Pattern: Monkey

***You can purchase an INEXPENSIVE AD-FREE PDF of this pattern on Etsy HERE and on
Craftsy HERE. The printable PDF with step-by-step pictures has been condensed into a total of
6 pages including the cover page!

Meet Kiko, our kawaii baby monkey that we designed as a part of our Chinese New Year
series! He is adorably sweet with his poseable tail, arms and legs, and he is clutching on tightly
to his favourite snack of all: a banana!

Materials:

 lightweight tan yarn, level 3 (I used “Patons Astra” in “Medium tan”)

 lightweight beige yarn, level 3 (I used “Patons Astra” in “Aran”)
 sport weight yellow yarn, level 2 (I used Lion Brand Bonbons in the colour combo
“Beach”)
 2 mm Clover Amour crochet hook
 Yarn needle (bent tip helpful for attaching amigurumi parts- see HERE)
  Fiberfill
 9 mm safety eyes
 Brown embroidery floss (for nose/mouth and banana)
 Beige felt (for lining of ear)
 Clover lock ring stitch markers
 Optional: Decorative wiring, pink sharpie/paint/blush for cheeks

Note: I worked in continuous rounds (vs. joined rounds). The wiring in this amigurumi is
optional and should be used with caution as it is not safe for babies and young children. The
wiring makes the tail and limbs poseable but is not necessary.

***PLEASE follow along with my step-by-step blog post HERE to better understand this
written pattern and to visually see how to connect the parts with all my photos!

Finished Dimensions: 5.5″/14 cm tall and 4.5″/11.4 cm wide not including tail

FACE

Using beige yarn and 2 mm hook,

Chain 11 (we will be working in rows for this part).

R1: Starting from second chain from hook, Sc 10 (10 sts)

R2: Chain 1, turn. Inc, Inc, Sc 6, Inc, Inc (14 sts)

R3: Chain 1, turn. Inc, Sc 12, Inc (16 sts)

R4-5: Chain 1, turn. Sc 16

R6: Chain 1, turn. Inc, Sc 14, Inc (18 sts)

R7-11: Chain 1, turn. Sc 18 (18 sts)

We will now be dividing the face into half to form the heart-shaped forehead. Place Clover lock
ring stitch markers in the middle two stitches (9 sts in each half).
R12: Chain 1, turn. Sc, Hdc, Hdc, Dc, Dc, Dc, Hdc, Hdc, Sc (9 sts)

R13: Chain 1, turn. Dec, Hdc, Dc, Dc, Dc, Hdc, Dec (7 sts)

Fasten off. Rejoin yarn on far right side as shown below. Repeat Rows 12-13:

R12: Sc, Hdc, Hdc, Dc, Dc, Dc, Hdc, Hdc, Sc (9 sts)

R13: Chain 1, turn. Dec, Hdc, Dc, Dc, Dc, Hdc, Dec (7 sts)

We will now crochet around the perimeter of the face as shown below.
R14: Crochet counter-clockwise starting from red dot as shown in diagram above: 13 sc down
the side, 10 sc across, 13 sc up the side, 7 sc around the curve, 5 slip stitches in the area between
the dip of the curves (2 sl st, 1 sl st, 2 sl st), and then 7 sc around the other curve. (55 sts)

Fasten off.

HEAD

Switch to tan yarn as indicated by diagram below. There are 10 sts along the bottom- mark off
one of the halfway points with a stitch marker (the 6th stitch) and begin your brown yarn here:
R1: Sc 5, Inc, Sc 10, *Inc, Sc 1*, rep 5 times. Sc 3, *Sc 1, Inc*, rep 5 times. Sc 10, Inc, Sc 5
(67 sts)

R2: Sc 17, *Inc, Sc 2*, rep 4 times. Dec x 2, Sc 1, Dec x 2. *Sc 2, Inc*, rep 4 times. Sc 17 (71
sts)

R3: Sc 33, Dec, Sc 1, Dec, Sc 33 (69 sts)

R4: Sc 32, Dec, Sc 1, Dec, Sc 32 (67 sts)

R5-9: Sc 67

R10: *Sc 5, Dec*, rep 9 times. Sc 4 (58 sts).

R11-13: Sc 58

R14: *Sc 7, Dec*, rep 6 times. Sc 4 (52 sts)

R15: *Sc 11, Dec*, rep 4 times (48 sts)

R16: *Sc 6, Dec*, rep 6 times (42 sts)

R17: *Sc 5, Dec*, rep 6 times (36 sts)

Embroider nose with brown embroidery floss and place safety eyes between Rows 7-8 and 8
stitches apart. Begin stuffing head.
R18: *Sc 4, Dec*, rep 6 times (30 sts)

R19: *Sc 3, Dec*, rep 6 times (24 sts)

R20: *Sc 2, Dec*, rep 6 times (18 sts)

R21: *Sc, Dec*, rep 6 times (12 sts)

Finish stuffing head.

R22: *Dec*, rep 6 times (6 sts)

Draw through front loops of last stitches and pull tightly shut. Add pink cheeks to Monkey’s
face with pink sharpie, pink brads, or pink blush.

EARS (make 2)

Using tan yarn,

R1: 8 sc in Magic Ring (8 sts)

R2: 2 sc in each sc around (16 sts)

R3: *Sc 1, Inc*, rep 8 times (24 sts)

R4-6: Sc 24
Pinch shut and sew open ends together. Sew onto sides of head across Rounds 8-10 of tan yarn.
For lining of ear, cut two semi-circles out of beige felt and glue to inner ear.

BODY

Using tan yarn, begin forming triangular base:

Chain 2 (we will be working in rows for this part).

R1: Starting from second chain from hook, Sc 1 (1 st)

R2: Chain 1, turn. Inc (2 sts)

R3: Chain 1, turn. Inc x 2 (4 sts)

R4: Chain 1, turn. Inc, Sc 2, Inc (6 sts)

R5: Chain 1, turn. Sc 6 (6 sts)

R6: Chain 1, turn. Inc, Sc 4, Inc (8 sts)

R7: Chain 1, turn. Sc 8 (8 sts)

R8: Chain 1, turn. Inc, Sc 6, Inc (10 sts)

R9: Chain 1, turn. Sc 10 (10 sts)

R10: Crochet counter-clockwise around triangle starting from the red dot as indicated in diagram
above (we will now be working in rounds): 8 sc down the side, 1 sc at the bottom, 8 sc up the
other side, 10 sc across the top.

R11: In back loops only, Sc 27 (27 sts)

R12-13: Sc 27 (27 sts)

R14: *Sc 7, Dec*, rep 3 times (24 sts)

R15: Sc 24 (24 sts)

R16: *Sc 6, Dec*, rep 3 times (21 sts)

R17: Sc 21 (21 sts)

R18: *Sc 5, Dec*, rep 3 times (18 sts)

R19-20: Sc 18 (18 sts)

Fasten off and leave long end for sewing. If using wiring, cut at least 15″/38 cm of decorative
wiring. Form one end into triangular base that can fit into bottom of body. Place triangular base
into bottom of body while poking other end of wire out of corner of triangle to form tail. Secure
triangular base by tying each corner with yarn. Bend end of tail and wrap electrical tape around
it to prevent end from protruding out. Our final tail measured approximately 23 cm/9″ (with end
bent).
Form wire arms and legs as shown below, once again wrapping ends with electrical tape. Our
limbs measured approximately 3 cm/1.18″ long after being bent.. You can also crochet the limbs
first to gauge what size you need to make the wire inserts.

Now stuff and sew body to head. Attach head so that it is tilting downwards, near where the
beige face becomes the brown head.

ARMS (make 2)

Using beige yarn (no need to stuff if using wiring),

R1: 6 sc in Magic Ring (6 sts)

R2: *Sc 2, Inc*, rep 2 times (8 sts)

R3-4: Sc 8 (8 sts)

Switch to tan yarn,

R5-8: Sc 8 (8 sts)

Fasten off and leave long end for sewing. Insert onto wire arms and sew onto body.

LEGS (make 2)
Using beige yarn (no need to stuff if using wiring),

R1: 6 sc in Magic Ring (6 sts)

R2: *Sc 2, Inc*, rep 2 times (8 sts)

R3: *Sc 3, Inc*, rep 2 times (10 sts)

R4: Sc 10 (10 sts)

Switch to tan yarn,

R5-8: Sc 10 (10 sts)

Fasten off and leave long end for sewing. Insert onto wire legs and sew onto body.

TAIL

Using tan yarn (no need to stuff if using wiring),

R1: 6 sc in Magic Ring (5 sts)

R2-44: Sc 6 (6 sts).

Adjust tail to your desired length (shorter or longer based on your wire tail). Insert onto wire tail
and attach to back of body.

NOTES if not using wiring:

 Stuff arms and legs very lightly.

 Minimally stuff the tail (perhaps just at base where tail joins with body) to prevent the tail
from weighing down the monkey too much. Shorten the tail length (possibly to half) to
minimize weight.
 Do not stuff the body too much- make sure that the triangular base can be inverted so that
your monkey can sit well. If you stuff it too much, the triangular base will puff out,
making it impossible for your monkey to sit and likely to topple over.

BANANA

Using yellow yarn,

Chain 21 (we will be working in rows).

R1: Starting from second chain from hook, Sl st 2, Hdc 16, Sl st 2 (20 sts).
R2: Chain 1, turn. In front loops only, Sl st 2. In third loops only, Hdc 16. In front loops only,
Sl 2 (20 sts). [See tutorial HERE to learn how to locate third loops of half double crochets!]

R3: Chain 1, turn. Sl st 2, Hdc 16, Sl st 2 (20 sts).

R4: Repeat Row 2.

R5: Repeat Row 3.

R6: Repeat Row 2.

R7: Repeat Row 3.

R8: Sl st 2, *Hdc 2, Hdc dec*, rep 4 times, sl st 2. (16 sts)

Sew banana shut by sewing onto second last row as shown below.
Using brown embroidery floss, sew a star/asterisk onto bottom of banana. Then, sew around
perimeter of star.

To create stem:

Round 1: Pick up 4 stitches- Sc 4 (4 sts).

R2-4: Sc 4 (4 sts)

R5: Sc 1, Inc, Sc 2 (5 sts).

Fasten off and weave in ends.

Your adorable monkey is now complete! Have fun posing your cutie pies and making them for
all the little monkeys in your life!
Don’t forget to share your finished projects with me in the comments section below or on my
social media: Facebook, Twitter and Instagram! I love seeing how you each put your own
personal touches on your amigurumi! Happy 2016 Year of the Monkey, my friends ❤

{Update: See 20 Monkeys that have already been made all over the world following my free
pattern HERE!}

*** Get the pattern in Brazilian Portuguese HERE! Receita em Português Br disponível AQUI!

*** Get the pattern in Dutch HERE! Vind HIER het patroon in het Nederlands!
This pattern is an original pattern by Stephanie Lau of All About Ami (February 2016). Please
do not claim this pattern as your own. If you wish to share this pattern, you may link to this
pattern but please do not reprint it on your site. You may keep a copy for your own personal use
but please DO NOT sell the pattern or distribute it.

You may sell products made from this pattern but please clearly credit the design to me,
Stephanie Lau of All About Ami, and provide a link to my blog www.AllAboutAmi.com.
Permission is NOT granted for mass production or factory manufacturing of any kind. Thank
you for being respectful and for your understanding!