Scribd Logo
Upload

Welcome to Scribd!

  • 110 views

    Valve Culata G3412 Especificacion

    Uploaded by

    carlos angel
    This document provides specifications for cylinder head valves on a G3412 generator set engine, including valve spring lengths and forces, valve stem and head diameters, valve seat angles and dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Valve Culata G3412 Especificacion

    Uploaded by

    carlos angel
    110 views3 pages
    This document provides specifications for cylinder head valves on a G3412 generator set engine, including valve spring lengths and forces, valve stem and head diameters, valve seat angles and dimensions.

    Original Description:

    3412

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for cylinder head valves on a G3412 generator set engine, including valve spring lengths and forces, valve stem and head diameters, valve seat angles and dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    110 views3 pages

    Valve Culata G3412 Especificacion

    Uploaded by

    carlos angel
    This document provides specifications for cylinder head valves on a G3412 generator set engine, including valve spring lengths and forces, valve stem and head diameters, valve seat angles and dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    G3412 Generator Set KAP00001-UP(SEBP3444 - 37) - Systems & Components Página 1 de 3

    Shutdown SIS

    Previous Screen

    Product: GENERATOR SET


    Model: G3412 GENERATOR SET KAP
    Configuration: G3412 Generator Set KAP00001-UP

    Specifications
    G3406 and G3412 Generator Set Engines
    Media Number -RENR5952-05 Publication Date -01/08/2010 Date Updated -23/08/2010

    i04002903

    Cylinder Head Valves


    SMCS - 1105

    S/N - KAP1-153

    Note: Refer to Reuse And Salvage Guidelines, SEBF8002, "Valves, Valve Springs, Valve
    Rotocoils, and Locks" and refer to Reuse And Salvage Guidelines, SEBF8034, "Valve and Valve
    Spring Specifications" for the procedure and specifications in order to check used valves and valve
    springs.

    https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 20/12/2017
    G3412 Generator Set KAP00001-UP(SEBP3444 - 37) - Systems & Components Página 2 de 3

    Illustration 1 g01405439

    (1) 4N-5906 Spring

    Length under test force ... 54.99 mm (2.165 inch)


    Test force ... 344 ± 34 N (77 ± 8 lb)
    Free length after test ... 62.74 mm (2.470 inch)
    Outside diameter ... 31.75 mm (1.250 inch)

    (A) Height to top of valve guide ... 32.30 ± 0.80 mm (1.272 ± 0.031 inch)

    Note: Apply clean engine oil to the valve stems prior to installation in the cylinder head.

    (B) Diameter of new valve stem

    Inlet valve ... 9.441 ± 0.008 mm (0.3717 ± 0.0003 inch)


    Exhaust valve ... 9.441 ± 0.010 mm (0.3717 ± 0.0004 inch)

    (C) Diameter of valve head

    https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 20/12/2017
    G3412 Generator Set KAP00001-UP(SEBP3444 - 37) - Systems & Components Página 3 de 3

    Inlet valve ... 44.98 ± 0.13 mm (1.771 ± 0.005 inch)


    Exhaust valve ... 41.81 ± 0.13 mm (1.646 ± 0.005 inch)

    (D) Angle of valve face ... 19.25 ± 0.25 degrees

    Illustration 2 g01405441

    Note: The temperature of the valve seats for installation into the bores in the bottom of the
    cylinder head is −62 °C (−80 °F).

    (E) Bore in cylinder head for valve seat

    Inlet valve seat ... 45.949 ± 0.025 mm (1.8090 ± 0.0010 inch)


    Exhaust valve seat ... 42.774 ± 0.025 mm (1.6840 ± 0.0010 inch)

    Note: The valve seats do not require machining after installation.

    (F) Angle of face of valve seat

    Inlet valve seat ... 20.25 ± 0.50 degrees


    Exhaust valve seat ... 20.25 ± 0.25 degrees

    (G) Depth of bore in cylinder head for new valve seat ... 11.48 ± 0.10 mm (0.452 ± 0.004 inch)

    (H) Outside diameter of the face of the valve seat

    Inlet valve seat ... 42.926 mm (1.6900 inch)


    Exhaust valve seat ... 38.6 mm (1.52 inch)

    Copyright 1993 - 2017 Caterpillar Inc. Wed Dec 20 13:22:18 UTC-0400 2017
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 20/12/2017

    You might also like