Setup Sheet Report
4 - AXIS VMC
GENERAL INFORMATION
PROJECT NAME: logo de caa de azucar
CUSTOMER NAME: panela san sebas
PROGRAMMER: Sergio Dario Quintero Meneses
DRAWING: caa REVISION: agrandar mas la
DATE: jueves, 7 de diciembre de 2017
TIME: 7:59 a. m.
D:\USERS\USUARIO\DESKTOP\CAA\CAA 22 II SEMESTRE 2017.EMCAM
COMMENTS
STOCK
STOCK: YES
SHAPE: Box
SIZE: 135.0, 66.0, 65.0
RADIUS: NA
LENGTH: NA
AXIS: NA
FILE: NA
IDN: NA
D:\USERS\USUARIO\DOCUMENTS\MY
CYCLE TIME: 0 HOURS, 38 MINUTES, 7 SECONDS
OPERATION LIST
OPERATION INFO 1 - Facing
CYCLE TIME: 0 HOURS, 0 MINUTES, 47 SECONDS
COMMENT:
PROGRAM NUMBER: 0
SPINDLE SPEED: 600 RPM
FEEDRATE: 600.0 mm/min
CLEARANCE PLANE: 50.0
RETRACT PLANE: 10.0
FEED PLANE: 8.0
DEPTH: -0.2
STOCK TO LEAVE: 0.0
COMP TO TIP: YES
WORK OFFSET: 0
TOOL INFO 52 Face Mill / Shell Mill
TYPE: Face mill
NUMBER: 3
DIAMETER: 52.0
CORNER RADIUS: 0.0
LENGTH OFFSET: 3
DIAMETER OFFSET: 3
MATERIAL: Carbide
NUMBER OF FLUTES: 4
FPT: SFM:
MFG CODE:
ASSEMBLY:
HOLDER: B2C3-0016 C:
TIME: 00:00:47
OPERATION INFO 2 - 2D High Speed (2D Dynamic Mill)
CYCLE TIME: 0 HOURS, 21 MINUTES, 8 SECONDS
COMMENT:
PROGRAM NUMBER: 0
SPINDLE SPEED: 1000 RPM
FEEDRATE: 1000.0 mm/min
CLEARANCE PLANE: 0.0
RETRACT PLANE: 6.0
FEED PLANE: 5.0
DEPTH: -10.2
STOCK TO LEAVE: 0.0
COMP TO TIP: YES
WORK OFFSET: 0
TOOL INFO 6 Flat Endmill
TYPE: Endmill1 Flat
NUMBER: 11
DIAMETER: 6.0
CORNER RADIUS: 0.0
LENGTH OFFSET: 11
DIAMETER OFFSET: 11
MATERIAL: Carbide
NUMBER OF FLUTES: 4
FPT: SFM:
MFG CODE:
ASSEMBLY:
HOLDER: B2C3-0016 C:
TIME: 00:21:08
OPERATION INFO 3 - 2D High Speed (2D Dynamic Rest Mill)
CYCLE TIME: 0 HOURS, 16 MINUTES, 11 SECONDS
COMMENT:
PROGRAM NUMBER: 0
SPINDLE SPEED: 5500 RPM
FEEDRATE: 1000.0 mm/min
CLEARANCE PLANE: 0.0
RETRACT PLANE: 6.0
FEED PLANE: 5.0
DEPTH: -10.2
STOCK TO LEAVE: 0.0
COMP TO TIP: YES
WORK OFFSET: 0
TOOL INFO 2 Flat Endmill
TYPE: Endmill1 Flat
NUMBER: 15
DIAMETER: 2.0
CORNER RADIUS: 0.0
LENGTH OFFSET: 15
DIAMETER OFFSET: 15
MATERIAL: Carbide
NUMBER OF FLUTES: 4
FPT: SFM:
MFG CODE:
ASSEMBLY:
HOLDER: B2C3-0016 C:
TIME: 00:16:11
TOOL LIST Sorted: NO
TOOL INFO 52 Face Mill / Shell Mill
TYPE: Face mill
NUMBER: 3
DIAMETER: 52.0
CORNER RADIUS: 0.0
LENGTH OFFSET: 3
DIAMETER OFFSET: 3
MATERIAL: Carbide
NUMBER OF FLUTES: 4
FPT: SFM:
MFG CODE:
ASSEMBLY:
HOLDER: B2C3-0016 C:
TIME: 00:00:47
USED BY OPERATION: #1 1 - Facing
TOOL INFO 6 Flat Endmill
TYPE: Endmill1 Flat
NUMBER: 11
DIAMETER: 6.0
CORNER RADIUS: 0.0
LENGTH OFFSET: 11
DIAMETER OFFSET: 11
MATERIAL: Carbide
NUMBER OF FLUTES: 4
FPT: SFM:
MFG CODE:
ASSEMBLY:
HOLDER: B2C3-0016 C:
TIME: 00:21:08
USED BY OPERATION: #2 2 - 2D High Speed (2D Dynamic Mill)
TOOL INFO 2 Flat Endmill
TYPE: Endmill1 Flat
NUMBER: 15
DIAMETER: 2.0
CORNER RADIUS: 0.0
LENGTH OFFSET: 15
DIAMETER OFFSET: 15
MATERIAL: Carbide
NUMBER OF FLUTES: 4
FPT: SFM:
MFG CODE:
ASSEMBLY:
HOLDER: B2C3-0016 C:
TIME: 00:16:11
USED BY OPERATION: #3 3 - 2D High Speed (2D Dynamic Rest Mill)
WORK OFFSETS
OFFSET INFO
NUMBER: 0 PLANE: Top ORIGIN: 0.0, 0.0, 0.0
USED BY OPERATION: #1 1 - Facing
USED BY OPERATION: #2 2 - 2D High Speed (2D Dynamic Mill)
USED BY OPERATION: #3 3 - 2D High Speed (2D Dynamic Rest Mill)
IMAGE LIST
Image #1
