Product Information

Customer : DATE : 22.Dec.2006

SAMSUNG
SAMSUNG TFT-LCD
TFT-LCD

MODEL
MODEL :: LTA320WT-L06
LTA320WT-L06
Any Modification of Specification is not allowed without SEC's Permission.

NOTE :

APPROVAED BY DATE PREPARED BY DATE

22.Dec.2006 22.Dec.2006

Product Planning Group3, LCD Business

Samsung Electronics Co., LTD.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 1 / 28

 Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (7)

3. Electrical Characteristics ----------------------------------------------------------------------------- (10)

3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Inverter Input & Specification

4. Block Diagram ------------------------------------------------------------------------------------------- (13)

5. Input Terminal Pin Assignment --------------------------------------------------------------------- (14)

5.1 Input Signal & Power
5.2 Inverter Input Pin Configuration
5.3 Inverter Input Power Sequence
5.4 LVDS Interface
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. Interface Timing ---------------------------------------------------------------------------------------- (19)

6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence

7. Outline Dimension -------------------------------------------------------------------------------------- (22)

8. Packing --------------------------------------------------------------------------------------------------- (24)

9. Marking & Others --------------------------------------------------------------------------------------- (25)

10. General Precaution ----------------------------------------------------------------------------------- (26)

10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 2 / 28

* Revision History

Rev.
Date Page Summary
No
Nov
21, 000 all First issued
2006
11,12 Lamp Current Typ / Max 8.0 / 8.5
Dec
12, 001 12 Inverter Input Current Typ 3.9 Æ 4.1
2006
22,23 Outline Dimension Changed

Dec
22, 002 12 Inverter Input Current Typ / Max : 4.1 / - Æ 4.1 / 5.5
2006

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 3 / 28

General Description
Description
LTA320WT-L06 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit. The resolution of a 32.0“ is
1366 x 768 and this model can display up to 16.7 million colors with wide viewing angle of
89° or higher in all directions. This panel is intended to support applications to provide a
excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD
TV, Display terminals for AV application products, and High Definition TV (HDTV).

Features
ƒ RoHS compliance (Pb-free)
ƒ High contrast ratio, high aperture ratio, fast response time
ƒ SPVA(Super Patterned Vertical Align) mode
ƒ Wide viewing angle (±178°)
ƒ High speed response
ƒ WXGA (1366 x 768 pixels) resolution (16:9)
ƒ Low Power consumption
ƒ Direct Type 12 CCFTs(Cold Cathode Fluorescent Tube)
ƒ DE(Data Enable) mode
ƒ LVDS (Low Voltage Differential Signaling) interface (1pixel/clock)

General Information

Items Specification Unit Note

760.0(HTYP) x 450.0(VTYP) ±1.0mm
Module Size mm
48.0(DMAX)
Weight 7,500(Max) g
Pixel Pitch 0.51075(H) x 0.17025(W)*3 mm
Active Display Area 697.6845(H) x 392.256(V) mm
Surface Treatment Haze 44% , Hard-coating (3H)

Display Colors 8 bit - 16.7M colors

Number of Pixels 1366 x 768 pixel

Pixel Arrangement RGB vertical stripe

Display Mode Normally Black

Luminance of White 500 (Typ.) cd/m2

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 4 / 28

1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.5 5.5 V (1)

Storage temperature TSTG -20 60 ℃ (2)

Glass surface Center TOPR 0 50 ℃

temperature (2),(5)
(Operation) T. Uniformity △T - 10 ℃
Shock ( non - operating ) Snop - 50 G (3)
Vibration ( non - operating ) Vnop - 1.5 G (4)

Note (1) Ta= 25 ± 2 °C

(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. Relative Humidity is 90% or less. (Ta > 39 °C)
c. No condensation
(3) 11ms, sine wave, one time for ±X, ±Y, ±Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

Fig. Temperature and Relative humidity range

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 5 / 28

 (5) Definition of test point
5mm

5mm
1 2

○
5

LCD Module (Active)

3 4

△T should be less than 10 ℃ (△T = | TOPR – TMAX| )

TOPR : Temperature of the center of the glass surface (Test point 5)

T1~ T4 : Temperature of each edge of the glass surface
TMAX : The highest temperature of the glass surface

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 6 / 28

2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3, Eldim EZ-Contrast

(Ta = 25 ± 2°C, VDD=5V, fv= 60Hz, fDCLK=75MHz, Inverter = 62.5(kHz ± 2.5kHz, Dimming : Max )
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (3)
C/R 1500 2000 -
(Center of screen) SR-3
Rising Tr - 10 20
Response (5)
Falling Tf - 6 10 msec
Time BM-7
G-to-G Tg - 8 -
Luminance of White (6)
YL Normal 400 500 - cd/m2
(Center of screen) SR-3
θL,R=0
Rx θU,D=0 0.642
Red
Ry 0.330
Viewing
Gx Angle 0.283
Green
Color Gy 0.602
TYP. TYP. (7),(8)
Chromaticity
Bx -0.03 0.145 +0.03 SR-3
(CIE 1931)
Blue
By 0.062
Wx 0.280
White
Wy 0.290
(7)
Color Gamut - - 72 - %
SR-3
(7)
Color Temperature - - 10000 - K
SR-3
θL 75 89 -
Hor.
Viewing θR 75 89 - (8)
C/R≥10 Degree
Angle θU 75 89 - EZ-Contrast
Ver.
θD 75 89 -
Brightness Uniformity (4)
Buni - - 25 %
(9 Points) SR-3

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Inverter = 62.5 ( kHz ± 2.5kHz, Dimming : Max )

Environment condition : Ta = 25 ± 2 °C

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 7 / 28

 Photo Detector Field
Photo detector
BM-7 2°/ 1°

SR-3 1°

Field

SR-3 : 50㎝
BM-7 : 50㎝

TFT - LCD Module

LCD Panel

The center of the screen

Note (2) Definition of test point

228 683 1138

Active Area
128 ⑨ ⑧ ⑦
Test Point
384 ⑥ ⑤ ④

640 ③ ② ①

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel

G max
C/R=
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 8 / 28

 Note (4) Definition of 9 points brightness uniformity

( B max − B min)
Buni = 100∗
B max
Bmax : Maximum brightness
Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) White (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME

Note (6) Definition of Luminance of White : Luminance of white at center point ⑤

Note (7) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point ⑤

Note (8) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 9 / 28

 3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25°C ± 2 °C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 4.5 5.0 5.5 V (1)
(a) Black - 1000 - mA
Current
of Power (b) White IDD - 1400 - mA (2),(3)
Supply
(c) N-Pattern - 1500 2200 mA
Vsync Frequency fV 48 60 66 Hz
Hsync Frequency fH 44 48 53 kHz
Main Frequency fDCLK 65 75 82 MHz
Rush Current IRUSH - - 4 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=60Hz, fDCLK = 75MHz, VDD = 5.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) N-Pattern

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=470㎲
Rush Current IRUSH can be measured when TRUSH. is 470㎲.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 10 / 28

3.2 Back Light Unit

The back light unit contains 12 direct-lighting type CCFTs ( Cold Cathode Fluorescent
Tube ). The characteristics of lamps are shown in the following tables.
Ta=25 ± 2°C

Item Symbol Min. Typ. Max. Unit Note

Lamp Current IL 3.0 8.0 8.5 mArms
Lamp Voltage VL - 1200 - Vrms
Operating Life Time Hr 50,000 60,000 - Hour (1)

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.
[Operating condition : Ta = 25±2℃, IL = 8.0mArms, For single lamp only. ]

Socket

HOT 1 COLD 1

HOT 2 COLD 2

LCD
Inverter
Module

HOT 11 COLD 11

HOT 12 COLD 12

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 11 / 28

3.2.1 Inverter Input Condition & Specification

Specifications
Items Symbol Conditions Unit Note
Min. Typ. Max.
Input
Vin - 23 24 25 V Ta=25±2 °C
Voltage
Input Vin=24.0V
IRUSH - 4.1 5.5 A Initial Turn-on
Current Vdim=3.3V
Lamp After 2 Hours
IO Vdim=3.3 V 7.5 8.0 8.5 mArms
Current Warm-Up
Frequency FLAMP Vin=24.0 V 60 62.5 65 kHz @Vin=24V

Backlight ON Vin=24.0 V 2.4 - 5.25

V -
On/Off OFF Vin=24.0 V 0 - 0.8

Dimming Max Lum 3.3 - -

VDIM V -
Control Min. Lum - - 0

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 12 / 28

 4. Block Diagram

SSC
CONTROL PCB

USER CONNECTOR TIMING CONTROLLER

SOURCE
FPC PCB DATA DRIVER
IC

DC/DC STEP DOWN

MEMORY(DCC)

LTA320WT
PANEL
DC/DC CONVERTOR
(AVDD/VDD/VON/VOFF)

DATA
GAMMA-GENERATOR
CONTROL SOURCE
FPC DATA DRIVER
VIN(5.0V) PCB IC
AVDD
VON/VOFF
VCOM VCOM-GENERATOR
R-STRING + FB
Y VOLTAGE
VDD(3.3V)
VDD(2.5V)
GATE DRIVER
IC

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 13 / 28

5. Input Terminal Pin Assignment

5.1. Input Signal & Power Connector : FI-E30S (JAE)

PIN No. Description PIN No. Description
1 No Connection 16 GND
2 No Connection 17 RxIN3-
3 No Connection 18 RxIN3+
4 GND 19 GND
5 RxIN0- 20 GND
6 RxIN0+ 21 LVDS OPTION (Note 1)
7 GND 22 No Connection
8 RxIN1- 23 GND
9 RxIN1+ 24 GND
10 GND 25 GND
11 RxIN2- 26 Vin
12 RxIN2+ 27 Vin
13 GND 28 Vin
14 RxCLK- 29 Vin
15 RxCLK+ 30 Vin

Note No Connection: This PINS are only used for SAMSUNG internal using.
(1) LVDS OPTION : If this PIN : HIGH (3.3 V) → Normal LVDS format
: LOW (GND) → JEIDA LVDS format
SEQUENCE : On = VDD(T1) ≥ LVDS Option ≥ Interface Signal(T2)
OFF = Interface Signal(T3) ≥ LVDS Option ≥ VDD

Vin T2 T3

LVDS
Option

LVDS
Signal
LVDS Option Sequence

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 14 / 28

 Note(1) Pin number starts from Right side

PCB
▼

Pin No. 1 Pin No. 30

#1 #30

connect name

#1 #30

Fig. Connector diagram

a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 15 / 28

 5.2. Inverter Input Pin Configuration
Connector : S14B-PHA-SM-TB(LF) (JST)
Pin No. Pin Configuration(FUNCTION)
1 24 V
2 24 V
3 24 V
4 24 V
5 24 V
6 GND
7 GND
8 GND
9 GND
10 GND
No Connection
11
* ERROR DETECTION (NORMAL : GND / ABNORMAL : 5V)
12 Backlight On /Off [ON:2.4 - 5.25 V, OFF: 0 - 0.8 V]
13 Dimming Control [0V:Min, 3.3V:Max]
14 No Connection

5.3. Inverter Input Power Sequence

1.1sec [Min]
0.95 Vin
20msec [Min]
Vin (24V)
0.1 Vin

Dimming Control
( 0 ~ 3.3 V )

0.5sec [Min]
0.5sec [Min]

Back Light On/Off 2.4 V

0.5sec [Min] 0.1sec [Min]

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 16 / 28

 5.4 LVDS Interface
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & Normal)
LVDS pin JEIDA -DATA VESA -DATA

TxIN/RxOUT0 R2 R0
TxIN/RxOUT1 R3 R1
TxIN/RxOUT2 R4 R2
TxOUT/RxIN0 TxIN/RxOUT3 R5 R3
TxIN/RxOUT4 R6 R4
TxIN/RxOUT6 R7 R5
TxIN/RxOUT7 G2 G0
TxIN/RxOUT8 G3 G1
TxIN/RxOUT9 G4 G2
TxIN/RxOUT12 G5 G3
TxOUT/RxIN1 TxIN/RxOUT13 G6 G4
TxIN/RxOUT14 G7 G5
TxIN/RxOUT15 B2 B0
TxIN/RxOUT18 B3 B1
TxIN/RxOUT19 B4 B2
TxIN/RxOUT20 B5 B3
TxIN/RxOUT21 B6 B4
TxOUT/RxIN2 TxIN/RxOUT22 B7 B5
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT26 DEN DEN
TxIN/RxOUT27 R0 R6
TxIN/RxOUT5 R1 R7
TxIN/RxOUT10 G0 G6
TxOUT/RxIN3 TxIN/RxOUT11 G1 G7
TxIN/RxOUT16 B0 B6
TxIN/RxOUT17 B1 B7
TxIN/RxOUT23 RESERVED RESERVED

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 17 / 28

5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

DATA SIGNAL
GRAY
DISPLAY
COLOR RED GREEN BLUE SCALE
(8bit)
LEVEL
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

BASIC CYAN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
COLOR RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY ↑
: : : : : : : : : : : : : : : : : :
SCALE R3~
OF : : : : : : : : : : : : : : : : : : R252
RED ↓
LIGHT 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R252

0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R252

RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R252

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

DARK 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY ↑
: : : : : : : : : : : : : : : : : :
SCALE G3~
OF : : : : : : : : : : : : : : : : : : G252
GREEN ↓
LIGHT 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G252

0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G252

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G252

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 B1

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 B2
GRAY ↑
SCALE : : : : : : : : : : : : : : : : : : B3~
OF : : : : : : : : : : : : : : : : : : B252
BLUE ↓
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 B252

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 B252

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 B252

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 18 / 28

 6. Interface Timing

6.1 Timing Parameters ( DE only mode )

SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 65 75 82 MHz -

Hsync Frequency FH 44 48 53 KHz -

Vsync FV 48 60 66 Hz -
Active
Display TVD - 768 - lines -
Vertical Period
Display Term
Vertical
TVB 773 838 1200 lines -
Total

Active
Display THD - 1366 - clocks -
Horizontal Period
Display Term
Horizontal
TH 1460 1600 2000 clocks -
Total

Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 19 / 28

 6.2 Timing diagrams of interface signal ( DE only mode )

TV

TVD TVB

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

TC
TCH TCL

DCLK 0.5
VCC

TDS TDH

DISPLAY 0.5
DATA
VCC

TES

DE 0.5
VCC

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 20 / 28

6.3 Power ON/OFF Sequence

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

0<T1≤10msec
0<T2≤50msec
0<T3≤50msec
1000msec≤T4

1000msec≤T5
(Recommend Value) 2.4 V
100msec≤T6
(Recommend Value)

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.

ƒ The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
ƒ Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
ƒ In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
ƒ T4 should be measured after the Module has been fully discharged between power off
and on period.
ƒ Interface signal should not be kept at high impedance when the power is on.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 21 / 28

7. Outline Dimension (Front View)

Model LTA320WT-L06 Doc. No 05-002-G-061222 Page 22 / 28

7. Outline Dimension (Rear View)

Model LTA320WT-L06 Doc. No 05-002-G-061222 Page 23 / 28

8. PACKING

8.1 CARTON (Internal Package)

(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method

Packing
-Pallet Box Direction be able to open it

Cushion-Foam

LCD Module

Cushion-Foam

Pallet-Plastic

8.2 Packing Specification

Item Specification Remark

1. 84 Kg / LCD (12ea)
12ea / (Packing- 2. 7 Kg / Cushion-pallet (2ea)
LCD Packing
Pallet Box) 3. 5.7 Kg / Packing-Pallet Box (1ea)
4. Cushion-pallet Material : EPS
5. Packing-Pallet Box Material : DW4
1. Pallet weight = 8kg
Pallet 1Box / Pallet
2. 8Kg/Pallet

Packing Direction Vertical

Total Pallet Size H x V x height 1150mm(H) x 985mm(V) x 634mm(height)

Pallet(8kg) + Module(7*12=84) +
Total Pallet Weight 104.7 kg
Cushion(up+botton=7kg) + Pallet-BOX(5.7kg)

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 24 / 28

9. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.

(1) Parts number : LTA320WT-L06

(2) Revision: Three letters
(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
(4) Nameplate Indication

Week code : 05 29
week
LTA320WT-L06
year
40mm

XXXXXXXXXX XXX
Revision code
Lot number

80mm
(5) Packing box attach

100mm
LTA320WT-L06 Part number

XXXX
10

Box serial number

165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 25 / 28

10. General Precautions
10.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFT back light.

(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not pull or fold the lamp wire.

(m) Do not adjust the variable resistor located on the Module.

(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized.

(o) Pins of I/F connector should not be touched directly with bare hands.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 26 / 28

10.2 Storage

(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35℃
and relative humidity of less than 70%.

(b) Do not store the TFT-LCD Module in direct sunlight.

(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.

10.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).

10.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 27 / 28

 10.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LTA320WT-L06 Doc. No 05-002-G-061222 Page 28 / 28