CCH Full Brochure

Catalogue
Explosion-Protected Products
Cooper Crouse-Hinds Australia
Company Profile
For more than a century, companies have

relied on Cooper Crouse-Hinds for solutions
they can trust to grow their business.
By integrating a comprehensive line of electrical and

instrumentation products with expert support,
industry insights, and local availability,
Cooper Crouse-Hinds enhances safety and
productivity in the most demanding industrial,
harsh, and hazardous environments worldwide. This
philosophy is at the core of every product we
develop and every solution we engineer.
The more demanding the

environment, the likely it is that you
will find our products in operation.
Cooper Crouse-Hinds manufactures over
100,000 products for NEC, IEC and ABS
applications across the globe, including
• Conduit and cable fittings
• Enclosures
• Motor Controls and Electrical Apparatus
• Industrial and Marine Lighting
• Plugs & Receptacles
• Signals and Alarms
• Wireless and Solar Power
• Commercial Fittings and Outlet Boxes
• Electronic components and protection
equipment for process control
June, 2010 Copyright© Cooper Industries

Company Profile
At Cooper Crouse-Hinds,
innovation is in our DNA. Catalog Layout
As the electrical industry’s global Welcome to the enhanced and expanded
leader for hazardous environments, we’re Cooper Crouse-Hinds catalog. This catalog includes
products from the following 5 major product lines.
constantly pushing forward and looking ahead,
advancing electrical and instrumentation
Section 1 Application Protection
products in new and innovative ways. Techniques
We do this with a singular goal in mind — Section 2 Conduit and Cable Fittings
Enhancing Safety and Productivity
Section 3 Junction Boxes
thoughout your operation. It’s all fueled by a
fierce dedication to providing global solutions, Section 4 Industrial Control
worldwide reliability and intelligence and
expertise. Section 5 Lighting
Section 6 Plugs & Receptacles

Every new product or initiative must live up to
these uncompromising standards.
The product information published in our catalogs and literature

has been compiled with care and is sufficiently accurate for most
purposes. It is subject to change without notice. Occasionally, it
may be necessary to modify the materials, finishes, or other
components of the product. These changes will in no way
reduce the performance or function for which the product is
intended.
All statements, technical information and recommendations

contained herein are based on information we believe to be
reliable. The accuracy or completeness thereof are not
guaranteed. In accordance with Cooper Crouse-Hinds’ Terms
and Conditions of Sale, and since conditions of use are outside
our control, the purchaser should determine the suitability of the
product for his/her intended use and assumes all risk and liability
whatsoever in connection therewith.
All sales of Cooper Crouse-Hinds products are specifically

subject to the Terms and Conditions of Sale as shown on Cooper
Crouse-Hinds distributor or trade price sheets.
Copyright© Cooper Industries June, 2010

About Our Catalogue
MAJOR SECTIONS:
Our Catalogue is divided into six major product sections:
1 Application Protection Techniques
2 Fittings
3 Enclosures
4 Industrial Control
5 Hazardous Area Lighting
6 Hazardous Area Plugs & Receptacles
A table of contents appears in the front of each section listing

the products contained in the section by both series prefix
(e.g. DSEA) and general product type.
PRODUCT INFORMATION:
On the individual catalogue pages information is given for each
product family regarding application, features, compliances and
certification, options available and ordering information.
To help make the catalogue easier to use, a common location

of the materials appearing on each page is used wherever
possible.
MEASUREMENTS:
All units of measurements shown in this catalogue are in metric
units of mm and kg (except where otherwise indicated).
The product information published in our catalogues and litera-

ture is not guaranteed. It has been compiled with care and is
sufficiently accurate for most purposes. It is subject to change
without notice. Occasionally, it may be necessary to modify the
materials, finishes, or other components of the products. These
changes in no way will reduce the performance or function for
which the product is intended.
All statements, technical information and recommendations con-

tained herein are based on information and tests we believe to
be reliable. The accuracy or completeness thereof is not guar-
anteed. In accordance with Cooper Electrical Terms and Condi-
tions of Sale, and since conditions of use are outside our
control, the purchaser should determine the suitability of the
product for his intended use and the purchaser assumes all risk
and liability whatsoever in connection therein.

Section 1 Index
Explosion Protection
Typical Installation Reference ..........................................1-2

Quick Product Selector ....................................................1-3
Product Materials Guide ..................................................1-4
Explosion Protection Techniques ....................................1-5
1-1
Temperature Ratings & Gas Groups ................................1-8
IP Ratings ........................................................................1-9
Combustible Compounds Reference ............................1-10
Area Classification Comparison ....................................1-12
International Standards Reference Table ......................1-13
CEAG IEC Ex Approved Products CEAG 805 Cat ........1-14

Typical Installation Reference
1-2

Quick Product Selector
1-3
Weatherproof
Product Zone 1 Zone 2 Zones 21, 22
Only
Adaptors, Nipples, ANM, NHM, PLM, ANM, NHM, PLM, ANM, NHM, PLM,
Plugs, Reducers & REM, UNFA, UNYA REM, UNFA, UNYA REM, UNFA, UNYA
Unions
Alarms, Audible EOLA, FRFB, FSFB EOLA, FRFB, FSFB EOLA, FRFB, FSFB
& Visual
ADE1F, ADE4F ADE1F, ADE4F ADE1F, ADE4F

Cable Glands TWA, TUA
TWAB, TWAX, TWAE TWAB, TWAX, TWAE TWAB, TWAX, TWAE
Conduit Fittings EYSA, FE, FT, FC EYSA, FE, FT, FC FC, FB, FHC
& Seals
Control Stations DSA, DSEA DSA, DSEA DSEA

& Pilot Lights
Custom Built JBD, JBDC

EJBA & GHG44 EJBA & GHG44 JBW
Control Panels GHG 44
Small eAZK96, C30, C31 eAZK96, C30, C31 C30, C31, JBDC,
PBW
Junction Boxes GUA, GHG, PBEC GUA, GHG, PBEC GHG72, PBEC
Large Junction EJBA, GHG74, EJBA, GHG74,

Boxes, Enclosures & GUBA, JBE, JBEC, GUBA, JBE, JBEC, JBD, JBDC
Marshalling Boxes PBE, XLH PBE, XLH
AB12, AEV, AEVBH, AB12, AEV, AEVBH,

AB12, AEV, AEVBH,
eLLK, eLLM, EVM, eLLK, eLLM, EVM,
eLLK, eLLM, EVA,
Lighting Fixtures EVME, FZD, LED EVME, FZD, LED
EVME, FZD, LED
EXIT, NFMV, NLLK, EXIT, NFMV, NLLK,
EXIT, PX04, T100A
NVMV, PX04, T100A NVMV, PX04, T100A
CPBA, EJB, EJBA, CPBA, EJB, EJBA,

Panel Boards JBD
GHG61 GHG61
FNO, GHG5, FNO, GHG5,

Plugs & Receptacles FNO, PP, GHG5
FSQA, PP FSQA, PP
DSA, DSEA, EBA, DSA, DSEA, EBA,

Switches & ESA, ELS, ELFS, ESA, ELS, ELFS, DSEA, GHG26,
Circuit Breakers GHG26, GHG273, GHG26, GHG273, GHG273, GHG29
GHG29, GHG61 GHG29, GHG61
Motor Starters EMA, ESDA, GHG61 EMA, ESDA, GHG61

Product Materials Guide
Exd Exe Exn ExtD

1-4 Explosion Increased Non Dust Ignition
Proof Safety Sparking Proof
Cast Iron Steel
Aluminium
Cast Iron
High Tensile Brass
FRP
Mild Steel
Stainless Steel
FRP
Aluminium
Mild Steel
Stainless Steel
FRP
Aluminium
Mild Steel
Stainless Steel
Small Junction Boxes
& Conduit Fittings •••• • •• ••
Large Junction Boxes & Enclosures
•• ••• •••• •••
Motor Control Equipment
• • ••
Switches
•• • ••
Control Stations
•• • ••••
Panel Boards
• ••••
Incandescent Lighting Fixtures
•
Fluorescent Lighting Fixtures
• • •
HID Lighting Fixtures
• ••• • •
Plugs and Receptacles
• • • • ••
Note: Not all types listed are suitable for Zone 1 hazardous locations. Consult catalogue listing pages for application and gas groups

Explosion Protection Techniques
Many liquids, gases and dusts which are generated, The use of this certification will assist users in the selection
1-5
processed, handled, and stored in industry are combustible. of the correct equipment for use in hazardous locations.
When ignited they may burn rapidly and with considerable
explosive force. In order to make a selection of equipment it is necessary to
have the hazardous area classification defined, as laid out
in AS2430. However it is necessary for the classification to
contain details of the T rating and, for Zone 1, the Gas
group of the hazardous material.
Selection of Equipment
Figure 2 shows the techniques in common Australian usage
today, and some typical applications.
This does not mean that the other techniques are not used
and are not available in Australia or that they will not find in-
creasing use there.
The growth of the industries using explosion protected

equipment have given rise to an increased interest by com-
panies in local manufacture of this equipment, with the re-
sult that there is available today a significant amount of
locally manufactured products using all of the techniques in
The use of electrical apparatus in these areas is usually common use.
necessary to facilitate the handling or processing of the
hazardous materials. To remove the possibility of ignition In addition, this is supplemented by imported equipment
being caused by the electrical apparatus, suitable precau- which is available locally and which carries Australian certifi-
tions must be taken with both the equipment and the instal- cation.
lation methods used in these hazardous areas.
Improvements in electrical technology have resulted in the The Operating Environment

development of new and improved materials which have When selecting equipment for use in hazardous locations, it
given rise to a considerable increase in the range of options is very easy to overlook the environmental effects on equip-
available. These precautions are known today as Explo- ment.
sion Protection Techniques.
However, the operating environment can cause corrosion or
Growth in mining, chemical, petrochemical and associated similar degradation of equipment which could cause defec-
industries has encouraged the introduction of new tive operation after a long period of service.
techniques, and the Policy of Standards Australia in follow-
ing closely the I.E.C. recommendations, has led to the pub- For example, the use of plastic material in a spray booth or
lishing of Australian Standards on these techniques. solvent laden atmosphere should be avoided since the
chemicals may attack the plastic materials.
As a result of this the users of today have at their disposal a
package of techniques which allow additional consideration Conversely in the salt laden atmosphere experienced in off-
such as environment to be taken into account when choos- shore platforms and shipping applications, the use of plastic
ing equipment for use in hazardous locations. or stainless steel is preferable to aluminum.
A summary of the various techniques and their application Crouse-Hinds Australia can give personal assistance, if re-
in relation to area classification is shown in Figure 1. quired, when selection of materials is being made.
All these techniques, with the exception of Exm (hermeti-

cally sealed) and Exq (sand filled) are now covered by Aus-
tralian Standards in relation to manufacture and certification
of equipment.
In addition, Standards Australia runs a certification scheme

whereby this equipment can be type tested and certified as
complying with a particular Australian Standard.

Liquids, Gases & Vapours
1-6 ZONE 0 CONTINUOUSLY HAZARDOUS

(eg storage tank)
PROTECTION TECHNIQUES APPLICABLE
Ex ia INTRINSIC SAFETY
Ex s SPECIAL
ZONE 1 FREQUENTLY HAZARDOUS

UNDER NORMAL CONDITIONS
(eg container filling area, or a pump alley
in a refinery petrol pump)
Ex ib INTRINSIC SAFETY
Ex d FLAMEPROOF
Ex e INCREASED SAFETY
Ex p PRESSURISED OR PURGED
Ex s SPECIAL PROTECTION
ZONE 2 INFREQUENTLY HAZARDOUS

UNDER ABNORMAL CONDITIONS
(eg sealed container stored above 3m
in a plant)
Ex n NON SPARKING
Dusts, Fibres & Flyings
ZONES 21 & 22 DUST PRESENT IN AIR

OR SETTLED ON LEDGES ETC
(eg grain handling areas, starch and/or
flour mills)
Ex tD DUST TIGHT ENCLOSURE

Explosion Protection Techniques Commonly Used in Australia
1-7
Ex i
Energy Instrumentation and
Intrinsic Safety
limitation process control equipment
Ex d
Power equipment, high energy switching
Flameproof Containment
& HID lighting
Ex e
Increased Avoidance of Fluorescent lighting, junction boxes
Safety ignition source and marshalling boxes
Ex n Non Sparking
Zone 2 only.
Ex nR Restricted Avoidance Lighting and junction boxes cannot be used

Breathing with internal components that arc or spark
Ex p
Pressurised En- Exclusion Control cubicles, instrumentation
closure of the hazard and electric motors
Ex s
Proved by test
Special Specially tested for specific applications
unable to cause
Equipment (not widely used)
ignition
Ex tD
Dust
Exclusion All electrical equipment utilised in
Excluding
of the dust DIP locations
Ignition Proof
Note: The Australian Wiring Rules AS3000 applies to all installations.

Section 9 of AS3000 specifically refers to AS2381 for the special requirements for hazardous areas.

Temperature Ratings & Gas Groups
T Ratings (temperature ratings)
1-8 The Maximum Surface Temperature of Electrical Equipment

must not exceed the Ignition Temperature of the Hazardous
Substance, therefore the temperature rating of the equip-
ment selected must be lower than the Ignition Temperature
of the Hazardous Substance present in the area
Max Surface NEC IEC

Temperature Table 500-3 (d) T Class
4500C T1 T1 Gas Groups
3000C T2 T2
2800C T2A Gas Groups and their Representative Gases are as follows:
260 C
0
T2B
IEC Representative NEC
230 C
0
T2C
Group Gas Group
2150C T2D
Methane
2000C T3 T3 I I
(underground mining)
1800C T3A IIA Propane D
165 C
0
T3B IIB Ethylene C
160 C
0
T3C IIB (H2) Hydrogen B
1350C T4 T4 IIC Acetylene A
1200C T4A
While Gas Groups are shown on all forms of Protection they
1000C T5 T5 really only have any significance on Exd Flameproof type of
850C T6 T6 Protection where the dimensions of the flamepath vary ac-
cording to the Gas Group.
A "T" rating is assigned to equipment after testing to estab-
lish the maximum temperature reached during normal oper- The table shows these differences.
ation and under a 10% overload.
Example: Flamepath Dimensions
Gas Group
The components of the T ratings are: Width (mm) Max Gap (mm)
I 12.5 0.4
AMBIENT TEMPERATURE ........... 40°C
TEMPERATURE RISE ................... 80K (Kelvin) IIA 12.5 0.2
(from test results) IIB 12.5 0.15
MAX. SURFACE TEMP................. 120°C
IIC 25 0.04
Therefore since the manufacturer is guaranteeing that the
surface temperature will not exceed the "T" rating the
equipment would be assigned a T4 (135°C) rating.
The surface where the temperature is measured can vary
according to the Type of Protection, for example.
Exd Flameproof is taken on the exterior surface.
Exe Increased Safety is taken on the internal components
Exn Non-Sparking is taken on the internal components un-
less the equipment is Certified as a "Restricted Breathing
Enclosure" in which case it can be taken on the exterior
surface.

Ingress Protection (IP) Ratings
Degree of Protection Provided By Equipment
1-9
The first numeral indicates protection of
I P
The second numeral indicates protection
persons against access to dangerous
of internal equipment against harmful
parts and protection of internal equipment
ingress of water.
against the ingress of solid foreign objects.
X Protection unspecified (untested) X Protection unspecified (untested)
O No special protection provided O No special protection provided
1 1
Protection of hand against accidental
access to dangerous parts, Protection against drops of water
and protection of equipment against ob- falling vertically
jects larger than Ø 50mm*
2 2
Protection of fingers against access Protection against drops of water
to dangerous parts and protection of falling vertically when the object is tilted
equipment against objects larger than by up to 150 from it’s normal
Ø 12mm position (in any direction)
3 Protection against objects larger than

Ø 2.5mm (eg tools, small wires) 3 Protection against spraying water
at up to 600 from the vertical
4 4
Protection against splashing and spray-
Protection against objects larger than
ing water from all practicable
Ø 1mm (eg tools, small wires)
directions
5 5
Protection against entry of dust
Protection against a low pressure jet
in sufficient quantity to interfere with
of water from all practicable directions
satisfactory operation of equipment
6 6
Protection against heavy seas or a
Complete protection against entry
strong jet of water from all practicable
of dust
directions
7
*This dimension applies to the smallest of the three mutually
perpendicular dimensions of the object against which protection Protection against immersion
is provided
8
Protection against submersion
‘Flash’ symbol indicates dangerous parts (live or moving) (test subject to agreement, but no less
severe than numeral 7)
Note: The symbols shown in the above chart have been compiled for easy explanation only. They are not part of the IP
code and must not be used instead of the IP code. The chart should be used in conjunction with the AS1939 Classification of
Degrees of Protection provided by Enclosures for Electrical Equipment.
The fact that electrical equipment is certified as being of a particular type of Explosion Protection does not mean that it
automatically has a degree of protection against weather or environment. Therefore if equipment is to be used in an outdoor
environment care should be taken to ensure that it has appropriate IP Rating, as shown in the table.

Combustible Compounds Reference
Compound Ignition Temp Gas Compound Ignition Temp Gas

Temp Class Groups Temp Class Groups
1-10 acetaldehyde
acetic acid
acetone
140
485
535
T4
T1
T1
IIA
IIA
IIA
ethane
ethanol
ethanolamine
515
425
-
T1
T2
-
IIA
IIA
IIA
acetylacetone 340 T2 IIA ethoxyethanol 235 T3 IIB
acetyl chloride 390 T2 IIA ethyl acetate 460 T1 IIA
acetylene 305 T2 IIC ethyl acrylate - - IIB
acrylonitrile 480 T1 IIB ethylbenzene 431 T2 IIA
allyl chloride 390 T1 IIA ethyldigol - - IIA
allylene - - IIA ethylene425 T2 IIB
ammonia 630 T1 IIA ethylene oxide 440 T2 IIB
amphetamine - - IIA ethyl formate 440 T2 IIA
amyl acetate 375 T2 IIA ethyl mercaptan 295 T3 IIA
amyl methyl ketone - - IIA ethyl methyl ether 190 T4 IIB
aniline 617 T1 IIA ethyl methyl ketone 505 T1 IIA
benzene 560 T1 IIA formaldehyde 424 T2 IIB
benzaldehyde 190 T4 IIA formdimethylamide 440 T2 IIA
benzyl chloride 585 T1 IIA hexane 233 T3 IIA
blue water gas - T1 IIC hexanol - - IIA
bromobutane 265 T3 IIA heptane 215 T3 IIA
bromoethane 510 T1 IIA hydrogen 560 T1 IIC
butadiene 430 T2 IIB hydrogen sulphide 270 T3 IIB
butane 365 T2 IIA isopropyinitrate 175 T4 IIB
butanol 340 T2 IIA jet fuels 220 T3 IIA
butene 440 T2 IIB kerosene 210 T3 IIA
butyl acetate 370 T2 IIB methaldehyde - - IIA
butlyamine (312) T2 IIA methane (firedamp) 595 T1 IIA
butyldigol 225 T3 IIA methane (industrial) - T1 IIA
butyl methyl ketone (530) (T1) IIA methanol 455 T1 IIA
butyraldehyde 230 T3 IIA methoxyethanol 285 T3 IIB
carbon disulphide 100 T5 IIC methyl acetate 475 T1 IIA
carbon monoxide 605 T1 IIB methyl acetoacetate 280 T3 IIA
chlordimethyl ether - - IIA methyl acrylate - - IIB
chlorobenzene 637 T1 IIA methylamine 430 T2 IIA
chlorobutane (460) (T1) IIA methylcycohexane 260 T3 IIA
chloroethane 510 T1 IIA methylcycohexanol 295 T3 IIA
chloroethanol 425 T2 IIA methyl formate 450 T1 IIA
chloroethylene 470 T1 IIA naphtha 290 T3 IIA
chloromethane 625 T1 IIA naphtalene 528 T1 IIA
chloropropane 520 T1 IIA nitrobenzene 480 T1 IIA
coal tar naphtha 272 T3 IIA nitroeyhane 410 T2 IIB
coke oven gas - - IIB nitromethane 415 T2 IIA
cresol 555 T1 IIA nitropropane 420 T2 IIB
cyclobutane - - IIA nonane 205 T3 IIA
cyclohexane 259 T3 IIA nonanol - - IIA
cyclohexanol 300 T2 IIA octaidehyde - - IIA
cyclohexanone 419 T2 IIA octanol - - IIA
cyclohexene (310) (T2) IIA paraformaldehyde 300 T2 IIB
cyclohexylamine 290 T3 IIA paraldhyde 235 T3 IIA
cyclopropane 495 T1 IIB pentane 285 T3 IIA
decahydronaphthalene 260 T3 IIA pentanol300 T2 IIA
diacetone alcohol 640 T1 IIA petroleum 220 T3 IIA
diaminoethane 385 T2 IIA phenol 605 T1 IIA
diamyl ether 170 T4 IIA propane 470 T1 IIA
dibutyl ether 185 T4 IIB propanol405 T2 IIA
dichlorobenzene (640) (T1) IIA propylamine (320) (T2) IIA
dichloroethane 440 T2 IIA propylene (455) (T1) IIA
dichloroethylene (440) (T2) IIA propyl methyl ketone 505 T1 IIA
dichloropropane 555 T1 IIA pyridine 550 T1 IIA
diesel fuel 220 T3 IIA styrene 490 T1 IIA
diethylamine (310) (T1) IIA tetrahydrofuran (260) (T3) IIB
diethylaminoethanol - - IIA tetrahydrofurfuryl alcohol 280 T3 IIB
diethyl ether 170 T4 IIB toluene 535 T1 IIA
diethyl oxalate - - IIA toluidine 480 T1 IIA
diethyl sulphate - - IIA toluol 535 T1 IIA
dihexyl ether 185 T4 IIA triethylamine - - IIA
di-isobutylene (305) (T2) IIA trimrthylamine (190) (T4) IIA
dimethylamine (400) (T2) IIA trimethylbenzene 470 T1 IIA
dimethylaniline 370 T2 IIA trioxane 410 T2 IIB
dimethyl ether - - IIB turpentine 254 T3 IIA
dipropyl ether - - IIB xylene 464 T1 IIA
dioxane 379 T2 IIB
epoxypropane 430 T2 IIB

Combustible Compounds Reference
Combustible dust-air mixtures have dif- ture). It is therefore the owner’s job to ensure
1-11
ferent ignition temperatures. The sur- that the cleaning and maintenance intervals of
face temperature of the equipment in installations with a dust risk are scheduled so
areas with a risk of dust explosion may that no dust layers thicker than 5mm are al-
reach 2/3rd of the minimum ignition lowed to form. At higher dust deposits the min-
temperature of the surrounding dust-air imum ignition temperature (glow temperature)
mixture at the maximum and with a of the dusts are reduced dramatically. Exam-
5mm thick layer of dust must be at least ples for the ignition and glow temperatures
780K below the minimum ignition tem- can be taken from the table below.
perature of the dust (glow tempera-
Minimum Ignition Temperature

Dust Type Minimum Ignition Temperature
of a Dust Layer
(name of solid) of a Dust Cloud
(glow temperature) in acc. with IEC61241-2-1 proc. B
in acc. with IEC61241-2-1 proc. A
Natural Product Examples

Cellulose 370 500
Coal 270 590
Cocoa 460 580
Cork 300 470
Cotton 350 560
Flour 470 410
Fodder 295 520
Grain 290 420
Milk Powder (Full Spray) 330 520
Paper 335 570
Peat 320 500
Sawdust 300 400
Starch 530 380
Sugar 360 450
Tea 300 510
Tobacco 300 450
Chemical Technical Product Examples
Laminate (grinding dust) 330 510
Petrol coke 280 690
Polyvinyl acetate 340 500
Polyvinyl chloride 430 680
Rubber 220 460
Soot 385 620
Sulphur 280 280
Metal Examples
Aluminium 280 530
Bronze 260 390
Iron 300 310
Magnesium 410 610
Manganese 285 330
Zinc 440 570

Area Classifications - Comparison
Classification Comparison Table
1-12
IEC
IEC & NEC NEC
Australia
Zone 0
Class 1,
Liquids, Gases & Vapours Zone 1
Div 1
Zone 2
Zone 20
Class 2,
Dusts & Fibres Zone 21
Div 1, Div 2
Zone 22
Zone 20
Flyings Zone 21 Class 3
Zone 22
Area Groups Comparison Table
GAS GROUP
Representative Gas
NEC IEC
A IIC Acetylene
B IIB H2 Hydrogen
C IIB Ethylene
D IIA Propane
Methane
DI I
(underground mining)

International Standards Reference Table
1-13
Protection Australian Cenelec
IEC Standard
Technique Standard Standard
AS/NZS60079.0 EN60079-0 IEC60079-0

AS2380.1 Electrical apparatus for potentially Electrical apparatus for explosive
GENERAL Electrical equipment for explo- explosive atmospheres gas atmospheres
sive gas atmospheres General Requirements Part 0 - General Requirements
AS/NZS60079.1 IEC60079-1
AS2380.2 EN60079-1 Electrical apparatus for explosive
Electrical equipment for Electrical apparatus for poten- gas atmospheres
Exd explosive tially explosive atmospheres Construction & verification test of
gas atmospheres Flameproof Enclosure ‘d’ flameproof enclosures of electrical
Flameproof Enclosure ‘d’ apparatus
AS/NZS60079.2
IEC60079-2
AS2380.4 EN60079-2
Electrical apparatus for explosive
Electrical equipment for explo- Electrical apparatus for poten-
Exp gas atmospheres
sive gas atmospheres tially explosive atmospheres
Electrical apparatus -
Pressurised Rooms Pressurised Enclosure ‘p’
type of protection ‘p’
or Pressurised Enclosures ‘p’
AS/NZS60079.5 EN60079-5 IEC60079-5

Electrical equipment for explo- Electrical apparatus for poten- Electrical apparatus for explosive
Exq sive gas atmospheres tially explosive atmospheres gas atmospheres
Powder Filling ‘q’ Powder Filling ‘q’ Powder Filling ‘q’
AS/NZS60079.7
EN60079-7 IEC60079-7
AS2380.6
Electrical apparatus for poten- Electrical apparatus for explosive
Exe Electrical equipment for explo-
tially explosive atmospheres gas atmospheres
sive gas atmospheres
Increased Safety ‘e’ Intrinsic Safety ‘e’
Increased Safety ‘e’
AS/NZS60079.11
EN60079-11 IEC60079-11
AS2380.7
Electrical apparatus for poten- Electrical apparatus for explosive
Exi Electrical equipment for explo-
tially explosive atmospheres gas atmospheres
sive gas atmospheres
Intrinsic Safety ‘i’ Increased Safety ‘i’
Intrinsic Safety ‘i’
AS/NZS60079.15 EN60079-15 IEC60079-15
Electrical equipment for explo- Electrical apparatus for explosive Electrical apparatus for explosive
Exn sive gas atmospheres. Explosion gas atmospheres gas atmospheres
protection techniques Electrical apparatus with Electrical apparatus with
Type of protection ‘n’ non sparking type of protection ‘n’ type of protection ‘n’
AS/NZS60079.18 EN60079-18 IEC60079-18

Electrical equipment for explo- Electrical apparatus for poten- Electrical apparatus for explosive
Exm sive gas atmospheres tially explosive atmospheres gas atmospheres
Type of protection ‘m’ Encapsulation ‘m’ Encapsulation ‘m’
AS/NZS61241.1 EN61241-1 IEC61241-1

Electrical equipment for explo- Electrical apparatus for use in the Electrical apparatus for use in
ExtD sive dust atmospheres presence of combustible dust the presence of combustible dust
Electrical apparatus protected by Electrical apparatus protected by Electrical apparatus protected by
enclosures enclosures enclosures
AS60529 EN60529 IEC60529

Electrical apparatus for use in Specification for degrees of pro- Classification of degrees of
IP the presence of combustible dust tection provided by enclosures protection provided by enclosures
(IP Code) (IP Code)

CEAG IEC Ex Approved Products - CEAG 805 Catalogue
Ref No. IEC Ex

Product Description Zones
1-14
CEAG 805 Cat Certificate No.
1 2 21 / 22
GHG960 Exe FRP glands & plugs √ √ √ 8.2 to 8.6 IECEx PTB 05.0004X
Capri ADE series metal glands √ √ √ 8.10 to 8.18 IECEx LCI 05.0004X
GHG273 series lighting switches √ √ √ 9.4 to 9.5 IECEx BKI 07.0036
GHG791 series small JB √ √ √ 7.4 to 7.7 IECEx BKI 07.0034
GHG791 series small JB with terminals √ √ √ 7.12 to 7.14 IECEx BKI 07.0034
GHG7311 & GHG7312 terminal boxes √ √ √ 7.14 to 7.16 IECEx BKI 05.0004
GHG72100 & GHG72110 terminal boxes √ √ √ 7.17 to 7.19 IECEx BKI 05.0005
GHG74 series terminal boxes √ √ √ 7.20 to 7.25 IECEx BKI 05.0006
GHG723 series light alloy terminal boxes √ √ √ 7.28 to 7.31 IECEx BKI 07.0034
C30 & C31 small JB in aluminum √ √ √ 7.23 to 7.35 IECEx BKI 07.0026
NXTS stainless steel JB √ √ √ 7.38 to 7.47 IECEx BKI 08.0010
Ex-Cell stainless steel JB √ √ √ 7.48 to 7.61 IECEx BKI 08.0004
STB stainless steel JB √ √ √ 7.62 to 7.69 IECEx BKI 08.0010
GHG74 stainless steel series terminal boxes √ √ √ 7.70 to 7.71 IECEx BKI 05.0006
GHG791 motor terminal boxes √ √ √ 7.72 to 7.73 IECEx BKI 07.0034
GHG411 series push button control stations in FRP √ √ √ 9.6 to 9.12 IECEx BKI 04.0003
GHG432/4 series push button control stations FRP √ √ √ 9.13 to 9.19 IECEx BKI 04.0003
GHG413 series push button control stations in light alloy √ √ √ 9.20 to 9.24 IECEx BKI 04.0003
GHG414 series push button control stations in SS √ √ √ 9.26 to 9.30 IECEx BKI 04.0003
GHG44 series push button control stations FRP √ √ √ 9.42 to 9.45 IECEx BKI 07.0023
GHG44X33 series push button control stations SS √ √ √ 9.48 to 9.78 IECEx BKI 07.0023
GHG292/ 293 RCU in FRP √ √ √ 9.112 to 9.118 IECEx BKI 07.0011
GHG295 / 294 RCU in light alloy √ √ √ 9.120 to 9.125 IECEx BKI 07.0011
ESF - Nortem control stations √ √ √ 9.126 to 9.127 IECEx BKI 07.0027
GHG61 distribution panel in FRP √ √ √ 11.2 to 11.11 IECEx BKI 06.0007
GHG61 distribution panel in SS √ √ √ 11.12 to 11.15 IECEx BKI 06.0007
GHG61 components - breakers √ √ √ 11.16 to 11.29 IECEx BKI 07.0038U
GHG61 components - fuse √ √ √ 11.30 to 11.31 IECEx BKI 07.0035U
GHG61 components - isolators 20 - 180A √ √ √ 11.32 to 11.33 IECEx BKI 06.003/4/6U
GHG61 components - contactors √ √ √ 11.34 to 11.36 IECEx BKI 06.0038U
GHG61 components - DOL √ √ √ 11.37 to 11.39 IECEx BKI 06.0038U
GHG61 components - contactors √ √ √ 11.40 to 11.43 IECEx BKI 06.0038U
GHG61 components - manual motor starter √ √ √ 11.48 to 11.50 IECEx BKI 06.0038U
GHG61 components - thermal over current relay √ √ √ 11.51 to 1152 IECEx BKI 06.0038U
GHG61 components - over voltage arrestor √ √ √ 11.53 to 11.54 IECEx BKI 06.0038U
GHG61 components - star-delta timer relay √ √ √ 11.55 to 11.55 IECEx BKI 06.0038U
GHG61 components - multi-function relay √ √ √ 11.56 to 11.57 IECEx BKI 06.0038U
GHG61 empty enclosures FRP (not for sale as stand alone item) √ √ √ 11.60 to 11.61 IECEx BKI 06.0007
GHG61 empty enclosures SS (not for sale as stand alone item) √ √ √ 11.62 to 11.63 IECEx BKI 06.0007
EJB Nortem enclosure IIB, IP65 √ √ √ 11.74 to 11.85 IECEx BKI 07.0018

CEAG IEC Ex Approved Products - CEAG 805 Catalogue
Ref No. IEC Ex

Product Description Zones
1-15
CEAG 805 Cat Certificate No.
1 2 21 / 22
Stabex Mini hand torch light √ √ √ 1.6 to 1.9 IECEx BKI 08.002
Stabex HF hand torch light √ √ √ 1.6 to 1.9 IECEx BKI 08.003
eLLK92 series zone 1, 2, 21 & 22 fluorescent light √ √ √ 2.13 to 2.25 IECEx BVS-09.0033
eLLB200 series recessed fluorescent light √ √ √ 2.26 to 2.37 IECEx BKI 08.0017
AB12 EX d series fluorescent light √ √ √ 2.47 to 2.5 IECEx BKI 07.0008X
EVF Ex d series fluorescent light √ √ 2.51 to 2.54 IECEx BKI 07.0033X
nLLK98 series zone 2, 21, 22 fluorescent √ √ 2.56 to 2.61 IECEx BKI 06.0001
EXIT N - LED emergency EXIT Light √ √ √ 3.8 to 3.15 IECEx BKI 06.0003
AB12 Ex d NAV 70, 70W HPS √ √ 5.8 to 5.9 IECEx BKI 07.0008X
AB51 Ex d pendant light fitting for Incandescent, halogen & MV √ √ √ 5.13 to 5.14 IECEx BKI 07.0028X
EVI 200 / EVI 500 Ex d Incandescent and HID to 250W

5.15 to 5.17 IECEx BKI 07.0031X
minus control gear
√ √ √
EVQ Ex d Induction lamp EQ55 and EQ85 √ √ √ 5.18 to 5.19 IECEx BKI 07.0031X
EV Ex d HID well glass series with integral control gear √ √ √ 5.20 to 5.22 IECEx BKI 07.0031X
FZD Ex d light weight HID floodlight with integral control gear √ √ √ 5.24 to 5.29 IECEx BKI 07.0002
PX Ex d HID flood HID with integral control-gear √ √ √ 5.30 to 5.33 IECEx BKI 07.0041
KFL Vessel light √ √ √ 5.46 to 5.48 IECEx BKI 07.0029
Ex-Link plugs and receptacles √ √ √ 6.6 to 6.44 IECEx BKI 06.0005X
GHG511 series 16A Plugs & Sockets √ √ √ 6.58 to 6.67 IECEx BKI 04.0002

Fittings
When it comes to the proper termination of cable,

the correct use of fittings is as important as the equipment
itself. Incorrect application will render the installation
ineffective and could be dangerous.
Our range of certified adaptors, reducers, conduit seals
and glands provides the hazardous and arduous indus-
tries with a wide selection to suit many applications.
Crouse-Hind’s fittings are available in Nickel plated brass
as standard and on request, in stainless steel.

Fittings
Cable Glands
CH Nylon Weatherproof ..................................................2-2
TUA Unarmoured Weatherproof......................................2-3
TWA Steel Wire Armoured Weatherproof........................2-4
ADE1F Ex d, Ex e, Ex tD Steel Wire Armoured ..........2-5
TWAB Ex d, Ex e, Ex tD Steel Wire Armoured ..........2-6
TWAE Ex e, Ex tD Steel Wire Armoured ..................2-7
TWAX Ex d, Ex e, Ex tD Steel Wire Armoured ........2-8
ADE4F Exd, Ex e, Ex td Steel Wire Armoured ........2-9
2-1
Cable Gland Accessories ....................................2-10
Stopping Plugs
Ex d, Ex e DIP ................................................................2-11
Adaptors
Ex d, DIP ........................................................................2-12
Reducers
Ex d, DIP ........................................................................2-16
Unions
Ex d, DIP ........................................................................2-17
Nipples
Ex d, DIP ........................................................................2-18
Conduit Seals
Ex d, DIP ........................................................................2-19
Sealing Compound
Sealing Compound ........................................................2-20
Inspection Elbows & Tees

Exd, DIP ........................................................................2-21

Fittings - CH Nylon Cable Glands
Technical Data
Type of Protection Weatherproof
Degree of Protection IP68
Application Termination of unarmoured cables
Standard Materials Nylon
2-2
Ordering Details
Gland Data Size Cable Range Detail Gland Size Data
Cable Entry Proj.

Overall Diameter Length Length
Entry Size
Cat No.
(metric) Min Max A B
mm mm mm mm
B
CH12 12 3.0 6.5 7.9 19.3
CH16 16 5.0 10.0 14.4 23.9
CH20 20 10.0 14.0 12.8 28.2
CH25 25 13.0 18.0 13.9 32.1

A
CH32 32 18.0 25.0 14.6 36.2
CH40 40 22.0 32.0 17.7 43.1
CH50 50 30.0 38.0 17.3 44.3
CH63 63 34.0 44.0 18.6 50.7

Fittings - TUA Terminator ® Cable Glands
Technical Data
Degree of Protection IP66/67
Standard Materials Brass, nickel plated

Stainless steel
(add suffix SS to part no.,
2-3
Options minimum order qty’s applicable)
Other thread types available upon request
Ordering Details
Gland Size Data Gland Size Data
Cable Hexagon Size
Overall Across Across

Entry Size Diameter Flats Cnrs
Cat No.
(metric)
Min Max A B C D
mm mm mm mm mm mm
TUA12M6 12 3.5 6.5 5.0 11.0 12.0 14.0
TUA16M9 16 5.5 9.5 6.0 13.0 16.0 18.0
TUA1M13 20 8.5 13.0 6.0 14.0 20.0 22.0
TUA2M17 25 12.0 17.0 7.0 16.0 25.0 27.0
TUA3M22 32 15.0 22.0 8.0 20.0 32.0 35.0
TUA4M28 40 19.5 28.0 8.0 23.0 40.0 44.0
TUA5M36 50 25.5 36.0 9.0 27.0 50.0 54.0
TUA6M46 63 33.0 46.0 10.0 32.0 63.0 67.0
TUA7M53 75 37.0 53.0 18.0 41.4 80.0 85.0

Fittings - TWA Terminator ® Cable Glands
Technical Data
Application Termination of steel wire armoured cables

Stainless steel
2-4
Ordering Details
Gland Size Data Cable Range Detail Gland Size Data
Approx. Hexagon Size

Actual Diameter Wire
Armour Pro-
Entry Entry Entry Across Across
Diameter jected
Cat No. Size Cat No. Size Under Armour Overall Length Flats Cnrs
Length
(metric) (NPT)
Min Max Min Max Min / Max A B C D
mm mm mm mm mm mm mm mm mm
TWA1M13 20 TWA1N13 1/2" 3.0 8.0 8.0 13.0 0.5 / 0.9 14.0 56.0 27.0 31.0
TWA1M16 20 TWA1N16 1/2" 6.0 11.0 10.2 15.8 0.9 / 1.25 14.0 58.0 27.0 31.0
TWA1M20 20 TWA1N20 1/2" 7.0 13.0 14.0 20.8 0.9 / 1.25 14.0 58.0 30.4 34.0
TWA2M27 25 TWA2N27 3/4" 11.0 19.0 18.0 27.2 1.25 / 1.6 16.0 60.0 38.5 43.0
TWA3M34 32 TWA3N34 1" 17.0 25.0 25.0 33.5 1.6 / 2.0 20.0 72.0 47.2 53.0
TWA4M40 40 TWA4N40 1 1/4" 24.0 31.0 30.0 39.5 1.6 / 2.0 20.0 74.0 57.0 64.0
TWA5M53 50 TWA5N53 1 1/2" 30.0 41.0 36.0 52.6 2.0 / 2.5 20.0 82.0 70.0 78.0
TWA6M66 63 TWA6N66 2" 40.0 54.0 51.0 65.3 2.0 / 2.5 22.0 90.0 80.0 88.0
TWA7M78 75 TWA7N78 2 1/2" 53.0 65.0 63.0 78.0 2.5 / 3.5 22.0 98.0 101.0 112.0

Fittings - ADE1F Terminator ® Cable Glands
Technical Data
Zone 1 Zone 2 Zone 21/22
Type of Protection Ex d, Ex e, Ex tD
Gas Group IIC
Approvals IEC Ex LCI 050 004X

2-5
Stainless steel
Ordering Details
Gland Size Data Gland Size Data
Cable Approx. Hexagon Size
Overall Entry Projected Across Across

Entry Size Diameter Length Length Flats Cnrs
Cat No.
(metric)
Min Max A B C D
mm mm mm mm mm mm
ADE1FISO204 M20 4.0 8.5 15.0 20.0 15.0 24.0
ADE1FISO205 M20 6.0 12.0 15.0 20.0 19.0 24.0
ADE1FISO257 M25 12.0 20.5 15.0 27.0 30.0 30.0
ADE1FISO328 M32 16.0 27.5 15.0 34.0 41.0 41.0
ADE1FISO409 M40 21.0 34.0 15.0 36.0 48.0 48.0
ADE1FISO5010 M50 27.0 41.0 16.0 39.0 55.0 55.0
ADE1FISO6312 M63 40.0 56.0 17.0 43.0 72.0 72.0
ADE1FISO5713 M75 47.0 65.0 18.0 49.0 85.0 85.0
ADE1FISO8014 M80 54.0 73.0 20.0 56.0 95.0 95.0
ADE1FISO9015 M90 63.0 82.0 22.0 61.0 110.0 110.0
ADE1FISO1006 M100 72.0 92.0 22.0 62.0 120.0 120.0

Fittings - TWAB Terminator ® Cable Glands
Technical Data
Gas Group IIC
Approvals IEC Ex TSA09.0024
2-6 Application Termination of steel wire armoured cables

Stainless steel
Ordering Details
Wire Hexagon Size

Actual Diameter Approx (mm)
Catalogue Entry Catalogue Entry Armour (mm)
(mm)
No. Size No. Size Diameter Entry Projected Across Across
(mm) Length Length Flats Cnrs
Under Armour Overall
Cat. No. Metric Cat. No. NPT Min Max Min Max Min/Max A B C D
TWAB1M13 20 TWAB1N13 1/2" 6 8 7 13.2 0.9/1.25 14 56 23.3 26
TWAB1M16 20 TWAB1N16 1/2" 6 8 10.2 15.8 0.9/1.25 14 56 27 31
TWAB1M20 20 TWAB1N20 1/2" 7 12 15.5 20.8 0.9/1.25 14 56 30.5 35.2
TWAB2M27 25 TWAB2N27 3/4" 11 18 20 27.2 1.25/1.6 16 56 38.5 44.5
TWAB3M34 32 TWAB3N34 1" 17 25 27 33.5 1.6/2 20 66 47.6 54
TWAB4M40 40 TWAB4N40 1 1/4" 24 31 32 39.9 1.6/2 20 71 55 65.8
TWAB5M53 50 TWAB5N53 1 1/2" 30 41 43 52.6 2/2.5 20 75 70 80.8
TWAB6M66 63 TWAB6N66 2" 40 54 53 65.3 2/2.5 22 85 80 92.4
TWAB7M78 75 TWAB7N78 2 1/2" 53 65 63 78 2.5/3.15 24 100 101 116.6
TWAB8M88 85 -- -- 60 74 77 88 2.5/3.15 24 100 111 122

Fittings - TWAE Terminator ® Cable Glands
Technical Data
Type of Protection Ex e, Ex tD
Gas Group IIC
Application Termination of steel wire armoured cables

2-7
Stainless steel
Ordering Details
Wire Hexagon Size

(mm)
TWAE1M13 20 TWAE1N13 1/2" 6 8.6 7 13.2 0.9/1.25 14 62 23.3 26
TWAE1M16 20 TWAE1N16 1/2" 6 12 10.2 15.8 0.9/1.25 14 66 27 31
TWAE1M20 20 TWAE1N20 1/2" 7 14 15.5 20.8 0.9/1.25 14 66 30.5 35.2
TWAE2M27 25 TWAE2N27 3/4" 11 19 20 27.2 1.25/1.6 16 68 42.4 49
TWAE3M34 32 TWAE3N34 1" 17 25 27 33.5 1.6/2 20 80 47.6 55
TWAE4M40 40 TWAE4N40 1 1/4" 24 31 32 39.9 1.6/2 20 80 55 65.8
TWAE5M53 50 TWAE5N53 1 1/2" 30 41 43 52.6 2/2.5 20 88 69.8 80.8
TWAE6M66 63 TWAE6N66 2" 40 54 53 65.3 2/2.5 22 95 80 92.4
TWAE7M78 75 TWAE7N78 2 1/2" 53 65 63 78 2.5/3.15 24 105 101 116.6
TWAE8M88 85 -- -- 60 74 77 88 2.5/3.15 24 107 111 122

Fittings - TWAX Terminator ® Cable Glands
Technical Data
Gas Group IIC
2-8 Application Termination of steel wire armoured cables

Stainless steel
Ordering Details
Wire Hexagon Size

(mm)
TWAX16M13 16 6.3 8.6 10.2 13.2 09/1.25 14 52 23.3 26.9
TWAX1M13 20 TWAX1N13 1/2" 6.3 8.6 10.2 13.2 0.9/1.25 14 52 23.3 26.9
TWAX1M16 20 TWAX1N16 1/2" 8.4 11.6 13 15.8 0.9/1.25 14 52 30.5 35.2
TWAX1M20 20 TWAX1N20 1/2" 11 13.9 15.5 19.8 0.9/1.25 14 62 30.5 35.2
TWAX2M24 25 TWAX2N24 3/4" 13.5 16.9 19.5 23.8 1.25/1.6 16 67 33.3 38.4
TWAX2M27 25 TWAX2N27 3/4" 16.5 19.9 23.5 27.2 1.25/1.6 16 71 38.5 44.4
TWAX3M30 32 TWAX3N33 1" 19.5 23.9 27 30.5 1.6/2 20 80 42.4 48.7
TWAX3M33 32 TWAX3N43 1" 23.5 26.2 30 33.5 1.6/2 20 95 47 54.3
TWAX4M38 40 TWAX4N38 1 1/4" 25.8 31.2 33 38.5 1.6/2 20 52 57 65.8
TWAX5M43 50 TWAX5N43 1 1/2" 30.8 36.2 38 43.5 2/2.5 20 52 57 65.8
TWAX5M48 50 TWAX5N48 1 1/2" 35.5 40 43 48.5 2/2.5 20 52 63.5 73.3
TWAX5M52 50 TWAX6N52 1 1/2" 39.5 44 48 52.6 2/2.5 20 62 70 80.8
TWAX6M60 63 TWAX6N60 2" 43.5 49 52 58.9 2/2.5 22 67 76.2 87.9
TWAX6M65 63 TWAX7N765 2 1/2" 48.5 55.9 58 65.3 2/2.5 22 71 80 92.4
TWAX7M71 75 TWAX7N71 2 1/2" 55 61.9 64.3 71.6 2.5/3.15 24 80 88.9 102.6
TWAE7M78 75 TWAX8N78 3" 61 67.9 70.6 78 2.5/3.15 24 95 101 116.6

Fittings - ADE4F Terminator ® Cable Glands
Technical Data
Gas Group IIC
Approvals IEC Ex LCI 050 004X
Application
Termination of steel wire armoured,
metallic tape & braided cables 2-9
Stainless steel
Ordering Details
Approx. Hexagon Size

Actual Diameter Wire Armour
Diameter Entry Projected Across Across
Entry Size Length Length Flats Cnrs
Cat No. Under Armour Overall
(metric)
Min Max Min Max Min / Max A B C D
mm mm mm mm mm mm mm mm mm
ADE4FISO205 M20 4.0 8.5 6.0 12.0 0/0.9 15.0 36.0 19.0 24.0
ADE4FISO207 M20 8.5 15.5 12.0 21.0 0/1.25 15.0 46.0 30.0 30.0
ADE4FISO258 M25 12.0 20.5 16.0 27.5 0/1.6 15.0 56.0 41.0 41.0
ADE4FISO329 M32 16.0 27.5 21.0 34.0 0/1.6 15.0 63.0 48.0 48.0
ADE4FISO4010 M40 21.0 34.0 27.0 41.0 0/2.0 15.0 68.0 55.0 55.0
ADE4FISO5011 M50 27.0 41.0 33.0 48.0 0/2.5 16.0 74.0 64.0 64.0
ADE4FISO6312 M63 33.0 48.0 40.0 56.0 0/2.5 17.0 77.0 72.0 72.0
ADE4FISO6313 M63 40.0 56.0 47.0 65.0 0/2.5 17.0 85.0 85.0 85.0
ADE4FISO7514 M75 47.0 65.0 54.0 74.0 0/2.25 18.0 92.0 95.0 95.0
ADE4FISO8015 M80 54.0 73.0 63.0 83.0 0/3.15 20.0 104.0 110.0 110.0
ADE4FISO9016 M90 63.0 82.0 72.0 93.0 0/3.15 22.0 108.0 120.0 120.0

Fittings - Terminator ® Cable Glands - Accessories
Accessories
Lock Nuts
Shrouds
Locknuts are used to secure cable glands to the
Suits Gland Cat No.
enclosure with slip hole entries.
TUA1M10, TUA1M12, TUA1M15, TWA1M13,
506050
Metric Entry NPT Entry TWAX1M13 & Capri size 5 glands
Cat No. Cat No.
Dia (mm) DIa (mm)
TWA1M16, TWAX1M16, TWAE1M16,
20 LNM1NP 1/2" LNN1NP 506060
2-10
TWAB1M16 & Capri size 6 glands
25 LNM2NP 3/4" LNN2NP
TWA1M20, TWAE1M20, TWAX1M20
506070
32 LNM3NP 1" LNN3NP & Capri size 7 glands
40 LNM4NP 1 1/4" LNN4NP TUA3M23, TWA2M27, TWAE2M27, TWAX2M27,

TWAB2M27, TUA2M18, TWAX2M24 506080
50 LNM5NP 1 1/2" LNN5NP TUA3M25, TWAX3M30 & Capri size 8 glands
63 LNM6NP 2" LNN6NP

TWA3M34, TWAE3M34, TWAX3M33,
506090
75 LNM7NP 2 1/2" LNN7NP TWAB3M34 & Capri size 9 glands
80 LNM8NP 3" LNN8NP TUA5M34, TWA4M40, TWAE4M40, TWAX4M38,

5060100
TUA5M38, TUA5M42, TWAX5M52

TUA6M48, TWAX5M52, TWAB5M53 5060110
Sealing Gaskets & Capri size 11 glands
Sealing Gaskets are required to maintain the IP rating of an TWA5M53, TWAE5M53, TWAX6M60,
5060120
enclosure. Sealing Gaskets should be installed outside the TWAB6M66 & Capri size 12 glands
enclosure between the gland face and the enclosure.
TUA6M54, TUA7M60, TWA6M66,
Metric Entry NPT Entry TWAE6M66, TWAX7M71 & Capri size 13 5060130
Cat No. Cat No. glands
Dia (mm) DIa (mm)
20 SGM1 1/2" SGN1 TWA7M78, TWAE7M78, TWAX7M78,
5060140
25 SCM2 3/4" SGN2
32 SGM3 1" SGN3
40 SGM4 1 1/4" SGN4 Earth Tags
50 SGM5 1 1/2" SGN5 Earth tags are used when it is necessary

to connect an earth wire to the cable gland
63 SGM6 2" SGN6
to maintain the earth continuity.
75 SGM7 2 1/2" SGN7
Metric Entry NPT Entry
Cat No.
80 SGM8 3" SGN8 Dia (mm) DIa (mm)
20 1/2" ET1
25 3/4" ET2
Epoxy Sealing Compound 32 1" ET3
40 1 1/4" ET4
Epoxy sealing compound is supplied with all
TWAB glands. Additional sealing compound may 50 1 1/2" ET5
be ordered if required.
Qty 63 2" ET6
Net Weight Cat No.
Per Ctn
75 2 1/2" ET7
30 gms 10 706948
80 3" ET8
120gms 5 706949

Fittings - Stopping Plugs
Technical Data
PL* - Ex d, DIP A21, IP67

Type of Protection
GHG - Exe
Gas Group IIC
2-11
PL* - Ex1108U
Approvals
GHG - IECEx PTB03-0000
To safely seal unused threaded entries
Application
& clearance holes
PL* - Brass, nickel plated
Standard Materials
GHG - Polyamide body, neoprene seal
Stainless steel - MOQ applicable
Options
(replace NP with SS - PL* only)
Ordering Details
Exd Stopping Plug Selection
Entry Size Entry Size Entry Size

Cat No. Cat No. Cat No.
(metric) (NPT) (BSP)
PLM1NP 20mm PLN1NP 1/2" NPT PLB1NP 1/2" BSP
PLM2NP 25mm PLN2NP 3/4" NPT PLB2NP 3/4" BSP
PLM3NP 32mm PLN3NP 1" NPT PLB3NP 1" BSP
PLM4NP 40mm PLN4NP 1 1/4" NPT PLB4NP 1 1/4" BSP
PLM5NP 50mm PLN5NP 1 1/2" NPT PLB5NP 1 1/2" BSP
PLM6NP 63mm PLN6NP 2" NPT
PLN7NP 2 1/2" NPT
Exe Stopping Plug Selection
Entry Size
Cat No.
(metric)
GHG9601952R0112 M20
GHG9601952R0003 M25
GHG9601952R0004 M32
GHG9601952R0005 M40
GHG9601952R0006 M50

Fittings - Adaptors
Technical Data
Type of Protection Ex d, DIP A21, IP67
Gas Group IIC
Approvals Ex1108U
2-12
Application Thread type and / or size conversion
Stainless steel - MOQ applicable

Options
(replace NP with SS)
Ordering Details
A M N 2 2 N P
Male Thread Nickel Plated
Size Adapted TO SS for
Product (Female) stainless steel
Female Thread
Identifier Thread Size Code
A - Adaptor
Size Adapted
FROM (Male)
Thread Size Code
M - Metric
N - NPT
B - BSP
Thread Size Code
Code Metric NPT
No. or BSP
16 16mm -
1 20mm 1/2"
2 25mm 3/4"
3 32mm 1"
4 40mm 1 1/4"
5 50mm 1 1/2"
6 63mm 2"
7 - 2 1/2"
Please consult factory for availability
Description Cat No.
3/4" BSP (M) - 1/2" BSP (F) ABB21NP

3/4" BSP (M) - 1" BSP (F) ABB23NP
1" BSP (M) - 3/4" BSP (F) ABB32NP
1" BSP (M) - 1 1/4" BSP (F) ABB34NP
1" BSP (M) - 1 1/2" BSP (F) ABB35NP
1 1/4" BSP (M) - 2" BSP (F) ABB46NP

Fittings - Adaptors
Ordering Details
Description Cat No.
1" BSP (M) - M16 (F) ABM116NP

1/2" BSP (M) - M20 (F) ABM11NP
3/4" BSP (M) - M20 (F) ABM21NP
3/4" BSP (M) - M25 (F) ABM22NP
3/4" BSP (M) - M32 (F) ABM23NP
2-13
1" BSP (M) - M20 (F) ABM31NP
1" BSP (M) - M25 (F) ABM32NP
1" BSP (M) - M32 (F) ABM33NP
1 1/4" BSP (M) - M25 (F) ABM42NP
1 1/4" BSP (M) - M32 (F) ABM43NP
1 1/2" BSP (M) - M20 (F) ABM51NP
1 1/2" BSP (M) - M25 (F) ABM52NP
1 1/2 BSP (M) - M32 (F) ABM53NP
1 1/2" BSP (M) - M40 (F) ABM54NP
1 1/2" BSP (M) - M50 (F) ABM55NP
2" BSP (M) - M32 (F) ABM63NP
2" BSP (M) - M50 (F) ABM65NP
2 1/2" BSP (M) - M50 (F) ABM75NP
3/4" IMP (M) - M16 (F) AIM116NP

3/4" IMP (M) - M20 (F) AIM11NP
3/4" IMP (M) - M25 (F) AIM12NP
5/8" IMP (M) - M20 (F) AIM161NP
1" IMP (M) - M20 (F) AIM21NP
1" IMP (M) - M25 (F) AIM22NP
1 1/4" IMP (M) - M20 (F) AIM31NP
1 1/4" IMP (M) - M25 (F) AIM32NP
1 1/4" IMP (M) - M40 (F) AIM34NP
1 1/2" IMP (M) - M32 (F) AIM43NP
1 1/2" IMP (M) - M40 (F) AIM44NP
2" IMP (M) - M32 (F) AIM53NP

2 1/4" IMP (M) - M50 (F) AIM65NP
M20 (M) - 1/2" BSP (F) AMB11NP

M20 (M) - 3/4" BSP(F) AMB12NP
M20 (M) - 1" BSP (F) AMB13NP
M25 (M) - 1/2" BSP (F) AMB21NP
M25 (M) - 3/4" BSP (F) AMB22NP
M25 (M) - 1" BSP (F) AMB23NP
M32 (M)- 1 1/4" BSP (F) AMB34NP
M40 (M)- 1 1/2" BSP (F) AMB45NP

Fittings - Adaptors
Ordering Details
Description Cat No.
M20 (M)- 5/8" IMP (F) AMI116NP

M20 (M) - 3/4" IMP (F) AMI11NP
M20 (M) - 1" IMP (F) AMI12NP
M25 (M) - 3/4" IMP (F) AMI21NP
M25 (M)- 1" IMP (F) AMI22NP
2-14
M32 (M) - 1" IMP (F) AMI32NP
M32 (M) - 1 1/4" IMP (F) AMI33NP
M40 (M) - 1 1/2" IMP (F) AMI44NP
M20 (M) - M20 (F) AMM11NP

M20 (M) - M25 (F) AMM12NP
M20 (M) - M32 (F) AMM13NP
M16 (M) - M20 (F) AMM161NP
M25 (M) - M25 (F) AMM22NP
M25 (M) - M32 (F) AMM23NP
M32 (M) - M32 (F) AMM33NP
M32 (M) - M40 (F) AMM34NP
M40 (M) - M40 (F) AMM44NP
M40 (M) - M50 (F) AMM45NP
M50 (M) - M50 (F) AMM55NP
M63 (M) - M63 (F) AMM66NP
M20 (M) - 1/2" NPT (F) AMN11NP

M20 (M) - 3/4" NPT (F) AMN12NP
M20 (M) - 1" NPT (F) AMN13NP
M25 (M) - 1/2" NPT (F) AMN21NP
M25 (M) - 3/4" NPT (F) AMN22NP
M25 (M) - 1" NPT (F) AMN23NP
M25 (M) - 1-1/2" NPT (F) AMN25NP
M32 (M) - 3/4" NPT (F) AMN32NP
M32 (M) - 1" NPT (F) AMN33NP

M40 (M) - 1" NPT (F) AMN43NP
M40 (M) - 1 1/4" NPT (F) AMN44NP
M50 (M) - 1" NPT (F) AMN53NP
M50 (M) - 11/4" NPT (F) AMN54NP
M63 (M) - 1 1/4" NPT (F) AMN64NP
M63 (M) - 1 1/2" NPT (F) AMN65NP

Fittings - Adaptors
Ordering Details
Description Cat No.
1/2" NPT (M) - 3/4" IMP (F) ANI11NP

1" NPT (M) - 11/4" (F) ANI33NP
1 1/2" NPT (M) - 1 1/2" IMP (F) ANI54NP
2" NPT (M) - 2" IMP (F) ANI65NP
2-15
1/2" NPT (M) - M16 (F) ANM116NP
1/2" NPT (M) - M20 (F) ANM11NP
1/2" NPT (M) - M25 (F) ANM12NP
1/2" NPT (M) - M63 (F) ANM16NP
3/4" NPT (M) - M20 (F) ANM21NP
3/4" NPT (M) - M25 (F) ANM22NP
3/4" NPT (M) - M32 (F) ANM23NP
1" NPT (M) - M20 (F) ANM31NP
1" NPT (M) - M25 (F) ANM32NP
1" NPT (M) - M32 (F) ANM33NP
1" NPT (M) - M40 (F) ANM34NP
1 1/4" NPT (M) - M20 (F) ANM41NP
1 1/4" NPT (M) - M25 (F) ANM42NP
1 1/4" NPT (M) - M32 (F) ANM43NP
1 1/4" NPT (M) - M40 (F) ANM44NP
1 1/4" NPT (M) - M63 (F) ANM46NP

1 1/2" NPT (M) - M20 (F) ANM51NP
1 1/2" NPT (M) - M25 (F) ANM52NP
1 1/2" NPT (M) - M32 (F) ANM53NP
1 1/2" NPT (M) - M40 (F) ANM54NP
1 1/2" NPT (M) - M50 (F) ANM55NP
2" NPT (M) - M25 (F) ANM62NP
2" NPT (M) - M40 (F) ANM64NP
2" NPT (M) - M50 (F) ANM65NP
2" NPT (M) - M63 (F) ANM66NP
2 1/2" NPT (M) - M50 (F) ANM75NP
2 1/2" NPT (M) - M63 (F) ANM76NP
1/2" NPT (M) - 1/2" NPT (F) ANN11NP

1/2" NPT (M) - 3/4" NPT (F) ANN12NP
1/2" NPT (M) - 1" NPT (F) ANN13NP
3/4" NPT (M) - 1" NPT (F) ANN23NP
3/4" NPT (M) - 1 1/2" NPT (F) ANN25NP
1" NPT (M) - 1 1/4" NPT (F) ANN34NP
1 1/4" NPT (M) - 2" NPT (F) ANN46NP

Fittings - Reducers
Technical Data
Gas Group IIC
Approvals Ex1108U
2-16 Application
Reducers reduce the thread size of metric,
NPT & BSP entries

Stainless steel (replace NP with SS)
Options
BSP thread size (consult factory)
Ordering Details
R E M 3 2 N P
Product Nickel Plated
Identifier Thread Type Size reduced TO SS for
RE - Adaptor (Female) stainless steel
Thread Size Code
Size reduced
FROM (Male)
Thread Size Code
M - Metric
N - NPT Thread Size Code
B - BSP
Code Metric NPT
No. or BSP
16 16mm -
1 20mm 1/2"
2 25mm 3/4"
3 32mm 1"
4 40mm 1 1/4"
5 50mm 1 1/2"
6 63mm 2"
7 - 2 1/2"
Metric Thread NPT Thread
Part No. Description Part No. Description Part No. Description Part No. Description
REM116NP M20 - 16mm (F) REM52NP M50 - M25 (F) REN21NP 3/4" - 1/2" (F) REN53NP 1 1/2" - 1" (F)
REM21NP M25 - M20 (F) REM53NP M50 - M32 (F) REN31NP 1" - 1/2" (F) REN54NP 1 1/2" - 1 1/4" (F)
REM31NP M32 - M20 (F) REM54NP M50 - M40 (F) REN32NP 1" - 3/4" (F) REN61NP 2" - 1/2" (F)
REM32NP M32 - M25 (F) REM61NP M63 - M20 (F) REN41NP 1 1/4" - 1/2" (F) REN62NP 2" - 3/4" (F)
REM41NP M40 - M20 (F) REM62NP M63 - M25 (F) REN42NP 1 1/4" - 3/4" (F) REN63NP 2" - 1" (F)
REM42NP M40 - M25 (F) REM63NP M63 - M32 (F) REN43NP 1 1/4" - 1" (F) REN64NP 2" - 1 1/4" (F)
REM43NP M40 - M32 (F) REM64NP M63 - M40 (F) REN51NP 1 1/2" - 1/2" (F) REN65NP 2" - 1 1/2" (F)
REM65NP M63 - M50 (F) REN52NP 1 1/2" - 3/4" (F) REN76NP 2 1/2" - 2" (F)

Fittings - Unions
Technical Data
Gas Group IIC
Approvals Ex1108U
Application
For ease in coupling stationary Ex d
equipment 2-17
Options
Ordering Details
U N F A 4 M
Product
Identifier
Part No. Description
N P
UN - Union
UNFA1MNP M20 (F) - M20 (F)

Type of Union Nickel Plated UNFA2MNP M25 (F) - M25 (F)
F - Female / Female SS for
Y - Male / Female stainless stee UNFA3MNP M32 (F) - M32 (F)
Thread Size Code
UNFA4MNP M40 (F) - M40 (F)
Code Metric NPT
No. or BSP Thread Type UNFA5MNP M50 (F) - M50 (F)
16 16mm - M - Metric
1 20mm 1/2" N - NPT UNFA6MNP M63 (F) - M63 (F)
2 25mm 3/4" B - BSP
3 32mm 1"
4 40mm 1 1/4"
UNYA1MNP M20 (M) - M20 (F)
5 50mm 1 1/2"
6 63mm 2"
7 - 2 1/2"

UNFA1NNP 1/2" NPT (F) - 1/2" NPT (F)
UNFA2NNP 3/4" NPT (F) - 3/4" NPT (F)
UNYA1NNP 1/2" NPT (M) - 1/2" NPT (F)
UNYA2NNP 3/4" NPT (M) - 3/4" NPT (F)

Fittings - Nipples
Technical Data
Gas Group IIC
Approvals Ex1108U
2-18
Application To connect Ex d equipment or conduit systems

Options
Ordering Details

N H M 3 N P
NHM1NP M20 (M) - M20 (M) hex nipple
Product
Identifier Nickel Plated NHM2NP M25 (M) - M25 (M) hex nipple
N - Nipples SS for
Thread Type
stainless steel
M - Metric NHM3NP M32 (M) - M32 (M) hex nipple
N - NPT
B - BSP NHM4NP M40 (M) - M40 (M) hex nipple
Shape NHM5NP M50 (M) - M50 (M) hex nipple
H - Hexagonal
NHM6NP M63 (M) - M63 (M) hex nipple
Thread Size Code
Code Metric NPT NHMN11NP M20 (M) - 1/2" NPT (M) hex nipple
No. or BSP
NHMN33NP M32 (M) - 1" NPT (M) hex nipple
16 16mm -
1 20mm 1/2"
2 25mm 3/4"
3 32mm 1"
4 40mm 1 1/4"
5 50mm 1 1/2"
6 63mm 2"
7 - 2 1/2"

Fittings - Conduit Seals
Technical Data
Type of Protection Ex d, DIP A21, T600C, IP66
Gas Group IIC
Approvals IEC Ex TSA07.0015-1
Application
Used as cable entry into Ex d enclosures
and between enclosures to prevent flame
2-19
propagation and pressure piling
Standard Materials Brass, aluminium

Stainless steel (SS)
Options
Ordering Details
Conduit Seals Selection
Weight of Weight of
Entry Male
Female Sealing Compound Chico X Fibre
Size & Female
per seal (g) per seal (g)
20mm/20mm EYSA1M EYSA16M 50 1
32mm/32mm EYSA3M EYSA36M 188 3.5
3/4" BSP/3/4" BSP EYSA2B EYSA26B 100 2
20mm/1/2" BSP EYSA11MB - 50 1
20mm/3/4" BSP EYSA12MB - 50 1
25mm/1/2" BSP EYSA21MB - 100 2
25mm/3/4" BSP EYSA22MB - 100 2

Fittings - Sealing Compound
Technical Data
Chico A sealing compound used with

Application EYSA seals prevents flame propagation in
conduit hence avoids pressure piling.
Ordering Details
2-20 Sealing Compound
17620 Sealing compound mixture 0.45kg

Sealing compound mixture A4
19782
c/w Chico X Fibre
228 Sealing compound mixture 2.27kg
Technical Data
Used in horizontal or vertical applications

to form a dam between the integral
Application bushing of the sealing fitting and the end
of the conduit whilst SCM sealing com-
pound is in the liquid state.
Chico X Fibre is ceramic, asbestos-free

fibre that packs easily around each con-
Features
ductor making a suitable dam for the pour-
ing of Chico A sealing compound mixture
Ordering Details
Chico X Selection
5658 Chico X Fibre 60g

Fittings - Inspection Elbows & Tees
Technical Data
Gas Group IIB
Approvals Ex1108U
Used as draw in outlets, inspection elbows

& tees and are especially designed for stiff
2-21
cables due to large size or insulation type
Application
Create 900 bends in conduit systems al-
lowing for a straight pull in either direction
To provide maintenance access to wiring
Body - Copper free aluminium
Standard Materials
Cover - Brass
Options NPT & BSP thread sizes (consult factory)
Ordering Details
Inspection Elbows & Tees Selection
Entry Size
Cat No.
(metric)
FE1 M20 (F)-M20 (F) Elbow
FE2 M25 (F)-M25 (F) Elbow
FT1 M20 (F)-M20 (F) Tee
FT2 M25 (F)-M25 (F) Tee

Junction Boxes
Using correct termination boxes for the task at hand saves cost
and time.
From a small FRP Junction Box to a large Stainless steel mar-
shalling box, Crouse-Hinds has the solution.
Our local Australian JBE stainless steel design is now compli-
mented by our UK designed, dual IECEx and ATEX certified
Ex-cell and STB ranges.
These boxes are custom built and engineered to your
specific requirement, ensuring the right product for your appli-
cation

Junction Boxes
Junction Boxes
GUA - Exd ........................................................................3-2
C30 & C31 - Ex d, Ex tD A21 IP67 T850C ......................3-3
PBEC - Exe, Ex tD A21, T800C ......................................3-5
GUBA - Exd ....................................................................3-6
EJBA - Exd ......................................................................3-7
EJB - Exd ........................................................................3-8
JBEC - Exe......................................................................3-9
JBDC - Combustible Dust ..............................................3-9
JBWC - Weatherproof ....................................................3-9
JBE - Increased Safety..................................................3-10
JBD - Combustible Dust ................................................3-10
JBI - Intrinsically Safe....................................................3-10
JBW - Weatherproof......................................................3-10
XLH - Ex e ia, Ex dem ia/ib, Ex td ................................3-12
PBE - Ex e ....................................................................3-13
3-1

Junction Boxes - GUA
Technical Data
Type of Protection Exd
Gas Group IIC
GUA6 - IEC Ex - Pending

Approvals
GUA9 - ANZEx05.3013
Small pull through box & small junction

Application
box
Standard Materials Copper free aluminium
Ordering Details
3-2 GUA X A 1 6 M
Product Identifier Thread Type

GUA - Junction Box M - Metric
Exd I - Imperial
N - NPT
B - BSP
Entry Configuration
B - 1 Back & 1 Side
C - 2 Side @ 180
o
L - 2 Side @ 90
o Entry Size
T - 3 Side @ 90 Code Metric NPT
o
X - 4 Side @ 90 1- M20 1/2"

o
2- M25 3/4"
3- M32 1"
4- M40 1 1/4"
5- M50 1 1/2"
Body Size Opening
6 - 76mm
9 - 125mm
Dimensional Data
Dimensions
Cat No.
A B C D E F G H
GUBA01 90 59 40 19 17.5 114.5 80 138.5
GUAB02 150 108 102 33 32 175 140 215

Junction Boxes - GUA
Ordering Details
GUALA - 2 Entries
Entry Size Opening Dia Body Size Catalogue No.
20mm 76mm 6 GUALA16M
1/2" NPT 76mm 6 GUALA16N
3/4" NPT 76mm 6 GUALA26N
GUACA - 2 Entries
20mm 76mm 6 GUACA16M
3-3
1/2" NPT 76mm 6 GUACA16N
3/4" NPT 76mm 6 GUACA26N
GUATA - 3 Entries
20mm 76mm 6 GUATA16M
1/2" NPT 76mm 6 GUATA16N
3/4" NPT 76mm 6 GUATA26N
GUAXA - 4 Entries
20mm 76mm 6 GUAXA16M
1/2" NPT 76mm 6 GUAXA16N
3/4" NPT 76mm 6 GUAXA26N

Junction Boxes - C30 & C31
Technical Data
Type of Protection Ex d, Ex tD A21 IP67 T850C
Degree of Protection IP66 / 67
Gas Group IIC
Approvals IECEx BKI 07.0026
Ideal for use as termination boxes

Application
or housing of small printed circuit boards C31
Standard Materials Copper Free Aluminium
C30 Ordering Details
3-4
C30 T1 Ext Dim: 108 x 108 x 90 (D) mm

NOR000001151581
c/w 1 x terminal & 3 x M20 entries
C30
C30 T2 Ext Dim: 108 x 108 x 90 (D) mm
NOR000001151599
C30 X1 Ext Dim: 108 x 108 x 90 (D) mm
NOR000001151506
C30 X2 Ext Dim: 108 x 108 x 90 (D) mm
NOR000001151514
C31 Ordering Details
C31 T1 Ext Dim: 150 x 150 x 104 (D) mm

NOR000111150501
C31 T2 Ext Dim: 150 x 150 x 104 (D) mm
NOR000111150502
C31 X1 Ext Dim: 150 x 150 x 104 (D) mm
NOR000111150504
C31 X2 Ext Dim: 150 x 150 x 104 (D) mm
NOR000111150505

Junction Boxes - PBEC
Technical Data
Type of Protection Exe, Ex tD A21, T800C
Gas Group IIC
Approvals IECEx BAS09.0084X
Ideal for lighting and instrumentation

Application
applications
Standard Materials Fibre glass reinforced polyester

Weatherproof enclosures
Options
Alternate entries & terminal configurations
Ordering Details
3-5
Type & Description
Product Code of Terminal
PBEC-10CLR1M2B1M 10x6mm2 terminals 1xM20 Left & Right 2xM20 bottom
PBEC-10CLR2M2B2M 10x6mm2 terminals 1xM25 Left & Right 2xM25 bottom

Note: Other configurations available on request
Max.Entries/Cable glands Top/Bottom M16 M20 M25 M32

6 2 2 1
Max.Entries/Cable glands Left/Right M16 M20 M25 M32
4 1 1 0
Max.number of pillar terminal* 8x10mm2 (8 pcs/4 pairs)
Max.number of rail terminal* 2.5mm2 4mm2 6mm2 10mm2
A B C D
12 11 10 8
*The information provided based on the physical constraints of the
enclosure.Please contact Cooper Crouse-Hinds engineers to get accurate termi-
nal numbers according to certificate for hazardous area applications.

Junction Boxes - GUBA
Technical Data
Zone 1 Zone 2
Gas Group IIC
Approvals ANZEx05.3043X
To function as a splice box, pull box or

Application
equipment device enclosure
Standard Materials Body & cover - cast copper free aluminium

Cast iron bodies & covers
Grey polyurethane finish
Options Metric, Imperial, NPT or BSP threads
Glass window
Dome covers
3-6
Ordering Details
Type & Description Product Code
Empty enclosure 195mm x 2175mm x 107 (mm) GUBA01
Flat cover for GUBA01 GUBA0101
Glass window for GUBA01 (gas group IIB only) GUBA0110
Empty enclosure 253mm x 283mm x 135 (mm) GUBA02
Note: Entries must be factory drilled, price adder applicable.
Dimensional Data
Internal Dimensions Weight

Cat No.
A B C D E F G H
GUBA01 195 220 175 146 146 130 107 76
GUAB02 253 298 233 204 224 185 135 76
Mounting Dimensions No. of Weight

Cat No.
X Y Mounting Feet kg
GUBA01 195 145 2 4.2
GUAB02 264 216 2 8.1

Junction Boxes - EJBA
Technical Data
Zone 1 Zone 2
Gas Group IIB or IIB +H2
Approvals ANZEx 06.3018X

Terminal box or Bus bar system
Junction box with terminals
To enclose equipment and control de-
Application vices, relays, contactors and/or instru-
ments
To house custom built panels
(refer to section 4 custom built enclosures)
3-7
Options Captive cover screws
Marine grade paint
Dimensional Data
Mtg
Cat.No. A B C D E F
Screws
EJBA464 215 165 122 135 145 150 M6
EJBA783 280 240 87 115 230 192 M8
EJBA786 280 240 87 170 230 192 M8
EJBA886 280 280 180 230 140 280 M8
EJBA1286 280 380 175 225 168 305 M12
EJBA9166 305 485 175 225 242 325 M12
EJBA121208 415 415 230 285 143 395 M6
EJBA161608 516 516 230 285 242 505 M8
EJBA211710 654 545 323 355 300 610 M8
EJBA241810 595 750 295 350 413 556 M8
EJBA242410 750 750 295 350 413 708 M12
Note: All drilling and tapping of entries must be carried out by the manufacturer to ensure that certification requirements are not breached. Whilst
mounting of devices such as relays etc. can be carried out in the future if the enclosure is provided with a mounting plate, care should be taken
with devices which are likely to raise the surface temperature of the enclosure.

Junction Boxes - EJB
Technical Data
Zone 1 Zone 2
Gas Group IIB
Terminal box or Bus bar system

Junction box with terminals
Application To enclose equipment and control de-
vices, relays, contactors and/or instru-
ments
Custom built panel boards
3-8
Options
Captive cover screws
Ordering Details
EJB Size Ranges & Gas Group
Dispertion Dispertion Dispertion

Width Height Depth Window
Catalogue No. Power Power Power
(mm) (mm) (mm) (mm)
T6 T5 T4
EJB12A 216 130 162 30 60 100
EJB14R 420 150 143 80 140 240
EJB23R 337 217 211 60 140 240
EJB110 371 371 233 125 170 295
EJB120 474 371 233 150 270 480
EJB120M3 474 371 233 150 270 480 75 x 150
EJB120M4 474 371 233 150 270 480 180 x 140
EJB131 577 371 305 200 350 600
EJB241 680 474 305 250 400 700
EJB241M1 680 474 305 250 400 700 230 x 255
EJB241M2 680 474 305 250 400 700 460 x 255
Note: All drilling and tapping of entries must be carried out by the manufacturer to ensure that certification
requirements are not breached. Whilst mounting of devices such as relays etc. can be carried out in the future if
the enclosure is provided with a mounting plate, care should be taken with devices which are likely to raise the
surface temperature of the enclosure.

Junction Boxes - JB*C
Technical Data
JBEC - Exe
Type of Protection JBDC - Combustible Dust
JBWC - Weatherproof
Gas Group IIC
Approvals ANZ Ex05.3014X
JBEC junction boxes are used as small

distribution boxes for lighting and
instrumentation
JBDC junction boxes are used in com-
bustible dust locations such as grain han-
dling plants
Application
JBWC junction boxes are used:
3-9
- to house components such as terminals,
relays, switches etc.
- to terminate or join small cables
- to marshall small cables for connection
to large multi core or instrumentation cables
Standard Materials Copper Free Aluminium

Options Metric or NPT thread sizes
Ordering Details
JBEC 111 10 A 3 B 1 M
Catalogue number make-up:
Type & Description
Product Code
of Terminal
Box Size
No. of
Product Entry
Entries
Thread Size 140 x 140 x 107 (mm) c/w
Identifier
JBEC - Exe Face M - Metric JBEC111-14A-1A1M 10x2.5mm2 terminals & 1 x M20
JBDC - DIP Code Size N - NPT entries each side
JBWC - Weatherproof
No. of Terminals T Top
B Bottom 140 x 140 x 107 (mm) c/w
L Left
111
R Right JBEC111-14A-5B1M 14x2.5mm2 terminals & 5 x M20
A Equally entries
over all sides
Terminal Size Entry Size
140 x 140 x 107 (mm)
Code Size Code Metric NPT
No. or BSP
JBEC111-7E-2B3M c/w 7x16mm2 terminals & 2 x M32
A 2.5mm
entries
2
B 4.0mm 1 20mm 1/2"

2
C 6.0mm 2 25mm 3/4"

2
D 10.0mm 3 32mm 1"

2
E 16.0mm 4 40mm 1 1/4"

2
5 50mm 1 1/2"

Junction Boxes - JB*
Technical Data
JBE - Exe
JBD - Combustible Dust
Type of Protection
JBI - Intrinsically Safe
JBW - Weatherproof
Gas Group IIC

JBD - AUSEx 677
Approvals
JBE - ANZ Ex08.3060X
JB* junction boxes are used for cable
Application termination
- Marshalling boxes for instrumentation
Mild steel - zincalume plated, grey powder

Standard Materials polyester finish
3-10
Stainless steel - electropolished
Various size ranges

Choice of material
External stainless steel identification label
mounting bracket
Options
Glass window in cover (JBD & JBW only)
Breather drain fitted to bottom of
gland plate
Available as a custom built unit
Dimensional Details
Catalogue
A B C D E F H I
No.
JB22 270 200 155 128 230 240 150 80
JB33 270 300 205 178 330 240 250 130
JB54 500 400 205 178 460 440 350 130
JB75 700 500 205 178 660 540 450 130
JB96 900 600 305 278 860 640 550 230

Junction Boxes - JB*
Ordering Details
1. Determine quantity and size of terminals required.

2. For Exe applications compare requirements to table below for maximum number of terminals in JBE box.
3. Select enclosure size to accommodate quantity of terminals required. Consult factory if necessary.
4. Specify catalogue number as outlined below.
5. For other requirements refer to Ordering Specification Sheet.
JBE 33 SS - 3GP - 20 A - 8 B 1 M
Construction Entry Thread Form
JBE - Exe M - Metric
JBD - DIP N - NPT
JBI - Exi
JBW - Weatherproof Entry Size
Enclosure Material Quantity of Quantity of Code Metric NPT
Enclosure Size MS - Mild Steel Terminals Entries 1- M20 1/2"
22 - 270x200x150 SS - Stainless Steel
2- M25 3/4"
33 - 370x300x200
3- M32 1"
54 - 500x400x200 Terminal Size 4- M40 1 1/4"
75 - 700x500x200
3-11
96 - 900x600x300 Code Size mm2 5- M50 1 1/2"
Gland Plates
1GP - Bottom only A- 2.5
3GP - Sides & Bottom B- 4 Gland Plate
C- 6 B - Bottom
D- 10 L - Left
E- 16 R - Right
G- 35
H- 70
Example: The catalogue number detailed above specifies a JBE Exe Increased Safety enclosure
370x300x200mm stainless steel, complete with bottom and side gland plates, 20 x 2.5 mm2
terminals and 8 x M20 entries on the bottom gland plate.
Note: To specify combinations of different terminal and entry sizes, include additional code groups within
the catalogue number separated by a dash (-), i.e. JBE33SS-3GP-10A-5B-8B1M-1B2M
Please consult factory for availability.
Maximum Number of Terminals in JBE Exe Box:

Instrumentation
Catalogue Standard Terminals - Power Application at Max Rated Current
Circuit Current (A)
No.
A B C D E g H
2.5mm2 4.0mm2 6.0mm2 10.0mm2 16.0mm2 35.0mm2 70.0mm2 2.5mm2
JBE22 26 20 19 17 17 10 9 34
JBE33 57 46 44 39 38 24 23 100
JBE54 72 58 57 49 48 31 30 135
JBE75 85 75 80 61 61 39 39 290
JBE96 112 91 89 75 75 49 50 380
Note 1: Limitations apply on terminal populations within Exe enclosures to ensure maximum power dissipation limits are not ex
ceeded. Terminal populations can therefore increase where terminal loads are less than the maximum rated.
Consult factory for details.
The maximum number of terminals outlined for instrumentation circuit currents are recommended as a practical limit to
ensure generous wiring space is available. Larger quantities of terminals can be provided.
Note 2: Large power terminal - Available on request, consult factory.
Note 3: Combinations of different terminal sizes - Available on request, consult factory

Junction Boxes - XLH
Technical Data
Ex e ia, T6 - Terminal Boxes

Ex dem ia/ib, T6, T5 or T4 -
Type of Protection Installation Control Unit & Distribution
Equipment
Ex tD A21 IP66 T800C
Gas Group IIC
XLH junction boxes are used for:

- Cable termination
Application
- Marshalling boxes for instrumentation
- Control stations
Mild steel
3-12
Standard Materials
Stainless steel - matt finish
Central locking
Various size ranges
Electropolished stainless steel
Options External stainless steel identification label
Mounting bracket
Breather drain fitted to bottom of
gland plate
Available as a custom built unit
Ordering Details & Dimensional Data
XLH Size Ranges & Gas Group
Catalogue No. Size (mm) 2.5mm2 4mm2 6mm2 10mm2 16mm2

Vertical Orientation in Enclosures
XLH231513 229 x 152 x 127 1 x 21 1 x 17 1 x 13 1 x 10 1x9

XLH262615 260 x 260 x 152 2 x 27 2 x 23 1 x 17 1 x 13 1 x 11
XLH303020 306 x 306 x 205 2 x 36 2 x 30 2 x 23 2 x 18 2 x 15
XLH404020 406 x 406 x 203 3 x 56 3 x 47 3 x 35 3 x 28 3 x 23
XLH504020 508 x 406 x 203 3 x 77 3 x 64 3 x 48 3 x 38 3 x 32
XLH506020 508 x 610 x 203 6 x 77 6 x 64 6 x 48 6 x 38 6 x 32
XLH605020 610 x 508 x 203 4 x 97 4 x 81 4 x 61 4 x 49 4 x 40
XLH766020 762 x 610 x 203 6 x 128 6 x 106 6 x 80 6 x 64 6 x 53
XLH767620 762 x 762 x 203 7 x 128 7 x 106 7 x 80 7 x 64 7 x 53
Other enclosure sizes available upon request

Junction Boxes - GHG
Technical Data
Exe, T6 - Terminal Boxes

ExtD A21 IP66 T80˚C - Combustible Dust
Type of Protection
Ex ia - Intrinsically Safe
Weatherproof
Gas Group IIC

IECEx BKI 05.0004
Approvals
IECEx BKI 05.0005
JB* junction boxes are used:
Application - for cable termination
- as marshalling boxes for instrumentation
Glass fibre re-inforced polyester
3-13
Standard Materials Aluminium enclosure available
upon request
Various size ranges

Choice of material
Options
External stainless steel identification label
mounting bracket
Ordering Details
Catalogue No. Size (mm) 2.5mm2 4mm2 6mm2 10mm2 16mm2 25mm2 35mm2
GHG73111 140 x 120 x 95 16 14 10 8 8 - -
GHG73112 140 x 182.5 x 95 24 24 18 18 14 - -
GHG72100 165 x 165 x 131.5 26 22 17 13 11 - -
GHG72110 165 x 285 x 143 48 40 30 24 20 - -

GHG74401 271 x 134 x 136 40 33 25 20 17 15 -
- -
GHG74603 544 x 271 x 136 2 x 94 2 x 76 2 x 59 2 x 47 40 40 32
GHG74904 817 x 271 x 136 2 x 148 2 x 124 2 x 94 2 x 75 63 63 51

Industrial Control
Being reliably in control gives you peace of mind.

Crouse-Hinds have over 100 years of experience in industrial
control.
From a simple, single station mushroom head emergency stop
in FRP or SS enclosure to a large custom built control panel, in
a range of dual certified IECEx and ATEX configurations, we
can provide you with the appropriate solution.

Industrial Control
Industrial Control
DSA - Exd START/STOP & Control Switches ................4-2
GHG44 - Exe d, ExtD Control Panel ..............................4-5
EMD - Exd ib Earth Monitoring Device............................4-7
GHG273 - Exe d, ExtD Lighting Swich............................4-8
GHG29 - Exde Remote Control Unit ..............................4-9
ESA - Exd Isolator ........................................................4-10
GHG26 - Exe d, Ex tD Isolator ......................................4-12
EMA - Exd DOL Starter ................................................4-13
EPBA - Exd Panel Board ..............................................4-14
4-1

Industrial Control - DSA
Technical Data
Zone 1 Zone 2
Gas Group IIB
Approvals ANZEx05.3007
Application Motor& process control stations
Bases & covers - copper free aluminium

Switch operating levers, shafts & bushes -
Standard Materials
stainless steel
Alternative finishes
Options Special engravings
Traffolyte labels (50mm x 10mm)
Ordering Details - Face
4-2 D S A 0 3 P
Catalogue number make-up:
Product
Identifier
D - Control Station Options
DB - Additional N/O &
N/C contact
P - Padlock
Type of Device
(please refer below)
0 Blank
1. Standard Push Button (Red, Black or Green)
2. Mushroom Head Self-Resetting Push Button (Red)
3. Mushroom Head Push Button Maintained OFF
4. Mushroom Head Push Button Maintained OFF, Key Reset
5. Key Switch Push Button
6. Selector Switch Push Button
7. Special - See listings
8. Pilot Light (A-Amber, R-Red, G-Green, B-Blue, C-Clear)
9. Rotary Stack Switch

Push Button Ordering Details
Catalogue No. Description
DSA01 Standard push button

DSA02 Mushroom head push button, spring return
DSA03 Mushroom head push button, latching
DSA03P Mushroom head push button, latching & padlockable
DSA04 Mushroom head push button, latching & key re-set
DSA05 Key switch push button
DSA08 Indicating light (add G, R, A, B, C for colours)
DSA11 1 x start push button & 1 x stop push button
DSA12 1 x start push button & 1 x mushroom head stop spring return
DSA13 1 x start push button & 1 x mushroom head stop latching
DSA13P 1 x start push button & 1 x mushroom head stop latching & padlockable
DSA14 1 x start push button & 1 x mushroom head stop key re-set
DSA15 1 x start push button & 1 x key switch push button
DSA18 1 x start push button & 1 x indicating light (add G, R, A, B, C for colours)
DSA88 2 x indicating lights (add G, R, A, B, C for colours)
Switch Ordering Details
Catalogue No. Description 4-3

DSA9-A178 10A, OFF - RUN - START, spring return from START - RUN
DSA9-A201 20A, 2 pole, 2 positions ON - OFF
DSA9-A212 20A, 3 pole, 3 positions change-over with centre OFF
DSA9-A215 20A, 2 pole, 3 positions change over with centre OFF
DSA9-A221 20A, 2 pole, 2 positions change over
DSA9-A222 20A, 4 pole, 2 positions change over
* Switch base DSAB ordered separately, see next page.

Ordering Details - Bases
DSAB 1 - 1 0 1 0
Product Identifier Left Side Right Side

DSA - Control Station Size Code Size Code
1 - 20mm 1 - 20mm
2 - 25mm 2 - 25mm
Single or Double Gang 3 - 32mm 3 - 32mm
1 - Single Gang
2 - Double Gang
Top Entry Size Code Bottom Entry

1 - 20mm Size Code
2 - 25mm 1 - 20mm
3 - 32mm 2 - 25mm
3 - 32mm
Dimensional Data
4-4

Industrial Control - GHG44
Technical Data
Type of Protection Exe d, ExtD A21 IP66T800C
Gas Group IIC
Application Motor & process control stations
Bases & covers - high impact strength,

corrosion resistant polyamide 12
Standard Materials
Gaskets - 2 component polyurethane foam
External hardware - stainless steel
Stainless Steel available upon request

Options
(add suffix SS to part no.)
Ordering Details
No. of No. of
4-5
Catalogue No. Size (mm)
Operators Terminals
DSEA1 100 x 156 x 90 2 -

DSEA2 100 x 245 x 90 4 -
DSEA1-SS 140 x 166 x 76 2 -
DSEA2-SS 140 x 286 x 76 4 -
GHG444 23 148 x 271 x 136 6 20
GHG448 23 285 x 271 x 163 18 30
GHG449 23 285 x 544 x 136 36 60
GHG447 23 285 x 817 x 136 54 90
GHG444 33-SS 175 x 312.5 x 135 6 20
GHG448 33-SS 312.5 x 312.5 x 135 18 30
GHG449 33-SS 312.5 x 627 x 135 36 60
GHG447 33-SS 312.5 x 941.5 x 135 54 90

Industrial Control - DSEA
Table 1
Device
Description
Type
1 Push Button c/w 1-N/O & 1-N/C
2 Mushroom Head Push Button c/w 1-N/O & 1-N/C Momentary Contact
3 Mushroom Head, Push Button c/w 1-N/O & 1-N/C Maintained Off, Pull To Reset
4 Mushroom Head Push Button c/w 1-N/O & 1-N/C Key To Reset
5 Selector Switch, 2 Poles ON/OFF Maintained
6 Selector Switch, 2 Positions, 1P Change Over
6SL Selector Switch, 3 Positions, 1P Change Over
6SR Selector Switch, 3 Positions, 1P Change Over, Spring Return From Right
6SLR Selector Switch, 3 Positions, 1P change Over, Spring Return To Centre
7 Ammeter, 72mm Square, CT Operated, 1A Movement (5A on request)
8 Pilot Light, 12-240V ac/dc, 50/60 Hz (optional for other voltages)
Ordering Details
Start push button DSEA1-1

Stop/start double push button DSEA1-11 88 MTG CTRS 100
Fire alarm break glass push button DSEA1-1BG

MRH stop push button, pull to release DSEA1-3
MRH stop push button, 2NC contacts DSEA1-3-2NC
4-6
Padlockable MRH pull to release stop push
DSEA1-3P
button
Padlockable MRH stop push button -
DSEA1-3P-2NC
188 MTG CTRS 250
2 NC contacts
2 position selector switch, 1 NO & 1NC DSEA1-5
3 position off, run, start switch DSEA1-6
72x72mm ammeter n=1A or 5A or 20mA DSEA1-7
Pilot light 240V DSEA1-8*
Flush start push button & MRH stop DSEA1-1-3
Padlockable flush start push button
DSEA1-1-3P
c/w MRH stop 100
Start push button & pilot light 240V DSEA1-1-8* 88 MTG CTRS
Pilot light 240V & pilot light 240V DSEA1-8*-8* 90
Double stop/start push button & remote local

DSEA1-11-5
selector switch
Start push button + MRH stop & pilot light DSEA2-1-3-8*
160
98 MTG CTRS
Double push button + 2 pilot lights DSEA2-8*-8*-11

4 double push buttons DSEA2-11-11-11-11
2 double push buttons & 2 pilot lights DSEA2-11-8*-11-8*
2 flush push buttons & 2 MRH push buttons DSEA2-1-3-1-3
1 x AM72 ammeter + 1 push button & 1 MRH
DSEA2-7-1-3
push button

Industrial Control - EMD
Technical Data
Zone 1 Zone 2
Type of Protection Exd ib
Gas Group IIC (H2)
Approvals ANZ Ex07.3049X

Used where earthing is required to:
- Provide earth connection to prevent
static build up
Application
- Monitor earth continuity
- Activate alarms & shut down process
when earth connection is interrupted
Body & cover - copper free aluminium

Gasket - neoprene
Standard Materials
Cover screws - stainless steel
Ordering Details
Description Part No. Weight
Single unit c/w earth clamp

Double unit c/w earth clamp
EJBA783-EMD1
EJBA786-EMD2
14kg
19kg
4-7
Single unit c/w earth clamp
EJBA786-EMD1-BP 20kg
& by-pass switch

Technical Data
Type of Protection Exe d, ExtD A21 IP66 T670C
Gas Group IIC

Toggle ON/OFF & lighting control switch
Application
Ease of operation whilst wearing gloves
Enclosure & cover - high impact strength

corrosion resistant polyamide 12
Standard Materials
Gaskets - 2 component polyurethane foam
Picture shows external metal flange - glands not inlcuded
Ordering Details
Description Part No. Weight
4-8 2 Pole On/Off

c/w 2 x M20 bottom entries
GHG 273 2000 R0010
2 Pole On/Off
c/w 1 x M20 top and bottom GHG 273 2000 R0011
entry
2 Way Change Over GHG 273 6000 R0011
2 Pole Spring Return GHG 273 4000 R0004

Technical Data
Type of Protection Exde, Extd, A21
Gas Group IIC
Approvals IEC Ex BKI07.0011
Plant control functions on industrial control

Application
systems
High impact resistant fibre glass reinforced

Standard Materials
polyester
Ordering Details
GHG29 3 7 067 14 14 - 1 B 2 M 2
4-9
Entry Size
Product Series
Code Metric NPT
Ammeter Scale 1- M20 1/2"
Ammeter 2- M25 3/4"
2 - Not Included
3 - Included 3- M32 1"
Selector Mechanism Thread Type

See table below M - Metric
N - NPT
B - BSP
Contact Configuration Quantity of Entries

See table below
Switch Position Label Cable Entry Method

See table below P - Removable Plastic Flange Plate
B - Removable Brass Flange Plate
D - Entries Direct Into Enclosure
Looping Terminals*
(4 + Earth)
0 - Not Included
1 - Included
* Note: Control switches with direct reading ammeters are supplied as standard with 2 looping terminals + Earth

Ordering Details
Mechanism
Function 45 45 45 45 90 45 45
Special Switch
45 45
0 0 0 0
Mechanism
0
0 0 0 0
Code 4 5 6 7 8 9
Ammeter Contact Configuration
Direct Reading CT Connection N / 1A Code Configuration

Code Scale Code Scale 014
99 No Ammeter 10 No Ammeter
01 0-1 / 1.5A 11 0-2.5 / 3.75A 024
02 0-2.5 / 3.75A 12 0-5 / 7.5A
03 0-5 / 7.5A 13 0-10 / 15A
037
04 0-10 / 15A 14 0-15 / 22.5A
05 0-16 / 24A 15 0-25 / 37.5A
06 0-25 / 37.5A 16 0-50 / 75A 062
07 0-20 / 24mA (0-100/120%) 17 0-100 / 150A

08 4-20 / 24mA (0-100/120%) 18 0-150 / 225A 063
19 0-200 / 300A
20 0-300 / 450A 065
21 0-400 / 600A
22 0-500 / 750A
067
23 0-600 / 900A
24 0-100 / 150% Others configurations available on request
4-10
Switch Position Dimensional Data
Code Details
01 0 I
02 I II
04 OFF ON
05 STOP START
06 HAND AUTO
08 REMOTE LOCAL
09 I 0 II
13 OFF AUTO ON
14 HAND 0 AUTO
15 0 I II
16 LOCAL REMOTE AUTO
17 0 IN START
18 STOP 0 START
99 Text as Ordered

Industrial Control - ESA
Technical Data
Zone 1 Zone 2
Gas Group IIB
ESA isolating switches are used:
Application - As motor isolators
- For MCB to 63A
Enclosure - Cast aluminium

Operating handle, shaft & bush -
Standard Materials
Stainless steel
Cover screws - Stainless steel
Technical Data
ACI AC3 Max

Catalogue No. No. of Poles
Current Rating KW Rating
Isolating Switches
ESA 203-C26 32 Amps 4 11 KW
ESA 203-C32 40 Amps 4 15 KW
4-11
ESA 203-C42 63 Amps 4 18.5 KW
ESA K400 KG32 32 Amps 4 11KW
ESA K400 KG41 40 Amps 4 15KW
ESA K400 KG64 63 Amps 4 18.5KW
Change Over Switches ( With Centre Off)
ESA 212-C26 32 Amps 3 11KW
ESA 211-C32 40 Amps 2 15 KW
ESA 211-C42 63 Amps 2 18.5 KW
Change Over Switches (Without Centre Off)
ESA 222-C26 32 Amps 3 11KW
ESA 221-C32 40 Amps 2 15 KW
ESA 221-C42 63 Amps 2 18.5 KW
Reversing Switches
ESA 401E-C26 32 Amps 3 Phase 11 KW
ESA 622E- C26 32 Amps 1 Phase 11 KW

Technical Data
Type of Protection Exe d, Ex tD, A21 IP66 T550C
Gas Group IIC
Approvals IEC BKI 07.0012
GHG26 safety switches are used to iso-

late electrical equipment and installations
Application
for the purpose of conducting mainte-
nance inspection & repair work
Standard Materials High impact, glass reinforced polyester
Ordering Details
Rated Current Poles Contact Arrangement Catalogue Number Dimensions Cable Entries
10A 3 GHG 261 0005 R9026 84 x 102 x 112 2 x M20

20A 3 GHG 262 2301 R9179 110 x 170 x 129 2 x M20
40A 3 GHG 263 2301 R9051 140 x 225 x 156 1 x M20 + 2 x M25
80A 3 GHG 264 0020 R9105 271 x 271 x 275 2 x M50
4-12
125A 3 GHG 265 0010 R9095 271 x 544 x 275 2 x M63
180A 3 GHG 266 0006 R9040 271 x 544 x 275 2 x M63
200A Available upon request
Dimensional Data
3 Pole 20A 6 Pole 20A & 3 Pole 40A

Industrial Control - EMA
Technical Data
Zone 1 Zone 2
Gas Group IIB
EMA Direct-on-line motor starters are

used for:
Application
- DOL starting of polyphase and single
phase AC induction motors
Enclosure - Copper free aluminium

Push button shafts & cover screws &
Standard Materials
bushes - Stainless steel
Push buttons & guards - Type 6/6 nylon
Technical Data
Rating Current Overload Range

Catalogue No.
(KW) (A)
EMA11SS.25KW 0.25 0.63 - 1.0
4-13
EMA11SS.55KW 0.55 1.0 - 1.7
EMA11SS1.5KW 1.1/1.5 2.5 - 4.0
EMA11SS2.2KW 2.2 4.0 - 6.8
EMA11SS5.5KW 4.1/5.5 9.0 - 13.0
EMA11SS7.5KW 7.5 12.0 - 18.0
EMA11SS11KW 11 16.0 - 23.0
EMA11SS15KW 15 23.0 - 32.0
EMAB11SS22KW 22 40.0 - 52.0
EMAB11SS37KW 37 58 - 72

Industrial Control - EPBA
Technical Data
Zone 1 Zone 2
Gas Group IIB or IIB (H2)

ANZEx 06.3018X
Approvals
ANZEx 06.3049X
Custom built panels are used:

Application - Distribution panels for motor control
& indications
Body & cover - copper free aluminum

Cover screws - stainless steel
Hinges (to size 1616) stainless steel
Standard Materials Hinges (size 2418 & above) copper free
aluminum
Gasket - neoprene
Branch circuit breakers - investment cast
stainless steel
Mounting Configurations
4-14
Wall Mounted Circuit Breaker Distribution Panel

Free Standing
Motor Control
Panel

Industrial Control - EPBA
Ordering Details
EPBA 2424A - 4 2P 20 - 22P16 - 42P10 - 4M125 - C

EPBA
Panel Board
Prefix
Additional Breakers
Circuit Breaker
2 pole 16A 22P16
Panel Board Size Trip Rating (A)
2 pole 10A 22P10
2424 20 Main
Circuit Breaker
4M125
No. of Branch
Circuit Breakers
4
No. of Poles Option

Circuit Breakers IIC
2P
Please consult factory for availability Note: Main circuit breaker is provided only when specified in catalogue number
Supplied with circuit Lock out facility provided on all circuit

Supply wiring connected direct to main circuit breaker
breakers factory breaker operator handles

wired to terminals
mounted in the base
4-15
Cat.No. A B C D E F
EPBA1212 415 415 230 285 143 405
EPBA1616 516 516 230 285 242 505

Pre-drilled & EPBA2418 750 595 295 350 413 556
tapped
entries EPBA2424 750 750 295 350 413 708
Screw fastened blank traffolyte label

Earth bar mounted in base for connection provided for each branch circuit
of earth wiring on outgoing circuits breaker
Dimensional Data

Hazardous Area Lighting
Crouse-Hinds and CEAG are leading the way in lighting up

hazardous and ardous areas with many bright ideas.
The popular & reliable HID Champs® have been a well
proven fixture in many industries for a number of years whilst
the technologically advanced, unique and robust eLLK stan-
dard fluorescent fixtures provide total lighting solutions under
any condition.

Hazardous Area Lighting
Lighting
AEV - Exd ........................................................................5-2
EOLA - Exd ....................................................................5-3
T100A - Exd ....................................................................5-4
AEVBH - Exd, DIP T** ....................................................5-5
EVM - Exd ......................................................................5-6
EVME - Exde ..................................................................5-9
PX04 - Exde IIB T*, ExtD A21 IP67 T*C ......................5-12
FZD - Exde IIC T* ExtD A21 IP66 T0*C ........................5-13
KFL - Exde, ExtD A21 T1400C ......................................5-15
F*FB - Exd ....................................................................5-16
eLLK - Ex edm, Ex DIP ................................................5-17
eLLM - Ex de, Ex DIP ..................................................5-19
eLL* - Ex de mb [ib], Ex DIP ........................................5-20
cLLK Ex deq, ExtD ......................................................5-22
AB12 - Exd, ExtD ..........................................................5-23
LED Exit - Ex edm ib, Ex ..............................................5-24
nLLK - Ex nA, Ex tD ....................................................5-25
LED NVMV Exn A..........................................................5-26
NVMV - Exn R, DIP ......................................................5-28
NFMV - ExnR, DIP ........................................................5-33
NSSFMV ExnR, ExtD....................................................5-36
5-1

Hazardous Area Lighting - AEV*
Technical Data
Zone 1 Zone 2
Gas Group IIC
Ideal for general area, room or outdoor

Application
spot lighting
Body and guard - copper free aluminium

Standard Materials Glass - configurated glass, heat & impact
resistant
Ordering Details
Pendant Ceiling Wall

Max Lamp Size Type Hub Size Bulk Head T Rating
Mt Mt Bracket
300W 20mm AEVA311 AEVCX311 AEVBX311 AEVJ311

With Guard T3
Incandescent 25mm AEVA321 AEVCX321 AEVBX321 AEVJ321
SL25Fluorescent Minus Guard 20mm AEVA310 AEVCX310 AEVBX310 AEVJ310 T6
160W SB MV Minus Guard 25mm AEVA320 AEVCX320 AEVBX320 AEVJ320 T3
Dimensional Data
Mounting
Max Lamp Size A B C D
5-2
Configuration
SL 18W Wall Mount 216 390 368 318

Fluorescent Stanchion Mount 216 359 337 244
SL25 Fluorescent Wall Mount 216 441 413 333

Hazardous Area Lighting - EOLA
Technical Data
Zone 1 Zone 2
Gas Group IIC
Approvals ANZEx08.3007X
Used as an obstruction marker
- To mark towers & process columns
Application - To aid aircraft navigation
- To indicate presence of drilling rigs or
other industrial facilities
resistant
Ordering Details
Entry Lamp
Type Part No. Lamp
Size Holder
Single Unit
AEVA-EOLA1* 1 x M20 150W Max E27
Pipe Mount
Double Unit
AEVA-EOLA2* 1 x M20 150W Max E27
Pipe Mount
Single Unit
AEVCX-EOLA1* 4 x M20 150W Max E27
Base Mount
Dimensional Data
5-3

Hazardous Area Lighting - T*
Technical Data
Zone 1 Zone 2
Gas Group IIB
Ideal for use in:
- Confined spaces such as inspection pits
Application - Areas with restricted mounting height
- Pre-cast recesses
Body & guard - copper free aluminium c/w

grey polyurethane finish
External lens - configurated glass, heat
Standard Materials
treated & impact resistant
Internal lens - coloured glass with fresnel
configuration
Ordering Details
Type Catalogue No. T-Rating
18w SL Fluorescent T18SL T6
9W PL Fluorescent T09PL T6
Dimensional Data
5-4

Hazardous Area Lighting - AEVBH
Technical Data
Type of Protection Exd, DIP T**
Gas Group IIC
Ideal for use:
- In areas with low headroom or mounting
height where it allows the use of energy
efficient HID light sources
Application
- For wall mount in inspection pits and
similar wall mounting application where
the adjustable reflector allows the light to
be directed

resistant
Ordering Details
Lamp Entry
Catalogue No. Lamp Type **T rating
Size Size
AEVBH 42051 50W HPS 25mm T4
AEVBH 52021 2 x 11W PL Fluorescent 25mm T6
5-5
AEVBH 82051 50W Mercury Vapour 25mm T3
AEVBH 92171 175W Metal Halide 25mm T3
Accessories
AEVBHJ Pipe Mount racket

Hazardous Area Lighting - EVM
Technical Data
Zone 1 Zone 2
Gas Group IIB (IIC available upon request)
Approvals ANZEx 07.3012
EVM fixtures are ideal for use as pendant

Application
lighting both internally & externally
Mounting modules, cover, ballast housing,
guard and globe ring -
Copper free aluminium
Standard Materials Reflectors (dome and angle) - Fibreglass
reinforced polyester
Reflectors (highbay) - Alzak aluminum
Choice of reflectors
Choice of guards
Choice of light sources
In-Line Fuse
Options
Instant re-strike ballast enables a hot HPS
lamp to immediately re-strike after
momentary loss of arc due to voltage
fluctuation or power loss
(70-150W HPS only)
5-6

Technical Data
Pendant Mt Wall Mt Ceiling Mt Stanchion Mt

Watts Entry Size c/w Guard c/w Guard c/w Guard c/w Guard
Cat. No. Cat. No. Cat. No. Cat. No.
High Pressure Sodium - High Power Factor
70 20mm EVMA41M07B60000 EVMB41M07B60000 EVMC41M07B60000
25mm EVMA42M07B60000 EVMB42M07B60000 EVMC42M07B60000
1 1/4" BSP EVMJ44B07B60000
1 1/4" BSP EVMJ44B10B60000
1 1/4" BSP EVMJ44B15B60000
1 1/4" BSP EVMJ44B25B60000
1 1/4" BSP EVMJ44B40B60000
Metal Halide - High Power Factor Ballast
1 1/4" BSP EVMJ94B17B60000
1 1/4" BSP EVMJ94B25B60000
1 1/4" BSP EVMJ94B40B600
E V M * H 1 M 4 0 B 6 0 0 0 0
Product Identifier
EVMA - Pendant Mount
EVMB - Wall Mount
Gas Group
5-7
EVMC - Ceiling Mount
EVMJ - Stanchion Mount B - Group IIB
C - Group IIC
Instant Re- Options

Lamp Type strike 0 - Standard
S - HPS 0 - None 1 - Offshore Paint
Voltage
H - MV I - IR
& Frequency
M - MH *2 - 120V/60Hz
*3 - 220V/50Hz
Wattage
*4 - 220V/60Hz
07 - 70W
5 - 230V/50Hz
Entry Size 08 - 80W
6 - 240V/50Hz Special Options
1 - 20mm / 1/2" 10 - 100W
O- Standard
2 - 25mm / 3/4" 12 - 125W
S- Fuse
3 - 32mm / 1" 15 - 150W
4 - 1 1/4 " Entry Thread 17 - 175W
Special Options
M - Metric 25 - 250W
0- Standard
N - 25mm / 3/4" 40 - 400W
1- Special
B - BPS
*Consult factory for availability

Dimensional Data
Staunchion
80,100, 125, 175MV Mount
250W & 400W
Type 70,100, 150W HSP
MV, HPS & MV
175W MH
A B C D E
EVMA 553 610 499 564 618
EVMBX 635 693 581 646 697
EVMCX 553 610 499 564 618
EVMJ 543 594 573
Wall Mount Pendant Mount Ceiling Mount
Accessories
Dome Reflector Glass Assembly High Bay Reflector

Cat.No. RD739 Watts Cat. No. Cat.No. EV3912
5-8
Up to 175 EV7302
250/400 EV7404
30° Angle Reflector Guard Lamp Holder

Cat.No. RA739 Watts Cat. No. Watts Cat. No.
Up to 175 EV503 Up to 125 EVMVS62600-SA
250/400 EV5140 150 to 400 EVMVS12850-SA

Hazardous Area Lighting - EVME
Technical Data
Zone 1 Zone 2
Type of Protection Exde
Gas Group IIB (IIC available upon request)
EVMe fixtures are ideal for illuminating

Application
large heavy industry facilities
guard and globe ring - Copper free alu-
minium
Choice of reflectors
Choice of guards
In-Line fuse
Instant re-strike ballast enables a hot HPS
Options lamp to immediately re-strike after
momentary loss of arc due to voltage
fluctuation or power loss
(70-150W HPS only)
Wall & stanchion mount accessories to be
ordered seperatley
Ordering Details
E V M E H H 1 M 4 0 B 6 0 0 0 0
Product Identifier
EVMA - Pendant Mount Gas Group
5-9
EVMB - Wall Mount B - Group IIB
EVMC - Ceiling Mount C - Group IIC Instant Re-
EVMJ - Stanchion Mount strike
Wattage 0 - None
07 - 70W I - IR
08 - 80W Options
10 - 100W 0 - Standard
Lamp Type 12 - 125W 1 - Offshore Paint
S - HPS 15 - 150W Voltage
H - MV 17 - 175W & Frequency
M - MH 25 - 250W 2 - 120V/60Hz
40 - 400W 3 - 220V/50Hz
4 - 220V/60Hz
5 - 230V/50Hz
Entry Size 6 - 240V/50Hz Special Options
1 - 20mm / 1/2" O- Standard
Entry Thread S- Fuse
2 - 25mm / 3/4"
M - Metric
3 - 32mm / 1"
N - 25mm / 3/4"
4 - 1 1/4 " Special Options
B - BPS
0- Standard
1- Special

Dimensional Data
High Pressure Sodium (HPS)
Wattage T Rating Cat No.

70W T6 EVMES1M07B60000
100W T4 EVMES1M10B60000
150W T4 EVMES1M15B60000
250W T3 EVMES1M25B60000
400W T3 EVMES1M40B60000
High Metal Halide (MH)
Wattage T Rating Cat No.
70W T6 EVMEM1M07B60000
100W T4 EVMEM1M10B60000
150W T4 EVMEM1M15B60000
175W T4 EVMEM1M17B60000
250W T3 EVMEM1M25B60000
400W T3 EVMEM1M40B60000
Mounting Brackets (order seperately)
Pendant Mount Cat No.
M20 EVMEPM1
M25 EVMEPM2
1/2" NPT Clearance Hole EVMEPN1
3/4" NPT Clearance Hole EVMEPN2
Wall Mount Cat No.
M20 Thread EVMEWM1
M25 Thread EVMEWM2
Stanchion Mount Cat No.
2" Slipfitter Pipe EVMEJ
1 1/4" BSP Thread EVMEJB4
1 1/2" NPT Thread EVMEJN5
Dimensional Data
5-10
Wall Mount Pendant Mount Ceiling Mount Stanchion Mount

Accessories
Dome Reflector Glass Assembly Wall Bracket

Cat.No. RD739 Watts Cat. No. Cat No. EVMEW
Up to 175 EV7302
250/400 EV7404
30° Angle Reflector Guard Stanchion Bracket

Cat.No. RA739 Watts Cat. No. Cat No. EVMEJ
Up to 175 EV503
250/400 EV5140
5-11
High Bay Reflector Lamp Holder Pendant Bracket

Cat.No. EV3912 Watts Cat. No. Cat No. EVMEP
Up to 175 EVMVS62600-SA
150 - 400 EVMVS12850-SA

Hazardous Area Lighting - PX04 Flood Light
Technical Data
Type of Protection Exde IIB T*, ExtD A21 IP67 T*C
Gas Group IIB
Application General illumination for Zone 1 areas
Body - high grade aluminium

Enclosure material - light grey alloy
Standard Materials
Cover - boroscillicte glass
Reflector - polished aluminium
Options - Available with narrow beam
Ordering Details
Catalogue No. T Rating Wattage Lamp Amperage

NOR 000 115 170327 T3 250W HPS / MH 1.35A
NOR 000 115 170 321 T3 400W HPS 2.02A
NOR 000 115 170 315 T3 600W HPS 3.13A
NOR 000 115 170 322 T3 400W MH 1.98A
5-12
Accessories
Catalogue No. Dia

NOR 000 115 170 321 T3
NOR 000 115 170 315 T3

Hazardous Area Lighting - FZD Flood Light
Technical Data
Type of Protection Exde IIC T* ExtD A21 IP66 T0*C
Gas Group IIC

Flood light with remote control gear
Application Maximum weight of 14.9kg on top of the
pole
Body - High grade aluminium
Remote mount control gear enclosures -
Standard Materials Fibreglass re-inforced polyester
or stainless steel
Diffuser - tempered safety glass
Ordering Details
Control Gear Rated

FZD Reflector Catalogue No.
Enclosure Luminous Flux 2
250W MH / HPS Polyester 19000 / 25000 lm narrow beam NOR 000 005 192 505
250W MH / HPS Polyester 19000 / 25000 lm wide beam NOR 000 005 192 506
400W MH Polyester 35000 Im narrow beam NOR 000 005 194 105
400W MH Polyester 35000 Im wide beam NOR 000 005 194 106
400W HPS Polyester 48000 Im narrow beam NOR 000 005 194 005
400W HPS Polyester 48000 Im wide beam NOR 000 005 194 006
250W MH / HPS Stainless Steel 19000 / 25000 lm narrow beam NOR 000 005 192 501
250W MH / HPS Stainless Steel 19000 / 25000 lm wide beam NOR 000 005 192 502
250W MH Stainless Steel 35000 Im narrow beam NOR 000 005 194 101
400W MH Stainless Steel 35000 Im wide beam NOR 000 005 194 102
400W HPS
400W HPS
Stainless Steel
Stainless Steel
48000 Im
48000 Im
narrow beam
wide beam
NOR 000 005 194 001
NOR 000 005 194 002

5-13
Additional Lamp Data
Temperature Class Max. Surface Temp

Lamp
II 2G II 2D
T abmient -450C to +400C T abmient -450C to +500C T abmient -450C to +400C T abmient -450C to +500C
HST / HIT 250W T45) / T3 T3 T1305) / T150 C T150 C

0 0
HST / HIT 400W T3 - T180 C -

0

Hazardous Area Lighting - FZD Flood Light
Dimensional Data
5-14

Hazardous Area Lighting - KFL Vessel Light
Technical Data
Type of Protection Exde, ExtD A21 T1400C
Gas Group IIC
This powerful vessel light fitting is ideally

equipped for the use in the illumination of
the interior of boilers, containers & agitators.
Application Coupled with the PR holder the KFL can
be mounted on inspection windows.
The KFL is also suitable for general
illumination of small areas.
Body - High grade aluminium

Control Gear Enclosures -
Standard Materials Fibreglass re-inforced polyester
or stainless steel
Diffuser - tempered safety glass
12V version for mounting on trucks,

Options available upon request
Also available in halogen and LED
Ordering Details
Description No. of Entries Catalogue No.
240V, 50W halogen 2 x M25 NOR 000 005 140 010
110V, 50W halogen 2 x M25 NOR 000 005 140 120
240V, 7W LED 2 x M25 NOR 000 005 140 011
5-15
Accessories
Anti glare shield PAD NOR 000 005 140 700
Transport handle AT NOR 000 005 140 809

2 x mounting curve legs PI NOR 000 005 140 776
Halogen reflector lamp, 240V, 50 Hz 3 2369 100 001
LED lamp, Phillips Master LED 7W NOR 000 000 514 530

Hazardous Area Lighting - F*FB
Technical Data
Zone 1
Type of Protection Exd, T6
Gas Group IIC

Warning lighting in hazardous areas
Application
- Exd forklifts
Body - Copper free aluminium
Standard Materials Dome - Heat & impact resistant glass
Beacon - Solid state strobe light
Cast aluminum guard (EV505)
Special paint or protective finishes
Choice of lens colours*
Options (C=clear, G=green, A=amber, R=red
or B=blue)
Pendant entry
12 or 24V dc
Ordering Details
Exd / DIP flashing beacon 240Vac c/w clear lens FSFB301C*
Exd / DIP rotating beacon 240Vac c/w clear lens FRFB301C*
Dimensional Data
5-16

Hazardous Area Lighting - eLLK*
Technical Data
Type of Protection Ex edm, Ex DIP A21 IP66 TA800C
Gas Group IIC
IECEx BVS 09.0033

Approvals Germanischer Lloyd 12 207-98HH
BUREAU VERITAS 11694/BO BV
Ideal for use as general or task lighting in

Application areas where low mounting heights or
other space restrictions exist
Housing - glass mat reinforced polyester

Standard Materials
Diffuser - polycarbonate
- Bipin fluorescent lamp

- EOL compliance
- Central locking
Features - Hinged on either side
- Built in safety switches
- Zone 1 twin circuit electronic ballast
- Through wiring
Ordering Details
Rated Current
Lamps Power Factor T Rating Entries Catalogue No.
(A)
2 x 18W 0.18 0.95 T4 4 x M20 12267875111
1 x 36W 0.18 0.95 T4 4 x M20 12263875103
2 x 36W 0.34 0.95 T4 4 x M20 12266875111
1 x 58W 0.27 0.95 T4 4 x M20 12264875111
2 x 58W 0.53 0.95 T4 4 x M20 12267875111
5-17
Accessories
Ceiling Mount D2 Eye bolt A2 Pipe Mount

Cat No. 2 2480 092 000 Cat No. 2 2480 002 000
Type Pipe Diameter Height H Cat No:
R12 → 38-42mm 85mm 2 2480 462 000
R22 → 47-50mm 95mm 2 2480 472 000
R32 → 58-62mm 105mm 2 2480 482 000
Hex Screw S4
Cat No. 2 2480 054 000

Hazardous Area Lighting - eLLK
Dimensional Data
eLLK92018/18 eLLK92036 & eLLK92036/36
eLLK92058 & eLLK92058/58
Photometric Data
1 x 36 W Fixture 2 x 36 W Fixture
Rated luminous flux of lamps 1 x 36 W = 3,350 lm Rated luminous flux of lamps 2 x 36 W = 6,700 lm
Light efficiency in operation: Light efficiency in operation:
1 x 36 W = 86% 2 x 36 W = 78%
Illumination data acc. to LiTG B 30 Illumination data acc. to LiTG B 30
1 x 58 W Fixture 2 x 58 W Fixture
5-18
Rated luminous flux of lamps 1 x 58 W = 5,200 lm Rated luminous flux of lamps 2 x 58 W = 10,400 lm
Light efficiency in operation: Light efficiency in operation:
1 x 58 W = 81% 2 x 58 W = 72%
2 x 18 W Fixture
Rated luminous flux of lamps 2 x 18 W = 2,700 Im
Light efficiency in operation:
2 x 18 W = 78%
Illumination data acc. to LiTG B 30

Hazardous Area Lighting - eLLM
Technical Data
Type of Protection Ex de, Ex DIP A21 IP66 TA800C
Gas Group IIC
IECEx BVS 09.0033

Ideal for use as general or task lighting in


Standard Materials
- EOL compliance
- Hinged on either side
Features
- Built in safety switch
- Central locking
Ordering Details
Rated Current Metal

Lamps Power Factor T Rating Catalogue No.
(A) Entries
2 x 18W 0.18 0.95 T4 1 x M25 Plastic Gland 12268 875 101
2 x 36W 0.34 0.95 T4 1 x M25 Plastic Gland 1 2269 875 101
Dimensional Data
5-19
Photometric Data
2 x 18 W Fixture 2 x 36 W Fixture Wall Mount Bracket

Cat No. 2 2485 027
000
Rated luminous flux of lamps 2 x 18 W = 2,700 Im Rated luminous flux of lamps 2 x 36 W = 6,700 lm
Light efficiency in operation: 2 x 18 W = 6,700 Im Light efficiency in operation: 2 x 36 W = 78%

Hazardous Area Lighting - eLL* Emergency
Technical Data
Type of Protection Ex de mb [ib], Ex DIP A21 IP66 TA800c
Gas Group IIC
IECEx BVS 09.0033

Designed for use as emergency lighting in

Housing - glass mat re-inforced polyester

Standard Materials
- EOL compliance
- Built in safety switch
Features - Micro processeor monitored battery unit
- 90 mins or 3 hour emergency on 1 lamp
switchable at site
- Emergency inhibit switch function
- Through wiring
- Central locking
Ordering Details
Rated Current
Lamps Power Factor T Rating Catalogue No.
(A)
Ceiling Mount c/w 4 x M20 Entries
2 x 18W 0.23 0.95 T4 1 2260 879 111
2 x 36W 0.40 0.95 T4 1 2261 879 111
5-20
Pole Mount c/w 1 x M25 Plastic Gland
2 x 18W 0.23 0.95 T4 1 2273 879 101
Photometric Data
• Emergency Operation:
Apply the following luminous flux factors when determining perform-
ance under emergency single lamp operation:
18 W = approx. 1.5 h 90% / 3.0 h 45%
36 W = approx. 1.5 h 45% / 3.0 h 25%
Rated luminous flux of lamps:
1 x 18 W = 1,350 Im
1 x 36 W = 3,350 lm

Hazardous Area Lighting - eLL* Emergency
Features
Take the Guess Work out of Maintenance

• Status of the battery charge cycle is indicated by a series of Battery temperature is monitored Microelectronic controller monitors
five green Light Emitting Diodes (LED), each of which repre- during charge cycle charge cycle, eliminating over
sents 20% of battery capacity. The level of charge attained charge and Ni-cad memory effect
is indicated by the leading green LED which flashes. The
charge cycle is complete when all five green LED’s are on.
• Emergency operation commences on mains failure or when Charge status indicated

the main supply is switched off. During emergency operation by green LED display
the remaining battery capacity is indicated by the number of
LED’s which are on.
Flashing red LED indicates
• The red LED begins flashing after six months from the last when an operating duration
successful emergency duration test, or when during battery test is necessary at six
discharge a defective power supply or fluorescent lamp is month intervals as required
detected. The red LED will continue to flash until a success- by safety regulations
ful duration test is completed.
Red LED continues to
flash after duration test if
a malfunction is apparent
Battery can be disconnected

in Zone I area
Dimensional Data
eLLk92018/18 NIB Ceiling Mount - Emergency
eLLK92036/36 NIB Ceiling Mount - Emergency
5-21
eLLM92018/18 NIB Pole Mount - Emergency

Hazardous Area Lighting - cLLK
Technical Data
Zone1 Zone 2 Zone 21/22
Type of Protection Ex deq, ExtD A21 IP66 T80 °C
Gas Group IIC
Approvals IEC Ex CQM 10.0008

- EOL compliance
Application
- Built in safety switches
- Through wiring
- Central locking

Standard Materials
Ordering Details
Standard Luminaires
Rated Current
(A)
2 x 18W 0.16 0.95 T4 4 x M20 metal entries w/o gland CCL 0700014A
2 x 36W 0.34 0.95 T4 4 x M20 metal entries w/o gland CCL 0700018A
Emergency Luminaires
2 hours on 1 lamp
2 x 36W 0.36 0.95 T4 4 x M20 metal entries CCL 0800104A
Dimensional Data
cLLK 2x18W/2x36W
3.5 732(18W)
1332(36W)
400(18W) 188
700(36W) M8,14mm deep 46
M25x1.5
Hexagon SW13
65
5-22
130
1360 Unit: mm
Accessories
Ceiling Mount D2 Eye bolt A2

Cat No. 2 2480 092 000 Cat No. 2 2480 002 000 Pipe Mount

R12 ↓ 38-42mm 85mm 2 2480 462 000
R22 ↓ 47-50mm 95mm 2 2480 472 000
R32 ↓ 58-62mm 105mm 2 2480 482 000
Hex Screw S4
Cat No. 2 2480 054 000

Hazardous Area Lighting -AB12
Technical Data
Type of Protection Exd, ExtD A21 IP67 T760C
Gas Group IIB
Approvals IEC Ex BKI 07.0008X

Designed for use in hazardous areas
where low mounting heights or other
space restrictions exist
Application
Ideal for illumination in spray booth areas
or areas where a heavy concentration of
solvent is expected
Body - copper free aluminium
Diffuser - mechanical resistant borosilicate
Standard Materials
glass
Withdrawable gear tray plate
Ordering Details
Rated Current
Lamps Power Factor T Rating Type Entries Catalogue No.
(A)
Ceiling Mount with electronic ballast
2 x 18W 0.17 0.95 T5 AB12220E 2 x M20 NOR000005060300-M20
2 x 36W 0.48 0.95 T5 AB12240E 2 x M20 NOR000005060308-M20
Accessories
Descripton Type Catalogue No.
Stainless steel reflector for AB12220 RAB220 NOR003165060403

Stainless steel reflector for AB12240 RAB240 NOR003165060411
Stainless steel reflector and guard for AB12220 GRAB220 NOR003165060479
Stainless steel reflector and guard for AB12240 GRAB240 NOR003165060497
5-23
Stainless steel celling mount bracket D92 22480092000
EYE BOLT A2 22480002000
PIPE CLAMP 38-42mm R12 22480462000
PIPE CLAMP 41-50mm R22 22480472000
PIPE CLAMP 58-62mm R32 22480482000
Dimensional Data

Hazardous Area Lighting - LED
Technical Data
Type of Protection Ex edm ib, Ex DIP A21 TA600C
Gas Group IIC
Approvals IEC Ex BKI-06.0003
Ideal for use as both a maintained

Application
emergency exit and emergency bulkhead
- Robust polycarbonate construction

- Up to 50,000 hours life expectancy
Standard Materials
- Maintenance free operation
- Micro processeor monitored battery unit
Ordering Details
Rated Power Emergency

Lamps T Rating Catalogue No.
Consumption Duration
LED Emergency Exit c/w Battery Back Up
Including cover with silk
Approx 8 VA 3 hours T5 1 2191 030 104-AUS-RR
screen decal, arrow right
Approx 8 VA 3 hours T5 1 2191 030 104-AUS-RL
screen decal, arrow left
Approx 8 VA 3 hours T5 1 2191 030 104-AUS-RC
screen decal, arrow down
Cover without pictogram Approx 8 VA 3 hours T5 1 2191 030 104
Dimensional Data
5-24

Hazardous Area Lighting - nLLK
Technical Data
Zone 2 Zone 21/22
Type of Protection Ex nA, Ex tD A21 IP66 T 80 °C
Gas Group IIC

IEC Ex BKI 06-0001
Approvals
AUS Ex 3723 (emergency)
- EOL compliance
Application - Hinged on either side
- Through wiring
- Central locking

Standard Materials
Ordering Details
Standard Luminaires
Rated Current
(A)
2 x 18W 0.16 0.95 T4 4 x M20 metal entries w/o gland 13465218421
Emergency Luminaires
2 hours on 1 lamp
2 x 18W 0.18 0.95 T4 4 x M20 metal entries nLLK1M2188DMN00
2 x 36W 0.36 0.95 T4 4 x M20 metal entries nLLK1M2368DMN00
5-25
Please refer to eLLK dimensions
Accessories
Ceiling Mount D2 Eye bolt A2
Cat No. 2 2480 092 000 Cat No. 2 2480 002 000 Pipe Mount

R12 ↓ 38-42mm 85mm 2 2480 462 000
R22 ↓ 47-50mm 95mm 2 2480 472 000
R32 ↓ 58-62mm 105mm 2 2480 482 000
Hex Screw S4
Cat No. 2 2480 054 000

Hazardous Area Lighting - LED NVMV
Technical Data
Zone 2 Zone 21/22
Type of Protection Exn A, T4(at 55˚C amb) T5(at 40˚C amb)

Gas Group IIC
Ambient temperature -30˚C to +55˚C
IECEx UL10.0008
Approvals
DEMKO 10 ATEX 0915702
NVMV LED fixtures are ideal for use where:
- Maintenance access is difficult and
extended periods between relamping is
Application
required
- Space is limited and high levels of lighting
are required
Enhance safety & productivity
- Instant illumination and restrike
- Better visibility with crisp white light
- T5 temperature rating – safely operate in
the most hazardous environments
- Cold temperature operation no warmup
required
- “No lights-out” feature – if a single LED
fails, circuit provides enough useable light
to remaining LEDs
Reduce operation & maintenance costs
- Easy installation - compact modular
fixture attaches onto existing Champ
mounting module
Features
- Energy efficient technology use up to ½
the power of standard HID luminaire
- Provides up to 60,000 hours rated life –
eliminates need for frequent lamp
replacement
- Contains no mercury or other hazardous
substances
5-26
Reliable performance in any environment
- Shock and vibration resistant solidstate
luminaires have no filaments or glass
components that could break.
- Operating ambient -40ºC to 55ºC
- Low temperature starting -30ºC
- Dark sky compliant
guard, globe & ring -

Hazardous Area Lighting - LED NVMV
Features
Safe, reliable heat transfer
Heatsink - A durable extrusion provides safe and effective

heat transfer from the LED assembly to the outside
environment, ensuring low LED junction temperature, reliability
and sustained lumen performance. The vertical fin design
facilitates airflow and dust shedding.
Ordering Details NVMV5L - Ideal for Low-light Applications

The VMV5L luminaire is ideal for locations requiring lower light
levels. This fixture provides light output equivalent to many
100W - 150W high pressure sodium (HPS) luminaires.
Type Order Codes Rated Voltage
NVMV7L - Wide Area Illumination
The VMV7L luminaire is designed for wide area illumination
5L SERIES NVMV5LDM1-UNV 120V - 277V and for mounting heights of greater than 3.65m. Using less
than 100 watts the VMV7L provides light output equivalent to
7L SERIES NVMV7LDM1-UNV 120V - 277V many 175W metal halide (MH) fixtures, while providing 60,000
hours of illumination; over 6 times the life of a typical MH lumi-
naire.
9L SERIES NVMV9LDM1-UNV 120V - 277V
NVMV9L - High Lumen Output
The high output VMV9L provides increased lumen perform-
ance at the same power level of the 7L model. The VMV9L
uses advanced LED technology to achieve a higher
lumen/watt rating and can be used for mounting heights up to
6m.
Mounting Mounting Hub

Catalog Number
Module Style Size
NVMV5LDM1/UNV None Luminaire Less Mounting Module N/A
NVMV5L2ADM1/UNV APM20 Pendant M20
NVMV5L2CDM1/UNV CM20 Ceiling Mount Thru Feed M20
NVMV5L2TWDM1/UNV TWM20 Wall Mount Thru Feed M20
NVMV5LJDM1/UNV JM5 Stanchion 25° 1 1/2" NPT
NVMV5LPDM1/UNV PM5 Stanchion Straight 1 1/2" NPT

5-27

Note: Use adaptor ANB54NP for conversion from 11/2” NPT to 11/4” BSP

Hazardous Area Lighting - NVMV
Technical Data
Zone 2 Zone 21/22
Type of Protection Exn R, DIP
Gas Group IIC
ANZEx 08.3061
Approvals
IECEx CQM 09.0010X
NVMV fixtures are ideal for use where:

- Maintenance access is difficult and ex-
tended periods between relamping is re-
Application
quired
- Space is limited and high levels of light-
ing are required
guard, globe & ring -
Choice of body sizes
Powder free polyester coating
Quartz auxillary lamp (large body)
- to provide light during the period required
Options
for HID lamps to re-strike following
resumption of power after a power failure
Choice of accessories
Tuff skin coated G34 & G251 glass
Line fuse
Temperature (T) Ratings
5-28
Power Rating
High Pressure Sodium Metal Halide
(W)
G34 G303 G251 G34 G303 G251
70 T5 T5 - -
80 - - - -
100 T4 T3 - -
125 - - - -
150 T4 T3 - -
175 (small body) - - T3 T3
175 (large body) T4
250 (small body) T3 T2 T3 T2
250 (large body) T3 T3
400 T3 T2
400 (using sealed

T3 T4
reflector/glass RD4A)

Ordering Details
NVMV S 1 M C 40 6 P I 0 0
Product Group
NVMV- Champ
Wattage
07 - 70W
08 - 80W
10 - 100W
Lamp Type
12 - 125W
S - HPS
15 - 150W
M - MH
17 - 175W
H - MV*
25 - 250W
40 - 400W
Entry Size
1 - 20mm / 1/2"
Mounting
2 - 25mm / 3/4"
C - Ceiling
3 - 32mm / 1" Entry Thread W - Wall
4 - 1 1/4" M - Metric J - Stanchion
5 - 1 1/2" N - NPT
B - BSP
Voltage
& Frequency
2 - 120V / 60Hz Guard
3 - 220V / 50Hz 0 - Without Guard
4 - 220V / 60Hz P - Guard
5 - 230V / 50Hz R - RD4A
6 - 240V / 50Hz Instant Restrike
0 - None / Small Body
I - IR
L - Large Body
5-29
Special Options
0 - Standard
S - Fuse Options
0 - Standard
1 - Offshore Paint
R - Red Body
* Mercury Vapour available upon request

Ordering Details
High Pressure Sodium (HPS) 240V, 50Hz
With Reflector Lens Assy

Entry Size Lamp Watts With Glass and Guard
Cat No.
Ceiling/Pendant Mount
20mm 70 NVMVS1MC076P000 -
25mm 70 NVMVS2MC076P000 -
20mm 100 NVMVS1MC106P000 -
25mm 100 NVMVS2MC106P000 -
20mm 150 NVMVS1MC156P000 -
25mm 150 NVMVS2MC156P000 -
20mm 250 NVMVS1MC256P000 NVMVS1MC256RL00
25mm 250 NHMVS2MC256P000 NVMVS2MC256RL00
20mm 400 NVMVS1MC406PL00 NVMVS1MC406RL00
25mm 400 NVMVS2MC406PL00 NVMVS2MC406RL00
Wall Mount
20mm 70 NVMVS1MW076P000 -
25mm 70 NVMVS2MW076P000 -
20mm 100 NVMVS1MW106P000 -
25mm 100 NVMVS2MW106P000 -
20mm 150 NVMVS1MW156P000 -
25mm 150 NVMVS2MW156P000 -
20mm 250 NVMVS1MW256P000 NVMVS1MW256RL00
25mm 250 NVMVS2MW256P000 NVMVS2MW256RL00
20mm 400 NVMVS1MW406PL00 NVMVS1MW406RL00
25mm 400 NVMVS2MW406PL00 NVMVS2MW406RL00
Stanchion Mount
1 1/4" BSP 70 NVMVS4BJ076P000 -

1 1/4" BSP 100 NVMVS4BJ106P000 -
5-30
1 1/4" BSP 150 NVMVS4BJ156P000 -
1 1/4" BSP 250 NVMVS4BJ256P000 NVMVS4BJ256RL00
1 1/4" BSP 400 NVMVS4BJ406PL00 NVMVS4BJ406RL00

Ordering Details
Metal Halide (MH) 240V, 50Hz
With Reflector Lens Assy

Entry Size Lamp Watts With Glass and Guard
Cat No.
Ceiling/Pendant Mount
20mm 175 NVMVM1MC176P000 -

25mm 175 NVMVM2MC176P000 -
20mm 250 NVMVM1MC256P000 NVMVM1MC256RL00
25mm 250 NVMVM2MC256P000 NVMVM2MC256RL00
20mm 400 NVMVM1MC406PL00 NVMVM1MC406RL00
25mm 400 NVMVM2MC406PL00 NVMVM2MC406RL00
Wall Mount
20mm 175 NVMVM1MW176P000 -

25mm 175 NVMVM2MW176P000 -
20mm 250 NVMVM1MW256P000 NVMVM1MW256RL00
25mm 250 NVMVM2MW256P000 NVMVM2MW256RL00
20mm 400 NVMVM1MW406PL00 NVMVM1MW406RL00
25mm 400 NVMVM2MW406PL00 NVMVM2MW406RL00
Stanchion Mount
1 1/4" BSP 175 NVMVM4BJ176P000 -

1 1/4" BSP 250 NVMVM4BJ256P000 NVMVM4BJ256RL00
1 1/4" BSP 400 NVMVM4BJ406PL00 NVMVM4BJ406RL00
Accessories
Glasses Reflectors Reflector / Lens Guards
G34 (no guard) RD70 (dome) RD4A P22

- suits 70-250W - suits 70-250W - suits 400W - suits G251 glass
G25 (c/w guard) RA70 (300 angle) P33
5-31
- suits 70-250W - suits 70-250W - suits G303 glass
G303 RD739 (dome)

- suits 400W - suits large body 400W
RA739 (300 angle)

- suits large body 400W

Dimensional Data (Large Body)
Dimensional Data (Small Body)
5-32

Hazardous Area Lighting - NFMV Flood Light
Technical Data
Zone 2 Zone21/22
Type of Protection ExnR, DIP
Gas Group IIC
NFMV floodlights are ideal for general

Application
illumination in tank farm & open areas
Housing & door frame - die cast aluminium

Lens - tempered heat and impact resistant
Standard Materials
glass
Exterior hardware - stainless steel
Entries 2 x M20 & 1 x 3/4”
Ordering Details
High Pressure Sodium

NFMVS1MY4060000 T3 400W
NFMVS1MY2560000 T4 250W
NFMVS1MY1560000 T5 150W
NFMVS1MY1060000 T5 100W
NFMVS1MY0760000 T6 70W
Metal Halide
NFMVM1MY4060000 T3 400W
5-33
NFMVM1MY2560000 T4 250W
NFMVM1MY1760000 T4 175W
Mounting Accessories - Slipfitter
SFA6 (2 1/2" Pipe) M20
SFA6 / 2M (2 1/2" Pipe) M25
SWB6 WALL BRACKET

*SFA6 slipfitter adaptor and gland to be ordered seperately

Ordering Details
NFMV S 1 M Y 40 6 0 0 0 0
Product Group
NFMV - Floodlight
Wattage
07 - 70W
08 - 80W
Lamp Type 10 - 100W
S - HPS 12 - 125W
H - MV 15 - 150W
M - MH 17 - 175W
25 - 250W
40 - 400W
Entry Size
1 - 20mm / 1/2" Mounting
2 - 25mm / 3/4" C - Ceiling
3 - 32mm / 1" Entry Thread W - Wall
4 - 1 1/4" M - Metric J - Stanchion
5 - 1 1/2" N - NPT
B - BSP
Voltage
& Frequency
*1 - 110V / 60Hz 0
*2 - 120V / 60Hz
*3 - 220V / 50Hz
*4 - 220V / 60Hz
5 - 230V / 50Hz Instant Restrike
6 - 240V / 50Hz 0 - None
5-34
7 - 227V / 60Hz I - IR
Special Options
0 - Standard
S - Fused Options
0 - Standard
1 - Offshore Paint
R - Red Body
*Please consult factory for availability

Photometric Data
Lamp: 400W metal halide (M / H) Lamp: 400W high pressure sodium (HPS)
Total bare lamp lumens: 34,000 Total bare lamp lumens: 50,000
For 250 watt clear metal halide, For 150 watt HPS, multiply lux by 0.32. For 250 watt high pres-
multiply lux values by 0.6 sure sodium, multiply lux values by 0.6
Ratio of Distance to
Mounting Height
Ratio of Distance to Mounting Feet Ratio of Distance to Mounting Feet
Isolux Values at Various Mounting Heights

(Lux values for both charts)
Fixtures located at 00, 00
Mounting
Aiming angle at 450
Height A B C D E
5m 86.0 43.0 21.52 8.61 4.30
Fixture aiming angle 300 past vertical through 600
6m 18.42 24.75 11.84 5.38 2.47
before vertical
7m 31.20 15.06 7.53 3.23 1.51
9m 21.52 10.76 5.38 2.15 1.08 EPA Data - Aiming Angle
11m 16.14 7.53 4.30 1.61 0.75 00 = 2.9 300 = 2.5 450 = 2.5
12m 11.84 6.46 3.23 1.18 0.65
5-35

Hazardous Area Lighting - NSSFMV Flood Light
Technical Data
Zone 2 Zone21/22
Type of Protection ExnR, ExtD A22, IP66 T*˚C
Gas Group IIC
Approvals IEC Ex PTB 09.0022

NSSFMV floodlights are ideal for general
Application illumination in tank farm & highly corrosive
areas
Housing & door frame - stainless steel
SS316
Standard Materials Lens - tempered heat and impact resistant
glass
Exterior hardware - stainless steel
Entries 2 x M20
536
Ordering Details
High Pressure Sodium

NSSFMVSY250/240v 50Hz T3 250W
495
592
NSSFMVSY150/240v 50Hz T4 150W

Metal Halide
NSSFMVMY250/240v 50Hz T3 250W
NSSFMVMY150/240v 50Hz T4 150W
Mounting Accessories - Slipfitter
SFA6 (2 1/2"Pipe) M20
175
5-36
SFA6 / 2M (2 1/2"Pipe) M25
SWB6 WALL BRACKET
*SFA6 slipfitter adaptor and gland to be ordered seperately
Cable Gland
Pivot Bolts

5-37

Plugs & Receptacles
Be it in a Gaseous or Dusty environment, we have the solution

for your connectivity.
From switching main current (AC3) to instrumentation we will

connect you with our GHG5, FSQA, FNO and our very own Ex-
Link series.
Crouse-Hinds, through years of research and development

have created sophisticated engineered products that are simple
to use for our customers.

Plugs & Receptacles
Plugs & Receptacles

FSQA - Exd, DIP, T6........................................................6-2
PP - Exd, DIP, T6 ............................................................6-2
FNO - Exd, DIP, T6..........................................................6-3
PP - Exd, DIP, T6 ............................................................6-4
GHG - Ex de, T6, Ex tD ..................................................6-6
GHG Ex-Link ..................................................................6-7
6-1

Plugs & Receptacles - FSQA
Technical Data
Zone 1 Zone 21 Zone 22
Type of Protection Exd, DIP, T6
Gas Group IIB

FSQA 10-32A interlocked receptacles are

used with PP plugs:
Application - To supply power to portable electrical
equipment such as power tools, convey-
ors, portable pumps, hand lamps and
similar equipment
- Receptacle body - Copper free aluminium

- Receptacle sleeve - stainless steel
Standard Materials
- Pins - brass
- Receptacle - Grey polyurethane finish
Size Ranges As per below table
Ordering Details
No. of
Locking
Current Pins Receptacle Plug
Voltage Arrange-
Rating (A) (incl. Catalogue No. Catalogue No.
ment
earth)
10 3 32 V.A.C. A FSQA 103A PP103A
10 3 240 V.A.C. B FSQA 103B PP103B
10 3 240 V.A.C. C FSQA 103C PP103C
10 4 440 V.A.C. B FSQA 104B PP104B
10 4 440 V.A.C. C FSQA 104C PP104C
16 3 32 V.A.C. A FSQA 163A PP163A
16 3 240 V.A.C. B FSQA 163B PP163B
16 3 240 V.A.C. C FSQA 163C PP163C
16 6 440 V.A.C. B FSQA 166B PP166B
16 6 440 V.A.C. C FSQA 166C PP166C
20 3 32 V.A.C. A FSQA 203A PP203A
20 3 240 V.A.C. B FSQA 203B PP203B
20 3 240 V.A.C. C FSQA 203C PP203C
20 4 440 V.A.C. B FSQA 204B PP204B
20 4 440 V.A.C. C FSQA 204C PP204C
6-2
20 6 440 V.A.C. B FSQA 206B PP206B
32 4 440 V.A.C. B FSQA 324B PP324B
32 4 440 V.A.C. C FSQA 324C PP324C
32 6 440 V.A.C. B FSQA 326B PP326B
32 6 440 V.A.C. C FSQA 326C PP326C

Plugs & Receptacles - FNO
Technical Data
Zone 1 Zone 21 Zone 22
Gas Group IIB

FNO 63-100A interlocked receptacles are

used with the appropriate PP plug:
ors, portable pumps, hand lamps and
similar equipment
- Receptacle body - Copper free aluminium

- Receptacle sleeve - stainless steel
Standard Materials
- Pins - brass
- Receptacle - Grey polyurethane finish
Ordering Details
No. of
Locking
Current Pins Receptacle Plug
Voltage Arrange-
Rating (A) (incl. Catalogue No. Catalogue No.
ment
earth)
63 5 440V AC C FNO635B PP635B
63 5 440V AC C FNO635C PP635C
100A 5 440V AC C FNO1005B PP1005B
100A 5 440V AC C FNO1005C PP1005C
NOTE: Types A, B and C sockets are not interchangeable and will only
accept their respective plugs. However B sockets will also accept C plugs
but not visa versa.
Dimensional Data
A B C D E F G H J K
63-100A
130 235 200 9.5 34 235 135 360 200 40
6-3

Plugs & Receptacles - PP
Technical Data
Gas Group IIB

Approvals ANZEx 08.3011 & ANZEx 08.3012
PP plugs are used in conjunction with

FSQA & FNO explosion proof receptacles:
ors, portable pumps, hand lamps and sim-
ilar equipment
Plug Body
- Locking arrangement B - stainless steel
- Locking arrangements A&C - Gun metal
Standard Materials Entry Hub - Gun metal
Insulation - phenolic
Pins - Brass
Options Corrosion free powder polyester finish
Ordering Details
No. of Entry No. of Entry

Current Locking Current Locking
Pins Receptacle Size Pins Receptacle Size
Rating Voltage Arrange- Rating Voltage Arrange-
(incl. Cat No. for Cable (incl. Cat No. for Cable
(A) ment (A) ment
earth) Glands earth) Glands
10 3 240 V.A.C. B PP103B 25mm 20 6 440 V.A.C. B PP206B 32mm
10 3 240 V.A.C. C PP103C 25mm 32 4 440 V.A.C. B PP324B 25mm
10 4 440 V.A.C. B PP104B 25mm 32 4 440 V.A.C. C PP324C 25mm
10 4 440 V.A.C. C PP104C 25mm 32 6 440 V.A.C. B PP326B 32mm
16 3 32 V.A.C. A PP163A 25mm 32 6 440 V.A.C. C PP326C 32mm
16 3 240 V.A.C. C PP163C 25mm 63 5 440 V.A.C. C PP635C 40mm
16 6 440 V.A.C. C PP166C 32mm 100 5 440 V.A.C. C PP1005C 40mm
20 3 32 V.A.C. A PP203A 25mm
20 3 240 V.A.C. B PP203B 25mm
20 3 240 V.A.C. C PP203C 25mm
20 4 440 V.A.C. B PP204B 25mm
20 4 440 V.A.C. C PP204C 25mm
6-4

Plugs & Receptacles - GHG
Technical Data
Type of Protection Ex de, T6, Ex tD, A21, T600C
Gas Group IIC
IEC Ex BKI04.0002 (16A)

IEC Ex BKI04.0006 (32A)
Approvals
IEC Ex BKI04.0004 (63A)
IEC Ex BKI04.0005 (125A)
GHG interlocked plugs & receptacles are

used:
ors, portable pumps, hand lamps and sim-
ilar equipment
High impact, corrosion resistant fibre glass
re-inforced polyester
Standard Materials Factory built internal brass plate for steel
wire armoured applications - gland not
included with metal entries
Options Transformer plug
Dimensional Data
16A Type / No. of Poles 32A Type / No. of Poles

3p 4p 5p 4p 5p
B 90 110 110 B 120 120
XB 80 100 100 XB 110 110
T 121 147 147 T 166 168
H 223 236 236 H 285 293
XH 115 135 135 XH 170 170
L 155 175 175 L 205 205
16/32A
6-5
63A 125A

Plugs & Receptacles - GHG
Ordering Details
Description Terminal Capacity Catalogue No.
Switch socket 16A, 2P, 24Vac/dc, 2 x M20 2 x 1.5 - 4 mm2 GHG5134200R0001

Plug, 16A, 2P, 24V ac/dc, 9-17mm 1.0 - 4 mm2 GHG5422200V0000
Switch socket 16A, 3P, 24Vac/dc, 2 x M20 2 x 1.5 - 4 mm2 GHG5134312R0001

Plug, 16A, 3P, 24V ac/dc, 9-17mm 1.0 - 4 mm2 GHG5422312V0000
Switch socket 16A, 3P, 110-130Vac, 2 x M20 metal entries 2 x 1 - 4 mm2 GHG5114304R3001
Switch coupler, 16A, 3P, 110-130Vac, 8-19mm 2 x 1 - 4 mm 2 GHG5113304R0001
Plug, 16A, 3P, 110-130Vac, 8-19mm 1 x 1 - 2.5 mm 2 GHG5117304R0001
Switch coupler, 16A, 3P, 200-250Vac, 8-19mm 2 x 1 - 4 mm2 GHG5113306R0001
Plug, 16A, 3P, 200-250Vac, 8-19mm 1 x 1 - 2.5 mm2 GHG5117306R0001
Plug, 16A, 4P, 380-415Vac, 12-21mm 1 x 1 - 2.5 mm 2 GHG5117506R0001
Plug, 32A, 4P, 380-415Vac, 17-28mm 1 x 1 - 6 mm2 GHG5127406R0001
Plug, 63A, 4P, 380-415Vac, 19-34mm 1 x 4 - 16 mm 2 GHG5147406R0001
6-6

Plugs & Receptacles - Ex Link
Technical Data
Type of Protection Ex de, Ex td, A21, T520C
Gas Group IIC
Approvals IECEx BKI 06.005X
Ex-Link is a complete system for safely

connecting & disconnecting hazardous
area equipment in Zone 1 conditions.
Application
Ex-Link is used for direct installation into
standard cable entries on hazardous area
equipment & junction boxes.
Standard Materials Refer table
Ordering Details
GHG 57X X X XX R X X 0 X
Product Identifier
Crimp Technology
Version 1 - Crimp up to 1.5mm2
1 - 4 pole 2 - Crimp up to 2.5mm2 Dia Connection
4 - 4 pole + PE 6 - Cage clamp Cable
Type 1 - 4 – 7,5 mm
1 - Elbow /12 – 21 mm2
3 - Coupler 2 - 7,5 – 11 mm
6 - Inlet >200cm3
7 - Plug
8 - Receptable
9 - Inlet
Coding
01 - 1 h / Ethernet1
02 - 2 h / Bus
Material
03 - 3 h / Special code1
0 - Plastic
04 - 4 h / 110 V AC 2p + PE
1 - Stainless steel AISI 316L Accessories
05 - 5 h / 24 V DC 4p + PE1
2 - Stainless steel AISI 316L for armoured cables 0 - without locking device
06 - 6 h / 230 V AC 2p + PE
3 - Nickel-plated brass 8 - Protection cap for plug
4 - Nickel-plated brass for armoured cables 9 - with locking device
08 - 8 h / 24 V DC 4p
5 - Stainless steel AISI 316L NPT
6 - Nickel-plated brass NPT
6-7
10 - 10 h / 230 V AC 4p + PE1
12 - 12 h / 24 V AC 2p + PE

Plugs & Receptacles - Ex Link
Possible Configurations
Cable etnries dia 12-21.5mm

15cm multi wire 1.5mm2

Nickel Plated Brass
xx cm multi wire*
Criimp 1.5mm2
Criimp 2.5mm2
Stainless steel
Cage clamp
M20 x 1.5
1/2” NPT
Plastic
Solder
Plug 4-pole1 X X X X X X X X X
Plug 4-pole + PE X X X X X X X X
Coupler 4-pole X X X X X X X X X
Coupler 4-pole + PE X X X X X X X X
Plug for armoured cables 4-pole X X X X X X X
Plug for armoured cables 4-pole + PE X X X X X X
Coupler for armoured cables 4-pole X X X X X X X
Coupler for armoured cables 4-pole + PE X X X X X X
Inlet for Ex e enclosure X X X X X X X X X X X X X
Inlet for Ex d enclosure < 2000 cm3 X X X X X X X X X
Inlet for Ex d enclosure > 2000 cm3 X X X X X X X X X
Receptacle for Ex e enclosure X X X X X X X X X X X X X
Receptacle for Ex d enclosure X X X X X X X X X
Elbow for Ex e enclosure X X X X X
Elbow for Ex d enclosure X X X X
Please consult factory or refer to www.ceag.de for further ordering details
6-8

For more information:
If further assistance is required, please contact an authorized Cooper Crouse-Hinds Distributor,
Sales Office, or Customer Service Department.
Cooper Crouse-Hinds (Global HQ) Cooper Crouse-Hinds Pauluhn Cooper Crouse-Hinds GmbH
Wolf & Seventh North Streets 1616 N Main St Neuer Weg-Nord 49
Syracuse, NY 13221 Pearland, TX 77581 Eberbach, Germany D-69412
(866) 764-5454 (281) 485-4311 49 (0) 6271 806-500
FAX: (315) 477-5179 FAX: (281) 485-4398 FAX: 49 (0) 6271 806-476
[email protected] [email protected] [email protected]
Cooper Crouse-Hinds Cooper Crouse-Hinds

MTL Instruments Airport Lighting
Great Marlings, Butterfield 1200 Kennedy Road
Luton UK LU2 8DL Windsor, CT 06095
+44 (0)1582 723633 (860) 683-4354
FAX: +44 (0)1582 422283 FAX: (860) 683-4354
[email protected] [email protected]
Cooper Crouse-Hinds Regional Offices Mexico/Latin America/Caribbean: Canada (Pauluhn):

52-555-804-4000 888-675-5483
Australia: FAX: 52-555-804-4020 [email protected]
61-2-8787-2777 [email protected]
FAX: 61-2-9609-2342
[email protected] Saudi Arabia: Middle East (Dubai):
966 3 812 2236 971 4 4272500
China: FAX: 966 3 812 1291 FAX: 971 4 4298521
86-21-2899-3600
FAX: 86-21-2899-4055 India: Korea:
[email protected] 91-124-4683888 82 2 538 3425
FAX: 91-124-4683899 FAX: 82 2 538 3505
Canada: [email protected] [email protected]
800-265-0502
FAX: (800) 263-9504 Brazil: Singapore:
FAX Orders only: (866) 653-0645 +55 15 3238 3970 65-6297-4849
FAX: +55 15 3238 3976 FAX: 65-6297-4819
[email protected] [email protected]
www.crouse-hinds.com Colombia: UK:

Cooper Crouse-Hinds is a registered trademark + (57.1) 670 0315 +44 247-630-89 30
of Cooper Industries, Plc. FAX: + (57.1) 670 0376 FAX: +44 247-630-10 27
©2010 Cooper Industries, Plc. [email protected] [email protected]
Your Authorized Cooper Crouse-Hinds Distributor is:
Cooper Industries, Ltd.

600 Travis, Ste. 5800
Houston, TX 77002-1001
P：713-209-8400
www.cooperindustries.com
Valid from June 2010 ©2010 Cooper Industries, Plc.

CCH Full Brochure

Uploaded by

Copyright:

Available Formats

CCH Full Brochure

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CCH Full Brochure

Uploaded by

Copyright:

Available Formats

Catalogue

For more than a century, companies have

By integrating a comprehensive line of electrical and

The more demanding the

June, 2010 Copyright© Cooper Industries

Section 6 Plugs & Receptacles

The product information published in our catalogs and literature

All statements, technical information and recommendations

All sales of Cooper Crouse-Hinds products are specifically

Copyright© Cooper Industries June, 2010

1 Application Protection Techniques

5 Hazardous Area Lighting

6 Hazardous Area Plugs & Receptacles

A table of contents appears in the front of each section listing

To help make the catalogue easier to use, a common location

The product information published in our catalogues and litera-

All statements, technical information and recommendations con-

June, 2010 Copyright© Cooper Industries

Typical Installation Reference ..........................................1-2

Copyright© Cooper Industries June, 2010

June, 2010 Copyright© Cooper Industries

ADE1F, ADE4F ADE1F, ADE4F ADE1F, ADE4F

Control Stations DSA, DSEA DSA, DSEA DSEA

Custom Built JBD, JBDC

Large Junction EJBA, GHG74, EJBA, GHG74,

AB12, AEV, AEVBH, AB12, AEV, AEVBH,

CPBA, EJB, EJBA, CPBA, EJB, EJBA,

FNO, GHG5, FNO, GHG5,

DSA, DSEA, EBA, DSA, DSEA, EBA,

Motor Starters EMA, ESDA, GHG61 EMA, ESDA, GHG61

Copyright© Cooper Industries June, 2010

Exd Exe Exn ExtD

Cast Iron Steel

High Tensile Brass

June, 2010 Copyright© Cooper Industries

The growth of the industries using explosion protected

Improvements in electrical technology have resulted in the The Operating Environment

All these techniques, with the exception of Exm (hermeti-

In addition, Standards Australia runs a certification scheme

Copyright© Cooper Industries June, 2010

Liquids, Gases & Vapours

1-6 ZONE 0 CONTINUOUSLY HAZARDOUS

ZONE 1 FREQUENTLY HAZARDOUS

ZONE 2 INFREQUENTLY HAZARDOUS

Dusts, Fibres & Flyings

ZONES 21 & 22 DUST PRESENT IN AIR

June, 2010 Copyright© Cooper Industries

Explosion Protection Techniques Commonly Used in Australia

Ex nR Restricted Avoidance Lighting and junction boxes cannot be used

Note: The Australian Wiring Rules AS3000 applies to all installations.

Copyright© Cooper Industries June, 2010

T Ratings (temperature ratings)

1-8 The Maximum Surface Temperature of Electrical Equipment

Max Surface NEC IEC

June, 2010 Copyright© Cooper Industries

Degree of Protection Provided By Equipment

X Protection unspecified (untested) X Protection unspecified (untested)

O No special protection provided O No special protection provided

3 Protection against objects larger than