg and Goodman design
criteria, Fatigue design under combined stresses
Design of shaft - power transmitting, power distribution shafts
Module (excluding crank shaft) under static and fatigue criteria.
05 Keys - Types of Keys and their selection based on shafting condition. 11
Couplings- Classification of coupling. Design of Split muff couplings,
Flange couplings, Bush pin flexible couplings
Design of Springs:
06 Helical compression, tension springs under static and variable loads, 07
Leaf springs.

26/113
University of Mumbai, Mechanical Engineering (Third and Final Year) Revised Course (Rev-2012)

You might also like