0% found this document useful (0 votes)
94 views5 pages

Design of Circular Beam

The document provides specifications for a reinforced concrete beam, including a total beam depth of 600mm, width of 1000mm, clear cover of 75mm, and reinforcing bar diameters of 16mm spaced 200mm apart in three regions of the beam. It also lists inputs for yield strength, concrete strength, and will analyze the beam for bending and shear capacity.

Uploaded by

fitzgerald cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
94 views5 pages

Design of Circular Beam

The document provides specifications for a reinforced concrete beam, including a total beam depth of 600mm, width of 1000mm, clear cover of 75mm, and reinforcing bar diameters of 16mm spaced 200mm apart in three regions of the beam. It also lists inputs for yield strength, concrete strength, and will analyze the beam for bending and shear capacity.

Uploaded by

fitzgerald cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

1.

0 Data Inputs
Total Beam Depth, h = 600 [mm]
Beam Width, b = 1000 [mm]
Clear Cover, cc = 75 [mm]
Reinforcing Yield Strength, fy = 414 [Mpa]
Concrete Compressive Strength, f'c = 28 [Mpa]

Region A
Bar Diameter = 16 [mm]
Spacing = 200 [mm]
Region B
Bar Diameter = 16 [mm]
Spacing = 200 [mm]
Region C
Bar Diameter = 16 [mm]
Spacing = 200 [mm]

2.0 Base Slab Reinforcements

2.1 Bending Capacity

Top Reinf. Bottom Reinf.


Mx My Mx My
Governing L/C #
Ultimate Moment
Design Moment
Effective Depth

Ru
1
reqd
min (a)
min (b)
min (actual)
max
governs
S reqd
S provided
Adequacy

2.2 Shear Capacity

Top Reinf. Bottom Reinf.


Along X Along Y Along X Along Y
Governing L/C #
Shear Stress

for shear
Vu
Vc
Adequacy
D

"REGION A"

"REGION B"

"REGION C"

S
D

"REGION A"

"REGION B"

"REGION C"

RADIAL REINFORCEMENT

You might also like