Scribd
Upload
372 views3 pages

GT2-71D US en-US

The GT2-71D is a DIN rail mount pulse output amplifier unit that operates from 10 to 30 VDC power. It has selectable pulse resolutions from 0.1 to 10 μm and minimum phase differences of 0.5 to 25 μs. The unit has indicator lights for power, alarms, pulse output, and input. It outputs a 90 degree phase shifted differential square wave signal at +5 V compatible with EIA-422 standards. The unit is resistant to temperatures from -10 to 50 degrees C and humidity from 35-85% RH.

Uploaded by

Kenan Hebibovic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
372 views3 pages

GT2-71D US en-US

The GT2-71D is a DIN rail mount pulse output amplifier unit that operates from 10 to 30 VDC power. It has selectable pulse resolutions from 0.1 to 10 μm and minimum phase differences of 0.5 to 25 μs. The unit has indicator lights for power, alarms, pulse output, and input. It outputs a 90 degree phase shifted differential square wave signal at +5 V compatible with EIA-422 standards. The unit is resistant to temperatures from -10 to 50 degrees C and humidity from 35-85% RH.

Uploaded by

Kenan Hebibovic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Data Sheet

GT2­71D
Amplifier Unit, Pulse Output Type

SPECIFICATIONS

Model GT2­71D

Mounting method DIN rail mount

Power supply voltage 10 to 30 VDC, including 10 % ripple (P­P), Class 2

Rating Power consumption 1,600 mW or less (at 30 V: 53.3 mA or less)

Number of expandable units Cannot be extended

Indicator lamp Power (green), alarm (red), pulse output (green), input (green)

Pulse resolution 0.1 μm 0.004 Mil, 0.5 μm 0.02 Mil, 1 μm 0.04 Mil, 10 μm 0.039 Mil (selectable)

Minimum phase difference 0.5 μs, 2.5 μs, 5 μs, 25 μs (selectable)

Control input origin return No­voltage input (with contacts, without contacts), input time: 20 ms or more

Output signal 90 ° phase difference from the A, B, and Z phases; differential square wave (conforms to EIA­422)

Output signal level +5 V

Environmental resistance Ambient temperature ­10 to +50 °C 14 to 122 °F (No freezing)

Relative humidity 35 to 85 % RH (No condensation)

Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Materials Polycarbonate (PC)

Weight Approx. 110 g (including the power supply cable)

KEYENCE AMERICA 1­888­KEYENCE(Toll Free) http://www.keyence.com/ 2017/12/06 Page:1/3


Data Sheet

Dimensions

KEYENCE AMERICA 1­888­KEYENCE(Toll Free) http://www.keyence.com/ 2017/12/06 Page:2/3


Data Sheet

I/O Circuit Connection diagram

Pulse output amplifier unit (GT2­71D)
I/O circuit

* For details of the external input, refer to the diagram of the external input circuit.

Pulse output amplifier unit (GT2­71D)
External input circuit
Recommended input device

KEYENCE AMERICA 1­888­KEYENCE(Toll Free) http://www.keyence.com/ 2017/12/06 Page:3/3

You might also like