Support Systems

Systems &
& Solutions
SolutionsB.V.
B.V. Cable Management
Management Solutions
SolutionsB.V.
B.V.

Cable Tray
E-STRUT BV | Postbus 10025 | 3004 AA Rotterdam | The Netherlands
T: +31 (0)10 522 33 51 | F: +31 (0)10 521 49 51
[email protected] | www.eurostrut.com

81
 150/225 wide
50/100 wide
Cable tray systems Cable tray systems

Cable tray systems 180

SAFE WORKING LOAD kg.per m.

160
140

Metsec cable tray systems have been developed Loading graphs

120working loads are represented graphically as shown
Safe
Bespoke systems
In addition to standard cable tray systems, Metsec has the
and100are based on the cable tray being continuous over ability to manufacture non standard cable tray systems to
after significant consultation with major installers. four80spans or more. Deflection has been limited to
60
SPAN/200 generally, based on the end span condition as
order.

Due to sophisticated equipment and software, prototypes

This ensures the systems meet and surpass key the40worst case. Deflection will be less than this on internal
spans.
20 However, on wider trays, additional deflection will
can be produced quickly for sample approval.

It is important for customers to issue the complete order at

requirements providing innovative and cost be induced
0
1.5
locally across the base of the tray, depending
1.75
on the width of the tray
450/600
2 2.25 2.5
andm the load distribution across
SPAN
the outset to allow full use of materials and avoid
the width. Thiswide
will not be detrimental to the structural expensive waste.
effective solutions in an increasingly demanding 225/300 wide
performance of the tray but may need consideration if
75/150 wide
appearance is of prime importance.

market Non-return flange - light duty

300

SAFE WORKING LOAD kg.per m.

250

Metsec cable trays are manufactured on 200

The comprehensive Metsec cable tray range
consists of three systems ranging from the light sophisticated CNC equipment in a world class 150
duty non-return flange cable tray to two manufacturing cell engaging a high level of
systems with cable-friendly return flange trays, automation for fast moving items. 100

medium duty 25mm deep and heavy duty This allows Metsec to maintain a very high 50
50mm deep. level of on time in full delivery performance.
0
The unique perforation pattern allows ease of Comprehensive stocks of cable trays and 0.5 0.75 1 1.25 1.5
SPAN m
attachment of cables with more than adequate accessories in both pre-galvanised and post hot 300/450 wide
ventilation. The side walls of the medium and dip galvanised finish are carried at all times to 50/225 wide
heavy duty ranges are also slotted as standard. ensure timely delivery.
Return
160 flange - medium duty
Development and testing

m. m.
Light duty cable trays are available in widths of

kg.per
50, 75, 100, 150, 225 and 300mm. Medium duty Metsec cable tray systems have been fully 140
160
tested to develop accurate loading graphs.

kg.per
trays are available in widths of 50, 75, 100,150, 140
120

LOAD
225, 300, 450 and 600mm. Heavy duty trays are Further verification tests have also been done 100
120

LOAD
available in widths of 75, 100, 150, 225, 300, under the requirements of BS EN 61537:2007 –

WORKING
80
100
450, 600, 750 and 900mm wide. Cable management – cable tray systems and

WORKING
60
80
cable ladder systems. These tests include
Each type of tray is a total system with a wide 40
60
impact resistance, marking, connection of

SAFESAFE
selection of support accessories to provide
re-usable components, safe working load tests, 40
20
comprehensive site installation solutions.
electrical continuity, and performance of steel at 0
20
1 1.25 1.5 1.75 2
extreme temperature ranges. SPAN m
0
1 300/600 wide
1.25 1.5 1.75 2
150/225 wide SPAN m
300/600 wide
50/100 wide
150/225 wide
50/100 wide

Return flange - heavy duty

180

m. m.
160
180
kg.per
kg.per
LOAD 140
160
120
140
100
LOAD

120
WORKING

80
100
WORKING

60
80
40
60
SAFESAFE

20
40
0
20
1.5 1.75 2 2.25 2.5
0 SPAN m
1.75
1.5450/600 wide 2 2.25 2.5
225/300 wide SPAN m
450/600wide
75/150 wide
225/300 wide
75/150 wide

33
82
300
.
 150/225 wide
50/100 wide
Cable tray systems Cable tray systems

Cable tray systems 180

SAFE WORKING LOAD kg.per m.

160
140

Metsec cable tray systems have been developed Loading graphs

120working loads are represented graphically as shown
Safe
Bespoke systems
In addition to standard cable tray systems, Metsec has the
and100are based on the cable tray being continuous over ability to manufacture non standard cable tray systems to
after significant consultation with major installers. four80spans or more. Deflection has been limited to
60
SPAN/200 generally, based on the end span condition as
order.

Due to sophisticated equipment and software, prototypes

This ensures the systems meet and surpass key the40worst case. Deflection will be less than this on internal
spans.
20 However, on wider trays, additional deflection will
can be produced quickly for sample approval.

It is important for customers to issue the complete order at

requirements providing innovative and cost be induced
0
1.5
locally across the base of the tray, depending
1.75
on the width of the tray
450/600
2 2.25 2.5
andm the load distribution across
SPAN
the outset to allow full use of materials and avoid
the width. Thiswide
will not be detrimental to the structural expensive waste.
effective solutions in an increasingly demanding 225/300 wide
performance of the tray but may need consideration if
75/150 wide
appearance is of prime importance.

market Non-return flange - light duty

300

SAFE WORKING LOAD kg.per m.

250

Metsec cable trays are manufactured on 200

The comprehensive Metsec cable tray range
consists of three systems ranging from the light sophisticated CNC equipment in a world class 150
duty non-return flange cable tray to two manufacturing cell engaging a high level of
systems with cable-friendly return flange trays, automation for fast moving items. 100

medium duty 25mm deep and heavy duty This allows Metsec to maintain a very high 50
50mm deep. level of on time in full delivery performance.
0
The unique perforation pattern allows ease of Comprehensive stocks of cable trays and 0.5 0.75 1 1.25 1.5
SPAN m
attachment of cables with more than adequate accessories in both pre-galvanised and post hot 300/450 wide
ventilation. The side walls of the medium and dip galvanised finish are carried at all times to 50/225 wide
heavy duty ranges are also slotted as standard. ensure timely delivery.
Return
160 flange - medium duty

50, 75, 100, 150, 225 and 300mm. Medium duty

Development and testing

m. m.
Light duty cable trays are available in widths of

trays are available in widths of 50, 75, 100,150,

kg.per
Metsec cable tray systems have been fully 140
160
tested to develop accurate loading graphs.

kg.per
140
120

LOAD
available in widths of 75, 100, 150, 225, 300,
225, 300, 450 and 600mm. Heavy duty trays are Further verification tests have also been done 100
120

450, 600, 750 and 900mm wide.

LOAD
under the requirements of BS EN 61537:2007 –

WORKING
80
100
Cable management – cable tray systems and

WORKING
60
80
cable ladder systems. These tests include
Each type of tray is a total system with a wide 40
60
impact resistance, marking, connection of

SAFESAFE
selection of support accessories to provide
re-usable components, safe working load tests, 40
20
comprehensive site installation solutions.
electrical continuity, and performance of steel at 0
20
1 1.25 1.5 1.75 2
extreme temperature ranges. SPAN m
0
1 300/600 wide
1.25 1.5 1.75 2
150/225 wide SPAN m
300/600 wide
50/100 wide
150/225 wide
50/100 wide

Return flange - heavy duty

180

m. m.
160
180
kg.per
kg.per
LOAD 140
160
120
140
100
LOAD

120
WORKING

80
100
WORKING

60
80
40
60
SAFESAFE

20
40
0
20
1.5 1.75 2 2.25 2.5
0 SPAN m
1.75
1.5450/600 wide 2 2.25 2.5
225/300 wide SPAN m
450/600wide
75/150 wide
225/300 wide
75/150 wide

32 33
83
300
.
Cable tray systems Cable tray systems

Cable tray systems

System configuration and support Materials and finishes
Metsec cable trays are designed as a complete (e.g. bends, tees, crossovers etc.) have adequate Materials and finishes available are
system with simple accessories. Integral support with additional supports for larger mild steel pre-galvanised as standard,
connectors are included for bends tees etc. for components. Light duty cable tray straights mild steel hot dip galvanised after
all cable tray ranges. have one end swaged for easy connection to the manfacture and stainless steel grade
next tray. When light duty straight trays are cut 316L to order.
When installing Metsec cable trays care should
to smaller lengths on site connection to the next Mild steel pre galvanised:
be taken to ensure accessories
tray requires a fishplate. manufactured from steel complying
with BS EN 10346 2009.
Mild steel hot dip galvanised:
manufactured from steel complying
with BS EN 10130:2006 and hot dip
galvanised after manufacture to
BS EN 1461:2009.
Internal riser Stainless steel: manufactured from
stainless steel grade 316L complying
with BS EN 10088-2:2005.
90° flat bend

45° flat bend

Straight length

Equal tee

Technical construction details Straight reducer

Medium and heavy duty cable tray
systems have cable-friendly return
flanges that are also slotted for all
Straight length
widths as standard. The unique
perforation pattern in the base of the
cable trays allows ease of attachment
for cables with more than adequate
Straight length 12
ventilation. All Metsec cable tray
ranges have the same plan footprint Widths 50 to 225
that facilitates the set out of cable runs 12
8.0

Crossover
prior to finalisation of design. 18 Widths 50 to 225
12
39.0 Width 300
Straight length
18 Widths 50 to 225
Light duty
25
39.0 Width 300
18
15.0 Widths 50 to 600
25 Width 300
15.0

8.0

8.0 Widths 50 to 600

25
50
Medium duty
External riser Widths 50 to 600
50 Widths 75 to 900
DB illus here 90° flat bend

50
Widths 75 to 900

Straight length
Widths 75 to 900

Heavy duty

35
84
 Cable tray systems Cable tray systems

Cable tray systems

System configuration and support Materials and finishes
Metsec cable trays are designed as a complete (e.g. bends, tees, crossovers etc.) have adequate Materials and finishes available are
system with simple accessories. Integral support with additional supports for larger mild steel pre-galvanised as standard,
connectors are included for bends tees etc. for components. Light duty cable tray straights mild steel hot dip galvanised after
all cable tray ranges. have one end swaged for easy connection to the manfacture and stainless steel grade
next tray. When light duty straight trays are cut 316L to order.
When installing Metsec cable trays care should
to smaller lengths on site connection to the next Mild steel pre galvanised:
be taken to ensure accessories
tray requires a fishplate. manufactured from steel complying
with BS EN 10346 2009.
Mild steel hot dip galvanised:
manufactured from steel complying
with BS EN 10130:2006 and hot dip
galvanised after manufacture to
BS EN 1461:2009.
Internal riser Stainless steel: manufactured from
stainless steel grade 316L complying
with BS EN 10088-2:2005.
90° flat bend

45° flat bend

Straight length

Equal tee

Technical construction details Straight reducer

Medium and heavy duty cable tray
systems have cable-friendly return
flanges that are also slotted for all
Straight length
widths as standard. The unique
perforation pattern in the base of the
cable trays allows ease of attachment
for cables with more than adequate
Straight length 12
ventilation. All Metsec cable tray
ranges have the same plan footprint Widths 50 to 225
that facilitates the set out of cable runs 12
8.0

Crossover
prior to finalisation of design. 18 Widths 50 to 225
12
39.0 Width 300
Straight length
18 Widths 50 to 225
Light duty
25
39.0 Width 300
18
15.0 Widths 50 to 600
25 Width 300
15.0

8.0

8.0 Widths 50 to 600

25
50
Medium duty
External riser Widths 50 to 600
50 Widths 75 to 900
DB illus here 90° flat bend

50
Widths 75 to 900

Straight length
Widths 75 to 900

Heavy duty

34
85
Cable tray systems Cable tray systems

Standards
Metsec Cable Tray Systems generally conform to 6.3 According to electrical continuity characteristics 6.6 According to temperature Minimum internal radius of fittings
BS EN 61537:2007 Cable management - cable tray 6.3.2 Metsec cable tray systems have electrical continuity 6.6.1 Minimum temperature for the system components is Minimal internal radius of fittings available for the
systems and cable ladder systems. characteristics given in Table 2. accommodation of cables is 125mm.
6.4 According to electrical conductivity 6.6.2 Maximum temperature for the system components is
Information relating to compliance is detailed/highlighted 9 Construction
6.4.1 Metsec cable tray systems are electrically conductive given in Table 3.
within the following sections of the standard: 9.1 Surfaces of system components which are likely to
system components come into contact with cables during installation are
6 Classification Table 2 - Minimum Table 3 - Maximum
6.5 According to resistance against corrosion inspected to ensure they shall not cause damage to the
6.1 According to material temperature classification temperature classification
6.5.2 Metsec cable tray systems are made of steel with cables when installed correctly.
6.1.1 Metsec cable tray systems are metallic system Minimum transport, storage Maximum transport, storage
metallic finishes or stainless steel 9.2 As with all metallic system components, care should be
components installation and application installation and application
temperature °C temperature °C exercised that handling is in accordance with the relative
(Resistance to corrosion is classified according to Table 1
6.2 According to resistance to flame propagation +5 +40 COSHH regulations and gloves should be worn.
and follow the relevant specification in Table 8, with -5 +60
6.2.2 Metsec cable tray systems are non-flame 9.3 Screwed connections have been designed to withstand
compliance according to Table 7.) - 15 +90
propagating system components - 20 +105 the mechanical stresses occurring during installations and
- 40 +120 normal use and will not cause damage to cables when
- 50 +150
correctly inserted. Screwed connections are in general ISO
6.7 According to the free base area of the cable tray length metric threads fully compliant to tests in accordance with
Table 1 - classification for resistance against corrosion
as given in Table 4. 9.3.1 and 9.3.2 of the standard. Metsec cable tray systems
Class Reference - material and finish
are usually assembled using M6 roofing bolts particularly
0 (a) None Table 4 - Perforation base classification
for couplers, fishplates and connection to supporting
1 Electroplated to a minimum thickness of 5 µm Classification Perforation in the base area
framework. These bolts should be tightened to a torque of
2 Electroplated to a minimum thickness of 12 µm A Up to 2%
12N/m.
3 Pre - galvanised to grade 275 to EN 10327 and EN 10326 B Over 2% and up to 15%
C Over 15% and up to 30%
4 Pre - galvanised to grade 350 to EN 10346: 2009 10 Mechanical properties
D More than 30%
5 Post - galvanised to a zinc mean coating thickness (minimum) of 45 µm according to ISO 1461 for zinc thickness only Cable tray lengths have been tested generally in
Note: Classification D relates to IEC 60364 - 5 - 52 Subclause A.52.6.2
6 Post - galvanised to a zinc mean coating thickness (minimum) of 55 µm according to ISO 1461 for zinc thickness only second paragraph accordance with the standard under 10.2 and 10.3 for
7 Post - galvanised to a zinc mean coating thickness (minimum) of 70 µm according to ISO 1461 for zinc thickness only verification of the loading graphs. It should be noted that
6.9 According to impact resistance
8 Post - galvanised to a zinc mean coating thickness (minimum) of 85 µm according to ISO 1461 for zinc thickness only independent testing has been carried out to verify the
6.9.4 System component offering impact resistance up to
9A Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 without a post structural performance of the cable trays at the minimum
treatment (b) 20 J (as verified by testing in accordance with 10.9 Test for
and maximum temperature classifications for test
9B Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 without a post impact resistance.)
conditions under 10.2.2.
treatment (b)

7.1 Each system component is marked by a label. Labels

7 Marking and documentation
9C Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 with a post All accessories eg bends, tees etc should be directly
treatment (b)
supported by a suitable support device or devices at
9D Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 with a post used fully comply with the rubbing test. Boxed items are
appropriate positions.
treatment (b) labelled on the packaging
(a) For materials which have no declared corrosion resistance classification
(b) The post-treatment process is used to improve the protection against crevice crack corrosion and the contamination by other steels
8 Dimensions
Key cross sectional dimensions for straight cable trays
Part No. External Internal External Internal X-sectional
depth mm depth mm width mm width mm area mm2
Table 7 - System component compliance and classification for Table 8 - Zinc coating thickness of reference (Internal)
resistance against corrosion materials CTSL12/0050# 12 11.1 50 48.2 535
System component Classification Compliance Subclause for Class Minimum Minimum coating Mean coating CTSL12/0075# 12 11.1 75 73.2 813
Material and finishes according to compliance check Thickness thickness as given in thickness (minimum) CTSL12/0100# 12 11.1 100 98.2 1090
BSEN 10346:2009 to ISO 1461 CTSL12/0150# 12 11.1 150 148.2 1645
Non - metallic 6.5.1 Declaration 14.2.1 CTSL12/0225# 12 11.1 225 223.2 2478
µm µm µm
Reference - 6.5.2 Table 1 Declaration 14.2.2 CTSL18/0300# 18 16.8 300 297.6 5000
0 (a) - - -
zinc coating classes 1 to 8 or measurement CTSL25/0050# 25 24.3 50 48.6 1181
1 5 - -
as in Table 1. CTSL25/0075# 25 24.3 75 73.6 1788
2 12 - -
Non - referenced zinc 6.5.2 Table 1 By neutral salt 14.2.3 CTSL25/0100# 25 24.3 100 98.6 2396
3 - 15 -
coating classes 1 to 8 spray test NSS CTSL25/0150# 25 24.1 150 148.2 3572
4 - 19 -
CTSL25/0225# 25 24.1 225 223.2 5379
Reference - stainless 6.5.2 Table 1 Declaration 14.2.2 5 - - 45
CTSL25/0300# 25 24.0 300 298.0 7152
steel as in Table 1. Class 9A to 9D 6 - - 55
CTSL25/0450# 25 23.8 450 447.6 10653
Non-referenced Not classified Declaration None 7 - - 70
CTSL25/0600# 25 23.8 600 597.6 14223
stainless steel 8 - - 85
CTSL50/0075# 50 49.2 75 73.4 3611
(a) As declared by the manufacturer or responsible vendor CTSL50/0100# 50 49.2 100 98.4 4841
Other metallic coatings 6.5.2 Table 1 By neutral salt 14.2.3
Column 1 classes spray test NSS CTSL50/0150# 50 49.1 150 148.2 7277
1 to 8 CTSL50/0225# 50 48.8 225 222.6 10863
CTSL50/0300# 50 48.8 300 297.6 14523
Aluminium alloys or other 6.5.3 Under Under 14.2.4
CTSL50/0450# 50 48.5 450 447.0 21680
metals consideration consideration
CTSL50/0600# 50 48.5 600 597.0 28955
Organic coatings 6.5.4 Under Under 14.2.5 CTSL50/0750# 50 48.0 750 746.0 35808
consideration consideration CTSL50/0900# 50 48.0 900 896.0 43008

37
86
 Cable tray systems Cable tray systems

Standards
Metsec Cable Tray Systems generally conform to 6.3 According to electrical continuity characteristics 6.6 According to temperature Minimum internal radius of fittings
BS EN 61537:2007 Cable management - cable tray 6.3.2 Metsec cable tray systems have electrical continuity 6.6.1 Minimum temperature for the system components is Minimal internal radius of fittings available for the
systems and cable ladder systems. characteristics given in Table 2. accommodation of cables is 125mm.
6.4 According to electrical conductivity 6.6.2 Maximum temperature for the system components is
Information relating to compliance is detailed/highlighted 9 Construction
6.4.1 Metsec cable tray systems are electrically conductive given in Table 3.
within the following sections of the standard: 9.1 Surfaces of system components which are likely to
system components come into contact with cables during installation are
6 Classification Table 2 - Minimum Table 3 - Maximum
6.5 According to resistance against corrosion inspected to ensure they shall not cause damage to the
6.1 According to material temperature classification temperature classification
6.5.2 Metsec cable tray systems are made of steel with cables when installed correctly.
6.1.1 Metsec cable tray systems are metallic system Minimum transport, storage Maximum transport, storage
metallic finishes or stainless steel 9.2 As with all metallic system components, care should be
components installation and application installation and application
temperature °C temperature °C exercised that handling is in accordance with the relative
(Resistance to corrosion is classified according to Table 1
6.2 According to resistance to flame propagation COSHH regulations and gloves should be worn.
compliance according to Table 7.)
+5 +40
and follow the relevant specification in Table 8, with -5 +60
6.2.2 Metsec cable tray systems are non-flame 9.3 Screwed connections have been designed to withstand
- 15 +90
propagating system components - 20 +105 the mechanical stresses occurring during installations and
- 40 +120 normal use and will not cause damage to cables when
- 50 +150
correctly inserted. Screwed connections are in general ISO
6.7 According to the free base area of the cable tray length metric threads fully compliant to tests in accordance with
Table 1 - classification for resistance against corrosion
as given in Table 4. 9.3.1 and 9.3.2 of the standard. Metsec cable tray systems
Class Reference - material and finish
are usually assembled using M6 roofing bolts particularly
0 (a) None Table 4 - Perforation base classification
for couplers, fishplates and connection to supporting
1 Electroplated to a minimum thickness of 5 µm Classification Perforation in the base area
framework. These bolts should be tightened to a torque of
2 Electroplated to a minimum thickness of 12 µm A Up to 2%
12N/m.
3 Pre - galvanised to grade 275 to EN 10327 and EN 10326 B Over 2% and up to 15%
C Over 15% and up to 30%
4 Pre - galvanised to grade 350 to EN 10346: 2009 10 Mechanical properties
D More than 30%
5 Post - galvanised to a zinc mean coating thickness (minimum) of 45 µm according to ISO 1461 for zinc thickness only Cable tray lengths have been tested generally in
Note: Classification D relates to IEC 60364 - 5 - 52 Subclause A.52.6.2
6 Post - galvanised to a zinc mean coating thickness (minimum) of 55 µm according to ISO 1461 for zinc thickness only second paragraph accordance with the standard under 10.2 and 10.3 for
7 Post - galvanised to a zinc mean coating thickness (minimum) of 70 µm according to ISO 1461 for zinc thickness only verification of the loading graphs. It should be noted that
6.9 According to impact resistance
8 Post - galvanised to a zinc mean coating thickness (minimum) of 85 µm according to ISO 1461 for zinc thickness only independent testing has been carried out to verify the
6.9.4 System component offering impact resistance up to
9A Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 without a post structural performance of the cable trays at the minimum
treatment (b) 20 J (as verified by testing in accordance with 10.9 Test for
and maximum temperature classifications for test
9B Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 without a post impact resistance.)
conditions under 10.2.2.
treatment (b)

7.1 Each system component is marked by a label. Labels

7 Marking and documentation
9C Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 with a post All accessories eg bends, tees etc should be directly
treatment (b)
supported by a suitable support device or devices at
9D Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 with a post used fully comply with the rubbing test. Boxed items are
appropriate positions.
treatment (b) labelled on the packaging
(a) For materials which have no declared corrosion resistance classification
(b) The post-treatment process is used to improve the protection against crevice crack corrosion and the contamination by other steels
8 Dimensions
Key cross sectional dimensions for straight cable trays
Part No. External Internal External Internal X-sectional
depth mm depth mm width mm width mm area mm2
Table 7 - System component compliance and classification for Table 8 - Zinc coating thickness of reference (Internal)
resistance against corrosion materials CTSL12/0050# 12 11.1 50 48.2 535
System component Classification Compliance Subclause for Class Minimum Minimum coating Mean coating CTSL12/0075# 12 11.1 75 73.2 813
Material and finishes according to compliance check Thickness thickness as given in thickness (minimum) CTSL12/0100# 12 11.1 100 98.2 1090
BSEN 10346:2009 to ISO 1461 CTSL12/0150# 12 11.1 150 148.2 1645
Non - metallic 6.5.1 Declaration 14.2.1 CTSL12/0225# 12 11.1 225 223.2 2478
µm µm µm
Reference - 6.5.2 Table 1 Declaration 14.2.2 CTSL18/0300# 18 16.8 300 297.6 5000
0 (a) - - -
zinc coating classes 1 to 8 or measurement CTSL25/0050# 25 24.3 50 48.6 1181
1 5 - -
as in Table 1. CTSL25/0075# 25 24.3 75 73.6 1788
2 12 - -
Non - referenced zinc 6.5.2 Table 1 By neutral salt 14.2.3 CTSL25/0100# 25 24.3 100 98.6 2396
3 - 15 -
coating classes 1 to 8 spray test NSS CTSL25/0150# 25 24.1 150 148.2 3572
4 - 19 -
CTSL25/0225# 25 24.1 225 223.2 5379
Reference - stainless 6.5.2 Table 1 Declaration 14.2.2 5 - - 45
CTSL25/0300# 25 24.0 300 298.0 7152
steel as in Table 1. Class 9A to 9D 6 - - 55
CTSL25/0450# 25 23.8 450 447.6 10653
Non-referenced Not classified Declaration None 7 - - 70
CTSL25/0600# 25 23.8 600 597.6 14223
stainless steel 8 - - 85
CTSL50/0075# 50 49.2 75 73.4 3611
(a) As declared by the manufacturer or responsible vendor CTSL50/0100# 50 49.2 100 98.4 4841
Other metallic coatings 6.5.2 Table 1 By neutral salt 14.2.3
Column 1 classes spray test NSS CTSL50/0150# 50 49.1 150 148.2 7277
1 to 8 CTSL50/0225# 50 48.8 225 222.6 10863
CTSL50/0300# 50 48.8 300 297.6 14523
Aluminium alloys or other 6.5.3 Under Under 14.2.4
CTSL50/0450# 50 48.5 450 447.0 21680
metals consideration consideration
CTSL50/0600# 50 48.5 600 597.0 28955
Organic coatings 6.5.4 Under Under 14.2.5 CTSL50/0750# 50 48.0 750 746.0 35808
consideration consideration CTSL50/0900# 50 48.0 900 896.0 43008

36
87
Cable tray systems Cable tray systems

Cable tray systems

Product footprint Straight length
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Cable tray — accessory foot print Width Light duty Medium duty Heavy duty
Standard radius is 125mm mm
50 CTSL12/0050PG3 CTSL25/0050PG3 N/A
90º flat bend Crossover 75 CTSL12/0075PG3 CTSL25/0075PG3 CTSL50/0075PG3
100 CTSL12/0100PG3 CTSL25/0100PG3 CTSL50/0100PG3
150 CTSL12/0150PG3 CTSL25/0150PG3 CTSL50/0150PG3
225 CTSL12/0225PG3 CTSL25/0225PG3 CTSL50/0225PG3
300 CTSL18/0300PG3 CTSL25/0300PG3 CTSL50/0300PG3
450 N/A CTSL25/0450PG3 CTSL50/0450PG3
Radius
600 N/A CTSL25/0600PG3 CTSL50/0600PG3
Width
750 N/A N/A CTSL50/0750PG3
Length = width
+ radius Width Length = width 900 N/A N/A CTSL50/0900PG3
+ 2 x radius

Radius
Radius
Medium duty straight couplers
Ra

Ra
di

di
Only required for straight tray to straight tray connection – medium duty range
us

us
Finish: post galvanised = HDG, stainless steel grade 316 = SS

Width Radius Radius Width Radius

Sold in pairs (fasteners excluded)
Length = width + radius Length = width + 2 x radius CTSC25HDGPR
Not available in pre galvanised

Equal tee Unequal tee

Width Width 1 Medium duty wrap over couplers

Length 1 = Length 1 = Only required for straight tray to straight tray connection – medium duty range
Width + radius width 1 + radius
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Radius Radius
Sold in pairs (fasteners excluded)
Ra
Ra

CTC25PGPR
di
di

us
us

Radius Width Radius Radius Width 2 Radius

Length 2 = width + 2 x radius Length 2 = width 2 + 2 x radius

Heavy duty straight couplers
Only required for straight tray to straight tray connection – heavy duty range
90º riser Straight or right / left hand reducer Finish: post galvanised = HDG, stainless steel grade 316 = SS

Sold in pairs (fasteners excluded)

CTSC50HDGPR
25 Radius Not available in pre galvanised
0m Width 1
m width 2

Radius

100
Heavy duty wrap over couplers
Only required for straight tray to straight tray connection – heavy duty range
Radius
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

m
0m Sold in pairs (fasteners excluded)
25
Width 1 Width 2 CTC50PGPR
Radius

100

Footprints are identical for all ranges

39
88
 Cable tray systems Cable tray systems

Cable tray systems

Product footprint Straight length
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Cable tray — accessory foot print Width Light duty Medium duty Heavy duty
Standard radius is 125mm mm
50 CTSL12/0050PG3 CTSL25/0050PG3 N/A
90º flat bend Crossover 75 CTSL12/0075PG3 CTSL25/0075PG3 CTSL50/0075PG3
100 CTSL12/0100PG3 CTSL25/0100PG3 CTSL50/0100PG3
150 CTSL12/0150PG3 CTSL25/0150PG3 CTSL50/0150PG3
225 CTSL12/0225PG3 CTSL25/0225PG3 CTSL50/0225PG3
300 CTSL18/0300PG3 CTSL25/0300PG3 CTSL50/0300PG3
450 N/A CTSL25/0450PG3 CTSL50/0450PG3
Radius
600 N/A CTSL25/0600PG3 CTSL50/0600PG3
Width
750 N/A N/A CTSL50/0750PG3
Length = width
+ radius Width Length = width 900 N/A N/A CTSL50/0900PG3
+ 2 x radius

Radius
Radius
Medium duty straight couplers
Ra

Ra
di

di
Only required for straight tray to straight tray connection – medium duty range
us

us
Finish: post galvanised = HDG, stainless steel grade 316 = SS

Width Radius Radius Width Radius

Sold in pairs (fasteners excluded)
Length = width + radius Length = width + 2 x radius CTSC25HDGPR
Not available in pre galvanised

Equal tee Unequal tee

Width Width 1 Medium duty wrap over couplers

Length 1 = Length 1 = Only required for straight tray to straight tray connection – medium duty range
Width + radius width 1 + radius
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Radius Radius
Sold in pairs (fasteners excluded)
Ra
Ra

CTC25PGPR
di
di

us
us

Radius Width Radius Radius Width 2 Radius

Length 2 = width + 2 x radius Length 2 = width 2 + 2 x radius

Heavy duty straight couplers
Only required for straight tray to straight tray connection – heavy duty range
90º riser Straight or right / left hand reducer Finish: post galvanised = HDG, stainless steel grade 316 = SS

Sold in pairs (fasteners excluded)

CTSC50HDGPR
25 Radius Not available in pre galvanised
0m Width 1
m width 2

Radius

100
Heavy duty wrap over couplers
Only required for straight tray to straight tray connection – heavy duty range
Radius
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

m
0m Sold in pairs (fasteners excluded)
25
Width 1 Width 2 CTC50PGPR
Radius

100

Footprints are identical for all ranges

38
89
Cable tray systems Cable tray systems

Cable tray systems

90º flat bends Unequal tee (made to order)
W1
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width Light duty Medium duty Heavy duty How to generate the part number - CTUT (depth)/W1/W2(finish)
mm Example - CTUT 25/0300/0150/PG
50 CTFB12/0050PG90 CTFB25/0050PG90 N/A Table below shows a complete list of W1 and W2 combinations.
75 CTFB12/0075PG90 CTFB25/0075PG90 CTFB50/0075PG90 W1 W2 W1 W2 W1 W2 W1 W2
W2
100 CTFB12/0100PG90 CTFB25/0100PG90 CTFB50/0100PG90 50 75 100 450 300 75 600 450

150 CTFB12/0150PG90 CTFB25/0150PG90 CTFB50/0150PG90 50 100 100 600 300 100 600 750

225 CTFB12/0225PG90 CTFB25/0225PG90 CTFB50/0225PG90 50 150 100 750 300 150 600 900

300 CTFB18/0300PG90 CTFB25/0300PG90 CTFB50/0300PG90 50 225 100 900 300 225 750 50

450 N/A CTFB25/0450PG90 CTFB50/0450PG90 50 300 150 50 300 450 750 75

600 N/A CTFB25/0600PG90 CTFB50/0600PG90 50 450 150 75 300 600 750 100

750 N/A N/A CTFB50/0750PG90 50 600 150 100 300 750 750 150

900 N/A N/A CTFB50/0900PG90 50 750 150 225 300 900 750 225
50 900 150 300 450 50 750 300
75 50 150 450 450 75 750 450
75 100 150 600 450 100 750 600
45º flat bends 75 150 150 750 450 150 750 900
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS 75 225 150 900 450 225 900 50
75 300 225 50 450 300 900 75
Width Light duty Medium duty Heavy duty 75 450 225 75 450 600 900 100
mm
75 600 225 100 450 750 900 150
50 CTFB12/0050PG45 CTFB25/0050PG45 N/A
75 750 225 150 450 900 900 225
75 CTFB12/0075PG45 CTFB25/0075PG45 CTFB50/0075PG45
75 900 225 300 600 50 900 300
100 CTFB12/0100PG45 CTFB25/0100PG45 CTFB50/0100PG45
100 50 225 450 600 75 900 450
150 CTFB12/0150PG45 CTFB25/0150PG45 CTFB50/0150PG45
100 75 225 600 600 100 900 600
225 CTFB12/0225PG45 CTFB25/0225PG45 CTFB50/0225PG45
100 150 225 750 600 150 900 750
300 CTFB18/0300PG45 CTFB25/0300PG45 CTFB50/0300PG45
100 225 225 900 600 225
450 N/A CTFB25/0450PG45 CTFB50/0450PG45
100 300 300 50 600 300
600 N/A CTFB25/0600PG45 CTFB50/0600PG45
750 N/A N/A CTFB50/0750PG45
900 N/A N/A CTFB50/0900PG45

Adjustable flat bends

(Not available for light duty cable tray)
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width Medium duty Heavy duty

mm
50 CTAB25/0050PG N/A
75 CTAB25/0075PG CTAB50/0075PG
100 CTAB25/0100PG CTAB50/0100PG
150 CTAB25/0150PG CTAB50/0150PG
225 CTAB25/0225PG CTAB50/0225PG
300 CTAB25/0300PG CTAB50/0300PG

Equal tee
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width Light duty Medium duty Heavy duty

mm
50 CTET12/0050PG CTET25/0050PG N/A
75 CTET12/0075PG CTET25/0075PG CTET50/0075PG
100 CTET12/0100PG CTET25/0100PG CTET50/0100PG
150 CTET12/0150PG CTET25/0150PG CTET50/0150PG
225 CTET12/0225PG CTET25/0225PG CTET50/0225PG
300 CTET18/0300PG CTET25/0300PG CTET50/0300PG
450 N/A CTET25/0450PG CTET50/0450PG
600 N/A CTET25/0600PG CTET50/0600PG
750 N/A N/A CTET50/0750PG
900 N/A N/A CTET50/0900PG

41
90
 Cable tray systems Cable tray systems

Cable tray systems

90º flat bends Unequal tee (made to order)
W1
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width Light duty Medium duty Heavy duty How to generate the part number - CTUT (depth)/W1/W2(finish)
mm Example - CTUT 25/0300/0150/PG
50 CTFB12/0050PG90 CTFB25/0050PG90 N/A Table below shows a complete list of W1 and W2 combinations.
75 CTFB12/0075PG90 CTFB25/0075PG90 CTFB50/0075PG90 W1 W2 W1 W2 W1 W2 W1 W2
W2
100 CTFB12/0100PG90 CTFB25/0100PG90 CTFB50/0100PG90 50 75 100 450 300 75 600 450

150 CTFB12/0150PG90 CTFB25/0150PG90 CTFB50/0150PG90 50 100 100 600 300 100 600 750

225 CTFB12/0225PG90 CTFB25/0225PG90 CTFB50/0225PG90 50 150 100 750 300 150 600 900

300 CTFB18/0300PG90 CTFB25/0300PG90 CTFB50/0300PG90 50 225 100 900 300 225 750 50

450 N/A CTFB25/0450PG90 CTFB50/0450PG90 50 300 150 50 300 450 750 75

600 N/A CTFB25/0600PG90 CTFB50/0600PG90 50 450 150 75 300 600 750 100

750 N/A N/A CTFB50/0750PG90 50 600 150 100 300 750 750 150

900 N/A N/A CTFB50/0900PG90 50 750 150 225 300 900 750 225
50 900 150 300 450 50 750 300
75 50 150 450 450 75 750 450
75 100 150 600 450 100 750 600
45º flat bends 75 150 150 750 450 150 750 900
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS 75 225 150 900 450 225 900 50
75 300 225 50 450 300 900 75
Width Light duty Medium duty Heavy duty 75 450 225 75 450 600 900 100
mm
75 600 225 100 450 750 900 150
50 CTFB12/0050PG45 CTFB25/0050PG45 N/A
75 750 225 150 450 900 900 225
75 CTFB12/0075PG45 CTFB25/0075PG45 CTFB50/0075PG45
75 900 225 300 600 50 900 300
100 CTFB12/0100PG45 CTFB25/0100PG45 CTFB50/0100PG45
100 50 225 450 600 75 900 450
150 CTFB12/0150PG45 CTFB25/0150PG45 CTFB50/0150PG45
100 75 225 600 600 100 900 600
225 CTFB12/0225PG45 CTFB25/0225PG45 CTFB50/0225PG45
100 150 225 750 600 150 900 750
300 CTFB18/0300PG45 CTFB25/0300PG45 CTFB50/0300PG45
100 225 225 900 600 225
450 N/A CTFB25/0450PG45 CTFB50/0450PG45
100 300 300 50 600 300
600 N/A CTFB25/0600PG45 CTFB50/0600PG45
750 N/A N/A CTFB50/0750PG45
900 N/A N/A CTFB50/0900PG45

Adjustable flat bends

(Not available for light duty cable tray)
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width Medium duty Heavy duty

mm
50 CTAB25/0050PG N/A
75 CTAB25/0075PG CTAB50/0075PG
100 CTAB25/0100PG CTAB50/0100PG
150 CTAB25/0150PG CTAB50/0150PG
225 CTAB25/0225PG CTAB50/0225PG
300 CTAB25/0300PG CTAB50/0300PG

Equal tee
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width Light duty Medium duty Heavy duty

mm
50 CTET12/0050PG CTET25/0050PG N/A
75 CTET12/0075PG CTET25/0075PG CTET50/0075PG
100 CTET12/0100PG CTET25/0100PG CTET50/0100PG
150 CTET12/0150PG CTET25/0150PG CTET50/0150PG
225 CTET12/0225PG CTET25/0225PG CTET50/0225PG
300 CTET18/0300PG CTET25/0300PG CTET50/0300PG
450 N/A CTET25/0450PG CTET50/0450PG
600 N/A CTET25/0600PG CTET50/0600PG
750 N/A N/A CTET50/0750PG
900 N/A N/A CTET50/0900PG

40
91
Cable tray systems Cable tray systems

Cable tray systems

Crossovers Reducers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
W1

Width Light duty Medium duty Heavy duty Width Light duty Medium duty Heavy duty
mm mm
W1 W2
50 CTCO12/0050PG CTCO25/0050PG N/A W2
75 50 CTSR12/0075/0050PG CTSR25/0075/0050PG N/A
75 CTCO12/0075PG CTCO25/0075PG CTCO50/0075PG
100 50 CTSR12/0100/0050PG CTSR25/0100/0050PG N/A
100 CTCO12/0100PG CTCO25/0100PG CTCO50/0100PG
150 50 CTSR12/0150/0050PG CTSR25/0150/0050PG N/A
150 CTCO12/0150PG CTCO25/0150PG CTCO50/0150PG
225 50 CTSR12/0225/0050PG CTSR25/0225/0050PG N/A
225 CTCO12/0225PG CTCO25/0225PG CTCO50/0225PG
300 50 CTSR18/0300/0050PG CTSR25/0300/0050PG N/A
300 CTCO18/0300PG CTCO25/0300PG CTCO50/0300PG
450 50 N/A CTSR25/0450/0050PG N/A
450 N/A CTCO25/0450PG CTCO50/0450PG
600 50 N/A CTSR25/0600/0050PG N/A
600 N/A CTCO25/0600PG CTCO50/0600PG
750 50 N/A N/A N/A
750 N/A N/A CTCO50/0750PG
900 50 N/A N/A N/A
900 N/A N/A CTCO50/0900PG
100 75 CTSR12/0100/0075PG CTSR25/0100/0075PG CTSR50/0100/0075PG
150 75 CTSR12/0150/0075PG CTSR25/0150/0075PG CTSR50/0150/0075PG
225 75 CTSR12/0225/0075PG CTSR25/0225/0075PG CTSR50/0225/0075PG
Internal riser - flexible 300 75 CTSR18/0300/0075PG CTSR25/0300/0075PG CTSR50/0300/0075PG
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS 450 75 N/A CTSR25/0450/0075PG CTSR50/0450/0075PG
CTFR = Flexible risers are supplied flat and folded on site to suit angle. 600 75 N/A CTSR25/0600/0075PG CTSR50/0600/0075PG
CTIR = Internal risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30° 750 75 N/A N/A CTSR50/0750/0075PG
Eg: CTIR50/0900PG90
900 75 N/A N/A CTSR50/0900/0075PG
150 100 CTSR12/0150/0100PG CTSR25/0150/0100PG CTSR50/0150/0100PG
Width Light duty Medium duty Heavy duty
mm 225 100 CTSR12/0225/0100PG CTSR25/0225/0100PG CTSR50/0225/0100PG

50 CTFR12/0050PG CTFR25/0050PG N/A 300 100 CTSR18/0300/0100PG CTSR25/0300/0100PG CTSR50/0300/0100PG

75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG 450 100 N/A CTSR25/0450/0100PG CTSR50/0450/0100PG

100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG 600 100 N/A CTSR25/0600/0100PG CTSR50/0600/0100PG

150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG 750 100 N/A N/A CTSR50/0750/0100PG

225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG 900 100 N/A N/A CTSR50/0900/0100PG

300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG 225 150 CTSR12/0225/0150PG CTSR25/0225/0150PG CTSR50/0225/0150PG

450 N/A CTFR25/0450PG CTFR50/0450PG 300 150 CTSR18/0300/0150PG CTSR25/0300/0150PG CTSR50/0300/0150PG

600 N/A CTFR25/0600PG CTFR50/0600PG 450 150 N/A CTSR25/0450/0150PG CTSR50/0450/0150PG

750 N/A N/A CTIR50/0750PG90 (only available pre-folded) 600 150 N/A CTSR25/0600/0150PG CTSR50/0600/0150PG

900 N/A N/A CTIR50/0900PG90 (only available pre-folded) 750 150 N/A N/A CTSR50/0750/0150PG
900 150 N/A N/A CTSR50/0900/0150PG
300 225 CTSR18/0300/0225PG CTSR25/0300/0225PG CTSR50/0300/0225PG
450 225 N/A CTSR25/0450/0225PG CTSR50/0450/0225PG
External riser - flexible 600 225 N/A CTSR25/0600/0225PG CTSR50/0600/0225PG
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS 750 225 N/A N/A CTSR50/0750/0225PG
CTFR = Flexible risers are supplied flat and folded on site to suit angle.
900 225 N/A N/A CTSR50/0900/0225PG
CTER = External risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30°
450 300 N/A CTSR25/0450/0300PG CTSR50/0450/0300PG
Eg: CTER50/0900PG90
600 300 N/A CTSR25/0600/0300PG CTSR50/0600/0300PG

Width Light duty Medium duty Heavy duty 750 300 N/A N/A CTSR50/0750/0300PG
mm 900 300 N/A N/A CTSR50/0900/0300PG
50 CTFR12/0050PG CTFR25/0050PG N/A 600 450 N/A CTSR25/0600/0450PG CTSR50/0600/0450PG
75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG 750 450 N/A N/A CTSR50/0750/0450PG
100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG 900 450 N/A N/A CTSR50/0900/0450PG
150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG 750 600 N/A N/A CTSR50/0750/0600PG
225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG 900 600 N/A N/A CTSR50/0900/0600PG
300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG 900 750 N/A N/A CTSR50/0900/0750PG
450 N/A CTFR25/0450PG CTFR50/0450PG
600 N/A CTFR25/0600PG CTFR50/0600PG
750 N/A N/A CTER50/0750PG90 (only available pre-folded)
900 N/A N/A CTER50/0900PG90 (only available pre-folded)

43
92
 Cable tray systems Cable tray systems

Cable tray systems

Crossovers Reducers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
W1

Width Light duty Medium duty Heavy duty Width Light duty Medium duty Heavy duty
mm mm
W1 W2
50 CTCO12/0050PG CTCO25/0050PG N/A W2
75 50 CTSR12/0075/0050PG CTSR25/0075/0050PG N/A
75 CTCO12/0075PG CTCO25/0075PG CTCO50/0075PG
100 50 CTSR12/0100/0050PG CTSR25/0100/0050PG N/A
100 CTCO12/0100PG CTCO25/0100PG CTCO50/0100PG
150 50 CTSR12/0150/0050PG CTSR25/0150/0050PG N/A
150 CTCO12/0150PG CTCO25/0150PG CTCO50/0150PG
225 50 CTSR12/0225/0050PG CTSR25/0225/0050PG N/A
225 CTCO12/0225PG CTCO25/0225PG CTCO50/0225PG
300 50 CTSR18/0300/0050PG CTSR25/0300/0050PG N/A
300 CTCO18/0300PG CTCO25/0300PG CTCO50/0300PG
450 50 N/A CTSR25/0450/0050PG N/A
450 N/A CTCO25/0450PG CTCO50/0450PG
600 50 N/A CTSR25/0600/0050PG N/A
600 N/A CTCO25/0600PG CTCO50/0600PG
750 50 N/A N/A N/A
750 N/A N/A CTCO50/0750PG
900 50 N/A N/A N/A
900 N/A N/A CTCO50/0900PG
100 75 CTSR12/0100/0075PG CTSR25/0100/0075PG CTSR50/0100/0075PG
150 75 CTSR12/0150/0075PG CTSR25/0150/0075PG CTSR50/0150/0075PG
225 75 CTSR12/0225/0075PG CTSR25/0225/0075PG CTSR50/0225/0075PG
Internal riser - flexible 300 75 CTSR18/0300/0075PG CTSR25/0300/0075PG CTSR50/0300/0075PG
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS 450 75 N/A CTSR25/0450/0075PG CTSR50/0450/0075PG
CTFR = Flexible risers are supplied flat and folded on site to suit angle. 600 75 N/A CTSR25/0600/0075PG CTSR50/0600/0075PG
CTIR = Internal risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30° 750 75 N/A N/A CTSR50/0750/0075PG
Eg: CTIR50/0900PG90
900 75 N/A N/A CTSR50/0900/0075PG
150 100 CTSR12/0150/0100PG CTSR25/0150/0100PG CTSR50/0150/0100PG
Width Light duty Medium duty Heavy duty
mm 225 100 CTSR12/0225/0100PG CTSR25/0225/0100PG CTSR50/0225/0100PG

50 CTFR12/0050PG CTFR25/0050PG N/A 300 100 CTSR18/0300/0100PG CTSR25/0300/0100PG CTSR50/0300/0100PG

75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG 450 100 N/A CTSR25/0450/0100PG CTSR50/0450/0100PG

100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG 600 100 N/A CTSR25/0600/0100PG CTSR50/0600/0100PG

150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG 750 100 N/A N/A CTSR50/0750/0100PG

225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG 900 100 N/A N/A CTSR50/0900/0100PG

300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG 225 150 CTSR12/0225/0150PG CTSR25/0225/0150PG CTSR50/0225/0150PG

450 N/A CTFR25/0450PG CTFR50/0450PG 300 150 CTSR18/0300/0150PG CTSR25/0300/0150PG CTSR50/0300/0150PG

600 N/A CTFR25/0600PG CTFR50/0600PG 450 150 N/A CTSR25/0450/0150PG CTSR50/0450/0150PG

750 N/A N/A CTIR50/0750PG90 (only available pre-folded) 600 150 N/A CTSR25/0600/0150PG CTSR50/0600/0150PG

900 N/A N/A CTIR50/0900PG90 (only available pre-folded) 750 150 N/A N/A CTSR50/0750/0150PG
900 150 N/A N/A CTSR50/0900/0150PG
300 225 CTSR18/0300/0225PG CTSR25/0300/0225PG CTSR50/0300/0225PG
450 225 N/A CTSR25/0450/0225PG CTSR50/0450/0225PG
External riser - flexible 600 225 N/A CTSR25/0600/0225PG CTSR50/0600/0225PG
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS 750 225 N/A N/A CTSR50/0750/0225PG
CTFR = Flexible risers are supplied flat and folded on site to suit angle.
900 225 N/A N/A CTSR50/0900/0225PG
CTER = External risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30°
450 300 N/A CTSR25/0450/0300PG CTSR50/0450/0300PG
Eg: CTER50/0900PG90
600 300 N/A CTSR25/0600/0300PG CTSR50/0600/0300PG

Width Light duty Medium duty Heavy duty 750 300 N/A N/A CTSR50/0750/0300PG
mm 900 300 N/A N/A CTSR50/0900/0300PG
50 CTFR12/0050PG CTFR25/0050PG N/A 600 450 N/A CTSR25/0600/0450PG CTSR50/0600/0450PG
75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG 750 450 N/A N/A CTSR50/0750/0450PG
100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG 900 450 N/A N/A CTSR50/0900/0450PG
150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG 750 600 N/A N/A CTSR50/0750/0600PG
225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG 900 600 N/A N/A CTSR50/0900/0600PG
300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG 900 750 N/A N/A CTSR50/0900/0750PG
450 N/A CTFR25/0450PG CTFR50/0450PG
600 N/A CTFR25/0600PG CTFR50/0600PG
750 N/A N/A CTER50/0750PG90 (only available pre-folded)
900 N/A N/A CTER50/0900PG90 (only available pre-folded)

42
93
Cable tray systems Cable tray systems

Cable tray systems

Fishplate couplers Cover - 45º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Width Includes 5 fixing clamps and fasteners
mm (always required for cut lengths of light duty tray)
50 CTFP1PG Width Light duty Medium duty Heavy duty
75 CTFP1PG
100 CTFP1PG 50 CTFB12CV/050PG45 CTFB25CC/050PG45 N/A
150 CTFP1PG 75 CTFB12CV/075PG45 CTFB25CC/075PG45 CTFB50CC/075PG45
225 CTFP2PG 100 CTFB12CV/100PG45 CTFB25CC/100PG45 CTFB50CC/100PG45
300 CTFP2PG 150 CTFB12CV/150PG45 CTFB25CC/150PG45 CTFB50CC/150PG45
450 CTFP2PG 225 CTFB12CV/225PG45 CTFB25CC/225PG45 CTFB50CC/225PG45
600 CTFP2PG 300 CTFB18CV/300PG45 CTFB25CC/300PG45 CTFB50CC/300PG45
750 CTFP2PG 450 N/A CTFB25CC/450PG45 CTFB50CC/450PG45
900 CTFP2PG 600 N/A CTFB25CC/600PG45 CTFB50CC/600PG45
750 N/A N/A CTFB50CC/750PG45
900 N/A N/A CTFB50CC/900PG45
Cover - straight length - 3m long *NB. Closed cover not available for 12mm and 18mm deep cable tray.

Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV Cover - equal tee
Includes 6 fixing clamps and fasteners Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Includes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty

50 CTSL12CV/050PG CTSL25CC/050PG N/A Width Light duty Medium duty Heavy duty
75 CTSL12CV/075PG CTSL25CC/075PG CTSL50CC/075PG
100 CTSL12CV/100PG CTSL25CC/100PG CTSL50CC/100PG 50 CTET12CV/050PG CTET25CC/050PG N/A
150 CTSL12CV/150PG CTSL25CC/150PG CTSL50CC/150PG 75 CTET12CV/075PG CTET25CC/075PG CTET50CC/075PG
225 CTSL12CV/225PG CTSL25CC/225PG CTSL50CC/225PG 100 CTET12CV/100PG CTET25CC/100PG CTET50CC/100PG
300 CTSL18CV/300PG CTSL25CC/300PG CTSL50CC/300PG 150 CTET12CV/150PG CTET25CC/150PG CTET50CC/150PG
450 N/A CTSL25CC/450PG CTSL50CC/450PG 225 CTET12CV/225PG CTET25CC/225PG CTET50CC/225PG
600 N/A CTSL25CC/600PG CTSL50CC/600PG 300 CTET18CV/300PG CTET25CC/300PG CTET50CC/300PG
750 N/A N/A CTSL50CC/750PG 450 N/A CTET25CC/450PG CTET50CC/450PG
900 N/A N/A CTSL50CC/900PG 600 N/A CTET25CC/600PG CTET50CC/600PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray. 750 N/A N/A CTET50CC/750PG
900 N/A N/A CTET50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Extra cover clips
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Cover - crossover
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Duty Standard Ventilated Standard closed covers = CC, ventilated cover = CV
Includes 4 fixing clamps and fasteners
Light N/A CTCCV18HDG
Medium CTCCC25HDG CTCCV25HDG Width Light duty Medium duty Heavy duty
Heavy CTCCC50HDG CTCCV50HDG
50 CTCO12CV/050PG CTCO25CC/050PG N/A
75 CTCO12CV/075PG CTCO25CC/075PG CTCO50CC/075PG

Cover - 90º flat bends 100 CTCO12CV/100PG CTCO25CC/100PG CTCO50CC/100PG

150 CTCO12CV/150PG CTCO25CC/150PG CTCO50CC/150PG
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
225 CTCO12CV/225PG CTCO25CC/225PG CTCO50CC/225PG
Standard closed covers = CC, ventilated cover = CV
Includes 5 fixing clamps and fasteners 300 CTCO18CV/300PG CTCO25CC/300PG CTCO50CC/300PG
450 N/A CTCO25CC/450PG CTCO50CC/450PG
600 N/A CTCO25CC/600PG CTCO50CC/600PG
Width Light duty Medium duty Heavy duty
750 N/A N/A CTCO50CC/750PG
50 CTFB12CV/050PG90 CTFB25CC/050PG90 N/A 900 N/A N/A CTCO50CC/900PG
75 CTFB12CV/075PG90 CTFB25CC/075PG90 CTFB50CC/075PG90 *NB. Closed cover not available for 12mm and 18mm deep cable tray.

100 CTFB12CV/100PG90 CTFB25CC/100PG90 CTFB50CC/100PG90

150 CTFB12CV/150PG90 CTFB25CC/150PG90 CTFB50CC/150PG90
225 CTFB12CV/225PG90 CTFB25CC/225PG90 CTFB50CC/225PG90
300 CTFB18CV/300PG90 CTFB25CC/300PG90 CTFB50CC/300PG90
450 N/A CTFB25CC/450PG90 CTFB50CC/450PG90
600 N/A CTFB25CC/600PG90 CTFB50CC/600PG90
750 N/A N/A CTFB50CC/750PG90
900 N/A N/A CTFB50CC/900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.

45
94
 Cable tray systems Cable tray systems

Cable tray systems

Fishplate couplers Cover - 45º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Width Includes 5 fixing clamps and fasteners
mm (always required for cut lengths of light duty tray)
50 CTFP1PG Width Light duty Medium duty Heavy duty
75 CTFP1PG
100 CTFP1PG 50 CTFB12CV/050PG45 CTFB25CC/050PG45 N/A
150 CTFP1PG 75 CTFB12CV/075PG45 CTFB25CC/075PG45 CTFB50CC/075PG45
225 CTFP2PG 100 CTFB12CV/100PG45 CTFB25CC/100PG45 CTFB50CC/100PG45
300 CTFP2PG 150 CTFB12CV/150PG45 CTFB25CC/150PG45 CTFB50CC/150PG45
450 CTFP2PG 225 CTFB12CV/225PG45 CTFB25CC/225PG45 CTFB50CC/225PG45
600 CTFP2PG 300 CTFB18CV/300PG45 CTFB25CC/300PG45 CTFB50CC/300PG45
750 CTFP2PG 450 N/A CTFB25CC/450PG45 CTFB50CC/450PG45
900 CTFP2PG 600 N/A CTFB25CC/600PG45 CTFB50CC/600PG45
750 N/A N/A CTFB50CC/750PG45
900 N/A N/A CTFB50CC/900PG45
Cover - straight length - 3m long *NB. Closed cover not available for 12mm and 18mm deep cable tray.

Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV Cover - equal tee
Includes 6 fixing clamps and fasteners Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Includes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty

50 CTSL12CV/050PG CTSL25CC/050PG N/A Width Light duty Medium duty Heavy duty
75 CTSL12CV/075PG CTSL25CC/075PG CTSL50CC/075PG
100 CTSL12CV/100PG CTSL25CC/100PG CTSL50CC/100PG 50 CTET12CV/050PG CTET25CC/050PG N/A
150 CTSL12CV/150PG CTSL25CC/150PG CTSL50CC/150PG 75 CTET12CV/075PG CTET25CC/075PG CTET50CC/075PG
225 CTSL12CV/225PG CTSL25CC/225PG CTSL50CC/225PG 100 CTET12CV/100PG CTET25CC/100PG CTET50CC/100PG
300 CTSL18CV/300PG CTSL25CC/300PG CTSL50CC/300PG 150 CTET12CV/150PG CTET25CC/150PG CTET50CC/150PG
450 N/A CTSL25CC/450PG CTSL50CC/450PG 225 CTET12CV/225PG CTET25CC/225PG CTET50CC/225PG
600 N/A CTSL25CC/600PG CTSL50CC/600PG 300 CTET18CV/300PG CTET25CC/300PG CTET50CC/300PG
750 N/A N/A CTSL50CC/750PG 450 N/A CTET25CC/450PG CTET50CC/450PG
900 N/A N/A CTSL50CC/900PG 600 N/A CTET25CC/600PG CTET50CC/600PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray. 750 N/A N/A CTET50CC/750PG
900 N/A N/A CTET50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Extra cover clips
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Cover - crossover
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Duty Standard Ventilated Standard closed covers = CC, ventilated cover = CV
Includes 4 fixing clamps and fasteners
Light N/A CTCCV18HDG
Medium CTCCC25HDG CTCCV25HDG Width Light duty Medium duty Heavy duty
Heavy CTCCC50HDG CTCCV50HDG
50 CTCO12CV/050PG CTCO25CC/050PG N/A
75 CTCO12CV/075PG CTCO25CC/075PG CTCO50CC/075PG

Cover - 90º flat bends 100 CTCO12CV/100PG CTCO25CC/100PG CTCO50CC/100PG

150 CTCO12CV/150PG CTCO25CC/150PG CTCO50CC/150PG
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
225 CTCO12CV/225PG CTCO25CC/225PG CTCO50CC/225PG
Standard closed covers = CC, ventilated cover = CV
Includes 5 fixing clamps and fasteners 300 CTCO18CV/300PG CTCO25CC/300PG CTCO50CC/300PG
450 N/A CTCO25CC/450PG CTCO50CC/450PG
600 N/A CTCO25CC/600PG CTCO50CC/600PG
Width Light duty Medium duty Heavy duty
750 N/A N/A CTCO50CC/750PG
50 CTFB12CV/050PG90 CTFB25CC/050PG90 N/A 900 N/A N/A CTCO50CC/900PG
75 CTFB12CV/075PG90 CTFB25CC/075PG90 CTFB50CC/075PG90 *NB. Closed cover not available for 12mm and 18mm deep cable tray.

100 CTFB12CV/100PG90 CTFB25CC/100PG90 CTFB50CC/100PG90

150 CTFB12CV/150PG90 CTFB25CC/150PG90 CTFB50CC/150PG90
225 CTFB12CV/225PG90 CTFB25CC/225PG90 CTFB50CC/225PG90
300 CTFB18CV/300PG90 CTFB25CC/300PG90 CTFB50CC/300PG90
450 N/A CTFB25CC/450PG90 CTFB50CC/450PG90
600 N/A CTFB25CC/600PG90 CTFB50CC/600PG90
750 N/A N/A CTFB50CC/750PG90
900 N/A N/A CTFB50CC/900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.

44
95
Cable tray systems Cable tray systems

Cable tray systems

Cover - unequal tee (made to order) Cover - reducer
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS W1
Standard closed covers = CC, ventilated cover = CV Standard closed covers = CC, ventilated cover = CV
Includes 5 fixing clamps and fasteners Includes 4 fixing clamps and fasteners

How to generate the part number - CTUT (cover type) (depth)/W1/W2(finish)

Width Light duty Medium duty Heavy duty
Example - CTUT CC 25/300/150PG W2
mm
Table below shows a complete list of W1 and W2 combinations. W1 W2
W1 W2 W1 W2 W1 W2 W1 W2 W1 75 50 CTSRCV12/0075/0050PG CTSRCC25/0075/0050PG N/A
50 75 100 450 300 75 600 450 W2
100 50 CTSRCV12/0100/0050PG CTSRCC25/0100/0050PG N/A
50 100 100 600 300 100 600 750
150 50 CTSRCV12/0150/0050PG CTSRCC25/0150/0050PG N/A
50 150 100 750 300 150 600 900
225 50 CTSRCV12/0225/0050PG CTSRCC25/0225/0050PG N/A
50 225 100 900 300 225 750 50
300 50 N/A CTSRCC25/0300/0050PG N/A
50 300 150 50 300 450 750 75
450 50 N/A CTSRCC25/0450/0050PG N/A
50 450 150 75 300 600 750 100
600 50 N/A CTSRCC25/0600/0050PG N/A
50 600 150 100 300 750 750 150
750 50 N/A N/A N/A
50 750 150 225 300 900 750 225
900 50 N/A N/A N/A
50 900 150 300 450 50 750 300
100 75 CTSRCV12/0100/0075PG CTSRCC25/0100/0075PG CTSRCC50/0100/0075PG
75 50 150 450 450 75 750 450
150 75 CTSRCV12/0150/0075PG CTSRCC25/0150/0075PG CTSRCC50/0150/0075PG
75 100 150 600 450 100 750 600
225 75 CTSRCV12/0225/0075PG CTSRCC25/0225/0075PG CTSRCC50/0225/0075PG
75 150 150 750 450 150 750 900
300 75 CTSRCV18/0300/0075PG CTSRCC25/0300/0075PG CTSRCC50/0300/0075PG
75 225 150 900 450 225 900 50
450 75 N/A CTSRCC25/0450/0075PG CTSRCC50/0450/0075PG
75 300 225 50 450 300 900 75
600 75 N/A CTSRCC25/0600/0075PG CTSRCC50/0600/0075PG
75 450 225 75 450 600 900 100
750 75 N/A N/A CTSRCC50/0750/0075PG
75 600 225 100 450 750 900 150
900 75 N/A N/A CTSRCC50/0900/0075PG
75 750 225 150 450 900 900 225
150 100 CTSRCV12/0150/0100PG CTSRCC25/0150/0100PG CTSRCC50/0150/0100PG
75 900 225 300 600 50 900 300
225 100 CTSRCV12/0225/0100PG CTSRCC25/0225/0100PG CTSRCC50/0225/0100PG
100 50 225 450 600 75 900 450
300 100 CTSRCV18/0300/0100PG CTSRCC25/0300/0100PG CTSRCC50/0300/0100PG
100 75 225 600 600 100 900 600
450 100 N/A CTSRCC25/0450/0100PG CTSRCC50/0450/0100PG
100 150 225 750 600 150 900 750
600 100 N/A CTSRCC25/0600/0100PG CTSRCC50/0600/0100PG
100 225 225 900 600 225
750 100 N/A N/A CTSRCC50/0750/0100PG
100 300 300 50 600 300
900 100 N/A N/A CTSRCC50/0900/0100PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray. 225 150 CTSRCV12/0225/0150PG CTSRCC25/0225/0150PG CTSRCC50/0225/0150PG
300 150 CTSRCV18/0300/0150PG CTSRCC25/0300/0150PG CTSRCC50/0300/0150PG
450 150 N/A CTSRCC25/0450/0150PG CTSRCC50/0450/0150PG
600 150 N/A CTSRCC25/0600/0150PG CTSRCC50/0600/0150PG
750 150 N/A N/A CTSRCC50/0750/0150PG
900 150 N/A N/A CTSRCC50/0900/0150PG
300 225 CTSRCV18/0300/0225PG CTSRCC25/0300/0225PG CTSRCC50/0300/0225PG
450 225 N/A CTSRCC25/0450/0225PG CTSRCC50/0450/0225PG
600 225 N/A CTSRCC25/0600/0225PG CTSRCC50/0600/0225PG
750 225 N/A N/A CTSRCC50/0750/0225PG
900 225 N/A N/A CTSRCC50/0900/0225PG
450 300 N/A CTSRCC25/0450/0300PG CTSRCC50/0450/0300PG
600 300 N/A CTSRCC25/0600/0300PG CTSRCC50/0600/0300PG
750 300 N/A N/A CTSRCC50/0750/0300PG
900 300 N/A N/A CTSRCC50/0900/0300PG
600 450 N/A CTSRCC25/0600/0450PG CTSRCC50/0600/0450PG
750 450 N/A N/A CTSRCC50/0750/0450PG
900 450 N/A N/A CTSRCC50/0900/0450PG
750 600 N/A N/A CTSRCC50/0750/0600PG
900 600 N/A N/A CTSRCC50/0900/0600PG
900 750 N/A N/A CTSRCC50/0900/0750PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.

47
96
 Cable tray systems Cable tray systems

Cable tray systems

Cover - unequal tee (made to order) Cover - reducer
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS W1
Standard closed covers = CC, ventilated cover = CV Standard closed covers = CC, ventilated cover = CV
Includes 5 fixing clamps and fasteners Includes 4 fixing clamps and fasteners

How to generate the part number - CTUT (cover type) (depth)/W1/W2(finish)

Width Light duty Medium duty Heavy duty
Example - CTUT CC 25/300/150PG W2
mm
Table below shows a complete list of W1 and W2 combinations. W1 W2
W1 W2 W1 W2 W1 W2 W1 W2 W1 75 50 CTSRCV12/0075/0050PG CTSRCC25/0075/0050PG N/A
50 75 100 450 300 75 600 450 W2
100 50 CTSRCV12/0100/0050PG CTSRCC25/0100/0050PG N/A
50 100 100 600 300 100 600 750
150 50 CTSRCV12/0150/0050PG CTSRCC25/0150/0050PG N/A
50 150 100 750 300 150 600 900
225 50 CTSRCV12/0225/0050PG CTSRCC25/0225/0050PG N/A
50 225 100 900 300 225 750 50
300 50 N/A CTSRCC25/0300/0050PG N/A
50 300 150 50 300 450 750 75
450 50 N/A CTSRCC25/0450/0050PG N/A
50 450 150 75 300 600 750 100
600 50 N/A CTSRCC25/0600/0050PG N/A
50 600 150 100 300 750 750 150
750 50 N/A N/A N/A
50 750 150 225 300 900 750 225
900 50 N/A N/A N/A
50 900 150 300 450 50 750 300
100 75 CTSRCV12/0100/0075PG CTSRCC25/0100/0075PG CTSRCC50/0100/0075PG
75 50 150 450 450 75 750 450
150 75 CTSRCV12/0150/0075PG CTSRCC25/0150/0075PG CTSRCC50/0150/0075PG
75 100 150 600 450 100 750 600
225 75 CTSRCV12/0225/0075PG CTSRCC25/0225/0075PG CTSRCC50/0225/0075PG
75 150 150 750 450 150 750 900
300 75 CTSRCV18/0300/0075PG CTSRCC25/0300/0075PG CTSRCC50/0300/0075PG
75 225 150 900 450 225 900 50
450 75 N/A CTSRCC25/0450/0075PG CTSRCC50/0450/0075PG
75 300 225 50 450 300 900 75
600 75 N/A CTSRCC25/0600/0075PG CTSRCC50/0600/0075PG
75 450 225 75 450 600 900 100
750 75 N/A N/A CTSRCC50/0750/0075PG
75 600 225 100 450 750 900 150
900 75 N/A N/A CTSRCC50/0900/0075PG
75 750 225 150 450 900 900 225
150 100 CTSRCV12/0150/0100PG CTSRCC25/0150/0100PG CTSRCC50/0150/0100PG
75 900 225 300 600 50 900 300
225 100 CTSRCV12/0225/0100PG CTSRCC25/0225/0100PG CTSRCC50/0225/0100PG
100 50 225 450 600 75 900 450
300 100 CTSRCV18/0300/0100PG CTSRCC25/0300/0100PG CTSRCC50/0300/0100PG
100 75 225 600 600 100 900 600
450 100 N/A CTSRCC25/0450/0100PG CTSRCC50/0450/0100PG
100 150 225 750 600 150 900 750
600 100 N/A CTSRCC25/0600/0100PG CTSRCC50/0600/0100PG
100 225 225 900 600 225
750 100 N/A N/A CTSRCC50/0750/0100PG
100 300 300 50 600 300
900 100 N/A N/A CTSRCC50/0900/0100PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray. 225 150 CTSRCV12/0225/0150PG CTSRCC25/0225/0150PG CTSRCC50/0225/0150PG
300 150 CTSRCV18/0300/0150PG CTSRCC25/0300/0150PG CTSRCC50/0300/0150PG
450 150 N/A CTSRCC25/0450/0150PG CTSRCC50/0450/0150PG
600 150 N/A CTSRCC25/0600/0150PG CTSRCC50/0600/0150PG
750 150 N/A N/A CTSRCC50/0750/0150PG
900 150 N/A N/A CTSRCC50/0900/0150PG
300 225 CTSRCV18/0300/0225PG CTSRCC25/0300/0225PG CTSRCC50/0300/0225PG
450 225 N/A CTSRCC25/0450/0225PG CTSRCC50/0450/0225PG
600 225 N/A CTSRCC25/0600/0225PG CTSRCC50/0600/0225PG
750 225 N/A N/A CTSRCC50/0750/0225PG
900 225 N/A N/A CTSRCC50/0900/0225PG
450 300 N/A CTSRCC25/0450/0300PG CTSRCC50/0450/0300PG
600 300 N/A CTSRCC25/0600/0300PG CTSRCC50/0600/0300PG
750 300 N/A N/A CTSRCC50/0750/0300PG
900 300 N/A N/A CTSRCC50/0900/0300PG
600 450 N/A CTSRCC25/0600/0450PG CTSRCC50/0600/0450PG
750 450 N/A N/A CTSRCC50/0750/0450PG
900 450 N/A N/A CTSRCC50/0900/0450PG
750 600 N/A N/A CTSRCC50/0750/0600PG
900 600 N/A N/A CTSRCC50/0900/0600PG
900 750 N/A N/A CTSRCC50/0900/0750PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.

46
97
Cable tray systems Cable tray systems

Cable tray systems

Cover - 90º internal riser Hanger brackets
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Includes 8 fixing clamps and fasteners
Width
mm
Width Light duty Medium duty Heavy duty
mm 50 CTHB050/PG

50 CTIR12CV/0050PG90 CTIR25CC/0050PG90 N/A 75 CTHB075/PG

75 CTIR12CV/0075PG90 CTIR25CC/0075PG90 CTIR50CC/0075PG90 100 CTHB100/PG

100 CTIR12CV/0100PG90 CTIR25CC/0100PG90 CTIR50CC/0100PG90 150 CTHB150/PG

150 CTIR12CV/0150PG90 CTIR25CC/0150PG90 CTIR50CC/0150PG90

225 CTIR12CV/0225PG90 CTIR25CC/0225PG90 CTIR50CC/0225PG90
300 CTIR18CV/0300PG90 CTIR25CC/0300PG90 CTIR50CC/0300PG90
450 N/A CTIR25CC/0450PG90 CTIR50CC/0450PG90
600 N/A CTIR25CC/0600PG90 CTIR50CC/0600PG90 Straight divider - 3m
750 N/A N/A CTIR50CC/0750PG90 Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
900 N/A N/A CTIR50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray. Tray depth
mm
Cover - 90º external riser 25 CTDI025PG3
50 CTDI050PG3
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Includes 8 fixing clamps and fasteners

Width Light duty Medium duty Heavy duty

mm
50 CTER12CV/0050PG90 CTER25CC/0050PG90 N/A
75 CTER12CV/0075PG90 CTER25CC/0075PG90 CTER50CC/0075PG90 Earthing straps
100 CTER12CV/0100PG90 CTER25CC/0100PG90 CTER50CC/0100PG90 Finish: electro-tinned
150 CTER12CV/0150PG90 CTER25CC/0150PG90 CTER50CC/0150PG90
225 CTER12CV/0225PG90 CTER25CC/0225PG90 CTER50CC/0225PG90 Use M6 x 12 roofing bolts Supplied in packs of 10
300 CTER18CV/0300PG90 CTER25CC/0300PG90 CTER50CC/0300PG90 CT/ES100
450 N/A CTER25CC/0450PG90 CTER50CC/0450PG90 Copper braid electro tinned 4mm2, 100mm long
600 N/A CTER25CC/0600PG90 CTER50CC/0600PG90
750 N/A N/A CTER50CC/0750PG90
900 N/A N/A CTER50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Roofing bolts and nuts
Stand off brackets
Finish: BZP as standard, stainless steel grade 316 = SS
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width M6 x 12 roofing bolts

mm Supplied in packs of 100
50 CTSO050PG M06X12RB
75 CTSO075PG
100 CTSO100PG
150 CTSO150PG
225 CTSO225PG
300 CTSO300PG
450 CTSO450PG
600 CTSO600PG
750 CTSO750PG
900 CTSO900PG

49
98
 Cable tray systems Cable tray systems

Cable tray systems

Cover - 90º internal riser Hanger brackets
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Includes 8 fixing clamps and fasteners
Width
mm
Width Light duty Medium duty Heavy duty
mm 50 CTHB050/PG

50 CTIR12CV/0050PG90 CTIR25CC/0050PG90 N/A 75 CTHB075/PG

75 CTIR12CV/0075PG90 CTIR25CC/0075PG90 CTIR50CC/0075PG90 100 CTHB100/PG

100 CTIR12CV/0100PG90 CTIR25CC/0100PG90 CTIR50CC/0100PG90 150 CTHB150/PG

150 CTIR12CV/0150PG90 CTIR25CC/0150PG90 CTIR50CC/0150PG90

225 CTIR12CV/0225PG90 CTIR25CC/0225PG90 CTIR50CC/0225PG90
300 CTIR18CV/0300PG90 CTIR25CC/0300PG90 CTIR50CC/0300PG90
450 N/A CTIR25CC/0450PG90 CTIR50CC/0450PG90
600 N/A CTIR25CC/0600PG90 CTIR50CC/0600PG90 Straight divider - 3m
750 N/A N/A CTIR50CC/0750PG90 Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
900 N/A N/A CTIR50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray. Tray depth
mm
Cover - 90º external riser 25 CTDI025PG3
50 CTDI050PG3
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Standard closed covers = CC, ventilated cover = CV
Includes 8 fixing clamps and fasteners

Width Light duty Medium duty Heavy duty

mm
50 CTER12CV/0050PG90 CTER25CC/0050PG90 N/A
75 CTER12CV/0075PG90 CTER25CC/0075PG90 CTER50CC/0075PG90 Earthing straps
100 CTER12CV/0100PG90 CTER25CC/0100PG90 CTER50CC/0100PG90 Finish: electro-tinned
150 CTER12CV/0150PG90 CTER25CC/0150PG90 CTER50CC/0150PG90
225 CTER12CV/0225PG90 CTER25CC/0225PG90 CTER50CC/0225PG90 Use M6 x 12 roofing bolts Supplied in packs of 10
300 CTER18CV/0300PG90 CTER25CC/0300PG90 CTER50CC/0300PG90 CT/ES100
450 N/A CTER25CC/0450PG90 CTER50CC/0450PG90 Copper braid electro tinned 4mm2, 100mm long
600 N/A CTER25CC/0600PG90 CTER50CC/0600PG90
750 N/A N/A CTER50CC/0750PG90
900 N/A N/A CTER50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Roofing bolts and nuts
Stand off brackets
Finish: BZP as standard, stainless steel grade 316 = SS
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS

Width M6 x 12 roofing bolts

mm Supplied in packs of 100
50 CTSO050PG M06X12RB
75 CTSO075PG
100 CTSO100PG
150 CTSO150PG
225 CTSO225PG
300 CTSO300PG
450 CTSO450PG
600 CTSO600PG
750 CTSO750PG
900 CTSO900PG

48
99
CABLE TRAYS

KBSI

CABLE TRAYS KBS

KGI / KG

NATO

100
 CABLE TRAYS

101
CABLE TRAYS

KBSI 35 QUICK & CLICK

Cable tray with interlocking ends

Interlocking ends
Alternative perforations
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
- KBSI 35*075*0.75 35 75 0.750 3000 0.810 60 P m
- KBSI 35*075*1.00 35 75 1.000 3000 1.080 60 P m
- KBSI 35*100*0.75 35 100 0.750 3000 0.930 60 P m
- KBSI 35*100*1.00 35 100 1.000 3000 1.240 60 P m
- KBSI 35*150*0.75 35 150 0.750 3000 1.170 60 P m
- KBSI 35*150*1.00 35 150 1.000 3000 1.560 60 P m
- KBSI 35*200*0.75 35 200 0.750 3000 1.420 60 P m
- KBSI 35*200*1.00 35 200 1.000 3000 1.890 60 P m
- KBSI 35*300*0.75 35 300 0.750 3000 1.910 60 P m
- KBSI 35*300*1.00 35 300 1.000 3000 2.540 60 P m

To fix with:

- KBV - - - - 0.010 96 P piece

LOAD DIAGRAM
Graph valid for KBSI 35. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

CHARACTERISTICS
Embedded perforations for :
- extra load capacity
- better aeration
- better stability
- better condensation drainage

Alternative perforations for :

- better fixation on the supports
- very useful for cable fixation.

Earthing.

TECHNICAL INFORMATION
The perforation scheme differs according to the width.
The surface of the interlocking end is rounded in order to protect the cables.
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.

102
 CABLE TRAYS

KBSI 60 QUICK & CLICK

Cable tray with interlocking ends

Interlocking ends
Alternative perforations
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KBSI 60*075*0.75 60 75 0.750 3000 1.050 60 P m
- KBSI 60*075*1.00 60 75 1.000 3000 1.400 60 P m
- KBSI 60*075*1.25 60 75 1.250 3000 1.750 60 P m
HD KBSI 60*100*0.75 60 100 0.750 3000 1.170 60 P m
HD KBSI 60*100*1.00 60 100 1.000 3000 1.560 60 P m
- KBSI 60*100*1.25 60 100 1.250 3000 1.950 60 P m
HD KBSI 60*150*0.75 60 150 0.750 3000 1.420 30 P m
HD KBSI 60*150*1.00 60 150 1.000 3000 1.890 30 P m
- KBSI 60*150*1.25 60 150 1.250 3000 2.360 30 P m
HD KBSI 60*200*0.75 60 200 0.750 3000 1.660 30 P m
HD KBSI 60*200*1.00 60 200 1.000 3000 2.220 30 P m
- KBSI 60*200*1.25 60 200 1.250 3000 2.770 30 P m
HD KBSI 60*250*0.75 60 250 0.750 3000 1.910 30 P m
- KBSI 60*250*1.00 60 250 1.000 3000 2.540 30 P m
HD KBSI 60*300*0.75 60 300 0.750 3000 2.150 30 P m
HD KBSI 60*300*1.00 60 300 1.000 3000 2.870 30 P m
- KBSI 60*300*1.25 60 300 1.250 3000 3.580 30 P m
HD KBSI 60*400*1.00 60 400 1.000 3000 3.520 30 P m
- KBSI 60*400*1.25 60 400 1.250 3000 4.400 30 P m
HD KBSI 60*500*1.00 60 500 1.000 3000 4.170 30 P m
- KBSI 60*500*1.25 60 500 1.250 3000 5.210 30 P m
- KBSI 60*600*1.00 60 600 1.000 3000 4.820 30 P m
- KBSI 60*600*1.25 60 600 1.250 3000 6.030 30 P m

To fix with:

- KBV - - - - 0.010 96 P piece

LOAD DIAGRAM
Graph valid for KBSI 60. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

More technical specifications for this product can be found at the end of this chapter.
Other lengths min. 1.80 m / max. 6 m for each run of 100 mm.

103
CABLE TRAYS

KBSI 60*6
Cable tray with interlocking ends
Interlocking ends
Alternative perforations
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
- KBSI 60*075*1.00*6 60 75 1.000 6000 1.400 60 P m
- KBSI 60*100*1.00*6 60 100 1.000 6000 1.560 60 P m
- KBSI 60*150*1.00*6 60 150 1.000 6000 1.890 30 P m
- KBSI 60*200*1.00*6 60 200 1.000 6000 2.220 30 P m
- KBSI 60*300*1.00*6 60 300 1.000 6000 2.870 30 P m
- KBSI 60*400*1.00*6 60 400 1.000 6000 3.520 30 P m

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

LOAD DIAGRAM
Graph valid for KBSI 60*6. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

Other lengths on request : min. 1.80 m / max. 6 m per steps of 100 mm.

CHARACTERISTICS
Embedded perforations for :
- extra load capacity
- better aeration
- better stability
- better condensation drainage

Alternative perforations for :

- better fixation on the supports
- very useful for cable fixation.

Earthing.

TECHNICAL INFORMATION
The perforation scheme differs according to the width.
Alternative perforation beginning at width 200 mm.
The surface of the interlocking end is rounded in order to protect the cables.
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.

Separation ‘SLIS 60’ can be used on any width from 200 mm.

104
 CABLE TRAYS

KBS 35
Perforated cable tray
Alternative perforation
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KBS 35*050*0.75 35 50 0.750 3000 0.680 150 P m
HD KBS 35*050*1.00 35 50 1.000 3000 0.920 150 P m
HD KBS 35*075*0.75 35 75 0.750 3000 0.810 60 P m
HD KBS 35*075*1.00 35 75 1.000 3000 1.080 60 P m
HD KBS 35*100*0.75 35 100 0.750 3000 0.930 60 P m
HD KBS 35*100*1.00 35 100 1.000 3000 1.240 60 P m
HD KBS 35*150*0.75 35 150 0.750 3000 1.170 60 P m
HD KBS 35*150*1.00 35 150 1.000 3000 1.560 60 P m
HD KBS 35*200*0.75 35 200 0.750 3000 1.420 60 P m
HD KBS 35*200*1.00 35 200 1.000 3000 1.890 60 P m
HD KBS 35*300*0.75 35 300 0.750 3000 1.910 60 P m
HD KBS 35*300*1.00 35 300 1.000 3000 2.540 60 P m
HD KBS 35*400*1.00 35 400 1.000 3000 3.190 60 P m
- KBS 35*500*1.00 35 500 1.000 3000 3.840 60 P m
- KBS 35*600*1.00 35 600 1.000 3000 4.500 60 P m

To fix with:

- V 35 27 180 - - 0.050 48 P piece

HD V 35*200 25 200 - - 0.040 48 P piece

LOAD DIAGRAM
Graph valid for KBS 35. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

CHARACTERISTICS
Embedded perforations for :
- extra load capacity
- better aeration
- better stability
- better condensation drainage

Alternative perforations for :

- better fixation on the supports
- very useful for cable fixation

TECHNICAL INFORMATION
The perforation scheme differs according to the width.
Alternative perforation beginning at 200 mm.
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.
KBS 35*050*0.75 en KBS 35*050*1.00: no knock-out facility (pre-shaped holes).

105
CABLE TRAYS

KBS 60
Perforated cable tray
Alternative perforation
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KBS 60*050*0.75 60 50 0.750 3000 0.930 60 P m
HD KBS 60*050*1.00 60 50 1.000 3000 1.240 60 P m
HD KBS 60*075*1.00 60 75 1.000 3000 1.400 60 P m
HD KBS 60*075*1.25 60 75 1.250 3000 1.750 60 P m
HD KBS 60*100*1.00 60 100 1.000 3000 1.560 60 P m
HD KBS 60*100*1.25 60 100 1.250 3000 1.950 60 P m
HD KBS 60*100*1.50 60 100 1.500 3000 2.350 60 P m
HD KBS 60*150*1.00 60 150 1.000 3000 1.890 30 P m
HD KBS 60*150*1.25 60 150 1.250 3000 2.360 30 P m
HD KBS 60*150*1.50 60 150 1.500 3000 2.830 30 P m
HD KBS 60*200*1.00 60 200 1.000 3000 2.220 30 P m
HD KBS 60*200*1.25 60 200 1.250 3000 2.770 30 P m
HD KBS 60*200*1.50 60 200 1.500 3000 3.320 30 P m
HD KBS 60*250*1.00 60 250 1.000 3000 2.540 30 P m
HD KBS 60*300*1.00 60 300 1.000 3000 2.870 30 P m
HD KBS 60*300*1.25 60 300 1.250 3000 3.580 30 P m
HD KBS 60*300*1.50 60 300 1.500 3000 4.300 30 P m
HD KBS 60*400*1.00 60 400 1.000 3000 3.520 30 P m
HD KBS 60*400*1.25 60 400 1.250 3000 4.400 30 P m
HD KBS 60*400*1.50 60 400 1.500 3000 5.280 30 P m
HD KBS 60*500*1.00 60 500 1.000 3000 4.170 30 P m
HD KBS 60*500*1.25 60 500 1.250 3000 5.210 30 P m
HD KBS 60*500*1.50 60 500 1.500 3000 6.250 30 P m
HD KBS 60*600*1.25 60 600 1.250 3000 6.030 30 P m
HD KBS 60*600*1.50 60 600 1.500 3000 7.230 30 P m

To fix with:

HD V 60*200 50 200 - - 0.080 48 P piece

- V 60 52 180 - - 0.090 48 P piece

LOAD DIAGRAM
Graph valid for KBS 60. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3. test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.
KBS 60*050*0.75 and KBS 60*050*1.00: No knock-out facility (pre-shaped holes).

106
 CABLE TRAYS

KBS 85
Perforated cable tray
Alternative perforation
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KBS 85*100*1.00 85 100 1.000 3000 1.890 24 P m
HD KBS 85*150*1.00 85 150 1.000 3000 2.220 24 P m
HD KBS 85*200*1.00 85 200 1.000 3000 2.540 24 P m
HD KBS 85*300*1.00 85 300 1.000 3000 3.190 24 P m
HD KBS 85*400*1.00 85 400 1.000 3000 3.840 24 P m
HD KBS 85*400*1.50 85 400 1.500 3000 5.770 24 P m
HD KBS 85*500*1.25 85 500 1.250 3000 5.620 24 P m
HD KBS 85*500*1.50 85 500 1.500 3000 6.740 24 P m
HD KBS 85*600*1.25 85 600 1.250 3000 6.430 24 P m
HD KBS 85*600*1.50 85 600 1.500 3000 7.720 24 P m

To fix with:

- V 85 77 180 - - 0.130 48 P piece

HD V 85*200 75 200 - - 0.130 48 P piece

LOAD DIAGRAM
Graph valid for KBS 85. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

CHARACTERISTICS
Embedded perforations for :
- extra load capacity
- better aeration
- better stability
- better condensation drainage

Alternative perforations for :

- better fixation on the supports
- very useful for cable fixation

TECHNICAL INFORMATION
The perforation scheme differs according to the width.
Alternative perforation beginning at 200 mm.
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.

107
CABLE TRAYS

KBS 110
Perforated cable tray
Alternative perforation
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KBS 110*150*1.25 110 150 1.250 3000 3.180 24 P m
HD KBS 110*200*1.25 110 200 1.250 3000 3.580 24 P m
HD KBS 110*300*1.25 110 300 1.250 3000 4.400 24 P m
HD KBS 110*400*1.25 110 400 1.250 3000 5.210 24 P m
HD KBS 110*500*1.25 110 500 1.250 3000 6.030 24 P m
HD KBS 110*500*1.50 110 500 1.500 3000 7.230 24 P m
HD KBS 110*600*1.25 110 600 1.250 3000 6.840 24 P m
HD KBS 110*600*1.50 110 600 1.500 3000 8.210 24 P m

To fix with:

HD V 110*200 100 200 - - 0.170 48 P piece

LOAD DIAGRAM
Graph valid for KBS 110. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

CHARACTERISTICS
Embedded perforations for :
- extra load capacity
- better aeration
- better stability
- better condensation drainage

Alternative perforations for :

- better fixation on the supports
- very useful for cable fixation

TECHNICAL INFORMATION
The perforation scheme differs according to the width.
Alternative perforation beginning at 200 mm.
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.

108
 CABLE TRAYS

KBS 110*6
Perforated cable tray
Alternative perforation
Return flanges
Support distance up to 6 meter
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KBS 110*200*1.50*6 110 200 1.500 6000 4.300 24 P m
HD KBS 110*300*1.50*6 110 300 1.500 6000 5.280 24 P m
HD KBS 110*400*1.50*6 110 400 1.500 6000 6.250 24 P m
HD KBS 110*500*1.50*6 110 500 1.500 6000 7.230 24 P m
HD KBS 110*600*1.50*6 110 600 1.500 6000 8.210 24 P m

To fix with:

HD KPW 115 400 - - 0.590 24 P piece

LOAD DIAGRAM
Graph valid for KBS 110*6. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III .

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/200

CHARACTERISTICS
Embedded perforations for :
- extra load capacity
- better aeration
- better stability
- better condensation drainage

Alternative perforations for :

- better fixation on the supports
- very useful for cable fixation

TECHNICAL INFORMATION
The perforation scheme differs according to the width.
Alternative perforation beginning at 200 mm.
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.

109
CABLE TRAYS

KBSM(I)
Cable tray machine constr. interl. ends
Alternative perforation
Return flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
- KBSM 60*050*1.00 60 50 1.000 3000 1.240 3 P m
- KBSMI 60*075*1.00 60 75 1.000 3000 1.400 3 P m
- KBSMI 60*100*1.00 60 100 1.000 3000 1.560 3 P m
- KBSMI 60*150*1.00 60 150 1.000 3000 1.890 3 P m
- KBSMI 60*200*1.00 60 200 1.000 3000 2.200 3 P m
- KBSMI 60*300*1.00 60 300 1.000 3000 2.870 3 P m

- Cable tray machine constructions, interlocking from width 75 mm (connect width 50 mm with jointing
plate)
- Large cable outlet (dimensions 30x50 mm) with round corners
- Distance between cable outlets: bottom = 150 mm, sides = 300 mm
- Edge protection RBKBSM to order separately
- Round cable gland central to the bottom, alternately M16/M20
- The cable outlet holes allow the cable trays to be used in machine constructions, especially in the field of
internal transport
- Can be used as lighting rail by immediately connecting through bottom perforations M16 and M20
- Staggered slots in sides and bottom for easy connection with accessories
- To be used with standard accessories, such as the cover with swerve clamp

KGI 60 QUICK & CLICK

Cable tray not perforated, interlocking

Not perforated
Return flanges
On Demand Height 35 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KGI 60*075*1.00 60 75 1.000 3000 1.700 3 P m
HD KGI 60*100*1.00 60 100 1.000 3000 1.900 3 P m
HD KGI 60*150*1.00 60 150 1.000 3000 2.300 3 P m
HD KGI 60*200*1.00 60 200 1.000 3000 2.700 3 P m
HD KGI 60*250*1.00 60 250 1.000 3000 3.100 3 P m
HD KGI 60*300*1.00 60 300 1.000 3000 3.500 3 P m
- KGI 60*300*1.25 60 300 1.250 3000 4.300 3 P m
HD KGI 60*400*1.00 60 400 1.000 3000 4.300 3 P m
- KGI 60*400*1.25 60 400 1.250 3000 5.300 3 P m
- KGI 60*500*1.25 60 500 1.250 3000 6.300 3 P m
- KGI 60*600*1.25 60 600 1.250 3000 7.300 3 P m

To fix with:

- KBV - - - - 0.010 96 P piece

110
 CABLE TRAYS

LOAD DIAGRAM
Graph valid for KGI 60. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

KG 110
Cable tray not perforated
Not perforated
Return flanges
On Demand Height 85 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD KG 110*100*1.50 110 100 1.500 3000 4.000 18 P m
HD KG 110*150*1.50 110 150 1.500 3000 4.590 18 P m
HD KG 110*200*1.50 110 200 1.500 3000 5.180 18 P m
HD KG 110*300*1.50 110 300 1.500 3000 6.360 18 P m
HD KG 110*400*1.50 110 400 1.500 3000 7.540 18 P m
HD KG 110*500*1.50 110 500 1.500 3000 8.710 18 P m
HD KG 110*600*1.50 110 600 1.500 3000 9.890 18 P m

To fix with:

HD V 110*200 100 200 - - 0.170 48 P piece

LOAD DIAGRAM
Graph valid for KG 110. This diagram illustrates the permissible uniformly distributed loads applied to
multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span.

F = max. admissible load (daN/m)

L = support distance (m)
Max. deflection (m) = L/100

111
CABLE TRAYS

NATO 15
Perforated cable tray - upright flanges
Linear and alternative perforations
Upright flanges
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD NATO 15*050*1.25 15 50 1.250 2000 0.730 40 P m
HD NATO 15*100*1.25 15 100 1.250 2000 1.050 20 P m
HD NATO 15*150*1.25 15 150 1.250 2000 1.350 20 P m
HD NATO 15*200*1.25 15 200 1.250 2000 1.700 20 P m
HD NATO 15*300*1.25 15 300 1.250 2000 2.400 20 P m

To fix with:

HD V 15*200 20 150 - - 0.050 48 P piece

LOAD DIAGRAM
Graph valid for NATO 15, mounted in continuous span with the jointing plates 1/5 away from the supports.
Safety factor = 2.

F = max. admissible load (daN/m)

L = support distance (m)
L/200 = deflection (m)

D
Universal cover
Especially used for horizontal en vertical sections
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD D 050 10 50 - 3000 0.350 3 P m
HD D 075 10 75 - 2000 0.500 10 P m
HD D 100 10 100 - 2000 0.820 10 P m
HD D 150 10 150 - 2000 1.170 10 P m
HD D 200 10 200 - 2000 1.420 10 P m
HD D 250 10 250 - 2000 1.850 10 P m
HD D 300 10 300 - 2000 2.100 10 P m
HD D 400 10 400 - 2000 4.150 10 P m
HD D 500 10 500 - 2000 5.000 10 P m
HD D 600 10 600 - 2000 5.650 10 P m

To fix with:

- DCO - - - - 0.010 96 P piece

- DCL - - - - 0.010 96 P piece

Covers with width > 400 mm are delivered with diagonal reinforcements.

112
 CABLE TRAYS

DCO QUICK & CLICK

Lid clamp
Standard finish Spring steel

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- DCO - - - - 0.010 96 P piece

2 pieces per meter.

DCL QUICK & CLICK

Lid clamp clips

Standard finish Stainless Steel 316

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- DCL - - - - 0.010 96 P piece

2 pieces per meter.

Not applicable for KG.

113
CABLE TRAYS

B 90
Horizontal bend 90°
Slides over the cable trays
Radius 100 mm
On Demand Height 35mm - 85mm - 110mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

W 50 75 100 150 200 250 300 400 500 600

A 255 280 305 355 405 455 505 605 705 805
B 255 280 305 355 405 455 505 605 705 805

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD B 90*60*050 60 50 - - 0.480 1 P piece
HD B 90*60*075 60 75 - - 0.520 1 P piece
HD B 90*60*100 60 100 - - 0.740 1 P piece
HD B 90*60*150 60 150 - - 0.830 1 P piece
HD B 90*60*200 60 200 - - 1.380 1 P piece
HD B 90*60*250 60 250 - - 1.860 1 P piece
HD B 90*60*300 60 300 - - 2.300 1 P piece
HD B 90*60*400 60 400 - - 2.960 1 P piece
HD B 90*60*500 60 500 - - 5.430 1 P piece
HD B 90*60*600 60 600 - - 6.690 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

More technical specifications for this product can be found at the end of this chapter.
Minimum number bolts and nuts VM 6*10: 8 pieces.

114
 CABLE TRAYS

DB 90
Cover for horizontal bend 90°
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

50 75 100 150 200 250 300 400 500 600

B 256 281 306 356 406 456 506 606 706 806

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DB 90*050 10 56 - - 0.520 1 P piece
HD DB 90*075 10 81 - - 0.620 1 P piece
HD DB 90*100 10 106 - - 0.730 1 P piece
HD DB 90*150 10 156 - - 0.980 1 P piece
HD DB 90*200 10 206 - - 1.260 1 P piece
HD DB 90*250 10 256 - - 1.590 1 P piece
HD DB 90*300 10 306 - - 1.950 1 P piece
HD DB 90*400 10 406 - - 2.780 1 P piece
HD DB 90*500 10 506 - - 3.750 1 P piece
HD DB 90*600 10 606 - - 4.880 1 P piece

To fix with:

- DCL - - - - 0.010 96 P piece

VH
Adjustable Corner 90-180°
Corner plate adjustable between 90° and 180°
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD VH 60*050 60 50 - - 0.350 1 P piece
HD VH 60*075 60 75 - - 0.350 1 P piece
HD VH 60*100 60 100 - - 0.400 1 P piece
HD VH 60*150 60 150 - - 0.500 1 P piece
HD VH 60*200 60 200 - - 0.700 1 P piece
HD VH 60*250 60 250 - - 0.900 1 P piece
HD VH 60*300 60 300 - - 1.150 1 P piece
HD VH 60*400 60 400 - - 1.700 1 P piece
HD VH 60*500 60 500 - - 2.500 1 P piece
HD VH 60*600 60 600 - - 3.450 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

115
CABLE TRAYS

T
Horizontal T-piece
Slides over the cable trays
Radius 100 mm
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

50 75 100 150 200 250 300 400 500 600

A 458 483 508 558 608 658 708 808 908 1008

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD T 60*050 60 50 - - 0.840 1 P piece
HD T 60*075 60 75 - - 0.980 1 P piece
HD T 60*100 60 100 - - 1.130 1 P piece
HD T 60*150 60 150 - - 1.520 1 P piece
HD T 60*200 60 200 - - 1.760 1 P piece
HD T 60*250 60 250 - - 2.250 1 P piece
HD T 60*300 60 300 - - 2.590 1 P piece
HD T 60*400 60 400 - - 3.380 1 P piece
HD T 60*500 60 500 - - 6.120 1 P piece
HD T 60*600 60 600 - - 7.260 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 12 pieces.

DT
Cover for horizontal T-piece
For all heights
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DT 050 10 56 - - 0.990 1 P piece
HD DT 075 10 81 - - 1.140 1 P piece
HD DT 100 10 106 - - 1.310 1 P piece
HD DT 150 10 156 - - 1.660 1 P piece
HD DT 200 10 206 - - 2.060 1 P piece
HD DT 250 10 256 - - 1.780 1 P piece
HD DT 300 10 306 - - 2.980 1 P piece
HD DT 400 10 406 - - 4.050 1 P piece
HD DT 500 10 506 - - 5.320 1 P piece
HD DT 600 10 606 - - 6.710 1 P piece

To fix with:

- DCL - - - - 0.010 96 P piece

116
 CABLE TRAYS

AS
Horizontal adapter 90°
Slides over the cable trays
Radius 100 mm
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

50 75 100 150 200 250 300 400 500 600

A 458 483 508 558 608 658 708 808 908 1008

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD AS 60*050 60 50 - - 0.580 1 P piece
HD AS 60*075 60 75 - - 0.620 1 P piece
HD AS 60*100 60 100 - - 0.680 1 P piece
HD AS 60*150 60 150 - - 0.710 1 P piece
HD AS 60*200 60 200 - - 0.810 1 P piece
HD AS 60*250 60 250 - - 0.910 1 P piece
HD AS 60*300 60 300 - - 0.930 1 P piece
HD AS 60*400 60 400 - - 1.130 1 P piece
HD AS 60*500 60 500 - - 1.530 1 P piece
HD AS 60*600 60 600 - - 1.780 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 8 pieces.

DAS
Cover for horizontal adapter 90°
For all heights
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DAS 050 10 56 - - 0.820 1 P piece
HD DAS 075 10 81 - - 0.870 1 P piece
HD DAS 100 10 106 - - 0.910 1 P piece
HD DAS 150 10 156 - - 1.010 1 P piece
HD DAS 200 10 206 - - 1.090 1 P piece
HD DAS 250 10 256 - - 0.550 1 P piece
HD DAS 300 10 306 - - 1.270 1 P piece
HD DAS 400 10 406 - - 1.450 1 P piece
HD DAS 500 10 506 - - 1.630 1 P piece
HD DAS 600 10 606 - - 1.810 1 P piece

To fix with:

- DCL - - - - 0.010 96 P piece

117
CABLE TRAYS

KR
Cross-over
Slides over the cable trays
Radius 100 mm
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD KR 60*050 60 50 - - 1.180 1 P piece
HD KR 60*075 60 75 - - 1.560 1 P piece
HD KR 60*100 60 100 - - 1.480 1 P piece
HD KR 60*150 60 150 - - 2.080 1 P piece
HD KR 60*200 60 200 - - 2.380 1 P piece
HD KR 60*250 60 250 - - 2.760 1 P piece
HD KR 60*300 60 300 - - 3.520 1 P piece
HD KR 60*400 60 400 - - 4.610 1 P piece
HD KR 60*500 60 500 - - 5.320 1 P piece
HD KR 60*600 60 600 - - 6.160 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 16 pieces.

DKR
Cover for cross-over
For all heights
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DKR 050 10 56 - - 0.450 1 P piece
HD DKR 075 10 81 - - 0.700 1 P piece
HD DKR 100 10 106 - - 0.770 1 P piece
HD DKR 150 10 156 - - 1.160 1 P piece
HD DKR 200 10 206 - - 1.590 1 P piece
HD DKR 250 10 256 - - 2.020 1 P piece
HD DKR 300 10 306 - - 2.480 1 P piece
HD DKR 400 10 406 - - 5.000 1 P piece
HD DKR 500 10 506 - - 6.700 1 P piece
HD DKR 600 10 606 - - 8.300 1 P piece

To fix with:

- DCL - - - - 0.010 96 P piece

118
 CABLE TRAYS

SB 90
Rising elbow 90°
Slides over the cable trays
Radius 100 mm
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD SB 90*60*050 60 50 - - 0.550 1 P piece
HD SB 90*60*075 60 75 - - 0.650 1 P piece
HD SB 90*60*100 60 100 - - 0.730 1 P piece
HD SB 90*60*150 60 150 - - 0.880 1 P piece
HD SB 90*60*200 60 200 - - 1.000 1 P piece
HD SB 90*60*250 60 250 - - 1.080 1 P piece
HD SB 90*60*300 60 300 - - 1.180 1 P piece
HD SB 90*60*400 60 400 - - 1.430 1 P piece
HD SB 90*60*500 60 500 - - 1.900 1 P piece
HD SB 90*60*600 60 600 - - 2.150 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 8 pieces.

SBCL QUICK & CLICK

Snap-in internal rising bend 90°

Snap-in system with cable tray KBS 60 and KBSI 60
Radius 100 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- SBCL 90*60*050 60 50 - - 0.550 1 P piece
- SBCL 90*60*075 60 75 - - 0.650 1 P piece
- SBCL 90*60*100 60 100 - - 0.730 1 P piece
- SBCL 90*60*150 60 150 - - 0.880 1 P piece
- SBCL 90*60*200 60 200 - - 1.000 1 P piece
- SBCL 90*60*250 60 250 - - 1.080 1 P piece
- SBCL 90*60*300 60 300 - - 1.180 1 P piece
- SBCL 90*60*400 60 400 - - 1.430 1 P piece
- SBCL 90*60*500 60 500 - - 1.900 1 P piece
- SBCL 90*60*600 60 600 - - 2.150 1 P piece

- opening for extra locking using 4x VM 6*10

- openings provided for fitting a lid
- Only available in height 60 mm.

119
CABLE TRAYS

DSB 90
Cover for rising elbow 90°
Flat banded.
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DSB 90*050 - 50 - - 0.150 1 P piece
HD DSB 90*075 - 75 - - 0.190 1 P piece
HD DSB 90*100 - 100 - - 0.260 1 P piece
HD DSB 90*150 - 150 - - 0.390 1 P piece
HD DSB 90*200 - 200 - - 0.510 1 P piece
HD DSB 90*250 - 250 - - 0.640 1 P piece
HD DSB 90*300 - 300 - - 0.770 1 P piece
HD DSB 90*400 - 400 - - 1.030 1 P piece
HD DSB 90*500 - 500 - - 1.290 1 P piece
HD DSB 90*600 - 600 - - 1.540 1 P piece

To fix with:

- DCL - - - - 0.010 96 P piece

VB 90
Low elbow 90°
Slides over the cable trays
Radius 100 mm
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD VB 90*60*050 60 50 - - 0.550 1 P piece
HD VB 90*60*075 60 75 - - 0.630 1 P piece
HD VB 90*60*100 60 100 - - 0.650 1 P piece
HD VB 90*60*150 60 150 - - 0.780 1 P piece
HD VB 90*60*200 60 200 - - 0.850 1 P piece
HD VB 90*60*250 60 250 - - 0.950 1 P piece
HD VB 90*60*300 60 300 - - 1.080 1 P piece
HD VB 90*60*400 60 400 - - 1.330 1 P piece
HD VB 90*60*500 60 500 - - 1.430 1 P piece
HD VB 90*60*600 60 600 - - 1.600 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 8 pieces.

120
 CABLE TRAYS

VBCL QUICK & CLICK

Snap-in external rising bend

Snap-in system with cable tray KBS 60 and KBSI 60
Radius 100 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- VBCL 90*60*050 60 50 - - 0.550 1 P piece
- VBCL 90*60*075 60 75 - - 0.630 1 P piece
- VBCL 90*60*100 60 100 - - 0.650 1 P piece
- VBCL 90*60*150 60 150 - - 0.780 1 P piece
- VBCL 90*60*200 60 200 - - 0.850 1 P piece
- VBCL 90*60*250 60 250 - - 0.950 1 P piece
- VBCL 90*60*300 60 300 - - 1.080 1 P piece
- VBCL 90*60*400 60 400 - - 1.330 1 P piece
- VBCL 90*60*500 60 500 - - 1.430 1 P piece
- VBCL 90*60*600 60 600 - - 1.600 1 P piece

- opening for extra locking using 4x VM 6*10

- openings provided for fitting a lid.
- Only available in height 60 mm.

DVB 90
Cover for low elbow 90°
Flat banded
On Demand Height of 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DVB 90*60*050 - 50 - - 0.150 1 P piece
HD DVB 90*60*075 - 75 - - 0.250 1 P piece
HD DVB 90*60*100 - 100 - - 0.340 1 P piece
HD DVB 90*60*150 - 150 - - 0.510 1 P piece
HD DVB 90*60*200 - 200 - - 0.680 1 P piece
HD DVB 90*60*250 - 250 - - 0.850 1 P piece
HD DVB 90*60*300 - 300 - - 1.020 1 P piece
HD DVB 90*60*400 - 400 - - 1.360 1 P piece
HD DVB 90*60*500 - 500 - - 1.710 1 P piece
HD DVB 90*60*600 - 600 - - 2.040 1 P piece

To fix with:

- DCL - - - - 0.010 96 P piece

121
CABLE TRAYS

SDB
Hinged joint double
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD SDB 60*050 60 50 - - 0.940 1 piece
HD SDB 60*075 60 75 - - 0.980 1 piece
HD SDB 60*100 60 100 - - 1.030 1 piece
HD SDB 60*150 60 150 - - 1.120 1 piece
HD SDB 60*200 60 200 - - 1.220 1 piece
HD SDB 60*250 60 250 - - 1.310 1 piece
HD SDB 60*300 60 300 - - 1.420 1 piece
HD SDB 60*400 60 400 - - 1.590 1 piece
HD SDB 60*500 60 500 - - 1.780 1 piece
HD SDB 60*600 60 600 - - 1.970 1 piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 8 pieces.

DS
Hinged joint
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD DS 35 35 - - - 0.110 24 piece
HD DS 60 60 - - - 0.130 50 P piece
HD DS 85 85 - - - 0.340 24 piece
HD DS 110 110 - - - 0.390 24 piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

122
 CABLE TRAYS

AZH
Universal coupling 90°
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD AZH 35 35 - - - 0.340 1 piece
HD AZH 60 60 - - - 0.390 1 P piece
HD AZH 85 85 - - - 0.750 1 piece
HD AZH 110 110 - - - 0.900 1 piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

BVSI
Stiffening plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD BVSI 050 46.6 100 - - 0.080 1 P piece
HD BVSI 075 70 100 - - 0.100 1 P piece
HD BVSI 100 75 100 - - 0.100 1 P piece
HD BVSI 150 125 100 - - 0.160 1 P piece
HD BVSI 200 175 100 - - 0.180 1 P piece
HD BVSI 250 225 100 - - 0.300 1 P piece
HD BVSI 300 275 100 - - 0.370 1 P piece
HD BVSI 400 375 100 - - 0.500 1 P piece
HD BVSI 500 475 100 - - 0.520 1 P piece
HD BVSI 600 575 100 - - 0.750 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

123
CABLE TRAYS

VS
Reducting plate
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD VS 60*025 50 25 - - 0.080 1 P piece
HD VS 60*050 50 50 - - 0.080 1 P piece
HD VS 60*075 50 75 - - 0.090 1 P piece
HD VS 60*100 50 100 - - 0.100 1 P piece
HD VS 60*125 50 125 - - 0.100 1 P piece
HD VS 60*150 50 150 - - 0.110 1 P piece
HD VS 60*200 50 200 - - 0.120 1 P piece
HD VS 60*250 50 250 - - 0.140 1 P piece
HD VS 60*300 50 300 - - 0.180 1 P piece
HD VS 60*350 50 350 - - 0.180 1 P piece
HD VS 60*400 50 400 - - 0.210 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

More technical specifications for this product can be found at the end of this chapter.
Minimum number bolts and nuts VM 6*10: 4 pieces.

E
End piece
On Demand Height 35 mm - 85 mm - 110 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD E 60*050 55 46 - - 0.110 1 P piece
HD E 60*075 55 71 - - 0.120 1 P piece
HD E 60*100 55 96 - - 0.130 1 P piece
HD E 60*150 55 146 - - 0.160 1 P piece
HD E 60*200 55 196 - - 0.180 1 P piece
HD E 60*250 55 246 - - 0.170 1 P piece
HD E 60*300 55 296 - - 0.220 1 P piece
HD E 60*400 55 396 - - 0.270 1 P piece
HD E 60*500 55 496 - - 0.310 1 P piece
HD E 60*600 55 596 - - 0.360 1 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

124
 CABLE TRAYS

RBKBSM
Edge protection KBSM(I)
Standard finish Polypropylene

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- RBKBSM - - - - 0.010 - P piece

MP
Folded mounting plate
For the fixation of contact and distribution boxes
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD MP 157 160 - - 0.180 50 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Number bolts and nuts VM 6*10: 2 pieces.

MPV
Flat mounting plate
For the fixation of contact and distribution boxes
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD MPV 175 160 - - 0.200 50 P piece

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

- KBV - - - - 0.010 96 P piece
HD VMK 6*10 - - M6 - 0.010 250 P piece

Number bolts and nuts VM 6*10: 2 pieces.

125
CABLE TRAYS

MPVCL QUICK & CLICK

Mounting plate clips

For the fixation of contact and distribution boxes.
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- MPVCL 175 160 - - 0.180 50 P piece

Clippable on the perforated cable tray with clip KBV.

SLOS
Division plate free
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD SLOS 35 35 - - 3000 0.330 150 P m
HD SLOS 60 60 - - 3000 0.510 120 P m
HD SLOS 85 85 - - 3000 0.680 60 P m
HD SLOS 110 110 - - 3000 0.820 3 P m

To fix with:

HD VM 6*10 - - M6 10 0.010 250 P piece

HD VMK 6*10 - - M6 - 0.010 250 P piece

Fixation set VM 6*10: 1 per meter.

SLIS QUICK & CLICK

Clip-in partition
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
- SLIS 60 60 - - 3000 0.440 3 P m

To fix with:

- CL - - - - 0.010 100 P piece

Fixation set clips CL : 4 pieces per length.

Separation SLIS can be used on any width from 200 mm.

126
 CABLE TRAYS

CL QUICK & CLICK

Clips for clip-in partition

Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- CL - - - - 0.010 100 P piece

4 pieces per length

SIN
Build-in division plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD SIN 85 85 - - 3000 0.670 3 m
HD SIN 110 110 - - 3000 0.900 3 m

This partition is pointwelded in the cable tray KG/KGI according to your specifications. The scale should
be given when ordering.

SINI
Build-in division plate KGI
On Demand Height 35 mm
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/m u Stock Unit
HD SINI 60 60 - - 2950 0.510 3 m

This partition is pointwelded in the cable tray KG according to your specifications.

The scale should be given when ordering.

127
CABLE TRAYS

V 35
Jointing plate for fast mounting
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- V 35 27 180 - - 0.050 48 P piece

Minimum number bolts and nuts VM 6*10: 1 pieces.

V 60
Jointing plate for fast mounting
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- V 60 52 180 - - 0.090 48 P piece

Minimum number bolts and nuts VM 6*10: 2 pieces.

V 85
Jointing plate for fast mounting
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- V 85 77 180 - - 0.130 48 P piece

Minimum number bolts and nuts VM 6*10: 2 pieces.

128
 CABLE TRAYS

V 15*200
Jointing plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD V 15*200 20 150 - - 0.050 48 P piece

V 35*200
Jointing plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD V 35*200 25 200 - - 0.040 48 P piece

Minimum number bolts and nuts VM 6*10: 2 pieces.

V 60*200
Jointing plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD V 60*200 50 200 - - 0.080 48 P piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

129
CABLE TRAYS

V 85*200
Jointing plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD V 85*200 75 200 - - 0.130 48 P piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

V 110*200
Jointing plate
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD V 110*200 100 200 - - 0.170 48 P piece

Minimum number bolts and nuts VM 6*10: 8 pieces.

KPW
Jointing plate for wide-span
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD KPW 115 400 - - 0.590 24 P piece

Minimum number bolts and nuts VM 6*10: 8 pieces.

130
 CABLE TRAYS

LV
Supporting corner
On Demand Powder coating / Duplex System
Standard finish Pre-galvanised
Optional finish 1 Hot-dip galvanised

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
HD LV 35 32 20 - - 0.080 24 piece
HD LV 60*85 60 43 - - 0.170 24 P piece
HD LV 110 94 58 - - 0.240 24 piece

Minimum number bolts and nuts VM 6*10: 4 pieces.

KBV QUICK & CLICK

Fast locking for KBSI

Standard finish Stainless Steel 316

C N KœL 2
HD Reference mm mm mm mm kg/piece u Stock Unit
- KBV - - - - 0.010 96 P piece

131
TECHNICAL INFORMATION

KBSI 60
Mounting principle

How do you proceed ?

Very simple :
1. Put two lengths together.
2. Slide them into each other.
3. Fix clips KBV for extra stability and safe locking.
4. Finished !!!

This system offers you various advantages :

1. Smaller cost price.
2. Faster mounting.
3. No bolts and nuts required.
4. Fixation with clips.
5. Earthing.
6. Easier fixation thanks to alternative perforations.
7. Better stability thanks to embedded perforations.
8. Better aeration of the cables thanks to embedded perforations.
9. Integrated cable protection thanks to overlapping ends.
10. Smooth finishing touch.
11. Smaller stock investment.

B 90
Mounting principle

132
 TECHNICAL INFORMATION

VS
Mounting principle

133