Imo Dv313d en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 83

DV 313 E

Slewing Ring
Product Catalog

www.imo.de
Depending on the application and type, large dia-
meter IMO Slewing Rings can be up to 6 meters
in diameter and weigh more than 20 tons.
They are used for various appplications, including
construction machinery, agriculture & forestry,
tunneling & mining, ship buildung, conveyor &
transportation systems, and medical technology.
Additionally, IMO is a leading supplier of blade,
yaw, and main bearing for on- and offshore wind
turbines, and even provides blade bearings for tidal
stream systems.

Worm or pinion driven IMO Slew Drives consist


of a ball or roller slewing ring, a drive train, and a
completely enclosed and sealed housing.
These convenient, ready-to-insall systems can
replace complex systems with multiple parts to
reduce design and assembly time.
They are used around the world for steering in
equipment such as gantry cranes and heavy-duty
transporters, as well as for rotating, tilting, and
positioning in machinery, including construction
equipment and slew drilling rigs.
IMO Slew Drives are also used within the renewa-
ble energy industry in small wind turbines, solar
trackers, and solar thermal tower plants.
Preface and Imprint

IMO has developed, manufactured and sold large Product and application images presented in this cata- IMO Ball and Roller Slewing Rings
diameter slewing rings to customers for many log show potential fields of application for which IMO as well as IMO Slew Drives are quality
years worldwide. Slewing Rings might in principle be used after tech-
nical verification of our application engineering. They products made in Gremsdorf, Germany
This catalog presents our comprehensive standard are not intended to be understood as fundamental and distributed worldwide.
range of ball- and roller slewing rings up to dia- designs. All engineering design work is to be based on
meters of more than 6000 mm. If your application the technical data listed in this catalog. Please contact The IMO Group with headquarters
requires a customized product please contact our our Engineering Department for specific questions. located in the south of Germany has
Application Engineering Department. more than 25 years of experience in
This catalog carries a reference number and replaces Our products are being continuously refined. Products,
all previous editions. Data of earlier catalogs that product range and specifications contained in this
designing and manufacturing Slewing
do not correspond to the information of this issue publication are subject to change withoutnotice. Rings and Slew Drives.
therefore are no longer valid.
Published by: We are certified according to the
In the back of this catalog or at IMO GmbH & Co. KG standards DIN EN ISO 9001, 14001
www.imo.de you find an Imostrasse 1 and BS OHSAS 18001.
Application Data Sheet. 91350 Gremsdorf
Please do fill it in it is the performance Germany Several times, IMO has achieved awards
specification for the use of our products. for its product innovations at Exhibitions
Slewing Rings are high-tech products Tel: +49 9193 6395-0
Fax: +49 9193 6395-1140 for Ideas-Invention-New Products. In
optimized to the specific demands and
environmental conditions of your appli- our sector we are one of the leading
Copyright September 2013
cation. Thus it is important to fill in the by IMO GmbH & Co. KG, Gremsdorf suppliers.
form as exactly and as detailed as possible
before returning it to us.

You will then receive our recommendation for the is a registered trademark
ideal IMO product for your application and thus
benefit directly from our profound experience.

IMO terms and conditions shall apply to all All texts, images and graphics in this publication
quotations and purchase orders. are subject to the copyright and other laws for the
protection of intellectual property.
Furthermore our Installation & Operating Manual
needs to be followed strictly, it is important for the Some of the images in this publication are also
reliability and safety of our product and has consi- subject to the intellectual property rights of third
derable influence on its service-life. Additionally the parties. No part of this catalog may be reproduced
Installation & Operating Manual contains practical without prior written permission of IMO.
information on the layout of your adjacent structure. All rights reserved.
Any liability for technical design, especially the afo-
rementioned adjacent structures however, is hereby Please contact us for information:
excluded.
IMO GmbH & Co. KG
There are separate brochures about the Imostrasse 1
IMO group and IMO products for selected 91359 Gremsdorf
applications as well as a catalog of our Germany
comprehensive product portfolio of Slew Tel: +49 9193 6395-0
Drives. Fax: +49 9193 6395-1140
[email protected]
The latest versions of all mentioned www.imo.de
documents canbe downloaded at
www.imo.de. Please contact
us to receive a hard copy.

All information in this catalog has been carefully


reviewed and checked. For omissions and errors in this
publication however we cannot accept responsibility.
Nomenclature Table of Contents

Product-
p. 4 - 57
Information

Technical
p. 58 - 69
Information

Ball Slewing Rings


with flange rings p. 70 - 77
Series 920, 932

Single Row Ball


Slewing Rings
p. 78 - 91
Series
116, 120, 125, 150

Double Axial
Slewing Rings p. 92 - 97
Series 840, 850

Roller / Ball Combination


Slewing Rings p. 98 - 103
Series 532, 540

Triple Row Roller


Slewing Rings
p. 104 - 115
Series
320, 325, 332, 340, 350

Other Standard
p. 116 - 147
Ball Slewing Rings

3
Product Line Overview / Comparison

Design types Series Raceway diameters Maximum tangential Maximum Load carrying capacity 1) Weight 1) Clearance
tooth force.1) tilting moment 1) 2)
Static axial load rating Static radial load rating
DL fz max Mk max C0 ax C0 rad G
[mm] [kN] [kNm] [kN] [kN] [kg]

Radial clearance
Ball Slewing Rings
0 - 0.3 mm
with flange rings
Axial tilting clearance
Series 920 0 - 0.5 mm
Precision version
up to max. 0.06 mm
from 311 to 1091 from 23 to 51 from 16 to 151 from 208 to 370 from 89 to 312 from 19 to 87

Radial clearance
0 - 0.2 mm
Series 932
Axial tilting clearance
0 - 0.4 mm
from 955 to 1455 from 65 to 86 from 442 to 1036 from 2754 to 4196 from 1029 to 1568 from 131 to 250

Radial clearance
Ball Slewing Rings 0 - 0.2 mm
with flange rings Axial tilting clearance
Series 116 0 - 0.4 mm
Precision version
up to max. 0.03 mm
from 100 to 500 from 16 to 18.5 from 4 to 50 from 103 to 517 from 51 to 253 from 5 to 24

Radial clearance
0 - 0.2 mm
Axial tilting clearance
Series 120 0 - 0.4 mm
Precision version
up to max. 0.06 mm
from 311 to 1091 from 23 to 51 from 36 to 311 from 448 to 1572 from 192 to 673 from 21 to 91

Radial clearance
0 - 0.25 mm
Series 125
Axial tilting clearance
0 - 0.4 mm
from 455 to 1455 from 52 to 86 from 132 to 1154 from 1213 to 3879 from 453 to 1450 from 53 to 233

Radial clearance
0 - 0.4 mm
Series 150
Axial tilting clearance
0 - 0.75 mm
from 1800 to 2800 from 229 to 290 from 2861 to 7008 from 8423 to 13102 from 3148 to 4896 from 762 to 1205
1) The data refers to the minimum and maximum diameter per series 2) The tilting moment capacity for each unit should be confirmed by referring to the limiting load diagram for each individual model

4 5
Product Line Overview / Comparison

Design types Series Raceway diameters Maximum tangential Maximum Load carrying capacity 1) Weight 1) Clearance
tooth force.1) tilting moment 1) 2)
Static axial load rating Static radial load rating
DW fz max Mk max C0 ax C0 rad G
[mm] [kN] [kNm] [kN] [kN] [kg]

Double Axial Radial clearance


Slewing Rings 0 - 0.4 mm
Series 840
Axial clearance
0 - 0.4 mm
from 2199 to 3300 from 307 to 408 from 4383 to 9236 from 10387 to 15587 from 2078 to 3115 from 1238 to 1969

Radial clearance
0 - 0.5 mm
Series 850
Axial clearance
0 - 0.5 mm
from 2559 to 4140 from 403 to 495 from 6661 to 16170 from 14580 to 23588 from 2955 to 4750 from 1892 to 3282

Roller / Ball Combination Radial clearance


Slewing Rings 0 - 0.32 mm
Series 532
Axial clearance
0 - 0.32 mm
from 3550 to 4250 from 294 to 294 from 16633 to 23716 from 32008 to 38320 from 1083 to 1300 from 2028 to 2455

Radial clearance
0 - 0.4 mm
Series 540
Axial clearance
0 - 0.4 mm
from 4250 to 4900 from 450 to 450 from 27652 to 36769 from 44728 to 51569 from 1403 to 1620 from 3469 to 4000
1) The data refers to the minimum and maximum diameter per series 2) The tilting moment capacity for each unit should be confirmed by referring to the limiting load diagram for each individual model

6 7
Product Line Overview / Comparison

Design types Series Raceway diameters Maximum tangential Maximum Load carrying capacity 1) Weight 1) Clearance
tooth force.1) tilting moment 1) 2)
Static axial load rating Static radial load rating
DL fz max Mk max C0 ax C0 rad G
[mm] [kN] [kNm] [kN] [kN] [kg]

Triple Row Roller


Radial clearance
Slewing Rings
max. 0.25 mm
Series 320
Axial clearance
max. 0.08 mm
from 1250 to 2000 from 187 to 319 from 1735 to 4416 from 7383 to 11812 from 587 to 989 from 539 to 912

Radial clearance
max. 0.40 mm
Series 325
Axial clearance
max. 0.13 mm
from 1800 to 2800 from 306 to 449 from 4274 to 10542 from 13006 to 20232 from 1348 to 2194 from 1101 to 1785

Radial clearance
max. 0.50 mm
Series 332
Axial clearance
max. 0.17 mm
from 2240 to 4000 from 401 to 559 from 8108 to 25869 from 19352 to 34558 from 1862 to 3471 from 1975 to 3752

Radial clearance
max. 0.60 mm
Series 340
Axial clearance
max. 0.20 mm
from 2800 to 4500 from 525 to 740 from 13500 to 37340 from 27973 to 44956 from 2334 to 3905 from 3213 to 5410

Radial clearance
max. 0.60 mm
Series 350
Axial clearance
max. 0.20 mm
from 3150 to 4750 from 760 to 820 from 21074 to 48351 from 36813 to 55512 from 3894 to 6143 from 5128 to 7870

Other Standard
Radial clearance
Ball Slewing Rings
acc. to version
Axial clearance
acc. to version

from 120 to 1845 from 11 to 204 from 2 to 2130 from 78 to 6456 from 29 to 2413 from 4 to 479
1) The data refers to the minimum and maximum diameter per series 2) The tilting moment capacity for each unit should be confirmed by referring to the limiting load diagram for each individual model

8 9
Line
Slewing Rings
A comparison of the Slewing Rings:
On the left are the smallest
(internal diameter 40 mm / 1.57 in)
and the largest (outside
diameter 6000 mm / 236 in)
IMO Slewing Rings. Below is the

Product
Our service for you: smallest raceway roller which we
use (diameter 12 mm / 1/2 in)
and the largest ball
(diameter 80 mm / 3 in).
technical consulting
dimensioning and calculation
Large-diameter anti-friction Slewing Rings designed to handle
design and drawing simultaneously occuring axial, radial and moment loads.
Service

Integration of your FE-calculations Replaces traditional systems using fixed and


FE- calculations including complex adjacent floating bearings as well as king pins
structures Ball and Roller Type Slewing Ring configurations
Available in diameters more than 6000 mm
product trainings (4 to 236 in)
Integrated mounting holes
integration support Available with integral internal or external gearing of
disassembly and inspection bearing rings (modules 1 to 30 mm / 0.04 to 1.18 in)
Sealed raceway system with grease lubrication
assessment and optimization advice Standard series and special designs
repair and reconditioning of used Slewing Rings Certified to meet DIN EN 10204 requirements for
materials, dimensions and operating specifications
lubricant analysis and seal inspection
wear measurement
check of bolts
organization of certificates from
rolled rings
calculations
final Slewing Rings
through for example DNV, Bureau Veritas,
Lloyds Register of Shipping
express service for urgently needed components
or prototypes
work on building sites : leading industrial
climbers level 3 with FISAT-certificate
inspection of personal protective equipment

Diameters more than 6000 mm


we supply XXL Slewing Rings!

10 11
Designs
Rings
SlewingStandard
Ball Slewing Rings with flange rings
Single row design with four-point raceway geometry
Untoothed rings with flange thicknesses of 12 and 21 mm
Ball diameters 20 and 32 mm
Available ex stock or with a short delivery time as
standard series in 14 sizes
Raceway diameters of 311 to 1,091 mm or 955 to 1,455 mm
Ball Slewing Rings
For applications with light loads
Single row (picture above) and double row (picture below) designs
Enables lightweight structures in spite of large bearing diameters
Ball diameters 12 to 80 mm
Applications: Handling technology, manlift platforms, turntables
Four-point raceway geometry
Optional preloaded raceway system and centerings
Enables robust designs for arduous application conditions
High resistance to false brinelling in heavy vibration conditions
Reduced sensitivity to shape deformations in the mounting
Roller / Ball Combination Slewing Rings structure

Roller raceway to take up the axial loads Higher static load capacity than similar designed Cross
Roller Slewing Rings
Ball raceway provides support for radial loads.
All parts are retained together as a unit during fitting Catalog series with outside diameters from 180
to 2,971 mm
Ball diameters 25 to 80 mm, roller diameters up to 100 mm
Often designed as special versions according to customer
Used in application with a dominant axial force and low radial requirements (outside diameters more than 6,000 mm)
load / tilting moments
Frequently used in wind energy turbines, cranes,
Standard series with outside diameters more than 6,000 mm construction machinery, mechanical engineering and
Frequently produced as special designs according to customer special purpose machinery
requirements
Typical applications: Bulk materials handling, stacker reclaimers,
bucket wheel excavators, machine tools

12 13
Double Axial Slewing Rings Roller Slewing Rings
Double row design with large supporting balls and smaller retaining balls Triple Row Roller Slewing Ring
Ball diameters 20 to 80 mm Roller diameters 10 to 100 mm
Both raceways in two point geometry Plastic, steel or brass cage segments according to loads
Standard series with outside diameters more than 6,000 mm (can also be supplied with closed cage)
Used in cranes and as replacement parts for existing equipment Designed to provide the combination of the highest capacity in the smallest configuration
Special designs can be supplied Greater static and dynamic load capacity, higher rigidity and constant friction torque
compared with all other Slewing Ring designs (with the same raceway diameter)
High requirements on the rigidity and precision of the mounting structure
Standard series with outside diameters from 1,462 to 5,179 mm
Mostly supplied as customer specific designs
Designs
Rings
SlewingStandard

Cross Roller Slewing Rings


Single row roller raceway under 45 degrees
Roller diameters 12 to 60 mm
Alternately arranged rolling elements
Constant friction torque with different loads
Higher dynamic service life than similar Ball Slewing Ring designs
Higher demands on the rigidity and precision of the mounting structure
in comparison with Ball Slewing Rings
Applications: Robots, antennas, medical technology, positioning devices,
machine tools
Can be supplied to special customer requirements

14 15
ZnFeCo coating, dark-coloured, ZnFe coating Priming and multi-coat painting Zinc-coated surface (flame-sprayed)
Design Features

according to MIL specification


Slewing Rings

Surface coating
Depending on the requirements of the application, the surfaces of our
Slewing Rings can be provided with metallic and non-metallic coatings,
which ensure effective corrosion protection.

Metal zinc spraying (flame spraying) on


sand-blasted surface

External toothed Slewing Ring, quenched and tempered


rings, raceway 3,000 mm, module 20 mm Teeth in only one segment

Gearing
We supply Slewing Rings with internal, external, straight and helical gears (in various heat
treated conditions), as well as untoothed Slewing Rings. The point of maximum runout of the
gearing at which the circumferential backlash of the pinion should be adjusted, is marked in
green.

External helical gear, normalized External straight gear, quenched and tempered We supply modules from 1 to 30 mm Quenched and tempered ring, induction Hardened tooth flanks and roots Hardened tooth flanks and
(pictured: 3 mm and 20 mm modules) hardened wear resistant tooth flanks roots in only one segment

16 17
Special materials

Special Slewing Rings with


ceramic balls (dry running),
stainless steel rings, square-
Design Features

sectioned raceway (low friction


torque) and labyrinth seal.
Slewing Rings

Ceramic and steel balls

Series 920 Slewing Rings, but


with stainless steel rings and
rollers

3-row roller bearing used as main bearing of a 5 MW wind turbine. Weight of the bearing: 17 t.

Seals Rolling element separation

Steel cage segments for a


crane Slewing Ring

Brass cage for Ball Slewing Ring with


NBR70 seal fixed with longer service life and higher rotational
stainless steel wire speed requirements

Steel plate as primary seal


Plastic cage for high Plastic spacers for low circumferential speeds Rolling element guided brass roller
circumferential speeds cage made for horizontal axis rotation

18 19
We show what is possible!

Imagine you require a special Slewing Ring


that does not show any linear expansion
with temperature increase and no shrinkage
Special Designs

as it cools. Do you think this is impossible?


Are you sure?
Slewing Rings

Customer specific wire race bearing with


rings manufacured from a high nickel rich
material with a thermal expansion coefficient
of practically zero. Such a bearing was
developed and manufactured by IMO!

IMO: Engineering at its best!


Split Slewing Rings are ideal for situations where a
bearing has to be fitted around an existing structure,
or where complete dismantling of a machine would be
uneconomic. Typical applications are stone compactors,
tool magazines and yaw bearings of clarification plants.

Eccentric bearing unit from a machine tool used for diesel engine crankshaft machining. The bearing unit
contains two high precision Cross Roller raceways and one slide bearing. The integrated toothing makes it
possible to adjust the eccentricity allowing machining of all crankshaft bearing surfaces in just one operation.
The unit has an external diameter of around 1,200 mm (47 in). Completely manufactured by IMO!

Other special designs


Slewing Rings matched to customer requirements, e.g. custom mounting hole patterns or prototype designs
Geometry of the Slewing Ring adapted to the installation conditions
Suitable for extreme temperatures and vacuums
Special cages for high circumferential speeds
Special sealing systems for specific applications
Special lubrication according to customer requirements
Rings made of special materials
Integrated Condition Monitoring Systems

20 21
We also supply complete solutions!

Our pinion and worm driven Slew Drives are ready to install
system modules consisting of:
A Ball or Roller Slewing Ring
Hydraulic or electric motors
(direct drive or with gearbox)

Accessories
A totally enclosed housing
Attachments on request

Product Line
(brakes, position feedback sensors)

Bolt on the Slew Drive, connect the motor


We manufacture gear rims up to outside and start slewing - as simple as that!
diameters of more than 6,000 mm and 30 mm
modules.

Drives
Line
IMOs innovative Slew Drives offer plenty
No adjusting of components

Product Slew
Complete system instead of many single parts
Compact design
High output torques thanks to the high gear ratio
... and are used in many applications such as steering gear in special vehicles, hinges
in manlift platforms, in cranes and in attachments for stackers and excavators.
Double Row Angular Contact Cylindrical We supply customer specific pinions
Roller Slewing Ring for the chain wheel of from 12 mm module.
a tracklaying vehicle. These separable rings
are not self-supporting but integrated into
We are ready to design customized solutions for you.
the housing as individual parts by
the customer. You can find our comprehensive standard programm in our product
catalog Slew Drives. This catalog can be downloaded - as any
other of our brochures - in the download section on www.imo.de.
On request we can supply a hard copy as well.

Finish turned and bored mounting


flanges and supporting rings
complete our production lines.

180 deg gear ring segments,


5 deg right-hand helical gearing

22 23
IMO Slewing Rings - approved
for use in arctic conditions
(operation down to -30C,

Wind Turbines
proof of structural integrity

Applications
under load at -40C)

Single Row Ball Slewing Ring, with internal


teeth, zinc coated surface (flame-sprayed)
and painted. Used on top of the turbine
tower as a Yaw Bearing to allow the nacelle
and rotor to orientate into wind.

Three-row roller bearing with closed brass cages used as


main bearing for a shaftless direct driven 5 MW wind turbine.

Offshore - the future!


Onshore-windfarm:
3 MW turbines with Double Row untoothed Ball Slewing Ring,
rotor diameters of 90 m. with cage and special seals, zinc- coated
surfaces (flame-sprayed) and painted. Such
Slewing Rings are used to adjust the rotor
blades (three per wind turbine).

Measuring the gearing of a


blade bearing used in a 7 MW
Offshore turbine with a ball
diameter of 80 mm, an outer
diameter of around 5 m and a
total weight of 8000 kg.

A wind energy turbine with rotor diameter of 104 m


and power of 3.4 MW. This turbine can provide
electric power for around 2500 homes. IMO develops
Slewing Rings for such wind energy turbines with the
latest equipment according to recognized procedures.
The calculation is carried out according to the relevant
regulations from Germanischer Lloyd, the DNV and
other well-known certifying authorities.

24 25
Wind Turbines
Innovation
Blade bearings of wind turbines are being chal-
lenged by bigger rotors including the trend to
continuous pitching. IMO has developed the new
blade bearing T-Solid especially for offshore and
low site wind turbines.
100%

The value potential:


extended service life
Wind load
no raceway edge loading
100% extreme failsafe running ability
increased pitch activity possible
less deformation under load
less leakage Characteristics:
less wear
three-ring-design, inner or
Wind load smooth running outer ring split
no drive torque peaks
The aerodynamic forces act upon the center of double row axial raceways,
pressure on the blade and result in high moment less torque under load 90 deg ball contact angle
loads on the pitch bearing. These loads create allows smaller pitch drives
deformations on the blade root, the pitch bea- higher pitch dynamics possible single row radial raceway,
ring and the hub. increased efficiency 0 deg roller contact angle
less pitch failures
ball separation by spacers
no filling plug required

Loads transmitted in a different way

Conventional 100% 100% 100%

all loads resolve into axial and


radial components
radial component causes bearing
?
gap widening Change of
Risk of edge
loading without
ball contact angle moves contact angle reinforcement
towards raceway edge under load

Wind-
load 45 deg
Wind-
load ? deg
Wind-
load

100% 100% 100%

axial load components


carried by axial raceways
radial loads carried by radial

raceways No change of No risk of edge
contact angle
insignificant bearing gap under load
loading without
reinforcement
widening
constant ball contact angle Wind-
load
90 deg Wind-
load
90 deg Wind-
load

unfolds new perspectives for reduced cost of ownership,


ensuring your return on investment!
Find more information at www.t-solid.com

26 27
Solar & Tidal Stream Systems
Applications

Applications
Small Wind Turbines

This bearing, available with internal, external or


no gear, is used as pitch bearing for a 50 kW
small wind turbine. Maximum moment load of
this bearing is 144 kNm.

A 3-row roller bearing with special seal and an outer


diameter of about 1.5 m supports and turns the
rotors of a - up to now unique - tidal stream system.
As this way of energy exploitation is continually
working - independently from weather conditions -
the system and consequently the bearing is under
load 24/7.

This Slew Drive SP-HE 1400 with AC drive


and brakes is in use as yaw bearing at a
100 kW small wind turbine. Maximum
torque is 86 kN, maximum moment load
1,600 kNm.

One or mutiple drives can be used.

Designed for high


accuracy positioning:
WD-LB (above) and
WD-LC.

28 29
Construction Machinery & Excavators

This floating dredger uses a 3-row


roller bearing with a diameter of
5,200 mm and a weight of 20 t.
The dredger bucket can contain
Applications

about 30 t of sand.

Applications
Bucket wheel excavators and
stacker reclaimers use large dia-
meter (over 5,000 mm 196 in)
Ball / Roller Combination Slewing
Rings as main bearings.

Mining
Cross section of a typical main
Slewing Ring. This unit is a
combination type with external
Tandem asphalt compaction toothing and a diameter of
4,800 mm (189 in).
rollers use untoothed Slewing
Rings as a steering bearing
(some designs are partly coated
on the surface to prevent corro-
sion). In the split roller, Slewing
Rings with special seals are used.

The vibratory roller of the


refuse compactor in the
picture uses untoothed
Slewing Rings in the
knuckle joint.

Slew Drive SP-HC 0698 with


hydrostatic gear for turning
an excavator boom, part of a
cutter bar.

30 31
Boom attached
to gear ring Synchronous rotating
turntable with IMO

Anwendungen
Slew Drive

Cranes & Manlift Platforms


Specifications:
Outside diameter 5,000 mm
Support roller diameter 50 mm
Maximum permissible tilting moment 65,000 kNm
Module 24 mm
Weight 8,500 kg
Shipboard cranes

Triple Row Roller Slewing Ring with an outside diameterof about


5,000 mm and root and flank hardened internal toothing.
This Slewing Ring for an Indonesian harbour pontoon crane was
manufactured and shipped by IMO in only 8 weeks.

Mounted to
truck chassis.

Harbour pontoon crane

Railway slewing cranes

Harbour cranes, mobile harbour cranes


Manlift platform

32 33
Slewing Rings for offshore applications have to meet special approval
requirements regarding material characteristics and safety under catastrophic load
FSPO - Crude Oil Production Systems

cases. The arduous environmental conditions require high perfomance sealing


systems. Inspection and approval by the certifying authorities is often required.
Applications

Applications
External toothed Ball Slewing Rings with a
diameter of 3,000 mm (118 in) are used in
this oil spill barrier reel on an FSPO (Floating
Production Storage Offloading) unit.

Offshore
Depending on the required load
carrying capacity, Single Row Ball
or Triple Row Roller Slewing Rings
(often with internal toothing) are
used in offshore cranes.

34 35
Slewing Rings find a multitude of applications on ships.
Below is an examples of an offshore supply vessel.
We are able to fulfill the specifications
of all major certification companies.

Applications
Ship Equipment
Untoothed Slewing Ring for Internal toothed Slewing Ring Gear ring (external diameter
a fire-fighting gun. for a provision crane. of about 1,700 mm 67 in)
with hardened toothing for
a crane winch.

Special Slewing Rings (wire race bearing) with stainless steel rings for a slip ring
assembly on an FPSO. A highly accurate and very narrow bearing gap ensures
the necessary EExd - explosion pressure protection. In case of an explosion on the
upper side of the wire race bearing there must be no possibility of ignition sparks
penetrating through the bearing and
causing a secondary detonation on
the lower side.

Ball Slewing Ring with root and flank hardened external toothing for a ship`s thruster
on a vessel. The stamp by Lloyds Register of Shipping can be clearly seen.

Slewing Ring for the launching


gear of a sea rescue boat.

Three Row Roller Slewing Ring with internal


toothing and an external diameter of about
3,000 mm (118 in), for a large shipboard crane.
36 37
Shipboard cranes on container
vessels use internal toothed Triple
Row Roller Slewing Rings. The
examples in this photograph are
fitted with Slewing Rings that are
2,650 mm (104 in) in diameter

Applications
and carry tilting moments up to
15,000 kNm (11,063,983 ft-lb).

Ship Cranes
Deep sea fishing vessels use Ball
Slewing Rings for shipboard cranes
and net handling equipment. Typical
external diameters range between
600 to 1,500 mm (23,6 to 59 in).

Large shipboard crane with a Triple


Row external toothed Roller Slewing
Ring. The high load capacity and Internal toothed Triple Row Roller
compact proportions of this type of Slewing Rings are used on this ship-
Slewing Ring are ideally matched to board crane. The photograph shows
the mast and base block proportions a partially dismantled Slewing Ring
of the crane. with one of the rings removed to
reveal a row of rollers.

38 39
External toothed Ball Slewing Rings with
a diameter of about 3,000 mm (118 in)
are used to turn the special crane trolley
when melting aluminium.
Applications
Industry Cranes

Slewing Rings find diverse applications in steel works


and foundries such as loading cranes, traversing-revolving
cranes, wall slewing cranes, cover swing gears and ladle turrets.
In the construction industry, Slewing Rings are used in gantry
ceiling-boom cranes.

Gantry crane with rotable loading device in a concrete factory.

40 41
Bulk Handling & Materials Handling
Applications

This stacker on board of a ship is swivelled


by means of an internal toothed, Triple Row
Roller Slewing Ring.
Specification:
Outside diameter 3,250 mm
Maximum tilting moment 13,000 kNm Bulk materials handling in the harbour is carried out by
stackers and reclaimers, which are equipped with external
toothed Roller / Ball Combination Slewing Rings with
raceways in a diameter range of 4 to 5 m.

Specification:
Stacker reclaimer with 80 m boom
Outside diameter 4,300 mm
Roller diameter 40 mm,
ball diameter 32 mm
Maximum axial force 4,000 kN
Maximum swivelling moment
6,000 kNm
42 43
Foundries & Steelworks
Applications
Tunnel Boring Machine (TBM)
Applications

The erector uses a Cross Roller Slewing We manufacture Triple Row Roller Slewing Rings for cover swing
Ring for lifting and positioning the concrete gears of electric arc furnaces (so-called EAFs, picture above) as well
lining segments (Tubbing) which are used for as Triple Row Roller Slewing Rings for ladle turrets (picture below).
strengthening the tunnel walls.

Specification:
Raceway diameter 4,500 mm
Outside diameter 4,700 mm
Roller diameter 40 mm
Double lip seals with primary
labyrinth

Tunnel boring machines use large and heavy Triple Row Triple Row Roller Slewing Ring for a micro
Roller Slewing Rings in cutting heads. tunnel boring machine.
44 45
Public Transportation Systems
Applications

We manufacture machined annular spacers to connect the diesel


engine and the gear on coaches and buses.

IMO has already


supplied more than
Berliner Verkehrsbetriebe a thousand Slewing Rings
for articulated buses. These
Slewing Rings form the pivot
between the front and rear
Trams and subways use special design Ball sections of the vehicles.
Slewing Rings as hinge bearings between
carriage sections and carriages and bogies.

Berliner Verkehrsbetriebe
Berliner Verkehrsbetriebe

Untoothed Ball Slewing Rings with a diameter


of 400 mm (16 in) form the hinge of the
air cargo luggage ramp as shown in the
picture taken at Frankfurt airport.

Difficult geometric conditions in the mounting structures of rail


vehicles present real challenges for the design of Slewing Rings.
High performance seals and long service lives are important
requirements.

46 47
Slew Drives series WD-L and SP-I are These flail mowers rely on
Agriculture & Forestry

used by these wood-choppers to posi- Slew Drives series WD-L


Applications

tion the chipper and the expulsion tool to position the mower.
as well as to maneuver the grappler.

Slewing the grappler of this This work boat which is used Harvesters use our Ball Slewing Rings and An untoothed Ball Slewing Ring with a
forwarder is done by means in Dutch canals is fitted with a Slew Drives for the axle swing arm, the raceway diameter of about 700 mm (27 in),
of a Slew Drive series SP-I. WD-L series Slew Drive to move crane boom, the harvester head (with a forms the hinge which connects this trailer
the boom of the excavator. chain saw) and a rotatable cab. and tractor.

48 49
Special Purpose Machinery
Applications
Precision Single Row Ball Slewing Rings with cages are used for the rotating
carousels in fast running blow moulders for the production of polyethylene
PET bottles. Such Slewing Rings run continuously and reliable service life is an
essential design criterion.

We supply leading manufacturers of blow moulders IMO has a leading position in supplying Slewing Rings to the bottling industry.
for the production of PET-plastic bottles. Because of Our products ranging from 200 up to 6,000 mm (236 in) external toothed
the high circumferential speed, the Slewing Rings are Slewing Rings, are used in machines for cleaning, filling, equipping and labelling.
equipped with closed cages.

50 51
Special Mechanical Engineering
Medical Technology

Variable winding and unwinding systems in

Applications
printing machines require high precision.
Applications

Smooth running Cross Roller Slewing Rings


fulfill all required criterion and are perfectly
adaptable for this application. In this picture
you can see a Cross Roller Slewing Ring,
partly assembled with a raceway diameter
of approximately 1,300 mm (51 in).

In Cross Roller Slewing Rings


the rollers are arranged crosswise and
run in a square sectioned raceway.

Linear accelerators are used in oncology for radiation therapies.


The Ball Slewing Rings with horizontal rotational axes have to be
highly precise with a minimum of running noise and friction torque.

TRUMPF Medizin Systeme

This OR table column is positioned by means of a special bearing. The


deployed Slewing Ring is a customized version with specific countours
and made of stainless steel.
52 53
When it comes to safety,

Amusement Park Rides


there are no compromises!

Applications
A ride in Zero g guarantees thrills
and also zero gravity for a short time.
The gondolas are rotated with our
Slew Drive WD-HE 0373.

Night Fly how would you feel if


you could not rely on the engineering
of an amusement park ride and its
components.

Ultra Max everything revolves


around IMO!

Tango is one of the most breathtaking amuse-


ment park rides in its class. Each gondola is driven
in its three rotational axes via five Slewing Rings
which have adv internally hardened toothing.

54 55
Cleaning Systems for Buildings
Precision Applications

Cross Roller Slewing Rings are ideal

Applications
Applications

where high precision, rigidity and


smooth running are required. The
picture below shows one partially
assembled.

Petronas Towers, Kuala Lumpur, Malaysia.


For many years, until 2004, the Petronas
Towers at 452 m (1,483 ft), were the highest
skyscrapers worldwide.
A window cleaning system is integrated in
the roof just below the top of the towers.
The equipment contains OEM components
Slew Drives of WD-series fitted from different important suppliers. And the
with electric motors used for Slewing Rings? Made by IMO of course!
the yaw and pitch controls of
this solar table.

56 57
Technical Information

Symbols and units

Construction and function of a Slewing Ring


Cax kN Basic axial dynamic load rating H mm Overall height of Slewing Ring
Slewing Rings consist of an internal and external ring (1) and (2) In Slewing Rings, the rolling elements (6) carry the loads between
with an integrated raceway system and optional internal or external the inner and outer ring. The load capacity of the raceway system
CaxT kN Basic axial dynamic load rating, i Gear ratio
toothing (3). A functional seal (4) protects the raceway system on is determined predominantly by the raceway design, the hardening
supporting raceway
the upper and lower sides. Slewing Rings are designed for grease depth, and the number and size of the rolling elements. Spacers (7)
m mm Module
lubrication which is carried out via grease nipples (5). separate the rolling elements and minimise friction and wear. The
CaxH kN Basic axial dynamic load rating, rolling elements are inserted during manufacture through the filling
retaining raceway Mk kNm Tilting moment, including all occurring impact
plug hole (8), retained by the filling plug which is then secured by a
loads and required safety factors, calculated from
pin (9). The force is transmitted to the mounting structure by bolts.
Crad kN Basic radial dynamic load rating all axial and radial forces that cause the tilting
Through holes or threaded holes (10) can be provided in the inner
effect
and outer rings for these bolts.
C0ax kN Basic axial static load rating
MkD kNm Equivalent tilting for determining the
C0axT kN Basic axial static load rating, load point in the limiting load diagram
supporting raceway
MW Nm Friction torque of the Slewing Ring under
C0axH kN Basic axial static load rating, operating load in the installed state
retaining raceway
MWA Nm Friction torque of the Slewing Ring, unloaded
C0rad kN Basic radial static load rating
MD kNm transferable torque ot toothing
DL mm Raceway diameter of rolling elements
(see Product Overview) n rpm Rotational speed of Slewing Ring

DW mm Diameter of rolling elements nb Number of mounting holes per bearing ring

fa Application service factor nmax rpm Maximum rotational speed of Slewing Ring

Fax kN Axial load including all occurring shock loads and nzul rpm Permissible rotational speed of Slewing Ring
required safety factors, calculated from all axial
forces S0 Required static raceway safety

FaxD kN Equivalent axial load for determining the S0rad Existing static safety of radial raceway Figure 1
load point in the limiting load diagram
SF Safety factor against tooth base fracture
Frad kN Radial load including all occurring shock loads
x1 Pinion addendum modification coefficient
and required safety factors, calculated from all
radial forces
x2 Slewing Ring addendum modification coefficient
Load distribution
FradD kN Equivalent radial load for determining the Depending on external load, the load distribution and the contact
z1 Number of pinion teeth
load point in the limiting load diagram angle around the rolling elements will vary.
z2 Number of Slewing Ring teeth (wheel) In the case of axial load, all rolling elements are loaded in the
FradZ kN Radial load from gearing circumferential force
same direction
aA Bolt tightening factor In the case of radial load, a segment of the rolling elements
Frad max kN Limit value for checking frictional contact
carries the load
df mm Circumferential backlash of gearing
Fsp kN Initial preload on bolt In the case of tilting moment load, a segment on one side and a
segment on the opposite side of the raceway carry the load
dk mm Tilting clearance increase
Fz kN Available gearing circumferential force Mostly, a combination of axial, radial and tilting moment loads
occur (Fig. 2).
dk zul mm Maximum permissible tilting clearance increase
fz norm kN Permissible gearing circumferential force for tooth
base fatigue strength
dp mm Maximum permissible flatness deviation
fz max kN Maximum permissible gearing circumferential dV mm Maximum permissible deformation of mounting
force against overload fracture structure

G kg Mass (weight) dW mm Maximum permissible perpendicularity deviation Figure 2

58 59
Technical Information

Axial loads can be either compressive or suspended. Selection criteria Duty To address the peculiarities of different applications, the fol-
lowing application service factors are to be considered with
Suspended axial loads and the load on a rising segment For continuous running or high duty applications it is essential to
The following criteria must be considered for the correct selection respect to the operating conditions: (Note, these factors may
in tilting moments must be adequately resisted by mounting check the service life of the Slewing Ring and, if necessary, the
of a Slewing Ring. be superseded by customer specification, FEM classifications,
bolts (Fig. 3). Note: Catalog bolt data is not valid in this gearing. Please contact our Engineering Department for assistance.
calculation or design regulations by certifying authorities.)
case!
Direction of rotational axis
Vertical: Slewing Rings of all series can be used. Application Application service factor fa Bemerkung
Static load capacity of raceway
Construction machinery 1.25 Normal Operation
Horizontal
and Static load capacity of the Slewing Ring is determined by: Forestry machinery 1.50 Rough Operation
alternating: A horizontal rotational axis is generally possible for Foundries 1.75 Rough Operation
ball Slewing Rings with limitited rotational speed, but Hardening depth of the raceway Manlift platforms 1.30 Normal Operation
has to be verified by IMO application engineering. Number and size of the rolling elements
Slewing Ring design Mech. engineering, general 1.25 Normal Operation

Loads Raceway geometry Mech. engineering, general 1.50 Heavy Operation


Figure 3 External forces such as axial loads, radial loads and tilting mo- Measuring technique 2.00 Genauigkeit
ment must lie below the static limiting load curve, as regards their The limiting load diagram shows the permissible axial and tilting
Suspended loads moment loads for the respective size unit. Each loading case
Robots / mech. handling sys. 1.50 Genauigkeit
operating load point. For this, please refer to the chapters Static
including the required or recommended safety must lie below the Rail vehicles 1.50 Rough Operation
capacity of raceway and Mounting bolts.
Radial loads must be transmitted by means of frictional contact limiting load line for the selected Slewing Ring. Special vehicles 1.50 Rough Operation
between Slewing Ring and the attached mounting structure. Shocks, vibrations Deep mining 1.75 Rough Operation
A good bolt connection is vital for satisfactory function of the To account for the peculiarities of the different applications the Shipboard cranes 1.10 Normal Operation
shock factors for gears and the raceway system should be Limiting load diagrams are valid under the following
Slewing Ring. Cranes 1.25 Average Operation
considered. condition:
The bolt connection and tilting clearance of the Slewing Ring Cranes 1.45 Heavy Operation
Torque / tooth forces Static loading
must be checked regularly. Stackers & attachments 1.10 Light shocks
The required torque must not exceed the maximum permissible Limiting load line with safety 1
All catalog bolt data is valid only for compressive loads as torques and tooth forces given in the Technical Information section. Bolt clamping length between 5 and 10 times the bolt diameter Wind power turbines 2.00 Risk of false brinelling
shown in Figure 4 Explanations of the different torque specifications can be found in Continuous threads up to bolt head are not permissible Machine tools 1.50 Precision required
the gear section. Strength of bolts according to grade 10.9
Table 1: Application service factors
All mounting holes used
Rotational speed Compressive axial load (load applied according to fig. 5)
The following is a list of the maximum permissible rotational speeds In the case of applications with higher duty factors or continuous
Adequately stiff and level mounting structure running it is recommended that a calculation of service life is
nperm for the different series:
(see Installation & Operating Manual) carried out. Please contact our Engineering Department for
Minimum strength of mounting structure 500 N/mm2 assistance.
Figure 4 Series 116 Slewing Rings: nperm = Radial loading considered as specified
Compliance with Installation & Operating Manual The application service factors and the required static safety S0
Series 120, 125, 150, 920, for the existing loads are to be taken account of in the following
Compressive loads 932, 840 and 850 Slewing Rings: nperm = equations:
Gear
Our standard Slewing Rings are designed with spur gears. Series Equivalent axial load for limited load diagram:
Permissible torques are specified in the Slewing Ring tables. 320, 325, 332, 340, 350, 532 nperm =
and 540 Slewing Rings: FaxD = Fax fa S0
Sealing
Polymer seals protect the Slewing Rings from normal dirt penetra- To account for the prevailing radial load the tilting moment is
tion, dust and light sprayed water. For very dirty and wet environ- Lower permissible values apply for Slewing Rings in precision Frad
designs or those with reduced clearance. Please contact our increased correspondingly, at the same time the radial components
ments, the seals shall be protected by pre-mounted labyrinth or ad-
ditional seals on the mounting structure. Performance and service Engineering Department for assistance. from the gearing are also to be taken into account.
Figure 5
life of the Slewing Ring depends strongly on preventing ingress of
contaminents into the Slewing Ring. Radial load of toothing:
Pressure washing must not be used to clean Slewing Rings. Fz
FradZ =
cos 20
Operating temperature
Standard IMO Slewing Rings can be used in ambient temperatures Equivalent radial load:
from -25 up to +70C. Please contact us in the case of higher or FradD = (Frad + Fradz) fa S0
lower operating temperatures.
Equivalent tilting moment for limited load diagram:
DL
MkD = Mk fa S0 + 1.73 FradD
1000
(Series 116, 120, 125, 150, 920, 932)

This calculation is only valid if:


Mk
(Frad + FradZ) <
200 + 0.05 Fax
DL
60 61
Technical Information

Should the value be exceeded, the limiting load diagram no If the operating load point lies below the limiting load line then the Adequate measures to increase the radial load: Slewing Rings in the Series 320, 325, 332, 340 and 350
longer applies. Slewing Ring is statically adequately dimensioned. If loads frequently with minimum raceway clearance greater than zero
centering
Please contact our Engineering Department for assistance. occur during the slewing process, the selected type should be re-
evaluated dynamically for service life. Please contact our Engineering
fitting depth DL2
For Triple Row Slewing Rings (Series 320 to 350) the radial load bonding MwA = 0.8
Department for assistance. 2000
is calculated with respect to the static radial load rating and does more possibilities are to be inquired at IMO Application Engineering
not have to be taken into account in MkD. Slewing Rings in the Series 532 and 540 with minimum raceway
Mounting bolts For Slewing Rings with a different number or size of the bolts in the clearance greater than zero
inner and outer ring, the permissible radial load is to be determined D2
MkD = Mk fa S0 (Series 320 bis 350)
Prevailing loads must be safely transmitted. To ensure this, mounting MwA = 0.4 L
for both rings. The smaller value is the limiting value.
bolts should be sized to handle the raceway loading. The bolt curve
2000
C0rad Friction contact prevails if Frad max is greater than the prevailing
S0rad = (Series 320 bis 350) is depicted in the static limiting load diagram subject to the following Slewing Rings in the Series 840 and 850 with minimum raceway
Frad fa S0 conditions: radial load.
clearance greater than zero
Quote the fulfillment of the conditions in the case of considering Securing the mounting bolts DL2
Calculation example: MwA = 0.3
the static load capacity of the raceway. 2000
The limiting load diagram is applicable for compressive loads An adequately pre-loaded bolted connection does not need a
Application: Slewing equipment for a construction machine
(see Fig. 4). safeguard. (compare VDI-guidelines 2230 edition 2003)
under normal operation, no additional safety The friction torque for a Slewing Ring under load can be determined
In the case of suspended loads, the bolts are subject to additi-
factor S0 (S0 = 1) is required. with the following equation, approximately:
onal tensional forces. Please contact our Engineering Department
Load: Axial load 160 kN for assistance.
Friction torque
Radial load 6 kN The bolts of strength grade 10.9 are tightened according to Mw = 0.005 (4400 Mk + 4 DL Frad + DL Fax) + MwA
The friction torque of Slewing Rings depends upon many influence
Tilting moment load 120 kNm specification with a torque wrench (aA = 1.6). You can find the
factors, such as:
tightening torques in our Installation & Operating Manual. If there Gear
are other conditions please talk to our Engineering Department. Rigidity and flatness of the mounting structure
Slewing Ring: pre-selected series 120 Bolts above M30 should be tightened with an hydraulic tightening Gearing design
Load and loading combination
Type 10-20 0941 / 0-02062 device to 90% of the yield point. Details on this can be found in Slewing Rings can optionally be selected with spur gears confor-
Rotational speed and operating temperature
The following values are achieved with an application service our Installation & Operating Manual. Design of raceway system ming with DIN 3960, DIN 3962 and DIN 3967. The toothing is
factor of 1.25: For Slewing Rings with through holes, use the largest possible Number and frictional torque of seals either normalized or quenched and tempered according to the
metric bolts with regular threads. Lubrication grease and filling level Slewing Ring series. If higher torques or longer service lives are
Manufacturing tolerances required toothing is available in the quenched and tempered or
FaxD = 160 1.25 = 200 kN hardened condition.
Static load carrying capacity of the mounting bolts Other factors
FaxdD = 6 1.25 = 7.5 kN Permissible tooth forces fz norm and fz max
Determining the operation load level, both with and without radial The friction torque of an unloaded Slewing Ring can be determined The data is available in the Technical Information section and defi-
load, occurs along with the verification of the static load carrying approximately with the following equations: ned as the gearing circumferential force and refer to the tooth base.
MkD = 120 1.25 + 1.75 7.5 941 = 162.21 kNm capacity of the raceway. The values for fz max are calculated with a safety factor against
1000 Slewing Rings in the Series 116, 120, 125, 150, 920 and 932 with
If the prevailing load case lies below the limiting load line in the fracture of 2, the values for fz norm are calculated with SF=1 with
minimum clearance greater than zero respect to the tooth base fatigue. The pinion is thereby taken into
At this point it can be verified in the limiting load diagram, whether static limiting load diagram then the bolted connection is statically
adequately dimensioned. account as hardened and grounded with z1=17 and x1=0,5.
or not the pre-selected Slewing Ring is statically adequate. DL2
MwA = 0.2 In the Series 120 and 920 the safety factor against fracture is 1.5
2000 and the values for fz norm are determined with SF=0.85 and are
Dynamic load carrying capacity of the mounting bolts
Slewing Rings in the Series 116, 120, 125, 150, 920 and 932 with therefore in the fatigue strength range.
a minimum clearance of zero In the case of standard single-sided pinion bearings the static safety
Mostly, static dimensioning of a mounting bolt is sufficient.
In cases where very high numbers of stress reversals act on the DL2 factor should not be less than1.5. If a pinion with fewer teeth and
Slewing Ring, dynamic verification is necessary. Please contact our MwA = 0.3 with addendum modification coefficient is used, please contact our
2000 Engineering Department for assistance.
Engineering Department for assistance.
Slewing Rings in the Series 116, 120, 125, 150, 920 and 932 with
preloaded raceways The required gearing circumferential force can be determined
Frictional capability of bolt connection
from the existing or the required torque:
DL2
When radial loads act on the Slewing Ring, it must be ensured that MwA = 2.0
these loads can be transmitted without shearing forces occurring in 2000
2000 Md
the bolts. Therefore, it must be determined whether the radial load Fz =
can be transmitted via frictional contact between the mounting struc- mz
ture and the Slewing Ring.
According to whether Fz is calculated from the torque at the
Slewing Ring or the pinion, the corresponding number of teeth
nb Fsp and the corresponding friction torque must be used.
Frad max =
If the prevailing 18.8
radial load exceeds the limit value, please contact If more detailed calculations such as service life etc. are needed
our Engineering Department for assistance. please contact our Engineering Department for assistance.

62 63
Technical Information

Drive pinion Lubrication Shelf life of lubricants

The permissible tooth forces (gearing circumferential force) have To ensure flawless operation and a long usable life, adequate and Lubricants are subject to ageing even if unused. If after about 3
been determined with a pinion with z1=17 and x1=0.5. If no special regular lubrication is necessary. The grease fulfills the following years grease is not yet used, it should be replaced.
requirements exist with respect to the gear ratio the drive pinion functions:
can be designed with this gear data. The width of the pinion teeth
should also be more than the teeth on the Slewing Ring. The diffe- For the raceway: Design of mounting structure
rence between teeth widths should be approximately equal to the
module. Reduction of friction and wear in the rolling contacts Safe transmission of application loads and reliable operation of
If less than 17 teeth are used for the pinion, the gearing should be Corrosion protection Slewing Rings is achieved, along with other factors, through using
checked by calculations. The recommended gear quality for the Lubrication of seals adequately designed mounting structures. To ensure safe operation
pinion is 8e26 or better. In the case of very high tooth forces we Additional sealing effect of grease collar of Slewing Rings, there are certain minimum requirements to the
recommend a pinion tip relief and a wide crown design, please Low friction torque mounting structure:
contact our Engineering Department for assistance. The re-
commended toothing quality for the pinion is 8e26 or higher. For the gears:

Tooth backlash Smoother running


Lower wear
The tooth backlash is set at the highest point of the gear. It depends Reduced operating noise
on the module of the gear and is calculated according to the fol- Longer useful life
lowing equation: Lower heat development

Tooth backlash to be set Initial greasing

IMO Slewing Rings are supplied pre-lubricated. High-quality lithium-


df = 0.03 to 0.04 m
complex grease, based on mineral oil, with EP - additives according
to DIN 51825, KP2P-20 is the standard lubricant.
For setting the circumferential backlash, the tooth zone with the
run-out high point is marked with green. The backlash is to be set
Regreasing intervals
at this point.
Regreasing must be done at regular intervals, depending on frequency
Shock coefficient
of use and ambient operating conditions. General attention must
be payed to ensure that the grease used during the greasing is
As for the applications in which impact is expected, the appropriate
compatible with the sealing material. Special attention should be
impact coefficients must be considered when determining the Slew-
paid to ensure that lubricating grease types originally specified are
ing Rings`maximum torque rating.
used throughout the life of the unit.
Should you wish to use other types of grease, it must be verified
Service life
whether the grease is compatible with that used for initial greasing.
Please contact your grease manufacturer.
The service life of the gear depends on the operating conditions.
Please observe also the data in theInstallation and Maintenance Sufficient rigidity (see Installation & Operating Manual)
The following factors are key:
Instruction chapter. Maintain flatness according to Installation & Operating Manual
Torque No hard points (e.g. through cross beams)
Beside regular regreasing during operation, it is also necessary to Bolting surfaces must be machined flat
Output speed grease the Slewing Rings before and after long inactive periods. A hollow mounting structure is preferred
Duty factor Equally important is to regrease the equipment after cleaning. Use all mounting bolts
Ambient temperature Bolts of recommended strength should be used
Attention: Minimum strength of attached structure 500 N/mm2
Lubrication etc. Slewing Rings must not be cleaned with pressure washing
equipment. During pressure washing, large amounts of Very different mounting structure solutions can be used, depending
Drive power pressurized water can penetrate into the Slewing Ring through upon maximum load and application. If a hollow mounting structure
the sealing gap and cannot be removed, even by massive is intended flange thickness should be at least 50% of the overall
In principle the drive should be dimensioned conservatively. The regreasing. This will strongly reduce the usable service life of Slewing Ring height. The thickness of the hollow mounting structure
friction torque of a Slewing Ring can have a wide spread due to a Slewing Ring. should be about 1/3 of the flange thickness. For weight-critical appli-
the load combination and magnitude, the design of the mounting
cations, flange thickness can only be reduced if appropriate stiffening
structure, the raceway clearance and many other factors. Mixing greases ribs are provided and specifications on permissible flatness, perpendi-
If the required drive torque is determined from the friction torque cularity deviations and deformation under load are achieved. Values
of the Slewing Ring it is necessary to start with twice the calculated Greases with different thickeners and / or base oils should generally on this are specified in the Installation & Operating Manual.
value for the design of the drive power. Similarly additions should be not be mixed. The manufacturer should always confirm if different
made for the accelerating and decelerating of the moved masses and grease types can be mixed.
for any further power requirements according to the application.

64 65
A few simple steps for selecting a Slewing Ring

You will find a detailed procedure on the following pages!

Selecting a design

Load data determined


Start Rotational speed known
Tooth forces calculated
Application factors selected

No liability accepted

No

Checking of gearing

Selection Are all values


completed Yes in the
permissible
range

We recommend that the Slewing Ring selection is checked at IMO. Please fill in the
Application Data sheet on page 148 and provide a sketch of the application.

66 67
Technical Information

The correct Slewing Ring in 5 steps Example with static loads:


Application: Crane operating in medium conditions
Step 1: Determining the load Step 4: Checking of bolt connection Load data:
Axial load Fax = 268 kN
The first step is to determine the loads and rotational speeds. In the same limiting load diagram a check should also be made whe- Radial load Frad = 47 kN
Here it is necessary to consider both axial as well as radial loads ther the load point is below the bolt curve. The load must include the Tilting moment Mk = 670 kNm
and tilting moment loads. It is also important to take account of shock factors, the necessary safety factors and the calculated radial Tooth force Fz = 63 kN
those loads which can result from extreme situations such as high load. If the load is above the curve then the next size up or a stronger without radial load!
Max. rotational speed n = 1.3 1/min
wind loads, loads during assembly, possible tilting etc. series must be selected. In addition an examination should be carried
out with the equation on Page 62 to check whether frictional contact Special requirements: In the Series 320 the radial load is not taken into account in
Please note: This dimensioning is only calculated with is present. Internal toothed design, no special precision required. MkD, instead it is calculated against the radial load rating.
static loads. Dynamic loads have to be checked with Maximum outer diameter 1550 mm
IMO Application Engineering. Additional safety factor S0 = 1.1
Furthermore shock factors and the necessary safety factors must From the table of fa values, fa = 1.25 for medium duty cranes,
also be taken into account. from this you get:
Pre-selection - Series 125, Item 10 12-25 1355/1-03260
with DL = 1355 mm DA = 1455 mm

chart for 32-20 1250/2-06700

1289 kNm

Reading off the load point on the limiting load diagram.

Lastpunkt fr 12-25 1355/1-03260 nicht zulssig! The selected Slewing Ring 32-20 1250 / 2-06700 is in the
permissible zone.
Kurve fr 12-25 1355/1-03260
Static safety factor for the radial series (C0rad = 587 kN) under
radial load and the radial components of the tooth force:
587
No liability accepted 3.7

Step 2: Determining the Size Step 5: Static checking of gearing The permissible tooth force fz max is 187 kN and is therefore
Position 11 significantly above the existing tooth force Fz of 63 kN.
One or the other series is better suited according to the applica- A check should be made using the maximum expected tooth force The permissible rotational speed for this type is:
tion. To make the optimum choice the following table shall be to see whether the gearing has been adequately dimensioned. Position 10
n perm = 20000 / 1250 = 16 1/rpm
used to determine the suitable / adaptable size. If the existing maximum tooth force has been determined from
the friction torque under the maximum load, then this value must and is significantly over the existing rotational speed of 1.3 rpm.
Step 3: Static checking of raceway be doubled before comparison with the value in the table. If the This concludes the examination and the selection should be
Using the static limiting load diagram a check must be made on corresponding masses are accelerated or decelerated the respective confirmed by IMO together with details of the loads.
whether the existing forces including the safety factors to be used torques must also be taken into account.
do not exceed the permissible loads for the raceway.
If all the values for the selected Slewing Ring are in the According to the limiting load diagram the pre-selected type Please follow our Installation & Operating Manual.
The load, including the shock factors, the necessary safety factors
permissible zone the Slewing Ring can be used. Finally, we cannot be used. There is also no other usable Slewing Ring in
and the calculated radial load must be in the permissible zone of Following the Installation & Operating Manual is important for the
would strongly recommend that your choice is confirmed by this series.
the raceway curve and the expected rotational speeds must be reliability and safety of our product and has considerable influence
our Engineering Department. The new pre-selection for the maximum outer diameter of 1550
below the limit. If the load is above the curve then the next size on its expected service-life. The latest edition of the Installation &
up or a stronger series must be selected. If the expected rotational mm is the 3-row roller slewing ring type 32-20 1250/2-06700
In the case of high duty cycles or continuous running we Operating Manual is to be found at www.imo.de.
speed is above the limit then the next smaller size or another series with DA = 1461mm.
recommend that a service life calculation is carried out by our Contact us to receive a paper copy.
with higher limits must be selected.
Engineering Department.

68 69
Series 920, 932
Series Overview - Ball Slewing Rings with flange rings

Operating conditions
Permissible temperature range -25C to +70C
Maximum permissible rotational speed nperm = 40000 / DL
With a horizontal rotational axis nperm = 20000 / DL
(DL = raceway diameter)
Compressive load
Bolt grade 10.9

Typical applications
Simple turntables, slewing mechanisms, bogies, light cranes and construction machinery.

Characteristics
Robust design for rough mounting structure
Cost-optimized design
Ideally suitable for applications with low precision requirements
For Series 920 precision versions are available
Permissible tooth force for the individual sizes

Limiting load diagrams, series 920 / 932


Please refer to the explanations in the Technical Information section of the catalog.

Series 920
Series 932
Tooth force fz norm and fz max [kN]

Equivalent tilting moment [kNm]


Static load ratings for the individual sizes
Static load rating [kN]

Equivalent axial load [kN]

70 71
Series 920 standard design

Untoothed Limiting load diagram for compressive loads Series 920

Dimension and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,
outer ring

outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring

inner ring
Diameter,

Diameter,
Position

Dynamic
Weight

Static
Da di Di da a b G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
90-20 0311/0-07002 1 418 204 315.5 312.5 353 269 19 390 8 232 12 89 208 140 140
90-20 0411/0-07012 2 518 304 415.5 412.5 453 369 25 490 8 332 12 118 275 156 156
90-20 0541/0-07022 3 648 434 545.5 542.5 583 499 33 620 10 462 14 155 362 173 174
90-20 0641/0-07032 4 748 534 645.5 642.5 683 599 40 720 12 562 16 184 429 184 185
90-20 0741/0-07042 5 848 634 745.5 742.5 783 699 46 820 12 662 16 212 496 194 195
90-20 0841/0-07052 6 948 734 845.5 842.5 883 799 52 920 14 762 18 241 563 204 205
90-20 0941/0-07062 7 1048 834 945.5 942.5 983 899 58 1020 16 862 20 269 630 213 214
90-20 1091/0-07072 8 1198 984 1095.5 1092.5 1133 1049 68 1170 16 1012 20 312 730 224 225

External toothed

Dimension and weight Mounting holes Gearing and tooth forces Load ratings
Teilkreisdurchmesser
Pitch circle diameter,

Pitch circle diameter,


Drawing number

zulssige Zahnkraft

maximal zulssige
Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Zhnezahl
Outer ring
outer ring

outer ring

outer ring

Zahnkraft
inner ring

inner ring

inner ring

inner ring

inner ring
Diameter,
Position

Dynamic
Weight

Modul

Static
Da di Di da b G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
91-20 0311/1-07102 1 404.0 204 315.5 312.5 269 23 355 10 232 12 395 5 79 11.75 23.5 89 208 140 140
91-20 0411/1-07112 2 504.0 304 415.5 412.5 369 30 455 10 332 12 495 5 99 11.75 23.5 118 275 156 156
91-20 0541/1-07122 3 640.8 434 545.5 542.5 499 42 585 14 462 14 630 6 105 17.5 32.7 155 362 173 174
91-20 0641/1-07132 4 742.8 534 645.5 642.5 599 53 685 16 562 16 732 6 122 17.5 32.7 184 429 184 185
91-20 0741/1-07142 5 838.8 634 745.5 742.5 699 56 785 18 662 16 828 6 138 17.5 32.7 212 496 194 195
91-20 0841/1-07152 6 950.4 734 845.5 842.5 799 68 885 18 762 18 936 8 117 27.9 50.3 241 563 204 205
91-20 0941/1-07162 7 1046.4 834 945.5 942.5 899 75 985 20 862 20 1032 8 129 27.9 50.3 269 630 213 214
91-20 1091/1-07172 8 1198.4 984 1095.5 1092.5 1049 87 1135 22 1012 20 1184 8 148 27.9 50.3 312 730 224 225

Internal toothed

Dimension and weight Mounting holes Gearing and tooth forces Load ratings
Teilkreisdurchmesser
Pitch circle diameter,

Pitch circle diameter,


Drawing number

zulssige Zahnkraft

maximal zulssige
Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Zhnezahl
outer ring

outer ring

outer ring

outer ring

outer ring

Zahnkraft
inner ring

inner ring

inner ring

inner ring
Diameter,
Position

Dynamic
Weight

Modul

Static

Da di Di da a G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
92-20 0311/1-07202 1 418 225 315.5 312.5 353 21 390 8 275 12 235 5 47 11.9 22.7 89 208 140 140
92-20 0411/1-07212 2 518 325 415.5 412.5 453 28 490 8 375 12 335 5 67 11.9 22.7 118 275 156 156
92-20 0541/1-07222 3 648 444 545.5 542.5 583 39 620 10 505 16 456 6 76 17.5 32.9 155 362 173 174
92-20 0641/1-07232 4 748 546 645.5 642.5 683 46 720 12 605 18 558 6 93 17.5 32.9 184 429 184 185
92-20 0741/1-07242 5 848 648 745.5 742.5 783 52 820 12 705 20 660 6 110 17.5 32.9 212 496 194 195
92-20 0841/1-07252 6 948 736 845.5 842.5 883 63 920 14 805 20 752 8 94 28 50.5 241 563 204 205
92-20 0941/1-07262 7 1048 840 945.5 942.5 983 69 1020 16 905 22 856 8 107 28 50.5 269 630 213 214
92-20 1091/1-07272 8 1198 984 1095.5 1092.5 1133 83 1170 16 1055 24 1000 8 125 28 50.5 312 730 224 225

72 73
Series 920 precision version

Untoothed Limiting load diagram for compressive loads Series 920

Dimension and weight Mounting holes Load ratings

outer ring Zentrierung

inner ring Zentrierung

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Outer ring
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Diameter,

Diameter,
Position

Dynamic
Weight

Static
Daz diz Di da a b G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
90-20 0311/0-07003 1 417 -0.10 205 +0.07 315.5 312.5 353 269 19 390 8 232 12 89 208 140 140
90-20 0411/0-07013 2 517 -0.11 305 +0.08 415.5 412.5 453 369 25 490 8 332 12 118 275 156 156
90-20 0541/0-07023 3 647 -0.13 435 +0.10 545.5 542,5 583 499 33 620 10 462 14 155 362 173 174
90-20 0641/0-07033 4 747 -0.13 535 +0.11 645.5 642.5 683 599 40 720 12 562 16 184 429 184 185
90-20 0741/0-07043 5 847 -0.14 635 +0.13 745.5 742.5 783 699 46 820 12 662 16 212 496 194 195
90-20 0841/0-07053 6 947 -0.14 735 +0.13 845.5 842.5 883 799 52 920 14 762 18 241 563 204 205
90-20 0941/0-07063 7 1047 -0.17 835 +0.14 945.5 942.5 983 899 58 1020 16 862 20 269 630 213 214
90-20 1091/0-07073 8 1197 -0.17 985 +0.14 1095.5 1092.5 1133 1049 68 1170 16 1012 20 312 730 224 225

External toothed

Dimension and weight Mounting holes Gearing and tooth forces Load ratings
outer ring Zentrierung
inner ring Zentrierung

Teilkreisdurchmesser
Pitch circle diameter,

Pitch circle diameter,


Drawing number

zulssige Zahnkraft

maximal zulssige
Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Zhnezahl
outer ring

outer ring

outer ring

Zahnkraft
inner ring

inner ring

inner ring

inner ring
Diameter,
Position

Dynamic
Weight

Modul

Static
Da diz Diz da b G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
91-20 0311/1-07103 1 404.0 205 +0.07 317 +0.09 312.5 269 23 355 10 232 12 395 5 79 11.75 23.5 89 208 140 140
91-20 0411/1-07113 2 504.0 305 +0.08 417 +0.10 412.5 369 30 455 10 332 12 495 5 99 11.75 23.5 118 275 156 156
91-20 0541/1-07123 3 640.8 435 +0.10 547 +0.11 542.5 499 42 585 14 462 14 630 6 105 17.5 32.7 155 362 173 174
91-20 0641/1-07133 4 742.8 535 +0.11 647 +0.13 642.5 599 53 685 16 562 16 732 6 122 17.5 32.7 184 429 184 185
91-20 0741/1-07143 5 838.8 635 +0.13 747 +0.13 742.5 699 56 785 18 662 16 828 6 138 17.5 32.7 212 496 194 195
91-20 0841/1-07153 6 950.4 735 +0.13 847 +0.14 842.5 799 68 885 18 762 18 936 8 117 27.9 50.3 241 563 204 205
91-20 0941/1-07163 7 1046.4 835 +0.14 947 +0.14 942.5 899 75 985 20 862 20 1032 8 129 27.9 50.3 269 630 213 214
91-20 1091/1-07173 8 1198.4 985 +0.14 1097 +0.17 1092.5 1049 87 1135 22 1012 20 1184 8 148 27.9 50.3 312 730 224 225

Internal toothed

Dimension and weight Mounting holes Gearing and tooth forces Load ratings
outer ring Zentrierung

inner ring Zentrierung

Teilkreisdurchmesser
Pitch circle diameter,

Pitch circle diameter,


Drawing number

zulssige Zahnkraft

maximal zulssige
Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Zhnezahl
outer ring

outer ring

outer ring

outer ring

Zahnkraft
inner ring

inner ring

inner ring
Diameter,
Position

Dynamic
Weight

Modul

Static

Daz di Di daz a G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
92-20 0311/1-07203 1 417 -0.10 225 315.5 311 -0.08 353 21 390 8 275 12 235 5 47 11.9 22.7 89 208 140 140
92-20 0411/1-07213 2 517 -0.11 325 415.5 411 -0.10 453 28 490 8 375 12 335 5 67 11.9 22.7 118 275 156 156
92-20 0541/1-07223 3 647 -0.13 444 545.5 541 -0.11 583 39 620 10 505 16 456 6 76 17.5 32.9 155 362 173 174
92-20 0641/1-07233 4 747 -0.13 546 645.5 641 -0.13 683 46 720 12 605 18 558 6 93 17.5 32.9 184 429 184 185
92-20 0741/1-07243 5 847 -0.14 648 745.5 741 -0.13 783 52 820 12 705 20 660 6 110 17.5 32.9 212 496 194 195
92-20 0841/1-07253 6 947 -0.14 736 845.5 841 -0.14 883 63 920 14 805 20 752 8 94 28 50.5 241 563 204 205
92-20 0941/1-07263 7 1047 -0.17 840 945.5 941 -0.14 983 69 1020 16 905 22 856 8 107 28 50.5 269 630 213 214
92-20 1091/1-07273 8 1197 -0.17 984 1095.5 1091 -0.17 1133 83 1170 16 1055 24 1000 8 125 28 50.5 312 730 224 225

74 75
Series 932 standard design

Untoothed Limiting load diagram for compressive loads Series 932

Dimension and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,
Outer ring

Outer ring

Outer ring

Outer ring

Outer ring
inner ring

inner ring

inner ring

inner ring

inner ring
Diameter,

Diameter,
Position

Dynamic
Weight

Static
Da di Di da a b G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
90-32 0955/0-06015 1 1100 805 955 955 1017 893 131 1060 30 845 30 1029 2754 411 479
90-32 1055/0-06025 2 1200 905 1055 1055 1117 993 145 1160 30 945 30 1137 3043 427 497
90-32 1155/0-06035 3 1300 1005 1155 1155 1217 1093 159 1260 36 1045 36 1245 3331 442 514
90-32 1255/0-06045 4 1400 1105 1255 1255 1317 1193 172 1360 42 1145 42 1353 3619 456 531
90-32 1355/0-06055 5 1500 1205 1355 1355 1417 1293 186 1460 42 1245 42 1460 3908 469 546
90-32 1455/0-06065 6 1600 1305 1455 1455 1517 1393 200 1560 48 1345 48 1568 4196 482 561

External toothed

Dimension and weight Mounting holes Gearing and tooth forces Load ratings
Teilkreisdurchmesser
Pitch circle diameter,

Pitch circle diameter,


Drawing number

zulssige Zahnkraft

maximal zulssige
Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Zhnezahl
Outer ring

Outer ring

Outer ring

Outer ring

Zahnkraft
inner ring

inner ring

inner ring

inner ring

inner ring
Diameter,
Position

Dynamic
Weight

Modul

Static
Da di Di da b G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
91-32 0955/1-06115 1 1096.2 805 955 955 893 165 1016 30 845 30 1080 9 120 36 65 1029 2754 411 479
91-32 1055/1-06125 2 1198 905 1055 1055 993 183 1116 30 945 30 1180 10 118 43 76 1137 3043 427 497
91-32 1155/1-06135 3 1298 1005 1155 1155 1093 200 1216 36 1045 36 1280 10 128 43 76 1245 3331 442 514
91-32 1255/1-06145 4 1398 1105 1255 1255 1193 216 1316 42 1145 42 1380 10 138 43 76 1353 3619 456 531
91-32 1355/1-06155 5 1498 1205 1355 1355 1293 234 1416 42 1245 42 1480 10 148 43 76 1460 3908 469 546
91-32 1455/1-06165 6 1598 1305 1455 1455 1393 250 1516 48 1345 48 1580 10 158 43 76 1568 4196 482 561

Internal toothed

Dimension and weight Mounting holes Gearing and tooth forces Load ratings
Teilkreisdurchmesser
Pitch circle diameter,

Pitch circle diameter,


Drawing number

zulssige Zahnkraft

maximal zulssige
Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,

Zhnezahl
Outer ring

Outer ring

Outer ring

Outer ring

Outer ring

Zahnkraft
inner ring

inner ring

inner ring

inner ring
Diameter,
Position

Dynamic
Weight

Modul

Static

Da di Di da a G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
92-32 0955/1-06215 1 1100 812 955 955 1017 159 1060 30 894 30 830 10 83 47 86 1029 2754 411 479
92-32 1055/1-06225 2 1200 912 1055 1055 1117 176 1160 30 994 30 930 10 93 47 86 1137 3043 427 497
92-32 1155/1-06235 3 1300 1012 1155 1155 1217 192 1260 36 1094 36 1030 10 103 47 86 1245 3331 442 514
92-32 1255/1-06245 4 1400 1112 1255 1255 1317 208 1360 42 1194 42 1130 10 113 47 86 1353 3619 456 531
92-32 1355/1-06255 5 1500 1212 1355 1355 1417 226 1460 42 1294 42 1230 10 123 47 86 1460 3908 469 546
92-32 1455/1-06265 6 1600 1312 1455 1455 1517 243 1560 48 1394 48 1330 10 133 47 86 1568 4196 482 561

76 77
Series 116, 120, 125, 150
Series Overview - Single Row Ball Slewing Rings

Operating conditions

Permissible temperature range -25C to +70C


Maximum Permissible rotational speed nperm = 40000 / DL (for 120, 125, 150)
Maximum Permissible rotational speed nperm = 80000 / DL (for 116)
(DL = raceway diameter)
Compressive load
Bolt grade 10.9

Typical applications
Turntables, slewing mechanisms, bogies, light to medium-sized cranes and construction machinery, winders,
wind energy turbines, handling equipment.

Characteristics

Robust design
Insensitive to vibrations
Cost-optimized design
Medium precision
For Series 116 & 120 precision versions are available

Permissible tooth force for the individual sizes

Limiting load diagrams, series 116, 120, 125, 150


Please refer to the explanations in the Technical Information section of the catalog.

Static load ratings for the individual sizes

78 79
Series 116 standard design
Untoothed Limiting load diagram for compressive loads Series 116

Dimensions and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Weight

Static
Da di Di da G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
10-16 0100/0-08000 1 180 40 103 97 5 140 6 60 6 51 103 71 61
10-16 0200/0-08010 2 280 140 203 197 10 240 12 160 12 101 207 99 85
10-16 0300/0-08020 3 380 240 303 297 14 340 20 260 20 152 310 117 101
10-16 0400/0-08030 4 480 340 403 397 19 440 24 360 24 203 414 130 112
10-16 0500/0-08040 5 580 440 503 497 24 540 28 460 28 253 517 142 122

External toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
11-16 0100/1-08100 1 180 40 103 97 140 6 6 60 6 172 4 43 9.0 16.0 51 103 71 61
11-16 0200/1-08110 2 280 140 203 197 240 12 12 160 12 272 4 68 9.2 17.0 101 207 99 85
11-16 0300/1-08120 3 380 240 303 297 340 20 20 260 20 372 4 93 9.2 17.8 152 310 117 101
11-16 0400/1-08130 4 480 340 403 397 440 24 24 360 24 472 4 118 9.4 18.0 203 414 130 112
11-16 0500/1-08140 5 580 440 503 497 540 28 28 460 28 572 4 143 9.4 18.5 253 517 142 122

80 81
Series 116 precision version
Untoothed Limiting load diagram for compressive loads Series 116

Dimensions and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
outer ring, spigot

inner ring, spigot


Inside diameter,

Inside diameter,

Inside diameter,
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Weight

Static
Da Daz di diz Di da G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
10-16 0100/0-08003 1 180 178 -0.06 40 42 +0.04 103 97 5 140 6 60 6 51 103 71 61
10-16 0200/0-08013 2 280 278 -0.08 140 142 +0.06 203 197 10 240 12 160 12 101 207 99 85
10-16 0300/0-08023 3 380 378 -0.09 240 242 +0.07 303 297 14 340 20 260 20 152 310 117 101
10-16 0400/0-08033 4 480 478 -0.10 340 342 +0.09 403 397 19 440 24 360 24 203 414 130 112
10-16 0500/0-08043 5 580 578 -0.11 440 442 +0.10 503 497 24 540 28 460 28 253 517 142 122

External toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
inner ring, spigot

Number of teeth
Inside diameter,

Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di diz Di da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
11-16 0100/1-08103 1 180 40 42 +0.04 103 97 5 140 6 60 6 172 4 43 9.0 16.0 51 103 71 61
11-16 0200/1-08113 2 280 140 142 +0.06 203 197 9 240 12 160 12 272 4 68 9.2 17.0 101 207 99 85
11-16 0300/1-08123 3 380 240 242 +0.07 303 297 14 340 20 260 20 372 4 93 9.2 17.8 152 310 117 101
11-16 0400/1-08133 4 480 340 342 +0.09 403 397 18 440 24 360 24 472 4 118 9.4 18.0 203 414 130 112
11-16 0500/1-08143 5 580 440 442 +0.10 503 497 22 540 28 460 28 572 4 143 9.4 18.5 253 517 142 122

82 83
Series 120 standard design
Untoothed Limiting load diagram for compressive loads Series 120

Dimensions and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Weight

Static
Da di Di da G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
10-20 0311/0-02002 1 386 242 315.5 312.5 21 360 20 268 20 192 448 140 140
10-20 0411/0-02012 2 486 342 415.5 412.5 29 460 24 368 24 254 592 156 156
10-20 0541/0-02022 3 616 472 545.5 542.5 37 590 32 498 32 334 780 173 174
10-20 0641/0-02032 4 716 572 645.5 642.5 44 690 36 598 36 395 924 184 185
10-20 0741/0-02042 5 816 672 745.5 742.5 52 790 40 698 40 457 1068 194 195
10-20 0841/0-02052 6 916 772 845.5 842.5 59 890 40 798 40 519 1212 204 205
10-20 0941/0-02062 7 1016 872 945.5 942.5 66 990 44 898 44 580 1356 213 214
10-20 1091/0-02072 8 1166 1022 1095.5 1092.5 77 1140 48 1048 48 673 1572 224 225

External toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
11-20 0311/1-02102 1 404.0 242 315.5 312.5 23 355 20 268 20 395 5 79 11.75 23.5 192 448 140 140
11-20 0411/1-02112 2 504.0 342 415.5 412.5 32 455 20 368 24 495 5 99 11.75 23.5 254 592 156 156
11-20 0541/1-02122 3 640.8 472 545.5 542.5 43 585 28 498 32 630 6 105 17.5 32.7 334 780 173 174
11-20 0641/1-02132 4 742.8 572 645.5 642.5 52 685 32 598 36 732 6 122 17.5 32.7 395 924 184 185
11-20 0741/1-02142 5 838.8 672 745.5 742.5 58 785 36 698 40 828 6 138 17.5 32.7 457 1068 194 195
11-20 0841/1-02152 6 950.4 772 845.5 842.5 71 885 36 798 40 936 8 117 27.9 50.3 519 1212 204 205
11-20 0941/1-02162 7 1046.4 872 945.5 942.5 77 985 40 898 44 1032 8 129 27.9 50.3 580 1356 213 214
11-20 1091/1-02172 8 1198.4 1022 1095.5 1092.5 90 1135 44 1048 48 1184 8 148 27.9 50.3 673 1572 224 225

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
12-20 0311/1-02202 1 386 225 315.5 312.5 22 360 20 275 24 235 5 47 11.9 22.7 192 448 140 140
12-20 0411/1-02212 2 486 325 415.5 412.5 31 460 24 375 24 335 5 67 11.9 22.7 254 592 156 156
12-20 0541/1-02222 3 616 444 545.5 542.5 43 590 32 505 32 456 6 76 17.5 32.9 334 780 173 174
12-20 0641/1-02232 4 716 546 645.5 642.5 50 690 36 605 36 558 6 93 17.5 32.9 395 924 184 185
12-20 0741/1-02242 5 816 648 745.5 742.5 57 790 40 705 40 660 6 110 17.5 32.9 457 1068 194 195
12-20 0841/1-02252 6 916 736 845.5 842.5 69 890 40 805 40 752 8 94 28 50.5 519 1212 204 205
12-20 0941/1-02262 7 1016 840 945.5 942.5 75 990 44 905 44 856 8 107 28 50.5 580 1356 213 214
12-20 1091/1-02272 8 1166 984 1095.5 1092.5 91 1140 48 1055 48 1000 8 125 28 50.5 673 1572 224 225

84 85
Series 120 precision version

Untoothed Limiting load diagram for compressive loads Series 120

Dimensions and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
outer ring, spigot

inner ring, spigot


Inside diameter,

Inside diameter,

Inside diameter,
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Weight

Static
Da Daz di diz Di da G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
10-20 0311/0-02003 1 386 384.5 -0.09 242 243.5 +0.07 315.5 312.5 21 360 20 268 20 192 448 140 140
10-20 0411/0-02013 2 486 484.5 -0.10 342 343.5 +0.09 415.5 412.5 29 460 24 368 24 254 592 156 156
10-20 0541/0-02023 3 616 614.5 -0.11 472 473.5 +0.10 545.5 542.5 37 590 32 498 32 334 780 173 174
10-20 0641/0-02033 4 716 714.5 -0.13 572 573.5 +0.11 645.5 642.5 44 690 36 598 36 395 924 184 185
10-20 0741/0-02043 5 816 814.5 -0.14 672 673.5 +0.13 745.5 742.5 52 790 40 698 40 457 1068 194 195
10-20 0841/0-02053 6 916 914.5 -0.14 772 773.5 +0.13 845.5 842.5 59 890 40 798 40 519 1212 204 205
10-20 0941/0-02063 7 1016 1014.5 -0.17 872 873.5 +0.14 945.5 942.5 66 990 44 898 44 580 1356 213 214
10-20 1091/0-02073 8 1166 1164.5 -0.17 1022 1023.5 +0.17 1095.5 1092.5 77 1140 48 1048 48 673 1572 224 225

External toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
outer ring, spigot
inner ring, spigot

Number of teeth
Inside diameter,

Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di diz Diz da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
11-20 0311/1-02103 1 404.0 242 243.5 +0.07 317 +0.09 312.5 23 355 20 268 20 395 5 79 11.75 23.5 192 448 140 140
11-20 0411/1-02113 2 504.0 342 343.5 +0.09 417 +0.10 412.5 32 455 20 368 24 495 5 99 11.75 23.5 254 592 156 156
11-20 0541/1-02123 3 640.8 472 473.5 +0.10 547 +0.11 542.5 43 585 28 498 32 630 6 105 17.5 32.7 334 780 173 174
11-20 0641/1-02133 4 742.8 572 573.5 +0.11 647 +0.13 642.5 52 685 32 598 36 732 6 122 17.5 32.7 395 924 184 185
11-20 0741/1-02143 5 838.8 672 673.5 +0.13 747 +0.13 742.5 58 785 36 698 40 828 6 138 17.5 32.7 457 1068 194 195
11-20 0841/1-02153 6 950.4 772 773.5 +0.13 847 +0.14 842.5 71 885 36 798 40 936 8 117 27.9 50.3 519 1212 204 205
11-20 0941/1-02163 7 1046.4 872 873.5 +0.14 947 +0.14 942.5 77 985 40 898 44 1032 8 129 27.9 50.3 580 1356 213 214
11-20 1091/1-02173 8 1198.4 1022 1023.5 +0.17 1097 +0.17 1092.5 90 1135 44 1048 48 1184 8 148 27.9 50.3 673 1572 224 225

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
outer ring, spigot

outer ring, spigot

Number of teeth
Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da Daz di Di daz G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
12-20 0311/1-02203 1 386 384.5 -0.09 225 315.5 311 -0.08 22 360 24 275 24 235 5 47 11.9 22.7 192 448 140 140
12-20 0411/1-02213 2 486 484.5 -0.10 325 415.5 411 -0.10 31 460 24 375 24 335 5 67 11.9 22.7 254 592 156 156
12-20 0541/1-02223 3 616 614.5 -0.11 444 545.5 541 -0.11 43 590 32 505 32 456 6 76 17.5 32.9 334 780 173 174
12-20 0641/1-02233 4 716 714.5 -0.13 546 645.5 641 -0.13 50 690 36 605 36 558 6 93 17.5 32.9 395 924 184 185
12-20 0741/1-02243 5 816 814.5 -0.14 648 745.5 741 -0.13 57 790 40 705 40 660 6 110 17.5 32.9 457 1068 194 195
12-20 0841/1-02253 6 916 914.5 -0.14 736 845.5 841 -0.14 69 890 40 805 40 752 8 94 28 50.5 519 1212 204 205
12-20 0941/1-02263 7 1016 1014.5 -0.17 840 945.5 941 -0.14 75 990 44 905 44 856 8 107 28 50.5 580 1356 213 214
12-20 1091/1-02273 8 1166 1164.5 -0.17 984 1095.5 1091 -0.17 91 1140 48 1055 48 1000 8 125 28 50.5 673 1572 224 225

86 87
Series 125 standard design

Untoothed Limiting load diagram for compressive loads Series 125

Dimensions and weight Mounting holes Load ratings

Pitch circle diameter,

Pitch circle diameter,


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,
Inside diameter,

Inside diameter,
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Weight

Static
Da di Di da G La na Li ni Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [kN] [kN] [kN] [kN]
10-25 0455/0-04010 1 555 355 457 453 53 515 18 395 18 453 1213 249 289
10-25 0555/0-04020 2 655 455 557 553 65 615 20 495 20 553 1480 268 311
10-25 0655/0-04030 3 755 555 657 653 76 715 24 595 24 653 1746 284 331
10-25 0755/0-04040 4 855 655 757 753 90 815 24 695 24 752 2013 300 349
10-25 0855/0-03010 5 955 755 857 853 101 915 28 795 28 852 2280 316 367
10-25 0955/0-03020 6 1055 855 957 953 115 1015 30 895 30 952 2546 328 382
10-25 1055/0-03030 7 1155 955 1057 1053 128 1115 30 995 30 1051 2813 340 396
10-25 1155/0-03040 8 1255 1055 1157 1153 139 1215 36 1095 36 1151 3080 351 409
10-25 1255/0-03050 9 1355 1155 1257 1253 150 1315 42 1195 42 1240 3346 364 424
10-25 1355/0-03060 10 1455 1255 1357 1353 163 1415 42 1295 42 1350 3613 374 435
10-25 1455/0-03070 11 1555 1355 1457 1453 174 1515 48 1395 48 1450 3879 383 447

External toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
11-25 0455/1-04110 1 590.4 355 457 453 74 516 18 395 18 576 8 72 28 52 453 1213 249 289
11-25 0555/1-04120 2 694.4 455 557 553 93 616 20 495 20 680 8 85 28 52 553 1480 268 311
11-25 0655/1-04130 3 798.4 555 657 653 111 716 24 595 24 784 8 98 28 52 653 1746 284 331
11-25 0755/1-04140 4 898 655 757 753 125 816 24 695 24 882 9 98 36 65 752 2013 300 349
11-25 0855/1-03110 5 997 755 857 853 145 916 28 795 28 981 9 109 36 65 852 2280 316 367
11-25 0955/1-03120 6 1096 855 957 953 155 1016 30 895 30 1080 9 120 36 65 952 2546 328 382
11-25 1055/1-03130 7 1198 955 1057 1053 171 1116 30 995 30 1180 10 118 43 76 1051 2813 340 396
11-25 1155/1-03140 8 1298 1055 1157 1153 186 1216 36 1095 36 1280 10 128 43 76 1151 3080 351 409
11-25 1255/1-03150 9 1398 1155 1257 1253 201 1316 42 1195 42 1380 10 138 43 76 1240 3346 364 424
11-25 1355/1-03160 10 1498 1255 1357 1353 218 1416 42 1295 42 1480 10 148 43 76 1350 3613 374 435
11-25 1455/1-03170 11 1598 1355 1457 1453 233 1516 48 1395 48 1580 10 158 43 76 1450 3879 383 447

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

Outside diameter,

Outside diameter,

Number of holes,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

tooth force
outer ring

outer ring

outer ring

outer ring
inner ring

inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La na Li ni do m z2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [kg] [mm] [-] [mm] [-] [mm] [mm] [-] [kN] [kN] [kN] [kN] [kN] [kN]
12-25 0455/1-04210 1 555 304 457 453 64 515 18 394 18 320 8 40 32 64 453 1213 249 289
12-25 0555/1-04220 2 655 416 557 553 76 615 20 494 20 432 8 54 32 64 553 1480 268 311
12-25 0655/1-04230 3 755 512 657 653 102 715 24 594 24 528 8 66 32 64 653 1746 284 331
12-25 0755/1-04240 4 855 610 757 753 119 815 24 694 24 630 10 63 47 86 752 2013 300 349
12-25 0855/1-03210 5 955 710 857 853 137 915 28 794 28 730 10 73 47 86 852 2280 316 367
12-25 0955/1-03220 6 1055 810 957 953 149 1015 30 894 30 830 10 83 47 86 952 2546 328 382
12-25 1055/1-03230 7 1155 910 1057 1053 165 1115 30 994 30 930 10 93 47 86 1051 2813 340 396
12-25 1155/1-03240 8 1255 1010 1157 1153 180 1215 36 1094 36 1030 10 103 47 86 1151 3080 351 409
12-25 1255/1-03250 9 1355 1110 1257 1253 195 1315 42 1194 42 1130 10 113 47 86 1240 3346 364 424
12-25 1355/1-03260 10 1455 1210 1357 1353 212 1415 42 1294 42 1230 10 123 47 86 1350 3613 374 435
12-25 1455/1-03270 11 1555 1310 1457 1453 227 1515 48 1394 48 1330 10 133 47 86 1450 3879 383 447

88 89
Series 150 standard design

External toothed Limiting load diagram for compressive loads Series 150

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Number of holes per
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

midification coeff.
Outside diameter,

Outside diameter,

Number of teeth
Inside diameter,

Inside diameter,

Addendum

tooth force
pitch circle
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax C rad C ax
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN]
11-50 1900/2-06400 1 2139.2 1729 1898 1902 820 2005 1795 36 2100 14 150 +0.50 132 229 3323 8891 1129 1315
11-50 2130/2-06410 2 2380.8 1959 2128 2132 931 2235 2025 48 2336 16 146 +0.50 155 273 3725 9968 1177 1371
11-50 2355/2-06420 3 2604.8 2184 2353 2357 1024 2460 2250 54 2560 16 160 +0.50 155 273 4118 11020 1223 1425
11-50 2645/2-06430 4 2892.8 2474 2643 2647 1142 2750 2540 60 2848 16 178 +0.50 155 273 4625 12378 1279 1490

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Number of holes per
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

midification coeff.
Outside diameter,

Outside diameter,

Number of teeth
Inside diameter,

Inside diameter,

Addendum

tooth force
pitch circle
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax C rad C ax


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN]
12-50 1800/2-06500 5 1971 1554 1798 1802 762 1905 1695 36 1568 14 112 -0.50 141 254 3148 8423 1105 1286
12-50 2000/2-06510 6 2171 1764 1998 2002 843 2105 1895 40 1778 14 127 -0.50 141 254 3457 9359 1153 1343
12-50 2240/2-06520 7 2411 1984 2238 2242 961 2345 2135 48 2000 16 125 -0.50 166 290 3917 10482 1198 1395
12-50 2490/2-06530 8 2661 2240 2488 2492 1053 2595 2385 54 2256 16 141 -0.50 166 290 4354 11652 1250 1256
12-50 2800/2-06540 9 2971 2544 2798 2802 1205 2905 2695 60 2560 16 160 -0.50 166 290 4896 13103 1301 1516

90 91
Series 840, 850
Series overview - Double Axial Slewing Rings

Operating conditions

Permissible temperature range -25C to +70C


Maximum permissible rotational speed nperm = 40000 / DL
(DL = raceway diameter)
Compressive load
Bolt grade 10.9

Typical applications
Turntables, slewing mechanisms, bogies, winders, medium-sized to large cranes and construction machinery.
Applications such as for Single Row Ball Slewing Rings with higher axial load.

Characteristics

Robust design
Insensitive to rough mounting structure
Suitable for vibration conditions
High axial loads can be transmitted

Permissible tooth force for the individual sizes

Limiting load diagrams, series 840, 850


Please refer to the explanations in the Technical Information section of the catalog.

Static load ratings for the individual sizes

92 93
Series 840 standard design

External toothed Limiting load diagram for compressive loads Series 840

Dimensions and weight Mounting holes Gearing and thooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
81-40 2240/2-07600 1 2524.8 2090 2275 2272 1316 2375 2145 48 2480 16 155 +0.50 176 307 2102 10580 8632 536 1265 1007
81-40 2619/2-07605 2 2912.4 2465 2654 2651 1615 2755 2520 52 2862 18 159 +0.50 205 357 2459 12371 10097 568 1341 1067
81-40 2795/2-07610 3 3096.0 2645 2830 2827 1723 2930 2700 54 3040 20 152 +0.50 233 408 2625 13201 10778 580 1375 1091
81-40 2915/2-07615 4 3216.0 2765 2950 2947 1790 3050 2820 60 3160 20 158 +0.50 233 408 2738 13768 11242 590 1399 1109
81-40 3150/2-07620 5 3456.0 3000 3185 3182 1969 3285 3065 60 3400 20 170 +0.50 233 40 2959 14878 12151 607 1436 1141

Internal toothed

Dimensions and weight Mounting holes Gearing and thooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
82-40 2199/2-07625 1 2350 1920 2168 2164 1238 2295 2065 52 1936 16 121 -0.50 178 338 2078 10387 8535 532 1267 1000
82-40 2622/2-07630 2 2770 2336 2590 2587 1495 2715 2485 60 2352 16 147 -0.50 178 338 2477 12731 10171 568 1345 1068
82-40 2950/2-07635 3 3100 2646 2918 2915 1764 3045 2815 60 2664 18 148 -0.50 214 385 2786 13934 11439 594 1403 1117
82-40 3300/2-07640 4 3450 3006 3268 3265 1935 3395 3165 66 3024 18 168 -0.50 214 385 3115 15587 12793 619 1462 1162

94 95
Series 850 standard design

External toothed Limiting load diagram for compressive loads Series 850

Dimensions and weight Mounting holes Gearing and thooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
81-50 2987/2-06940 1 3290.4 2820 3022 3025 2288 3130 2880 66 3240 18 180 +0.50 227 403 3424 17019 14062 749 1774 1408
81-50 3167/2-06945 2 3470.4 3000 3202 3205 2431 3310 3060 66 3420 18 190 +0.50 227 403 3631 18044 14912 766 1810 1439
81-50 3347/2-06950 3 3650.4 3180 3382 3385 2566 3490 3240 72 3600 18 200 +0.50 227 403 3838 19070 15762 782 1853 1469
81-50 3567/2-06955 4 3866.4 3400 3602 3605 2702 3710 3460 78 3816 18 212 +0.50 227 403 4091 20323 16801 799 1892 1502
81-50 3747/2-06960 5 4046.4 3580 3782 3785 2837 3890 3640 84 3996 18 222 +0.50 227 403 4298 21349 17651 814 1932 1530
81-50 4140/2-06965 6 4456.0 3970 4175 4178 3282 4285 4030 90 4400 20 220 +0.50 260 465 4750 23588 19508 844 2002 1587

Internal toothed

Dimensions and weight Mounting holes Gearing and thooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes,

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
82-50 2559/2-06970 1 2725 2250 2522 2524 1892 2670 2410 60 2268 18 126 -0.50 240 440 2955 14580 12134 710 1678 1334
82-50 3040/2-06975 2 3205 2720 3002 3005 2295 3150 2890 72 2740 20 137 -0.50 272 495 3508 17321 14406 755 1785 1419
82-50 3520/2-06980 3 3685 3200 3482 3485 2657 3630 3370 78 3220 20 161 -0.50 272 495 4060 20056 16674 798 1888 1501
82-50 3839/2-06985 4 4005 3520 3801 3804 2905 3950 3690 84 3540 20 177 -0.50 272 495 4427 21873 18180 823 1948 1547

96 97
Series 532, 540
Series overview - Roller / Ball Combination Slewing Rings

Operating conditions

Permissible temperature range -25C to +70C


Maximum permissible rotational speed nperm = 20000 / DL
(DL = raceway diameter)
Only compressive load
Only vertical rotating axis
Bolt grade 10.9

Typical applications
Stacker reclaimers and other equipment for bulk materials handling,
turntables.

Characteristics

High axial load capacity


Long service life if mainly axial loads
High rigidity
Good running precision

Permissible tooth force for the individual sizes

Limiting load diagrams, series 532, 540


Please refer to the explanations in the Technical Information section of the catalog.

Static load ratings for the individual sizes

98 99
Series 532 standard design

External toothed Limiting load diagram for compressive loads Series 532

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
51-32 3550/2-06900 1 3772.8 3358 3509 3597 2028 3638 3418 76 3712 16 232 +1.00 165 294 1083 32008 5799 319 4948 606
51-32 3750/2-06905 2 3980.8 3558 3709 3797 2186 3846 3618 80 3936 16 246 +0.50 165 294 1145 33811 6130 325 5089 618
51-32 4000/2-06910 3 4220.8 3808 3959 4047 2278 4086 3868 84 4176 16 261 +0.50 165 294 1223 36065 6544 333 5273 633
51-32 4250/2-06915 4 4476.8 4058 4209 4297 2455 4342 4118 90 4416 16 276 +1.00 165 294 1300 38320 6957 341 5439 648

100 101
Series 540 standard design

External toothed Limiting load diagram for compressive loads Reihe 540

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
51-40 4250/2-06920 1 4536 4026 4200 4306 3469 4362 4098 68 4480 20 224 +0.50 253 450 1403 44728 7507 442 7415 840
51-40 4500/2-06925 2 4776 4276 4450 4556 3673 4612 4348 72 4720 20 236 +0.50 253 450 1486 47360 7955 451 7649 858
51-40 4750/2-06930 3 5016 4526 4700 4806 3796 4852 4598 76 4960 20 248 +0.50 253 450 1570 49990 8402 460 7877 876
51-40 4900/2-06935 4 5176 4676 4850 4956 4000 5012 4748 80 5120 20 256 +0.50 253 450 1620 51569 8670 466 8007 886

102 103
Series 320, 325, 332, 340, 350
Series overview - Triple Row Roller Slewing Rings

Operating conditions

Permissible temperature range -25C to +70C


Maximum permissible rotational speed nperm = 20000 / DL
(DL = raceway diameter)
Compressive load
Bolt grade 10.9

Typical applications
Heavy harbour cranes, shipboard cranes, ladle turrets and grab cranes, radar antennas, wind energy
turbine main bearings, tunnel boring machines and loading buoys (oil, gas swivels), machine tools
(in general where the application requires high duty cycles).

Characteristics

High precision
Highest axial load capacity
Especially high tilting moment load capacity
High rigidity
Long service life
Permissible tooth force for the individual sizes

Limiting load diagrams, series 320, 325, 332, 340, 350


Please refer to the explanations in the Technical Information section of the catalog.

Static load ratings for the individual sizes

104 105
Series 320 standard design
External toothed Limiting
Limiting load
load diagram
diagram for
for compressive loads Series
compressive loads Reihe 320

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
31-20 1250/2-06700 1 1461.6 1103 1282 1280 542 1355 1155 36 1428 12 119 +0.50 107 187 587 7383 4423 395 1371 999
31-20 1400/2-06710 2 1635.2 1253 1432 1430 646 1505 1305 36 1596 14 114 +0.50 136 236 660 8269 4956 419 1462 1076
31-20 1600/2-06720 3 1831.2 1453 1632 1630 731 1705 1505 40 1792 14 128 +0.50 136 236 757 9450 5666 451 1580 1156
31-20 1800/2-06730 4 2044.8 1653 1832 1830 844 1905 1705 46 2000 16 125 +0.50 163 285 854 10631 6376 481 1668 1224
31-20 2000/2-06740 5 2236.8 1853 2032 2030 912 2105 1905 54 2192 16 137 +0.50 163 285 951 11812 7086 509 1768 1299

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
32-20 1250/2-06750 1 1397 1032 1219 1218 539 1345 1145 36 1044 12 87 -0.50 117 214 625 7383 4452 407 1371 1005
32-20 1400/2-06760 2 1547 1162 1369 1368 630 1495 1295 36 1176 14 84 -0.50 146 269 698 8269 4984 432 1462 1075
32-20 1600/2-06770 3 1747 1372 1569 1568 705 1695 1495 40 1386 14 99 -0.50 146 269 795 9450 5694 463 1580 1162
32-20 1800/2-06780 4 1947 1552 1769 1768 829 1895 1695 46 1568 16 98 -0.50 175 319 892 10631 6404 492 1668 1236
32-20 2000/2-06790 5 2147 1760 1969 1968 902 2095 1895 54 1776 16 111 -0.50 175 319 989 11812 7114 519 1768 1307

106 107
Series 325 standard design
External toothed Limiting load diagram for compressive loads Series 325

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
31-25 1800/2-06800 1 2076.8 1619 1826 1836 1126 1925 1685 36 2032 16 127 +0.50 172 306 1348 13006 7609 701 2265 1664
31-25 2000/2-06810 2 2268.8 1819 2026 2036 1216 2125 1885 44 2224 16 139 +0.50 172 306 1502 14451 8457 743 2417 1769
31-25 2240/2-06820 3 2516.4 2059 2266 2276 1378 2366 2125 48 2466 18 137 +0.50 202 358 1687 16185 9475 790 2559 1889
31-25 2500/2-06830 4 2786.4 2319 2526 2536 1567 2625 2385 54 2736 18 152 +0.50 202 358 1887 18064 10577 838 2723 1983
31-25 2800/2-06840 5 3096.0 2619 2826 2836 1785 2925 2685 60 3040 20 152 +0.50 232 407 2118 20232 11850 890 2908 2132

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
32-25 1800/2-06850 1 1981 1520 1763 1774 1101 1915 1675 36 1536 16 96 -0.50 185 342 1424 13006 7660 722 2265 1667
32-25 2000/2-06860 2 2181 1728 1963 1974 1202 2115 1875 44 1744 16 109 -0.50 185 342 1577 14451 8508 762 2417 1773
32-25 2240/2-06870 3 2421 1944 2203 2214 1406 2355 2115 48 1962 18 109 -0.50 217 394 1763 16185 9526 808 2559 1886
32-25 2500/2-06880 4 2681 2214 2463 2474 1545 2615 2375 54 2232 18 124 -0.50 217 394 1963 18064 10628 855 2723 1996
32-25 2800/2-06890 5 2981 2500 2763 2774 1767 2915 2675 60 2520 20 126 -0.50 248 449 2194 20232 11901 907 2908 2121

108 109
Series 332 standard design
External toothed Limiting load diagram for compressive loads Series 332

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
31-32 2240/2-07300 1 2552.4 2022 2270 2281 1975 2395 2100 40 2502 18 139 +0.50 228 401 1862 19352 11565 988 3600 2561
31-32 2500/2-07310 2 2822.4 2282 2530 2541 2260 2655 2360 44 2772 18 154 +0.50 228 401 2085 21598 12912 1049 3837 2717
31-32 2800/2-07320 3 3136.0 2582 2830 2841 2576 2955 2660 48 3080 20 154 +0.50 260 465 2341 24190 14468 1114 4105 2879
31-32 3150/2-07330 4 3476.0 2932 3180 3191 2828 3305 3010 56 3420 20 171 +0.50 260 465 2640 27214 16282 1187 4368 3096
31-32 3550/2-07340 5 3889.6 3332 3580 3591 3249 3705 3410 66 3828 22 174 +0.50 295 525 2982 30670 18355 1266 4603 3277
31-32 4000/2-07350 6 4351.6 3782 4030 4041 3752 4155 3860 72 4290 22 195 +0.50 295 525 3367 34558 20688 1351 4955 3486

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
32-32 2240/2-07360 1 2458 1908 2199 2210 2010 2380 2085 40 1926 18 107 -0.50 240 445 1966 19352 11658 1017 3600 2583
32-32 2500/2-07370 2 2718 2178 2459 2470 2210 2640 2345 44 2196 18 122 -0.50 240 445 2189 21598 13006 1076 3837 2720
32-32 2800/2-07380 3 3018 2460 2759 2770 2542 2940 2645 48 2480 20 124 -0.50 278 508 2445 24190 14561 1141 4105 2906
32-32 3150/2-07390 4 3368 2820 3109 3120 2807 3290 2995 56 2840 20 142 -0.50 278 508 2744 27214 16375 1212 4368 3092
32-32 3550/2-07400 5 3768 3190 3509 3520 3302 3690 3395 66 3212 22 146 -0.50 305 559 3089 30670 18449 1291 4603 3273
32-32 4000/2-07410 6 4218 3652 3959 3970 3664 4140 3845 72 3674 22 167 -0.50 305 559 3471 34558 20781 1372 4955 3509

110 111
Series 340 standard design
External toothed Limiting load diagram for compressive loads Series 340

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
31-40 2800/2-07420 1 3136.0 2562 2837 2850 3267 2965 2640 48 3080 20 154 +0.50 296 525 2334 27973 15174 1113 5534 4066
31-40 3150/2-07430 2 3515.6 2912 3187 3200 3812 3315 2990 56 3454 22 157 +0.50 338 605 2633 31469 17077 1186 5834 4344
31-40 3550/2-07440 3 3911.6 3312 3587 3600 4255 3715 3390 66 3850 22 175 +0.50 338 605 2975 35465 19251 1265 6268 4605
31-40 4000/2-07450 4 4363.2 3762 4037 4050 4805 4165 3840 72 4296 24 179 +0.50 380 685 3360 39961 21696 1348 6658 4945
31-40 4500/2-07460 5 4867.2 4262 4537 4550 5410 4665 4340 84 4800 24 200 +0.50 380 685 3787 44956 24414 1437 7122 5275

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
32-40 2800/2-07470 1 3038 2460 2750 2763 3213 2960 2635 48 2480 20 124 -0.50 314 577 2452 27973 15438 1143 5534 4061
32-40 3150/2-07480 2 3388 2794 3100 3113 3683 3310 2985 56 2816 22 128 -0.50 357 658 2751 31469 17362 1214 5834 4365
32-40 3550/2-07490 3 3788 3190 3500 3513 4171 3710 3385 66 3212 22 146 -0.50 357 658 3093 35465 19561 1292 6268 4601
32-40 4000/2-07500 4 4238 3624 3950 3963 4810 4160 3835 72 3648 24 152 -0.50 398 740 3478 39961 21783 1373 6658 4976
32-40 4500/2-07510 5 4738 4128 4450 4463 5367 4660 4335 84 4152 24 173 -0.50 398 740 3905 44956 24501 1461 7122 5270

112 113
Series 350 standard design
External toothed Limiting load diagram for compressive loads Series 350

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings

Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static
Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
31-50 3150/2-07520 1 3571.2 2885 3196 3210 5298 3350 2975 48 3504 24 146 +0.50 420 760 3894 36813 19631 1702 7913 5838
31-50 3550/2-07530 2 3955.2 3285 3596 3610 5830 3750 3375 54 3888 24 162 +0.50 420 760 4402 41488 22131 1815 8409 6272
31-50 4000/2-07540 3 4411.2 3735 4046 4060 6578 4200 3825 60 4344 24 181 +0.50 420 760 4974 46747 24945 1934 9018 6662
31-50 4500/2-07550 4 4915.2 4235 4546 4560 7456 4700 4325 68 4848 24 202 +0.50 420 760 5609 52590 28070 2062 9632 7088
31-50 4750/2-07555 5 5179.2 4485 4796 4810 7870 4950 4575 76 5112 24 213 +0.50 420 760 5927 55512 29633 2124 9850 7293

Internal toothed

Dimensions and weight Mounting holes Gearing and tooth forces Load ratings
Permissible tooth force

Maximum permissible
Pitch circle diameter,

Pitch circle diameter,

Pitch circle diameter


Drawing number

modification coeff.
Outside diameter,

Outside diameter,

Number of holes

Number of teeth
Inside diameter,

Inside diameter,

per pitch circle

Addendum

tooth force
outer ring

outer ring

outer ring
inner ring

inner ring

inner ring
Position

Dynamic
Module
Weight

Static

Da di Di da G La Li n do m z2 x2 fz norm fz max Co rad Co ax T Co ax H C rad C ax T C ax H


[mm] [mm] [mm] [mm] [kg] [mm] [mm] [-] [mm] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
32-50 3150/2-07560 1 3415 2736 3090 3104 5128 3325 2950 48 2760 24 115 -0.50 440 820 4110 36813 19756 1750 7913 5830
32-50 3550/2-07570 2 3815 3120 3490 3504 5916 3725 3350 54 3144 24 131 -0.50 440 820 4618 41488 22256 1861 8409 6264
32-50 4000/2-07580 3 4265 3576 3940 3954 6623 4175 3800 60 3600 24 150 -0.50 440 820 5190 46745 25070 1980 9018 6654
32-50 4500/2-07590 4 4765 4080 4440 4454 7427 4675 4300 68 4104 24 171 -0.50 440 820 5825 52590 28195 2105 9632 7118
32-50 4750/2-07595 5 5015 4320 4690 4704 7840 4925 4550 76 4344 24 181 -0.50 440 820 6143 55512 29758 2164 9850 7322

114 115
Other Standard Ball Slewing Rings

Overview

Limiting load diagrams for other standard types


Please refer to the explanations in the Technical Information section of the catalog.

Limiting load diagrams for standard types, untoothed

Limiting load diagrams for standard types, external toothed

Permissible tooth force for the individual sizes

Limiting load diagrams for standard types, internal toothed

Operating conditions Characteristics

Permissible temperature range -25C to +70C Robust design


Maximum permissible rotational speed nperm = 40000 / DL For high levels of vibration
(DL = raceway diameter) Cost-optimized design
Compressive load Medium precision
Bolt grade 10.9 Wide range of diameters

Typical applications
Turntables, slewing mechanisms, bogies, light to medium-sized cranes, construction machinery, wind
energy turbines and winders (applications such as double axial Slewing Rings with increased radial load).

116 117
Other Standard Ball Slewing Rings - untoothed

Size 10-12 0120/0-03659 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static
G na ni Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
4 6 6 29 78 43 50 C45N - 2 x AM8x1 0 - 0.03 0 - 0.03

Size 10-16 0179/0-06672 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
7 12 12 78 209 89 103 C45N - 2 x AM8x1 0.04 - 0.14 0.07 - 0.23

Size 10-20 0220/0-03351 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance


Axial tilting clearance
Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
16 10 10 181 485 177 205 C45N - 2 x AM6 0.05 - 0.20 0.10 - 0.40

118 119
Other Standard Ball Slewing Rings - untoothed

Size 10-12 0222/0-02710 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static
G na ni Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
11 12 12 143 253 70 82 C45N - 2 x AM6 0 - 0.05 0 - 0.10

Size 10-20 0260/0-02448 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
15 16 16 151 403 143 166 C45N - 2 x AM6 0.05 - 0.20 0.08 - 0.33

Size 10-22 0308/0-00270 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance


Axial tilting clearance
Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
28 24 28 185 494 172 200 C45N - 4 x AM8x1 0 - 0.10 0 - 0.15

120 121
Other Standard Ball Slewing Rings - untoothed

Size 10-16 0325/0-03997 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static
G na ni Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
12 24 24 142 380 114 132 C45N - 2 x AM6 0.04 - 0.14 0.07 - 0.23

Size 10-25 0371/0-00181 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
41 16 16 392 1050 298 346 C45N - 2x AM10x1 0.06 - 0.25 0.10 - 0.41

Size 10-25 0380/0-03908 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance


Axial tilting clearance
Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
43 16 16 282 755 226 263 C45N - 2x AM10x1 0.06 - 0.25 0.11 - 0.41

122 123
Other Standard Ball Slewing Rings - untoothed

Size 10-22 0404/0-04475 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static
G na ni Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
22 29* 30 242 649 193 225 C45N - 2 x AM8x1 0.05 - 0.15 0.05 - 0.15

* Spaced for 30

Size 10-32 0474/0-03498 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
68 24 24 381 1019 319 371 C45N - 6 x AM8x1 0.07 - 0.30 0.12 - 0.48

Size 10-32 0550/0-05642 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance


Axial tilting clearance
Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
75 24 24 514 1377 339 394 42CoMo4V - 4x AM10x1 0.08 - 0.32 0.13 - 0.52

124 125
Other Standard Ball Slewing Rings - untoothed

Size 10-32 0574/0-05823 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
77 36 35* 537 1437 344 400 C45N - 2 x AM10x1 0 - 0.10 0 - 0.15

* Spaced for 36

Size 10-32 0675/0-05584 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance


Axial tilting clearance
Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
131 36 35* 899 2406 486 565 42CoMo4V - je 4x AM8x1 0 - 0.10 0 - 0.20

* Spaced for 36

126 127
Other Standard Ball Slewing Rings - untoothed

Size 10-32 0680/0-00928 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance

Axial tilting clearance


Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
120 24 24 636 1702 365 425 C45N - 8 x AM10x1 0.08 - 0.32 0.13 - 0.52

Size 10-32 0780/0-00367 Limiting load diagram for compressive loads

Mounting holes Load ratings Clearance


Axial tilting clearance
Number of holes,

Number of holes,

inner / outer ring

Radial clearance
Transport holes

grease nipple
DIN 71412
dynamisch

Taper type
outer ring

inner ring

Material,
Weight

Static

G na ni Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [kN] [kN] [kN] [kN] [-] [mm] [mm]
125 32 32 730 1952 385 448 C45N - 4 x AM10x1 0.10 - 0.30 0.10 - 0.50

128 129
Other Standard Ball Slewing Rings - external toothed

Size 11-16 0188/2-01707 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
7,5 16 15* 4 62 0.50 8 16 143 384 121 141 C45N - 2 x 10 0.03 - 0.10 0.05 - 0.20
42CrMo4V

* Spaced for 16

Size 11-16 0235/1-01933 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
13 12 12 4 78 - 5.8 12 143 384 132 153 C45N - 2 x AM8x1 0.04 - 0.16 0.07 - 0.26

Size 11-25 0309/1-03312 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
30 24 23* 5 80 - 10.6 20.3 229 614 209 242 C45N - 4 x AM8x1 0.06 - 0.25 0.10 - 0.41

* Spaced for 24

130 131
Other Standard Ball Slewing Rings - external toothed

Size 11-25 0537/1-05677 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
91 30 29* 6 112 0.50 24 44 568 1519 344 400 42CrMo4N 3 x M16 2 x 8 0.06 - 0.25 0.11 - 0.41

* Spaced for 30

Size 11-22 0635/2-03924 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
79 40 40 6 122 - 23 43 536 1434 305 355 42CrMo4V - 4 x AM10x1 0 - 0.10 0 - 0.30

Size 11-32 0675/2-03771 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
137 36 35* 10 81 0.50 68 117 899 2406 486 565 42CrMo4C - je 0 - 0.10 0 - 0.21
42CrMo4V 3x AM10x1

* Spaced for 36

132 133
Other Standard Ball Slewing Rings - external toothed

Size 11-25 0693/2-04976 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
132 42 42 10 81 0.50 64 111 514 1376 285 332 42CrMo4V 3 x M16 4 x R1/4 0.06 - 0.25 0.11 - 0.41

Size 11-25 0716/1-04864 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
96 40 40 6 138 0.50 14.7 27.8 531 1422 287 334 C45N 3 x M16 4 x AM10x1 0 - 0.10 0 - 0.30

Size 11-32 0823/2-02613 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
177 36 35* 10 94 1.10 65 112 770 2060 393 458 42CrMo4V - 4 x AM10x1 0.08 - 0.32 0.13 - 0.52

* Spaced for 36

134 135
Other Standard Ball Slewing Rings - external toothed

Size 11-32 0957/2-05549 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
324 42 41* 12 91 1.07 108 187 1459 3906 553 644 42CrMo4V 3 x M16 3 x R1/4 0.08 - 0.32 0.13 - 0.52

* Spaced for 42

Size 41-20 0969/2-05532 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
213 30 30 8 131 1.07 45 80 798 2135 231 363 42CrMo4V - je 0 - 0.10 0 - 0.20
2 x AM10x1

Size 41-32 1160/2-00991 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
429 40 40 10 132 0.50 73 131 1545 4134 594 692 42CrMo4C - je 0 - 0.10 0 - 0.25
42CrMo4V 4x AM10x1

136 137
138
G
G
G
Weight Weight Weight

[kg]
[kg]
[kg]

261
479
324
362
Number of holes, Number of holes, Number
Number ofof holes,
holes,

[-]
[-]
[-]

na
na
na

36
40
42
60

* Spaced for 60
outer ring outer ring ring
outer ring
outer

holes,
Mounting holes

Mounting holes
Mounting holes
Number of holes, Number of holes, Number of
Number of holes,

ni
ni
ni

[-]
[-]
[-]

36
40
41*
59*
inner ring inner ring ring
inner ring
inner
Other Standard

Number of holes,

8
m
m
m

14
12
Module Module Module

Size 11-25 1845/1-03705


Size 11-32 1600/1-02300
Size 11-40 1298/2-00767

[mm]
[mm]
[mm]
inner ring
Number of holes,

[-]
[-]
[-]

z2
z2
z2

91
Number of teeth Number of teeth Number of teeth

244
126
120
inner ring
Addentum Addentum Number
Addentum of holes,

[-]
[-]
[-]

x2
x2
x2

0.00
0.50
1.07
0.90
modification coeff. modification coeff. modification
inner ring coeff.
Number of holes,

27
85
Permissible tooth force Permissible tooth force Permissible tooth force
108
107

[kN]
[kN]
[kN]
Gearing and tooth forces

Gearing and tooth forces


Gearing and tooth forces

fz norm
fz norm
fz norm

inner ring
Maximum permissible Maximum permissible Number holes,
Maximumofpermissible

48
145
187
185

[kN]
[kN]
[kN]

fz max
fz max
fz max

tooth force tooth force tooth force


inner ring

[kN]
[kN]

Co rad
Co rad

1951
1497
1459
1676

Static Static Static

[kN]
[kN]
[kN] [kN]

Co ax
Co ax

5220
4005
3906
4485
Co rad CCooaxaxH
Load ratings

543
503
553
586

Load ratings
Load ratings

[kN]
C rad
[kN]
C rad
[kN]
C rad

dynamisch dynamisch dynamisch


Ball Slewing Rings

C ax
C ax

633
586
644

[kN]
[kN]
[kN]
CCaxaxH

Material, Material, Werkstoff


Material,

C45N
C45N
inner / outer ring inner / outer ring inner
Innen-/ outer ring
/ Aussenring

-
-
-

T
T
T

[-]
[-]
[-]

Transport holes Transport holes Transport holes


682 42CrMo4V 3 x M16

Taper type Taper type Taper


Taper type
type grease
nipple

X
X
X

grease nipple grease nipple grease nipple


DIN 71412 DIN 71412 DIN

6 x AM10x1
43x xAM10x1

DIN 71412
71412
R1/4 0.08
- external toothed

Radial clearance Radial clearance Radial clearance

SRad
SRad
SRad

[mm]
[mm]
[mm]

0 - 0.10
0.10 - 0.32
Clearance

Clearance
Clearance
0.30 0.13

Axial tilting clearance Axial tilting clearance Axial tilting clearance

Skipp
Skipp
Skipp

[mm]
[mm]
[mm]

0.10 - 0.20
8 x AM10x1 0.08 - 0.32 0.13 - 0.52
0.17 - 0.52
0.54

Limiting load diagram for compressive loads


Limiting load diagram for compressive loads
Limiting load diagram for compressive loads

139
140
G
G
G

24
24
12
Weight Weight Weight

[kg]
[kg]
[kg]
324
Number of holes, Number of holes, Number
Number ofof holes,
holes,

[-]
[-]
[-]

na
na
na

16
16
42
20
outer ring outer ring ring
outer ring
outer

holes,
Mounting holes

Mounting holes
Mounting holes
Number of holes, Number of holes, Number of
Number of holes,

ni
ni
ni

[-]
[-]
[-]

16
16
20
41*
inner ring inner ring ring
inner ring
inner
Other Standard

Number of holes,

4
4
4

m
m
m

12
Module Module Module

Size 12-16 0420/1-00728


Size 12-16 0344/2-01873
Size 12-16 0288/1-00306

[mm]
[mm]
[mm]
inner ring
Number of holes,

[-]
[-]
[-]

z2
z2
z2

85
66
91
56
Number of teeth Number of teeth Number of teeth
inner ring
Addentum Addentum Number
Addentum of holes,

-
-
-

[-]
[-]
[-]

x2
x2
x2

1.07
modification coeff. modification coeff. modification
inner ring coeff.
Number of holes,

4.2
4.1
Permissible tooth force Permissible tooth force Permissible tooth force
108

[kN]
[kN]
[kN]
Gearing and tooth forces

Gearing and tooth forces


Gearing and tooth forces

fz norm
fz norm
fz norm

inner ring
Maximum permissible Maximum permissible Number holes,
Maximumofpermissible
187

[kN]
[kN]
[kN]

11.7
16.5
11.2

fz max
fz max
fz max

tooth force tooth force tooth force


inner ring

184
262
126

[kN]
[kN]

Co rad
Co rad
1459

Static Static Static

491
702
337

[kN]
[kN]
[kN] [kN]

Co ax
Co ax
3906
Co rad CCooaxaxH
Load ratings

124
154
553
108

Load ratings
Load ratings

[kN]
C rad
[kN]
C rad
[kN]
C rad

dynamisch dynamisch dynamisch


Ball Slewing Rings

C ax
C ax

145
644

[kN]
[kN]
[kN]
CCaxaxH

Material, Material, Werkstoff


Material,

C45N
C45N
inner / outer ring inner / outer ring inner
Innen-/ outer ring
/ Aussenring

179 42CrMo4V
126 42CrMo4V

-
-
-

T
T
T

[-]
[-]
[-]

Transport holes Transport holes Transport holes


C45N 3 x M16

Taper type Taper type Taper


Taper type
type grease
nipple

X
X
X

grease nipple grease nipple grease nipple


R1/4

DIN 71412 DIN 71412 DIN

2 x AM8x1
2 x AM8x1
23xxAM8x1

DIN 71412
71412
- internal toothed

0.08

Radial clearance Radial clearance Radial clearance

SRad
SRad
SRad

[mm]
[mm]
[mm]
0 - 0.10
Clearance

Clearance
Clearance
- 0.32 0.13

Axial tilting clearance Axial tilting clearance Axial tilting clearance

Skipp
Skipp
Skipp

[mm]
[mm]
[mm]
0 - 0.20

0 - leichte 0 - leichte

0.04 - 0.16 0.07 - 0.26


- 0.52

Vorspannung Vorspannung

Limiting load diagram for compressive loads


Limiting load diagram for compressive loads
Limiting load diagram for compressive loads

141
Other Standard Ball Slewing Rings - internal toothed

Size 12-22 0782/2-01218 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
103 24 24 8 82 -1.00 30.8 55 469 1255 248 289 42CrMo4V - 4 x AM10x1 0 - 0.10 0 - 0.25
C45N

Size 12-22 0850/2-01501 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
100 24 24 6 124 -0.50 21 40 614 1642 256 298 42CrMo4V - 4 x AM10x1 0 - 0.10 0 - 0.25
C45N

Size 12-25 0889/2-04951 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
126 36 36 8 100 - 41 74 660 176 312 363 42CrMo4V 4 x M10 4 x AM10x1 0.06 - 0.25 0.11 - 0.41

142 143
Other Standard Ball Slewing Rings - internal toothed

Size 12-32 1128/2-04945 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
280 40 40 12 77 -1.25 61 100 1055 2823 442 515 42CrMo4V 2 x M20 4 x AM10x1 0 - 0.30 0 - 0.60

Size 12-22 1131/2-01601 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
127 40 40 7 146 -0.50 28.6 52 678 1815 284 331 42CrMo4V - 4 x AM10x1 0.05 - 0.22 0.10 - 0.40
C45N

Size 12-32 1159/2-01512 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
269 42 42 10 100 - 64 112 1084 2901 447 521 42CrMo4V - 4 x AM10x1 0.08 - 0.32 0.13 - 0.52
C45N

144 145
Other Standard Ball Slewing Rings - internal toothed

Size 12-32 1384/2-04719 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance

Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static
G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp
[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
432 48 48 14 85 -0.50 109 183 1295 3464 477 556 42CrMo4V 3 x M16 6x AM10x1 0.08 - 0.32 0.13 - 0.52

Size 12-32 1400/2-04953 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
289 60 60 12 103 -0.50 81 138 1865 4990 635 740 42CRmo4V 3 x M16 15 x AM10x1 0.06 - 0.25 0.11 - 0.41

Size 12-32 1582/2-04505 Limiting load diagram for compressive loads

Mounting holes Gearing and tooth forces Load ratings Clearance


Permissible tooth force

Maximum permissible

Axial tilting clearance


modification coeff.
Number of holes,

Number of holes,

inner / outer ring


Number of teeth

Radial clearance
Transport holes

grease nipple
DIN 71412
tooth force
Addentum

dynamisch

Taper type
outer ring

inner ring

Material,
Module
Weight

Static

G na ni m z2 x2 fz norm fz max Co rad Co ax C rad C ax T X SRad Skipp


[kg] [-] [-] [mm] [-] [-] [kN] [kN] [kN] [kN] [kN] [kN] [-] [mm] [mm]
469 60 60 16 86 -.050 122 204 2413 6456 667 778 42CRmo4V 3 x M16 5 x AM10x1 0.08 - 0.32 0.13 - 0.52

146 147
Application Data Sheet Slewing Rings

Please fill in the form and return to: IMO GmbH & Co. KG - Imostrae 1 - 91350 Gremsdorf, Germany
Fax: +49 9193 6395-4145
4. Gearing (If possible, please include a drawing of the pinion.)
Which ring is geared internal external none
Email: [email protected]
Slewing ring Drive pinion Number of drives / pinions
1. Contact / Customer
Module m mm
Company Home page
Number of teeth z
Contact person Email
Tooth width b mm mm Center distance
Street Phone
Profile correction factor x mm
Country Fax
Head height adjustment factor k
ZIP/City
Helix angle beta

2. Application description (please include a drawing)


Are detailed specifications available? (Please countercheck them with this sheet). Please briefly describe the application. 5. Loads / Load type
Supported load Hanging axial load Mixed axial load

Inner Outer
ring ring
Tensile force on
Axial load relieves screws on Axial load adds additional stress to Compressive force on
the inner and outer ring screws on the inner and outer ring
New design Yes No > Existing type/drawing:

Load-increasing application factors Operating load during the rotary motion Load during downtime of the bearing
What must be given special consideration? What problems arose? Application-specific requirements? must be included in the loads.
Normal Maximum Maximum Extreme load
Axial load Fax kN
Radial load Frad kN

Operating temperature Minimum C Normal C Maximum C Tilting moment Mk kNm

Survival temperature (outside of operation) Minimum C Maximum C Gear circumferential force fz kN

Are special seals required? No Yes against Torque (slewing ring) Md kNm
Are inspection reports required? No Yes which (e.g. 3.1 according to EN 10204) Duty percentage ED %
Are acceptances required? No Yes which (e.g. 3.2 according to EN 10204)
Continuous rotation without interruption
Standards/certifying authorities to be considered? No Yes which (e.g. Lloyds, ISO, DNV, GL, etc.)
Rotational speed (slewing ring) n rpm
Anti-corrosion agent desired? No Yes which (e.g. galvanization, paint, etc.)
Rotational speed max. (slewing ring) n max rpm
Position of rotation axis: Vertical Horizontal Changing Degrees middle position of rotation axis Operating hours per year h/a

middle position +/- b Degrees angle range


of rotation axis or: Rotary motion with interruption cycle description:
Shocks or vibrations
Slewing angle Degrees No Yes
Angular acceleration ab rad/s2
Slewing time tS1 Sec. Direction of rotation
Interruption time tU1 Sec. Same Changning
Number of cycles per operating hour 1/h
3. Dimensions of the slewing ring da Outside min/max Equipment utilization
Operating hours per year h/a a
Specify minimum and maximum values. Li Pitch circle min/max time in years
Please enter fixed dimensions under min. ni Hole number x Dbi Hole
Please include drawings, if available.
di Inside min/max 6. Issue of offer
Foreseeable annual requirement Units/year Desired delivery time Weeks Desired offer date
H Height min/max

H Height DV min/max

Planned lot size Unis/delivery Customer price proposal Euro/unit


Ha Height min/max

7. Comments

Di Inside min/max

na Hole number x Dba Hole

Li Pitch circle min/max

Da Outside min/max
Date Name of the editor

148 149
Products listed according to drawing reference number

Drawing number Page Drawing number Page Drawing number Page Drawing number Page Drawing number Page Drawing number Page

10-12 0120/0-03659 118 10-32 0675/0-05584 126 11-32 0957/2-05549 136 12-50 2800/2-06540 90 32-50 4000/2-07580 114 90-32 1155/0-06035 76
10-12 0222/0-02710 120 10-32 0680/0-00928 128 11-32 1600/1-02300 138 31-20 1250/2-06700 106 32-50 4500/2-07590 114 90-32 1255/0-06045 76
10-16 0100/0-08000 80 10-32 0780/0-00367 128 11-40 1298/2-00767 138 31-20 1400/2-06710 106 32-50 4750/2-07595 114 90-32 1355/0-06055 76
10-16 0100/0-08003 82 11-16 0100/1-08100 80 11-50 1900/2-06400 90 31-20 1600/2-06720 106 41-20 0969/2-05532 136 90-32 1455/0-06065 76
10-16 0179/0-06672 118 11-16 0100/1-08103 82 11-50 2130/2-06410 90 31-20 1800/2-06730 106 41-32 1160/2-00991 136 91-20 0311/1-07102 72
10-16 0200/0-08010 80 11-16 0188/2-01707 130 11-50 2355/2-06420 90 31-20 2000/2-06740 106 51-32 3550/2-06900 100 91-20 0311/1-07103 74
10-16 0200/0-08013 82 11-16 0200/1-08110 80 11-50 2645/2-06430 90 31-25 1800/2-06800 108 51-32 3750/2-06905 100 91-20 0411/1-07112 72
10-16 0300/0-08020 80 11-16 0200/1-08113 82 12-16 0288/1-00306 140 31-25 2000/2-06810 108 51-32 4000/2-06910 100 91-20 0411/1-07113 74
10-16 0300/0-08023 82 11-16 0235/1-01933 130 12-16 0344/2-01873 140 31-25 2240/2-06820 108 51-32 4250/2-06915 100 91-20 0541/1-07122 72
10-16 0325/0-03997 122 11-16 0300/1-08120 80 12-16 0420/1-00728 140 31-25 2500/2-06830 108 51-40 4250/2-06920 102 91-20 0541/1-07123 74
10-16 0400/0-08030 80 11-16 0300/1-08123 82 12-20 0311/1-02202 84 31-25 2800/2-06840 108 51-40 4500/2-06925 102 91-20 0641/1-07132 72
10-16 0400/0-08033 82 11-16 0400/1-08130 80 12-20 0311/1-02203 86 31-32 2240/2-07300 110 51-40 4750/2-06930 102 91-20 0641/1-07133 74
10-16 0500/0-08040 80 11-16 0400/1-08133 82 12-20 0411/1-02212 84 31-32 2500/2-07310 110 51-40 4900/2-06935 102 91-20 0741/1-07142 72
10-16 0500/0-08043 82 11-16 0500/1-08140 80 12-20 0411/1-02213 86 31-32 2800/2-07320 110 81-40 2240/2-07600 94 91-20 0741/1-07143 74
10-20 0220/0-03351 118 11-16 0500/1-08143 82 12-20 0541/1-02222 84 31-32 3150/2-07330 110 81-40 2619/2-07605 94 91-20 0841/1-07152 72
10-20 0260/0-02448 120 11-20 0311/1-02102 84 12-20 0541/1-02223 86 31-32 3550/2-07340 110 81-40 2795/2-07610 94 91-20 0841/1-07153 74
10-20 0311/0-02002 84 11-20 0311/1-02103 86 12-20 0641/1-02232 84 31-32 4000/2-07350 110 81-40 2915/2-07615 94 91-20 0941/1-07162 72
10-20 0311/0-02003 86 11-20 0411/1-02112 84 12-20 0641/1-02233 86 31-40 2800/2-07420 112 81-40 3150/2-07620 94 91-20 0941/1-07163 74
10-20 0411/0-02012 84 11-20 0411/1-02113 86 12-20 0741/1-02242 84 31-40 3150/2-07430 112 81-50 2987/2-06940 96 91-20 1091/1-07172 72
10-20 0411/0-02013 86 11-20 0541/1-02122 84 12-20 0741/1-02243 86 31-40 3550/2-07440 112 81-50 3167/2-06945 96 91-20 1091/1-07173 74
10-20 0541/0-02022 84 11-20 0541/1-02123 86 12-20 0841/1-02252 84 31-40 4000/2-07450 112 81-50 3347/2-06950 96 91-32 0955/1-06115 76
10-20 0541/0-02023 86 11-20 0641/1-02132 84 12-20 0841/1-02253 86 31-40 4500/2-07460 112 81-50 3567/2-06955 96 91-32 1055/1-06125 76
10-20 0641/0-02032 84 11-20 0641/1-02133 86 12-20 0941/1-02262 84 31-50 3150/2-07520 114 81-50 3747/2-06960 96 91-32 1155/1-06135 76
10-20 0641/0-02033 86 11-20 0741/1-02142 84 12-20 0941/1-02263 86 31-50 3550/2-07530 114 81-50 4140/2-06965 96 91-32 1255/1-06145 76
10-20 0741/0-02042 84 11-20 0741/1-02143 86 12-20 1091/1-02272 84 31-50 4000/2-07540 114 82-40 2199/2-07625 94 91-32 1355/1-06155 76
10-20 0741/0-02043 86 11-20 0841/1-02152 84 12-20 1091/1-02273 86 31-50 4500/2-07550 114 82-40 2622/2-07630 94 91-32 1455/1-06165 76
10-20 0841/0-02052 84 11-20 0841/1-02153 86 12-22 0782/2-01218 142 31-50 4750/2-07555 114 82-40 2950/2-07635 94 92-20 0311/1-07202 72
10-20 0841/0-02053 86 11-20 0941/1-02162 84 12-22 0850/2-01501 142 32-20 1250/2-06750 106 82-40 3300/2-07640 94 92-20 0311/1-07203 74
10-20 0941/0-02062 84 11-20 0941/1-02163 86 12-22 1131/2-01601 144 32-20 1400/2-06760 106 82-50 2559/2-06970 96 92-20 0411/1-07212 72
10-20 0941/0-02063 86 11-20 1091/1-02172 84 12-25 0455/1-04210 88 32-20 1600/2-06770 106 82-50 3040/2-06975 96 92-20 0411/1-07213 74
10-20 1091/0-02072 84 11-20 1091/1-02173 86 12-25 0555/1-04220 88 32-20 1800/2-06780 106 82-50 3520/2-06980 96 92-20 0541/1-07222 72
10-20 1091/0-02073 86 11-22 0635/2-03924 132 12-25 0655/1-04230 88 32-20 2000/2-06790 106 82-50 3839/2-06985 96 92-20 0541/1-07223 74
10-22 0308/0-00270 120 11-25 0309/1-03312 130 12-25 0755/1-04240 88 32-25 1800/2-06850 108 90-20 0311/0-07002 72 92-20 0641/1-07232 72
10-22 0404/0-04475 124 11-25 0455/1-04110 88 12-25 0855/1-03210 88 32-25 2000/2-06860 108 90-20 0311/0-07003 74 92-20 0641/1-07233 74
10-25 0371/0-00181 122 11-25 0537/1-05677 132 12-25 0889/2-04951 142 32-25 2240/2-06870 108 90-20 0411/0-07012 72 92-20 0741/1-07242 72
10-25 0380/0-03908 122 11-25 0555/1-04120 88 12-25 0955/1-03220 88 32-25 2500/2-06880 108 90-20 0411/0-07013 74 92-20 0741/1-07243 74
10-25 0455/0-04010 88 11-25 0655/1-04130 88 12-25 1055/1-03230 88 32-25 2800/2-06890 108 90-20 0541/0-07022 72 92-20 0841/1-07252 72
10-25 0555/0-04020 88 11-25 0693/2-04976 134 12-25 1155/1-03240 88 32-40 2800/2-07470 112 90-20 0541/0-07023 74 92-20 0841/1-07253 74
10-25 0655/0-04030 88 11-25 0716/1-04864 134 12-25 1255/1-03250 88 32-40 3150/2-07480 112 90-20 0641/0-07032 72 92-20 0941/1-07262 72
10-25 0755/0-04040 88 11-25 0755/1-04140 88 12-25 1355/1-03260 88 32-40 3550/2-07490 112 90-20 0641/0-07033 74 92-20 0941/1-07263 74
10-25 0855/0-03010 88 11-25 0855/1-03110 88 12-25 1455/1-03270 88 32-40 4000/2-07500 112 90-20 0741/0-07042 72 92-20 1091/1-07272 72
10-25 0955/0-03020 88 11-25 0955/1-03120 88 12-32 1128/2-04945 144 32-32 2240/2-07360 110 90-20 0741/0-07043 74 92-20 1091/1-07273 74
10-25 1055/0-03030 88 11-25 1055/1-03130 88 12-32 1159/2-01512 144 32-32 2500/2-07370 110 90-20 0841/0-07052 72 92-32 0955/1-06215 76
10-25 1155/0-03040 88 11-25 1155/1-03140 88 12-32 1384/2-04719 146 32-32 2800/2-07380 110 90-20 0841/0-07053 74 92-32 1055/1-06225 76
10-25 1255/0-03050 88 11-25 1255/1-03150 88 12-32 1400/2-04953 146 32-32 3150/2-07390 110 90-20 0941/0-07062 72 92-32 1155/1-06235 76
10-25 1355/0-03060 88 11-25 1355/1-03160 88 12-32 1582/2-04505 146 32-32 3550/2-07400 110 90-20 0941/0-07063 74 92-32 1255/1-06245 76
10-25 1455/0-03070 88 11-25 1455/1-03170 88 12-50 1800/2-06500 90 32-32 4000/2-07410 110 90-20 1091/0-07072 72 92-32 1355/1-06255 76
10-32 0474/0-03498 124 11-25 1845/1-03705 138 12-50 2000/2-06510 90 32-40 4500/2-07510 112 90-20 1091/0-07073 74 92-32 1455/1-06265 76
10-32 0550/0-05642 124 11-32 0675/2-03771 132 12-50 2240/2-06520 90 32-50 3150/2-07560 114 90-32 0955/0-06015 76
10-32 0574/0-05823 126 11-32 0823/2-02613 134 12-50 2490/2-06530 90 32-50 3550/2-07570 114 90-32 1055/0-06025 76

150 151
Products listed according to drawing reference number

No. Page No. Page No. Page No. Page No. Page No. Page Notes
00181 122 02213 86 05677 132 06900 100 07202 72 07610 94
00270 120 02222 84 05823 126 06905 100 07203 74 07615 94
00306 140 02223 86 06015 76 06910 100 07212 72 07620 94
00367 128 02232 84 06025 76 06915 100 07213 74 07625 94
00728 140 02233 86 06035 76 06920 102 07222 72 07630 94
00767 138 02242 84 06045 76 06925 102 07223 74 07635 94
00928 128 02243 86 06055 76 06930 102 07232 72 07640 94
00991 136 02252 84 06065 76 06935 102 07233 74 08000 80
01218 142 02253 86 06115 76 06940 96 07242 72 08003 82
01501 142 02262 84 06125 76 06945 96 07243 74 08010 80
01512 144 02263 86 06135 76 06950 96 07252 72 08013 82
01601 144 02272 84 06145 76 06955 96 07253 74 08020 80
01707 130 02273 86 06155 76 06960 96 07262 72 08023 82
01873 140 02300 138 06165 76 06965 96 07263 74 08030 80
01933 130 02448 120 06215 76 06970 96 07272 72 08033 82
02002 84 02613 134 06225 76 06975 96 07273 74 08040 80
02003 86 02710 120 06235 76 06980 96 07300 110 08043 82
02012 84 03312 130 06245 76 06985 96 07310 110 08100 80
02013 86 03351 118 06255 76 07002 72 07320 110 08103 82
02022 84 03498 124 06265 76 07003 60 07330 110 08110 80
02023 86 03659 118 06400 90 07012 72 07340 110 08113 82
02032 84 03705 138 06410 90 07013 74 07350 110 08120 80
02033 86 03771 132 06420 90 07022 72 07360 110 08123 82
02042 84 03908 122 06430 90 07023 74 07370 110 08130 80
02043 86 03924 132 06500 90 07032 72 07380 110 08133 82
02052 84 03997 122 06510 90 07033 74 07390 110 08140 80
02053 86 04010 88 06520 90 07042 72 07400 110 08143 82
02062 84 04020 88 06530 90 07043 74 07410 110
02063 86 04030 88 06540 90 07052 72 07420 112
02072 84 04040 88 06672 118 07053 74 07430 112
02073 86 04110 88 06700 106 07062 72 07440 112
02102 84 04120 88 06710 106 07063 74 07450 112
02103 86 04130 88 06720 106 07072 72 07460 112
02112 84 04140 88 06730 106 07073 74 07470 112
02113 86 04210 88 06740 106 07102 72 07480 112
02122 84 04220 88 06750 106 07103 74 07490 112
02123 86 04230 88 06760 106 07112 72 07500 112
02132 84 04240 88 06770 106 07113 74 07510 112
02133 86 04475 124 06780 106 07122 72 07520 114
02142 84 04505 146 06790 106 07123 74 07530 114
02143 86 04719 146 06800 108 07132 72 07540 114
02152 84 04864 134 06810 108 07133 74 07550 114
02153 86 04945 144 06820 108 07142 72 07555 114
02162 84 04951 142 06830 108 07143 74 07560 114
02163 86 04953 146 06840 108 07152 72 07570 114
02172 84 04976 134 06850 108 07153 74 07580 114
02173 86 05532 136 06860 108 07162 72 07590 114
02202 84 05549 136 06870 108 07163 74 07595 114
02203 86 05584 126 06880 108 07172 72 07600 94
02212 84 05642 124 06890 108 07173 74 07605 94

152 153
Notes

154
Inspection of a roller bearing by means
of 3D measurement equipment

For custom configurations we provide


inspection reports according to DIN EN
10204 for material and/or the final slewing
ring. Material certificates document the
chemical composition and the mechanical
characteristics.

Assurance
DIN EN ISO 9001 certified
Quality
During the final testing the
slewing ring diameter and
the surface condition are in-
spected before the bearing
is ready for delivery.
We want you
to be satisfied
Assurance
DIN EN ISO 9001 certified

IMO Slewing Rings have to meet the


highest quality requirements because
they are often used as safety critical
machine components.

Development, design, calculation,


manufacturing and sales are
performed strictly according to
DIN EN ISO 9001 certified procedures.
Quality
IMO Group

References:
References
Plant I, Gremsdorf, Germany in excerpts

Plant II, Gremsdorf, Germany

IMO GmbH & Co. KG


Imostrasse 1
91350 Gremsdorf, Germany
Tel. +49 9193 6395-0
Fax +49 9193 6395-1140
[email protected]

Contact details of our global partners


can be found at www.imo.de
2000/15000111/I/GB/Sep13

The paper used for this


catalog contains 100%
recycling paper and was
awarded the EU Ecolabel.
www.imo.de

You might also like