Scribd
Upload
891 views1 page

Astm Material Table - Commonly Used

This document provides a table summarizing commonly used materials for pipes, forgings, wrought fittings, castings, plates, bolts, and nuts. It lists material grades based on ASTM standards for carbon steel, stainless steel, low alloy steel, and low temperature carbon steel and their recommended temperature ranges.

Uploaded by

Surendar V
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
891 views1 page

Astm Material Table - Commonly Used

This document provides a table summarizing commonly used materials for pipes, forgings, wrought fittings, castings, plates, bolts, and nuts. It lists material grades based on ASTM standards for carbon steel, stainless steel, low alloy steel, and low temperature carbon steel and their recommended temperature ranges.

Uploaded by

Surendar V
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

ASTM TABLE

COMMONLY USED MATERIALS

MATERIALS CARBON STEEL (CS) STAINLESS STEEL (SS) LOW ALLOY STEEL (LAS) LOW TEMP. CARBON STEEL (LTCS)

– 29 °C to 427 °C – 196 °C to 538 °C – 29 °C to 538 °C – 46 °C to 343 °C

A 53 Gr. B (WELD/ SMLS) A 312 Gr. TP 304 (WELD / SMLS) 1/2 Cr - 1/2 Mo - A 335 Gr. P2 (SMLS) A 333 Gr. 6 (WELD / SMLS )

A 312 Gr. TP 316 (WELD / SMLS) 1 Cr - 1/2 Mo - A 335 Gr. P12 (SMLS) A 671 Gr. CC60 (EFW), 16'' & Above

A 106 Gr.B (SMLS) A 312 Gr. TP 321 (WELD / SMLS) 1 1/4 Cr - 1/2 Mo. - A 335 Gr.P11 (SMLS)

2 1/4 Cr - 1 Mo. - A 335 Gr.P22 (SMLS)

API 5L Gr.B (WELD /SMLS) A 358 Gr 304/316/321 3 Cr - 1 Mo. - A 335 Gr.P21 (SMLS)
PIPES 5 Cr - 1/2 Mo. - A 335 Gr.P5 (SMLS)

A 672 Gr. B 60 (WELD), A 409 (14''& 30 '' ) 9 Cr - 1 Mo. - A 335 Gr.P9 (SMLS)
16 '' & ABOVE

(If Base Material contain Low Carbon,


write 'L' after grade) A 691 Gr……..(EFW), High P & T, 16'' &
Above(Write Cr % in the Blank Space)

A 182 Gr. F 304 (18Cr - 8Ni ), 1/2 Cr - 1/2 Mo - A 182 Gr. F2

A 182 Gr. F 316 (16Cr - 12Ni-2Mo), 1 Cr - 1/2 Mo - A 335 Gr. F12


FORGING A 182 Gr. F 321 (18Cr - 10Ni-Ti), 1 1/4 Cr - 1/2 Mo. - A 335 Gr. F11
(1/2'' TO 1 1/2'')
Small Bore (If Base Material contain Low Carbon, 2 1/4 Cr - 1 Mo. - A 335 Gr. F22
Fittings , All 'O' A 105 write 'L' after grade) A 350 Gr. LF2 CLASS 1 & 2
3 Cr - 1 Mo. - A 335 Gr. F21
Let Fittings, Flanges,
5 Cr - 1/2 Mo. - A 335 Gr.F5
Small Bore Valves &
9 Cr - 1 Mo. - A 335 Gr.F9
Special Parts

A 403 Gr. WP 304 1 Cr - 1/2 Mo - A 234 Gr. WP 12

A 403 Gr. WP 316 1 1/4 Cr - 1/2 Mo. - A 234 Gr. WP 11

A 403 Gr. WP 321 2 1/4 Cr - 1 Mo. - A 234 Gr. WP 22


WROUGHT FITTINGS
A 234 Gr. WPB
( 2'' & (WELD & SMLS) (If Base Material contain Low Carbon,
5 Cr - 1/2 Mo. - A 234 Gr. WP 5 A 420 Gr. WPL - 6
ABOVE) write 'L' after grade 9 Cr - 1 Mo. - A 234 Gr. WP 9

A 351 Gr. CF8 (SS 304) 1 1/4 Cr - 1/2 Mo. - A 217 Gr. WC 6

A 351 Gr. CF8M (SS 316) 2 1/4 Cr - 1 Mo. - A 217 Gr. WC 9

A 351 Gr. CF8C (SS 321) 5 Cr - 1/2 Mo. - A 217 Gr. WC 5


CASTING
(Large Bore Valves & A 216 Gr. WCB A 351 Gr. CF8T (SS 347) 9 Cr - 1 Mo. - A 217 Gr. WC 12 A 352 Gr. LCB
Special Parts)
(If Base Material contain Low Carbon,
write 'L' after grade

A 240 Gr. 304 1/2 Cr - 1/2 Mo - A 387 Gr. 2 Cl.1

A 240 Gr. 316 1 Cr - 1/2 Mo -A 387 Gr. 12 Cl.1

A 240 Gr. 321 1 1/4 Cr - 1/2 Mo. - A 387 Gr. 11 Cl.1

(If Base Material contain Low Carbon, 2 1/4 Cr - 1 Mo. - A 387 Gr. 22 Cl.1
PLATES A 515 Gr. 60
write 'L' after grade
A 516 Gr. 60
3 Cr - 1 Mo. - A 387 Gr. 21 Cl.1

5 Cr - 1/2 Mo. - A 387 Gr. 5 Cl.1

9 Cr - 1 Mo. - A 387 Gr. 9 Cl.1

A 193 Gr.B7/ A 194 Gr. 2H A 193 Gr.B 8 Class II / A 194 Gr. 8 A 193 Gr.B 16 / A 194 Gr. 4

BOLTS / NUTS A 307 Gr. B / A 563 Gr. A A 320 Gr. L 7

You might also like