Scribd
Upload
127 views7 pages

Aashhto LRFD 2007 - Concrete Deck Design: HC 17,5 CM OK

This document provides input data and calculations to check the flexural strength of a concrete deck according to AASHTO LRFD 2007 standards. Key inputs include an effective span length of 17.5m, deck and asphalt thicknesses of 20cm and 8cm respectively, and a girder spacing of 80cm. Calculations determine the dead load, live load, and factored bending moments, which are then compared to the calculated flexural strength to check that the deck is adequate. The flexural strength calculation considers factors like reinforcement area, strength, and depth. The check shows the flexural strength exceeds the factored bending moment, indicating the deck design is sufficient.

Uploaded by

prasadnn2001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
127 views7 pages

Aashhto LRFD 2007 - Concrete Deck Design: HC 17,5 CM OK

This document provides input data and calculations to check the flexural strength of a concrete deck according to AASHTO LRFD 2007 standards. Key inputs include an effective span length of 17.5m, deck and asphalt thicknesses of 20cm and 8cm respectively, and a girder spacing of 80cm. Calculations determine the dead load, live load, and factored bending moments, which are then compared to the calculated flexural strength to check that the deck is adequate. The flexural strength calculation considers factors like reinforcement area, strength, and depth. The check shows the flexural strength exceeds the factored bending moment, indicating the deck design is sufficient.

Uploaded by

prasadnn2001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

AASHHTO LRFD 2007 - CONCRETE DECK DESIGN

INPUT DATA:

Effective span length L = 17.5 m

Deck Thickness hc > 17,5 cm OK hc = 20 cm

Asphalt Thickness ha = 8 cm

Girder spacing ( S.9.7.2.3.) S = 80 cm

Truck type KT = HS 20-44

Lanes numbers SS = 2

Reinforcement strength fy = 420 Mpa

Concrete 28-day compressive strength: f'c = 25 Mpa

Beton elastisite modülü Eci = 30000 Mpa

Concrete density: γc = 25 kN/m3

Asfalt density: γa = 23 kN/m3

Cover All edges are the same; pp = 2.5 cm

Bar Radius Top + Bottom; D = 12 mm


Bar spacing Top + Bottom; si = 15 cm

CALCULATIONS AND CHECKS

Dead load effects: (S.3.4.1-2)

Deck Moment Mc = hc.γc. S^2 / 10 Mc = 0.32 kN.m

Asphalt Moment Ma = ha.γa. S^2 / 10 Ma = 0.11776 kN.m

Live load effects (S.3.6.1.1.2-1)

Lanes factor SS = 2 için ; m = 1

Truck load Dy = Kam.yük * m Dy = 80 kN

Live load moment Mq =(s+0,6)*Dy/12 Mq = 9.333333 kN.m

impact factor θ = 1+ 50/(L+125) θ = 1.350877

Live load factored moment Mq'= θ .Mq Mq' = 12.60819 kN.m

Mu =1.25Mc + 1.5Ma + 1.75Mq' Mu = 22.64097 kN.m

Bending calculations : (S.5.7.3.2.1)

The pressure coefficient of the depth region β1 = 0.85

Moment safety factor ɸ = 0.9

Concrete tensile stress fr = 0,625√f'c fr = 3.125 Mpa

Section Length constant 1 m ; b = 100 cm

Sectional Elevation Account ds = hc-pp ds = 17.5 cm

Bar numbers Da = int(b/si)+1 Da = 7 Adet

Bar Numbers / Radius(mm) / spacing(cm) 7 θ 12 / 15

Total bar area As = Da.π.D^2/4 As = 7.916813 cm2

Depth of stress block a=As.Fy/0.85.f'c.b a = 1.564735 cm

Flexural strength Mn = As.fy.(ds-a/2) Mn = 55.58716 kN.m

Flexural strength of Coefficients Mr = ɸ.Mn Mr = 50.02844 kN.m


Mr > Mu ; OK

You might also like