JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

(Established by Govt. of A.P., Act. No. 30 of 2008)

ANANTHAPURAMU 515 002 (A.P) INDIA

Course Structure for B.Tech. - R15 Regulations

COMPUTER SCIENCE & ENGINEERING

I-II Semester

Course
S.No Subject Th Tu/Drg/Lab Credits
code
1. 15A52201 English for Professional 3 1 - - 3
Communication
2. 15A54201 Mathematics II 3 1 - - 3
3. 15A05201 Data Structures 3 1 - - 3
4. 15A51101 Engineering Chemistry 3 1 - - 3
5. 15A01101 Environmental Studies 3 1 - 3
6. 15A05202 Data Structures Lab - - - 4 2
7. 15A51102 Engineering Chemistry - - - 4 2
Lab
8. 15A99201 Engineering & IT - - - 4 2
Workshop
15 5 12 21

1
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) T Tu C
3 1 3
(15A52201) ENGLISH FOR PROFESSIONAL COMMUNICATION
1. INTRODUCTION:
English is a global language and has international appeal and
application. It is widely used in a variety of contexts and for varied
purposes. The students would find it useful both for social and
professional development. There is every need to help the students acquire
skills useful to them in their career as well as workplace. They need to
write a variety of documents and letters now extending into professional
domain that cuts across business and research also. The syllabus has
been designed to enhance communication skills of the students of
engineering and pharmacy. The prescribed book serves the purpose of
preparing them for everyday communication and to face the global
competitions in future.
The text prescribed for detailed study focuses on LSRW skills and
vocabulary development. The teachers should encourage the students to
use the target language. The classes should be interactive and learner-
centered. They should be encouraged to participate in the classroom
activities keenly.
In addition to the exercises from the text done in the class, the teacher
can bring variety by using authentic materials such as newspaper articles,
advertisements, promotional material etc.
2. OBJECTIVES:
1. To develop confidence in the students to use English in everyday
situations.
2. To enable the students to read different discourses so that they
appreciate English for science and technologies.
3. To improve familiarity with a variety of technical writings.
4. To enable the students to acquire structure and written expressions
required for their profession.
5. To develop the listening skills of the students.

3. SYLLABUS:
UNIT I
Topics: Group discussion, cause and effect, events and perspectives,
debate, if conditional, essay writing.

Text: LESSONS FROM THE PAST from MINDSCAPES

Importance of History - Differing Perspectives - Modern Corporatism -
Lessons From The Past

2
UNIT-II
Topics: Idioms, essay writing, power point presentation, modals, listening
and rewriting, preparing summary, debate, group discussion, role play,
writing a book review, conversation

Text: ENERGY from MINDSCAPES

Renewable and Non-Renewable Sources - Alternative Sources -Conservation
-Nuclear Energy

UNIT-III

Topics: Vocabulary, impromptu speech, creative writing, direct and

indirect speech, fixed expressions, developing creative writing skills, accents,
presentation skills, making posters, report writing

Text: ENGINEERING ETHICS from MINDSCAPES

Challenger Disaster - Biotechnology - Genetic Engineering - Protection From
Natural Calamities

UNIT-IV
Topics: Vocabulary, Conversation, Collocation, Group discussion, Note-
making, Clauses, Interpreting charts and tables , Report writing.

Text: TRAVEL AND TOURISM from MINDSCAPES

Advantages and Disadvantages of Travel - Tourism - Atithi Devo Bhava -
Tourism in India

UNIT-V
Topics: Vocabulary, phrasal verbs, writing a profile, connectives, discourse
markers, problem-solving, telephone skills, application letters, curriculum
vitae, interviews (telephone and personal)

Text: GETTING JOB-READY from MINDSCAPES

SWOT Analysis - Companies And Ways Of Powering Growth - Preparing For
Interviews

Prescribed Text
MINDSCAPES: English for Technologists and Engineers, Orient Blackswan,
2014.

3
REFERENCES:

1. Effective Tech Communication, Rizvi,Tata McGraw-Hill

Education, 2007.
2. Technical Communication, Meenakshi Raman, Oxford University Press.
3. English Conversations Prcatice, Grant Taylor, Tata Mc GrawHill
publications,2013.
4.Practical English Grammar. Thomson and Martinet, OUP, 2010.

Expected Outcomes:
At the end of the course, students would be expected to:
1. Have acquired ability to participate effectively in group discussions.
2. Have developed ability in writing in various contexts.
3. Have acquired a proper level of competence for employability.

4
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) T Tu C
3 1 3

(15A54201) MATHEMATICS II
(Common to All Branches)
Objectives: Our emphasis will be more on conceptual understanding and
application of Fourier series, Fourier, Z and Laplace transforms and solution
of partial differential equations.

UNIT I
Laplace transform of standard functions Inverse transform First shifting
Theorem, Transforms of derivatives and integrals Unit step function
Second shifting theorem Diracs delta function Convolution theorem
Laplace transform of Periodic function.
Differentiation and integration of transform Application of Laplace
transforms to ordinary differential equations of first and second order.
UNIT II
Fourier Series: Determination of Fourier coefficients Fourier series Even
and odd functions Fourier series in an arbitrary interval Even and odd
periodic continuation Half-range Fourier sine and cosine expansions-
Parsevals formula- Complex form of Fourier series.
UNIT III
Fourier integral theorem (only statement) Fourier sine and cosine
integrals. Fourier transform Fourier sine and cosine transforms
Properties Inverse transforms Finite Fourier transforms.

UNIT IV
Formation of partial differential equations by elimination of arbitrary
constants and arbitrary functions Method of separation of variables
Solutions of one dimensional wave equation, heat equation and two-
dimensional Laplaces equation under initial and boundary conditions.
UNIT V
z-transform Inverse z-transform Properties Damping rule Shifting rule
Initial and final value theorems. Convolution theorem Solution of
difference equations by z-transforms.

TEXT BOOKS:
1. Higher Engineering Mathematics, B.S.Grewal, Khanna publishers.
2. Engineering Mathematics, Volume - II, E. Rukmangadachari Pearson
Publisher.

5
REFERENCES:
1. Mathematical Methods by T.K.V. Iyengar, B.Krishna Gandhi,
S.Ranganatham and M.V.S.S.N.Prasad S. Chand publication.
2. Higher Engineering Mathematics, by B.V.Ramana, Mc Graw Hill
publishers.
3. Advanced Engineering Mathematics, by Erwin Kreyszig, Wiley India.

Outcomes:The student gains the knowledge to tackle the engineering

problems using the concepts of Fourier series, various transforms and
partial differential equations.

6
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) T Tu C
3 1 3
(15A05201) DATA STRUCTURES
(Common to CSE and IT branches of Engineering)

Objectives:
Understand different Data Structures
Understand Searching and Sorting techniques

Unit-1

Introduction and overview: Asymptotic Notations, One Dimensional array-

Multi Dimensional array- pointer arrays.
Linked lists: Definition- Single linked list- Circular linked list- Double
linked list- Circular Double linked list- Application of linked lists.

Unit-2
Stacks: Introduction-Definition-Representation of Stack-Operations on
Stacks- Applications of Stacks.
Queues: Introduction, Definition- Representations of Queues- Various
Queue Structures- Applications of Queues. Tables: Hash tables.

Unit-3
Trees: Basic Terminologies- Definition and Concepts- Representations of
Binary Tree- Operation on a Binary Tree- Types of Binary Trees-Binary
Search Tree, Heap Trees, Height Balanced Trees, B. Trees, Red Black Trees.
Graphs: Introduction- Graph terminologies- Representation of graphs-
Operations on Graphs- Application of Graph Structures: Shortest path
problem- topological sorting.

Unit-4
Sorting : Sorting Techniques- Sorting by Insertion: Straight Insertion sort-
List insertion sort- Binary insertion sort- Sorting by selection: Straight
selection sort- Heap Sort- Sorting by Exchange- Bubble Sort- Shell Sort-
Quick Sort-External Sorts: Merging Order Files-Merging Unorder Files-
Sorting Process.

Unit-5
Searching: List Searches- Sequential Search- Variations on Sequential
Searches- Binary Search- Analyzing Search Algorithm- Hashed List
Searches- Basic Concepts- Hashing Methods- Collision Resolutions- Open
Addressing- Linked List Collision Resolution- Bucket Hashing.

7
Text Books:

1. Classic Data Structures, Second Edition by Debasis Samanta, PHI.

2. Data Structures A Pseudo code Approach with C, Second Edition by
Richard F. Gilberg, Behrouz A. Forouzan, Cengage Learning.

Reference Books:

1. Fundamentals of Data Structures in C Horowitz, Sahni, Anderson-

Freed, Universities Press, Second Edition.
2. Schaum Outlines Data Structures Seymour Lipschutz McGrawHill-
Revised First Edition.
3. Data structures and Algorithms using C++, Ananda Rao Akepogu and
Radhika Raju Palagiri, Pearson Education.

8
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) T Tu C
3 1 3
(15A51101) ENGINEERING CHEMISTRY
(Common to All Branches)
Objectives:
The Engineering Chemistry course for undergraduate students is
framed to strengthen the fundamentals of chemistry and then build
an interface of theoretical concepts with their industrial/engineering
applications.
The course main aim is to impart in-depth knowledge of the subject
and highlight the role of chemistry in the field of engineering.
The lucid explanation of the topics will help students understand the
fundamental concepts and apply them to design engineering materials
and solve problems related to them. An attempt has been made to
logically correlate the topic with its application.
The extension of fundamentals of electrochemistry to energy storage
devices such as commercial batteries and fuel cells is one such
example.
After the completion of the course, the student would
understand the concepts of chemistry and apply to various
materials for engineering applications.

UNIT I WATER QUALITY AND TREATMENT

Impurities in water, Hardness of water and its Units, Disadvantages of hard
water, Estimation of hardness by EDTA method, Numerical problems on
hardness, Estimation of dissolved oxygen, Alkalinity, acidity and chlorides in
water, Water treatment for domestic purpose (Chlorination, Bleaching
powder, ozonisation)
Industrial Use of water:
For steam generation, troubles of Boilers: Scale & Sludge, Priming and
Foaming, Caustic Embrittlement and Boiler Corrosion.
Treatment of Boiler Feed water:
Internal Treatment: Colloidal, Phosphate, Carbonate, Calgon and sodium
aluminate treatment.
External Treatment: Ion-Exchange and Permutit processes.
Demineralisation of brackish water: Reverse Osmosis and Electrodialysis

UNIT II POLYMERS
i)Introduction: Basic concepts of polymerisation, Types of poloymerisation
(Chain Growth (Addition), Step growth (Condensation)), Mechanism:
cationic, anionic, free radical and coordination covalent.
Plastomers: Thermosetting and Thermoplatics, Preparation, properties and
Engineering applications of PVC, Teflon, Bakelite and nylons.
Elastomers
Natural Rubber; Processsing of natural rubbers, Compounding of Rubber

9
Synthetic Rubber: Preparation, properties and engineering applications of
Buna-S, Buna-N, Polyurethene, Polysulfide (Thiokol) rubbers
ii) Conducting polymers: Mechanism, synthesis and applications of
polyacetyline, polyaniline.
iii) Inorganic Polymers: Basic Introduction, Silicones, Polyphospazins (-(R)2-
P=N-) applications

UNIT III ELECTROCHEMISTRY

i) Galvanic cells, Nernest Equation, Numerical calculations, Batteries:
Rechargeable batteries (Lead acid, Ni-Cd, Lithium Ion Batteries),Fuels cells:
(Hydrogen-Oxygen and Methanol-Oxygen, Solid oxide)
ii) Corrosion: Introduction, type of corrosion (Concentration cell corrosion,
Galvanic corrosion), Chemical (Dry) and Electrochemical (Wet) Theory of
corrosion. Galvanic series, factors affecting the corrosion (Metal and
environment). Prevention: Cathodic protection (Sacrificial anode and
impressed current), Inhibitors (Anodic and cathodic), electroplating (Copper,
nickel and chromium) and electroless plating (Copper and nickel)

UNIT IV FUELS AND COMBUSTION

Classifications of Fuels Characteristics of Fuels- Calorific Value Units,
Numerical Problems.
Solid Fuels: Coal-Classification and Analysis (proximate and ultimate), Coke
:Characteristics of metallurgical coke, Manufacture of Metallurgical Coke by
Otto Hoffmanns by product oven processes.
Liquid Fuels:
Petroleum: Refining of Petroleum, Gasoline- Octane Number, Diesel -Cetane
Number, Synthetic Petrol: Bergius Processes, Fischer Trophs synthesis
Power Alcohol: Manufacture, Advantages and Disadvantages of Power
Alcohol
Gaseous Fuels: Natural gas, Producer gas, Water gas, Coal gas and Biogas.
Determination calorific value of Gases fuels by Junkers calorimeter.
Combustion: Basic principles and numerical problems, Flue Gas analysis by
Orsats apparatus.

UNIT V CHEMISTRY OF ENGINEERING MATERIALS

i) Cement: Composition, Classification, preparation (Dry and Wet processes),
Setting and Hardening (Hydration and Hydrolysis)
ii) Refractories: Introduction, Classification , properties and applications
iii) Lubricants: Introduction, classification (Solid, liquid, semi solid,
emulsion and synthetic),Theory of lubrication (Thin film, Thick film &
Extreme pressure) , properties of lubricants and applications.
iv) Carbon clusters: Fullerenes and Carbon Nano Tubes (CNT)

Text Books:
1. Engineering Chemistry, First Edition, Jayaveera KN, Subba Reddy
GVand Ramachandraiah C, McGraw Hill Higher Education, New
Delhi, 2013.
2. A Text Book of Enigneering Chemistry, 15th Edition, Jain and Jain,
Dhanapathi Rai
Publications, New Delhi, 2013.
10
References:
1. A Text book of Engineering Chemistry, 12th Edition, SS Dhara,Uma, S.
Chand Publications, New Delhi, 2010.
2. Engineering Chemistry, First edition, K.B. Chandra Sekhar, UN.Das
and Sujatha Mishra, SCITECH Publications India Pvt Limited, 2010.
3. Engineering Chemistry, First edition, Seshamaheswaramma K and
Mridula Chugh, Pearson Education, 2013.

Outcomes: The student is expected to:

Differentiate between hard and soft water. Understand the
disadvantages of using hard water domestically and industrially.
Select and apply suitable treatments domestically and industrially.
Understand the electrochemical sources of energy
Understand industrially based polymers, various engineering materials.

11
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) T Tu C
3 1 3
(15A01101) ENVIRONMENTAL STUDIES
OBJECTIVE: To make the students to get awareness on environment, to
understand the importance of protecting natural resources, ecosystems for
future generations and pollution causes due to the day to day activities of
human life to save earth from the inventions by the engineers.
UNIT I
MULTIDISCIPLINARY NATURE OF ENVIRONMENTAL STUDIES:
Definition, Scope and Importance Need for Public Awareness.
NATURAL RESOURCES : Renewable and non-renewable resources
Natural resources and associated problems Forest resources Use and
over exploitation, deforestation, case studies Timber extraction Mining,
dams and other effects on forest and tribal people Water resources Use
and over utilization of surface and ground water Floods, drought, conflicts
over water, dams benefits and problems Mineral resources: Use and
exploitation, environmental effects of extracting and using mineral
resources, case studies Food resources: World food problems, changes
caused by agriculture and overgrazing, effects of modern agriculture,
fertilizer-pesticide problems, water logging, salinity, case studies. Energy
resources:
UNIT II
ECOSYSTEMS: Concept of an ecosystem. Structure and function of an
ecosystem Producers, consumers and decomposers Energy flow in the
ecosystem Ecological succession Food chains, food webs and ecological
pyramids Introduction, types, characteristic features, structure and
function of the following ecosystem:
a. Forest ecosystem.
b. Grassland ecosystem
c. Desert ecosystem

12
 d. Aquatic ecosystems (ponds, streams, lakes, rivers, oceans,
estuaries)

BIODIVERSITY AND ITS CONSERVATION : Introduction 0 Definition:

genetic, species and ecosystem diversity Bio-geographical classification of
India Value of biodiversity: consumptive use, Productive use, social,
ethical, aesthetic and option values Biodiversity at global, National and
local levels India as a mega-diversity nation Hot-sports of biodiversity
Threats to biodiversity: habitat loss, poaching of wildlife, man-wildlife
conflicts Endangered and endemic species of India Conservation of
biodiversity: In-situ and Ex-situ conservation of biodiversity.
UNIT III
ENVIRONMENTAL POLLUTION: Definition, Cause, effects and control
measures of :
a. Air Pollution.
b. Water pollution
c. Soil pollution
d. Marine pollution
e. Noise pollution
f. Thermal pollution
g. Nuclear hazards

SOLID WASTE MANAGEMENT : Causes, effects and control measures of

urban and industrial wastes Role of an individual in prevention of
pollution Pollution case studies Disaster management: floods,
earthquake, cyclone and landslides.
UNIT IV
SOCIAL ISSUES AND THE ENVIRONMENT: From Unsustainable to
Sustainable development Urban problems related to energy Water
conservation, rain water harvesting, watershed management Resettlement
and rehabilitation of people; its problems and concerns. Case studies
Environmental ethics: Issues and possible solutions Climate change,
global warming, acid rain, ozone layer depletion, nuclear accidents and

13
holocaust. Case Studies Wasteland reclamation. Consumerism and
waste products. Environment Protection Act. Air (Prevention and Control
of Pollution) Act. Water (Prevention and control of Pollution) Act Wildlife
Protection Act Forest Conservation Act Issues involved in enforcement of
environmental legislation Public awareness.
UNIT V
HUMAN POPULATION AND THE ENVIRONMENT: Population growth,
variation among nations. Population explosion Family Welfare
Programmed. Environment and human health Human Rights Value
Education HIV/AIDS Women and Child Welfare Role of information
Technology in Environment and human health Case studies.
FIELD WORK : Visit to a local area to document environmental assets
River/forest grassland/hill/mountain Visit to a local polluted site-
Urban/Rural/Industrial/Agricultural Study of common plants, insects, and
birds river, hill slopes, etc..
TEXT BOOKS :
1. Text book of Environmental Studies for Undergraduate Courses by
Erach Bharucha for University Grants Commission, Universities
Press.
2. Environmental Studies by Kaushik, New Age Pubilishers.
REFERENCES :
1. Environmental studies by R.Rajagopalan, Oxford University Press.
2. Comprehensive Environmental studies by J.P.Sharma, Laxmi
publications.
3. Introduction to Environmental engineering and science by Gilbert M.
Masters and Wendell P. Ela - Printice hall of India Private limited.
Outcomes :
(1) Students will get the sufficient information that will clarify modern
environmental concepts like equitable use of natural resources, more
sustainable life styles etc.
(2) Students will realize the need to change their approach so as to
perceive our own environmental issues correctly, using practical
approach based on observation and self learning.

14
 (3) Students become conversant with the fact that there is a need to
create a concern for our environment that will trigger pro-
environmental action; including simple activities we can do in our
daily life to protect it.
(4) By studying environmental sciences, students is exposed to the
environment that enables one to find out solution of various
environmental problems encountered on and often.
At the end of the course, it is expected that students will be able to identify
and analyze environmental problems as well as the risks associated with
these problems and efforts to be taken to protect the environment from
getting polluted. This will enable every human being to live in a more
sustainable manner.

15
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) P C
4 2
(15A05202) DATA STRUCTURES LAB
(Common to CSE & IT Branches of Engineering)
Course Objectives:

To strengthen the ability to identify and apply the suitable data

structure for the given real world problem

Course Outcomes:
Apply problem solving techniques to find solutions to problems
Able to identify the appropriate data structure for a given problem or
application.
Improve logical skills

List of Experiments/Tasks

1. Write a program to sort the elements of an array using sorting by

exchange.
2. Write a program to sort the elements of an array using Selection Sort.
3. Write a program to implement heap sort.
4. Write a program to perform Linear Search on the elements of a given
array.
5. Write a program to perform Binary Search on the elements of a given
array.
6. Write a program to convert infix expression to postfix expression and
evaluate postfix expression.
7. Write a program to implement stack, queue, circular queue using
arrays and linked lists.
8. Write a program to perform the operations creation, insertion,
deletion, and traversing a singly linked list.
9. Write a program to perform the operations creation, insertion,
deletion, and traversing a Doubly linked list.

10. Write a program to remove duplicates from ordered and unordered

arrays.

11.Write a program to sort numbers using insertion sort.

16
 12.Write a program to implement quick sort using non-recursive and
recursive approaches. Use randomized element as partitioning
element.
13.Write a program to search a word in a given file and display all its
positions.
14.Write a program for tic-tac-toe game.
15.Write a program to perform operations creation, insertion, deletion
and traversing on a binary search tree.
16.Write a program to implement depth first search and breadth first
search on graphs.
17.Write a program to perform different operations on Red Black trees.
18. Write a program to implement external sorting.
19.Write a program to perform different operations of B Tree.

Note:
1. Instructors are advised to conduct the lab in LINUX/UNIX
environment

2. The above list consists of only sample programs. Instructors may

choose other programs to illustrate certain concepts, wherever is
necessary. Programs should be there on all the concepts studied in
Theory. Instructors are advised to change atleast 25% of the programs
every year until the next syllabus revision.

References:

1. Fundamentals of Data Structures in C, Horowitz, Sahni, Anderson-

freed, Second Edition, Universities Press.
2. Data structures and Algorithms using C++, Ananda Rao Akepogu and
Radhika Raju Palagiri, Pearson Education.

17
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) P C
4 2
(15A51102) ENGINEERING CHEMISTRY LAB
(Common to All Branches)
Objectives:
Will learn practical understanding of the redox reaction
Will learn the preparation and properties of synthetic polymers and
other material that would provide sufficient impetus to engineer these
to suit diverse applications
Will also learn the hygiene aspects of water would be in a position to
design methods to produce potable water using modern technology.

List of Experiments:
1. Determination of total hardness of water by EDTA method.
2. Determination of Copper by EDTA method.
3. Estimation of Dissolved Oxygen by Winklers method
4. Estimation of iron (II) using diphenylamine indicator (Dichrometry
Internal indicator method).
5. Determination of Alkalinity of Water
6. Determination of acidity of Water
7. Preparation of Phenol-Formaldehyde (Bakelite)
8. Determination of Viscosity of oils using Redwood Viscometer I
9. Determination of Viscosity of oils using Redwood Viscometer II
10. Determination of calorific value of gaseous fuels by Junkers
Calorimeter
11. Conductometric estimation of strong acid using standard sodium
hydroxide solution
12. Determination of Corrosion rate and inhibition efficiency of an
inhibitor for mild steel in hydrochloric acid medium.
13. Potentio metric determination of iron using standard potassium
dichromate
14. Colorometric estimation of manganese.
15. pH meter calibration and measurement of pH of water and various
other samples.
(Any 10 experiments from the above list)
References:
1. Vogels Text book of Quantitative Chemical Analysis, Sixth Edition
Mendham J et al, Pearson Education, 2012.
2. Chemistry Practical Lab Manual, First edition, Chandra Sekhar KB,
Subba Reddy GV and Jayaveera KN, SM Enterprises, Hyderabad,
2014.

18
Outcomes:
Would be confident in handling energy storage systems and would
be able combat chemical corrosion
Would have acquired the practical skill to handle the analytical
methods with confidence.
Would feel comfortable to think of design materials with the
requisite properties
Would be in a position to technically address the water related
problems.

19
2015-2016

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

ANANTHAPURAMU
B.Tech. I - II Sem. (CSE) P C
4 2
(15A99201) ENGINEERING & I.T. WORKSHOP

ENGINEERING WORKSHOP

Course Objective:
The budding Engineer may turn out to be a technologist, scientist, entrepreneur,
practitioner, consultant etc. There is a need to equip the engineer with the
knowledge of common and newer engineering materials as well as shop
practices to fabricate, manufacture or work with materials. Essentially he
should know the labour involved, machinery or equipment necessary, time
required to fabricate and also should be able to estimate the cost of the product
or job work. Hence engineering work shop practice is included to introduce
some common shop practices and on hand experience to appreciate the use of
skill, tools, equipment and general practices to all the engineering students.

1. TRADES FOR EXERCISES:

a. Carpentry shop Two joints (exercises) involving tenon and mortising,
groove and tongue: Making middle lap T joint, cross lap joint, mortise
and tenon T joint, Bridle T joint from out of 300 x 40 x 25 mm soft
wood stock
b. Fitting shop Two joints (exercises) from: square joint, V joint, half
round joint or dove tail joint out of 100 x 50 x 5 mm M.S. stock
c. Sheet metal shop Two jobs (exercises) from: Tray, cylinder, hopper or
funnel from out of 22 or 20 guage G.I. sheet
d. House-wiring Two jobs (exercises) from: wiring for ceiling rose and
two lamps (bulbs) with independent switch controls with or without
looping, wiring for stair case lamp, wiring for a water pump with
single phase starter.
e. Foundry Preparation of two moulds (exercises): for a single pattern
and a double pattern.
f. Welding Preparation of two welds (exercises): single V butt joint, lap
joint, double V butt joint or T fillet joint.

2. TRADES FOR DEMONSTRATION:

a. Plumbing
b. Machine Shop
c. Metal Cutting
Apart from the above the shop rooms should display charts, layouts, figures,
circuits, hand tools, hand machines, models of jobs, materials with names
such as different woods, wood faults, Plastics, steels, meters, gauges,
equipment, CD or DVD displays, First aid, shop safety etc. (though they may
not be used for the exercises but they give valuable information to the

20
student). In the class work or in the examination knowledge of all shop
practices may be stressed upon rather than skill acquired in making the job.
References:
1. Engineering Work shop practice for JNTU, V. Ramesh Babu, VRB
Publishers Pvt. Ltd., 2009
2. Work shop Manual / P.Kannaiah/ K.L.Narayana/ SciTech Publishers.
3. Engineering Practices Lab Manual, Jeyapoovan, SaravanaPandian, 4/e
Vikas
4. Dictionary of Mechanical Engineering, GHF Nayler, Jaico Publishing
House.

I.T. WORKSHOP
Course Objective:
To provide Technical training to the students on Productivity tools like
Word processors, Spreadsheets, Presentations
To make the students know about the internal parts of a computer,
assembling a computer from the parts, preparing a computer for use
by installing the operating system
To learn about Networking of computers and use Internet facility for
Browsing and Searching.
Learning Outcome:
Disassemble and Assemble a Personal Computer and prepare the
computer ready to use.
Prepare the Documents using Word processors
Prepare Slide presentations using the presentation tool
Interconnect two or more computers for information sharing
Access the Internet and Browse it to obtain the required information
Install single or dual operating systems on computer

Preparing your Computer ( 5 weeks)

Task 1: Learn about Computer: Identify the internal parts of a computer,
and its peripherals. Represent the same in the form of diagrams including
Block diagram of a computer. Write specifications for each part of a
computer including peripherals and specification of Desktop computer.
Submit it in the form of a report.
Task 2: Assembling a Computer: Disassemble and assemble the PC back
to working condition. Students should be able to trouble shoot the computer
and identify working and non-working parts. Student should identify the
problem correctly by various methods available (eg: beeps). Students should
record the process of assembling and trouble shooting a computer.
Task 3: Install Operating system: Student should install Linux on the
computer. Student may install another operating system (including
proprietary software) and make the system dual boot or multi boot.
Students should record the entire installation process.

21
Task 4: Operating system features: Students should record the various
features that are supported by the operating system(s) installed. They have
to submit a report on it. Students should be able to access CD/DVD drives,
write CD/DVDs, access pen drives, print files, etc. Students should install
new application software and record the installation process.

Networking and Internet (4 weeks)

Task 5: Networking: Students should connect two computers directly
using a cable or wireless connectivity and share information. Students
should connect two or more computers using switch/hub and share
information. Crimpling activity, logical configuration etc should be done by
the student. The entire process has to be documented.

Task 6: Browsing Internet: Student should access the Internet for

Browsing. Students should search the Internet for required information.
Students should be able to create e-mail account and send email. They
should get acquaintance with applications like Facebook, skype etc.
If Intranet mailing facility is available in the organization, then students
should share the information using it. If the operating system supports
sending messages to multiple users (LINUX supports it) in the same
network, then it should be done by the student. Students are expected to
submit the information about different browsers available, their features,
and search process using different natural languages, and creating e-mail
account.

Task 7: Antivirus: Students should download freely available Antivirus

software, install it and use it to check for threats to the computer being
used. Students should submit information about the features of the
antivirus used, installation process, about virus definitions, virus engine etc.

Productivity tools (6 weeks)

Task 8: Word Processor: Students should be able to create documents
using the word processor tool. Some of the tasks that are to be performed
are inserting and deleting the characters, words and lines, Alignment of the
lines, Inserting header and Footer, changing the font, changing the color,
including images and tables in the word file, making page setup, copy and
paste block of text, images, tables, linking the images which are present in
other directory, formatting paragraphs, spell checking, etc. Students should
be able to prepare project cover pages, content sheet and chapter pages at
the end of the task using the features studied. Students should submit a
user manual of the word processor considered.

22
Task 9: Spreadsheet: Students should be able to create, open, save the
application documents and format them as per the requirement. Some of the
tasks that may be practiced are Managing the worksheet environment,
creating cell data, inserting and deleting cell data, format cells, adjust the
cell size, applying formulas and functions, preparing charts, sorting cells.
Students should submit a user manual of the Spreadsheet application
considered.

Task 10: Presentations : creating, opening, saving and running the

presentations, Selecting the style for slides, formatting the slides with
different fonts, colors, creating charts and tables, inserting and deleting text,
graphics and animations, bulleting and numbering, hyperlinking, running
the slide show, setting the timing for slide show. Students should submit a
user manual of the Presentation tool considered.

Optional Tasks:
Task 11: Laboratory Equipment: Students may submit a report on
specifications of various equipment that may be used by them for the
laboratories in their curriculum starting from I B.Tech to IV. B.Tech. It can
vary from department to department. Students can refer to their syllabus
books, consult staff members of the concerned department or refer websites.
The following is a sample list. Instructors may make modifications to the list
to suit the department concerned.
Desktop computer
Server computer
Switch (computer science related)
Microprocessor kit
Micro controller kit
Lathe machine
Generators
Construction material
Air conditioner
UPS and Inverter
RO system
Electrical Rectifier
CRO
Function Generator
Microwave benches

23
Task 12: Software: Students may submit a report on specifications of
various software that may be used by them for the laboratories in their
curriculum starting from I B.Tech to IV. B.Tech. The software may be
proprietary software or Free and Open source software. It can vary from
department to department. Students can refer to their syllabus books,
consult staff members of the concerned department or refer websites. The
following is a sample list. Instructors may make modifications to the list to
suit the department concerned.
Desktop operating system
Server operating system
Antivirus software
MATLAB
CAD/CAM software
AUTOCAD

References:
1. Introduction to Computers, Peter Norton, Mc Graw Hill
2. MOS study guide for word, Excel, Powerpoint & Outlook Exams, Joan
Lambert, Joyce Cox, PHI.
3. Introduction to Information Technology, ITL Education Solutions
limited, Pearson Education.
4. Networking your computers and devices, Rusen, PHI
5. Trouble shooting, Maintaining & Repairing PCs, Bigelows, TMH

24