0% found this document useful (0 votes)
46 views1 page

1200 Dia. Steel Pipe Line: Bending Moment & Support Reaction

This document provides information about the bending moment and support reactions for a 1200mm diameter steel pipe line. It includes the pipe dimensions, material weights, span length, and calculations of the total linear weight, maximum forces and moments at the supports. The maximum bending moment is calculated as 272 kN.m using beam theory and the standard BS 8110.

Uploaded by

risriz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
46 views1 page

1200 Dia. Steel Pipe Line: Bending Moment & Support Reaction

This document provides information about the bending moment and support reactions for a 1200mm diameter steel pipe line. It includes the pipe dimensions, material weights, span length, and calculations of the total linear weight, maximum forces and moments at the supports. The maximum bending moment is calculated as 272 kN.m using beam theory and the standard BS 8110.

Uploaded by

risriz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1200 DIA.

STEEL PIPE LINE

BENDING MOMENT & SUPPORT REACTION

1. Data
Pipe ID, Di = 1.2 m
Pipe OD, Do = 1.224 m
Pipe wall thickness, t = 0.012 m
3
Weight of steel pipe = 78.5 kN/m
3
Weight of water = 10 kN/m
Pipe span = 12 m

2. Weight

Weight of pipe = 3.6 kN/m

Weight of water = 11.3 kN/m


Assume dynamic load factor = 1.2
Weight of water including dynamic effect = 14 kN/m

Total linear weight = 17.2 kN/m

3. Moment & Reaction (At intermediate supports)

Maximum Force at one support = 206 kN


Maximum Slope angle = 26 deg.
Minimum Slope angle = 0 deg.

Maximum axial Force, Ra = 90 kN


Maximum circumferential Force, Rc = 206 kN

Maximum bemding moment = 0.11*F*L


(Beam theory, BS 8110) = 272 kN.m

You might also like