Eg 71 2-pole

Single-phase asynchronous motor

Properties: Connection: 230 V /50 Hz AC system , optional designs for
110 V / 60 Hz or other voltages / frequencies
Running capacitor required
Cable connection, optional plug-in connector
Service life: 20,000 hours, S1 duty
Insulation mat. class: B, optional F
System of protection: IP 40
Special model: Design for short-time duty with high performance
Alloy rotor for higher starting torque
Options: Thermal protection, special shafts, custom designed

Type Name Eg 7120-2 Eg 7140-2 Eg 7150-2

Nominal voltages U AC voltage 230 230 230

Specication Nominal power P2 W 22 72 89

Nominal speed Nnom rpm 2750 2750 2750
Nominal torque Tnom Ncm 7.5 25.0 31.0
Starting torque TA Ncm 6.5 20.0 21.0
Nominal current Inom mA 270 590 700
No-load current I0 mA 270 590 870

Characteristics Locked rotor speed nbreak rpm 2200 2200 2200

Locked rotor torque Tbreak Ncm 14.5 42.0 55.0
Nominal efciency % 32.5 50.0 58.0

Connection Terminal resistance R Ohm 215 73 50

Input power P1 W 65 140 155
Running capacitor C F 2.0 5.0 6.0

Dynamics Weight m kg 1.2 1.7 2.0

Moment of inertia J gcm2 219 376 455

Thermal Adm. ambient temperature Ta C -20 to +40 -20 to +40 -20 to +40
Max. adm. stator temperature Tmax C +120 +120 +120

Coupling Shaft diameter d mm 8 8 8

Max. axial force Fa N 20 20 20
Max. radial force Fr N 220 220 220

Dimensions

Type L / mm

Eg 7120-2 118
Eg 7140-2 138
Eg 7150-2 138

System technology (tables next page)

Recommended Worm gear GS 3

combinations Spur gear Z8
Planetary gear PM 60

Rotary encoder upon request

Brake upon request
Last modied: 04/2013

AC-22
 Eg 71 2-pole

Gear unit combinations

All torques are calculated with an duty factor of 1!

Additional recommended combinations upon request

Type Name Eg 7120-2 Eg 7140-2 Eg 7150-2

Nominal voltage / AC voltage 230 230 230

n M n M n M
GS 3 Worm gear 1-stage rpm Nm rpm Nm rpm Nm
i=2.5 1100 0.1 1100 0.4 1100 0.54
i=5 550 0.3 550 0.9 550 1.09
i=10 275 0.5 275 1.5 275 1.9
i=15 183 0.7 183 2.3 183 2.8
i=24 115 0.8 115 2.7 115 3.3
i=30 92 1.0 92 3.4 92 4.2
i=38 72 1.1 72 3.8 72 4.7
i=55 50 1.2 50 4.1 50 5.1
i=75 37 1.4 37 4.7 37 5.8
i=100 28 1.9 28 6.3 28 7.8
Additional reductions upon request.

n M n M n M
Z8 Spur gear 24 stage rpm Nm rpm Nm rpm Nm
i=5.6 491 0.4 491 1.3 491 1.6
i=13 212 0.9 212 2.9 212 3.6
i=17.5 157 1.2 157 3.9 157 4.9
i=25 110 1.7 110 5.6 110 7.0
i=36.5 75 2.3 75 7.8 75 9.6
i=49.5 56 3.2 56 10.5 56 13
i=58.5 47 3.7 47 12.4 47 12*
i=71 39 4.5 39 15.1 39 12*
i=96.5 28 5.9 28 12* 28 12*
i=121 23 7.4 23 12* 23 12*
Additional reductions upon request. * Max. load at the gear output.
(Motor power must be limited if necessary)
n M n M n M
PM/P 60 Planetary gear 1-3 stage rpm Nm rpm Nm rpm Nm
i=3.7 743 0.2 743 0.7 743 0.9
Diagram upon request i=5.2 529 0.3 529 1.0 529 1.2
i=6.8 404 0.4 404 1.3 404 1.6
i=13.7 201 0.8 201 2.6 201 3.2
i=18.4 149 1.0 149 3.2 149 4
i=28.9 95 1.5 95 5.1 95 6
i=45.6 60 2.4 60 8.0 60 10
i=78.7 35 4.1 35 13.8 35 17
06/10/CD-E/AC-23

i=115 24 6.0 24 20.1 24 25

i=169 16 8.9 16 29.6 16 37

Additional reductions upon request. * Max. load at the gear output.

(Motor power must be limited if necessary)

AC-23
 Eg 71 4-pole

Single-phase asynchronous motor

Properties: Connection: 230 V /50 Hz AC system , optional designs for
110 V / 60 Hz or other voltages / frequencies
Running capacitor required
Cable connection, optional plug-in connector
Service life: 20,000 hours, S1 duty
Insulation mat. class: B, optional F
System of protection: IP 00
Special model: Design for short-time duty with high performance
Alloy rotor for higher starting torque
Options: Thermal protection, special shafts, custom designed

Type Name Eg 7120-4 Eg 7140-4 Eg 7150-4

Nominal voltages U AC voltage 230 230 230

Specication Nominal power P2 W 12 26 29

Nominal speed Nnom rpm 1300 1300 1300
Nominal torque Tnom Ncm 9 19.0 21.0
Starting torque TA Ncm 8 18.0 19.0
Nominal current Inom mA 260 350 360
No-load current I0 mA 270 590 600

Characteristics Locked rotor speed nbreak rpm 2200 2200 2200

Locked rotor torque Tbreak Ncm
Nominal efciency % 32.5 50.0 58.0

Connection Terminal resistance R Ohm 215 73 50

Input power P1 W 65 140 155
Running capacitor C F 3.0 5.0 6.0

Dynamics Weight m kg 1.2 1.7 2.0

Moment of inertia J gcm2 219 376 455

Thermal Adm. ambient temperature Ta C -20 to +40 -20 to +40 -20 to +40
Max. adm. stator temperature Tmax C +120 +120 +120

Coupling Shaft diameter d mm 8 8 8

Max. axial force Fa N 20 20 20
Max. radial force Fr N 220 220 220

Dimensions

Type L / mm

Eg 7120-4 118
Eg 7140-4 138
Eg 7150-4 138

System technology (tables next page)

Recommended Worm gear GS 3

combinations Spur gear Z8
Planetary gear PM 60

Rotary encoder upon request

Brake upon request
Last modied: 04/2013

AC-24
 Eg 71 4-pole

Gear unit combinations

All torques are calculated with an duty factor of 1!

Additional recommended combinations upon request

Type Name Eg 7120-4 Eg 7140-4 Eg 7150-4

Nominal voltage / AC voltage 230 230 230

n M n M n M
GS 3 Worm gear 1-stage rpm Nm rpm Nm rpm Nm
i=2.5 520 0.2 520 0.3 520 0.37
Diagram upon request i=5 260 0.3 260 0.7 260 0.74
i=10 130 0.5 130 1.1 130 1.3
i=15 87 0.8 87 1.7 87 1.9
i=24 54 1.0 54 2.1 54 2.3
i=30 43 1.2 43 2.6 43 2.8
i=38 34 1.4 34 2.9 34 3.2
i=55 24 1.5 24 3.1 24 3.5
i=75 17 1.7 17 3.6 17 3.9
i=100 13 2.3 13 4.8 13 5.3
Additional reductions upon request.

n M n M n M
Z8 Spur gear 24 stage rpm Nm rpm Nm rpm Nm
i=5.6 232 0.5 232 1.0 232 1.1
Diagram upon request i=13 100 1.1 100 2.2 100 2.5
i=17.5 74 1.4 74 3.0 74 3.3
i=25 52 2.0 52 4.3 52 4.7
i=36.5 36 2.8 36 5.9 36 6.5
i=49.5 26 3.8 26 8.0 26 9
i=58.5 22 4.5 22 9.4 22 12*
i=71 18 5.4 18 11.5 18 12*
i=96.5 13 7.0 13 12* 13 12*
i=121 11 8.8 11 12* 11 12*
Additional reductions upon request. * Max. load at the gear output.
(Motor power must be limited if necessary)
n M n M n M
PM/P 60 Planetary gear 1-3 stage rpm Nm rpm Nm rpm Nm
i=3.7 351 0.3 351 0.6 351 0.6
Diagram upon request i=5.2 250 0.4 250 0.7 250 0.8
i=6.8 191 0.5 191 1.0 191 1.1
i=13.7 95 0.9 95 2.0 95 2.2
i=18.4 71 1.2 71 2.4 71 3
i=28.9 45 1.8 45 3.8 45 4
i=45.6 29 2.9 29 6.1 29 7
i=78.7 17 5.0 17 10.5 17 12
06/10/CD-E/AC-25

i=115 11 7.2 11 15.3 11 17

i=169 8 10.6 8 22.5 8 25

Additional reductions upon request. * Max. load at the gear output.

(Motor power must be limited if necessary)

AC-25