03 Ball Valves and Couplings 1

Technical Information
Ball valves for high pressure applications
General
Please ensure that the maximum pressure is in complicance with all connexions in the
system.
Ball valves generally should not be utilised as throttle valves, therefore they should either be
kept closed or open otherwise the ball seal might get damaged.
Please note particularly concerning long-term storages the ball valves should be arrested in
open-position
Designation Material
Body Free cutting steel, brown-finished*
Sealing, stem NBR
Stem Free cutting steel, galvanised
Sealing, ball Polyamide / POM
Ball Free cutting steel, chrome plated
* also galvanised body available upon request
Technical information
The central feature of the 2/2 way and 3/2 way compact ball valves is the floating
ball sealing the system through an elastic and pre-stressed ball seal. Moreover this sealing
function is enhanced by the actual system pressure. Also during vacuum and low pressure
applications the pressure tightness of the system is guaranteed. Additionally an extended
maintenance cycle is achieved.
However for the 3/2 compact ball valves a pressurisation should only be carried out via
connexion port 1. In case of a pressurisation from any other port of the system a leak-free
sealing can not be guaranteed. The leak-free sealing of the closed part can only be obtained
if the pressure level is lower than on the pressure conveying side of the system.
Characteristics
A notch on the front of the stem enables an optical indication of switching position
Stop pin and washer disk assure a switch limitation
Manufacturers identification, manufacturing date as well as the operating pressure
embossed on body
Standard switching positions:
3/2 with L-bore, 0 90
3/2 with T-bore, 0 90
Manifold ball valves

For an unobjectionable and leakfree sealing pre-stessed and elastical plastic bushings are
embedded centrically within the stem of the manifold ball valves.
The stem thereby can be operated by a square steel handle bar. The ball sealing is squeezed
into position after operating pressure release. Adequately to a pressure increase the contact
pressure augments as well. Also during vacuum and low pressure applications the pressure
tightness of the system is guaranteed. The stem on the front is notched in order to facilitate
an identification of the ball bore and the switching position. According to each individual
implementation the handle bar can be mounted and shifted by 45. The flow direction of the
medium is not predetermined.
Standard position Switching position Intermediate position
3/2 with L bore, 0-90

positive overlap*
3/2 with T bore, 0-90

positive overlap*
4/3 with L bore, 0-45- 90
4/3 with T bore, 0-45- 90

positive overlap*
4/2 with X bore, 0-90
*Before intial operation please make sure that inputs and outputs are shut.
Further switching positions available on demand.
Ball valves for low pressure applications
Designation Material
Sealing PTFE
Ball Hot pressed brass MS 58 chrome-plated
Stem Hot pressed brass MS 58 MS 58
O-ring NBR
Handle bar Steel, galvanised
Handle Aluminium (red, yellow DVGW*)
Bolt Steel, galvanised
* German Technical and Scientific Association on Gas and Water
HANSA-FLEX ball valves for a low pressure applicatin range are suitable for industrial,
pneumatics and hydraulic applications as well as for heating systems and sanitary facilities.
Resistant towards hot water, wet steam, petrol, leadfree petrol with ethyl alcohol, heating
oil, diesel, various oils, kerosene, acids, gases, compressed air etc. (unsuitable for methanol
and saturated steam).
The operating pressure for gaseous mediums between PN 1 and PN 4 as well as for all
further mediums should not exceed 32 bar.
BKHL
Block ball valve BKH
For compression fittings, light
series, DIN 2353, male metric
thread, 24 seal
body: steel; ball: steel nickel pl.
stem: steel zinc pl.; ball sealing:
POM (DIN 16); stem sealing: NBR
Article category 4101
Disignation DN D Tube O.D. Nominal Pressure (bar)
BKHL 04 4 M 12x1,5 6 500

BKHL 06 6 M 14x1,5 8 500
BKHL 08 8 M 16x1,5 10 500
BKHL 10 10 M 18x1,5 12 500
BKHL 13 13 M 22x1,5 15 500
BKHL 16 16 M 26x1,5 18 500
BKHL 20 20 M 30x2 22 400
BKHL 25 25 M 36x2 28 350
BKHL 32 32 M 45x2 35 350
BKHL 40 40 M 52x2 42 350
BKHL A
For compression fittings, light
series, DIN 2353
Block ball valve with fixation drill
for ATLAS, male metric thread,
light series, 24 sealing cone;
body: steel; ball: steel nickel pl.;
POM (DIN 16); stem sealing: NBR
BKHL 10 A 10 M 18x1,5 12 500

BKHS
metric male thread, 24 seal,
for compression fittings, heavy
series, DIN 2353
POM; stem sealing: NBR
BKHS 04 4 M 16x1,5 8 500

BKHS 06 6 M 18x1,5 10 500
BKHS 08 8 M 20x1,5 12 500
BKHS 10 10 M 22x1,5 14 500
BKHS 13 13 M 24x1,5 16 500
BKHS 16 16 M 30x2 20 500
BKHS 20 20 M 36x2 25 400
BKHS 25 25 M 42x2 30 350
BKHS 32 32 M 52x2 38 320
BKN
Block ball valve BKN
with female NPT thread
ANSI B.2.1
body: steel
ball: steel nickel pl.
stem: steel zinc pl.
ball sealing: POM
stem sealing: NBR
Disignation DN Connection thread IG-NPT Nominal Pressure (bar)
BKN 06 6 1/4 500

BKN 10 10 3/8 500
BKN 13 13 1/2 500
BKN 20 20 3/4 400
BKN 25 25 1 350
BKN 32 32 11/4 350
BKR
Block ball valve
with female NPT thread
body: steel
stem: stell zinc pl.
ball sealing: POM
stem sealing: NBR
DIN/ISO 228
Disignation DN Connection thread IG-NPT Nominal Pressure (bar)
BKR 04 4 1/8 500

BKR 06 6 G 1/4 500
BKR 10 10 G 3/8 500
BKR 13 13 G 1/2 500
BKR 20 20 G 3/4 400
BKR 25 25 G 1 350
BKR 32 32 G 11/4 350
BKR 40 40 G 11/2 350
3 BKHL LK
3-way block ball valve
also applicable for lower pressure
range, male metric thread, light
series, 24 seal, metallic sealing,
compact casing, L-drill, switch
route 90, case and stem NBR
steel, switch ball hard-chromium
plated POM; ball sealing: POM
(DIN 16), stem sealing: NBR
Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)
3 BKHL 04 L K 4 M 12x1,5 6 400

3 BKHL 06 L K 6 M 14x1,5 8 400
3 BKHL 08 L K 8 M 16x1,5 10 400
3 BKHL 10 L K 10 M 18x1,5 12 400
3 BKHL 13 L K 13 M 22x1,5 15 350
3 BKHL 16 L K 16 M 26x1,5 18 350
3 BKHL 20 L K 20 M 30x2 22 350
3 BKHL 25 L K 25 M 36x2 28 350
3 BKHL TK
also appplicable for the lower pressure
range, male metric thread, light series,
24 seal, metallic sealing, compact
casing, T-drill, 90 switch route, case
and stem NBR steel, switch ball hard-
chromium plated POM; ball sealing:
POM (DIN 16), stem sealing: NBR
3 BKHL 08 T K 8 M 16x1,5 10 400

3 BKHL 10 T K 10 M 18x1,5 12 400
3 BKHL 13 T K 13 M 22x1,5 15 350
3 BKHL 16 T K 16 M 26x1,5 18 350
3 BKHS LK
male metric thread, heavy series,
24 seal, compact casing, L-
drill; switch route 90, case
and stem NBR steel, switch ball
hard-chromium plated POM; ball
sealing: POM (DIN 16), stem
sealing: NBR
3 BKHS 04 L K 4 M 16x1,5 8 500

3 BKHS 06 L K 6 M 18x1,5 10 500
3 BKHS 08 L K 8 M 20x1,5 12 500
3 BKHS 10 L K 10 M 22x1,5 14 500
3 BKHS 13 L K 13 M 24x1,5 16 500
3 BKHS 16 L K 16 M 30x2 20 500
3 BKHS 20 L K 20 M 36x2 25 400
3 BKHS 25 L K 25 M 42x2 30 350
3 BKR LK
also applicable for the lower
pressure range, male metric
thread, female BSP thread, seal
necessary, thread has depth to be
taken into consideration, compact
casing, L-drill
Disignation DN Connection thread IG Pressure (bar)
3 BKR 04 L K 4 G 1/8 400

3 BKR 06 L K 6 G 1/4 400
3 BKR 10 L K 10 G 3/8 400
3 BKR 13 L K 13 G 1/2 350
3 BKR 20 L K 20 G 3/4 350
3 BKR 25 L K 25 G 1 350
3 BKR TK
3-way block ball valve,
male metric thread, female
BSP thread, seal necessary,
thread depth to be taken into
consideration, compact case,
T-drill
Disignation DN Connection thread IG Nominal Pressure (bar)
3 BKR 10 T K 10 G 3/8 350

3 BKR 13 T K 13 G 1/2 350
3 BKHL L
thread, light series, 24 seal,
metallic sealing, L-drill, according
to DIN 2353, body: steel; ball
piston: steel nickel pl., ball
sealing: POM, ball piston sealing:
NBR
3 BKHL 04 L 4 M 12x1,5 6 500

3 BKHL 06 L 6 M 14x1,5 8 500
3 BKHL 08 L 8 M 16x1,5 10 500
3 BKHL 10 L 10 M 18x1,5 12 500
3 BKHL 13 L 13 M 22x1,5 15 500
3 BKHL 16 L 16 M 26x1,5 18 500
3 BKHL 20 L 20 M 30x2 22 400
3 BKHL 25 L 25 M 36x2 28 350
3 BKHL 32 L 32 M 45x2 35 350
3 BKHL 40 L 40 M 52x2 42 63
3 BKHS L
24 seal, metallic sealing, L-drill,
according to DIN 2353, body:
steel, ball piston: steel nickel
pl., ball sealing: POM, ball piston
sealing: NBR
3 BKHS 04 L 4 M 16x1,5 8 500

3 BKHS 06 L 6 M 18x1,5 10 500
3 BKHS 08 L 8 M 20x1,5 12 500
3 BKHS 10 L 10 M 22x1,5 14 500
3 BKHS 13 L 13 M 24x1,5 16 500
3 BKHS 16 L 16 M 30x2 20 500
3 BKHS 20 L 20 M 36x2 25 400
3 BKHS 25 L 25 M 42x2 30 350
3 BKHS 32 L 32 M 52x2 38 350
3 BKR L
pressure range, female BSP
thread, L-drill, thread according
to DIN/ ISO 228, body: steel,
ball piston: steel nickel pl., ball
sealing: POM, ball piston sealing: NBR
3 BKR 04 L 4 G 1/8 500

3 BKR 06 L 6 G 1/4 500
3 BKR 10 L 10 G 3/8 500
3 BKR 13 L 13 G 1/2 400
3 BKR 20 L 20 G 3/4 400
3 BKR 25 L 25 G 1 350
3 BKR 32 L 32 G 11/4 350
3 BKR 40 L 40 G 11/2 63
3 BKHL T
male metric thread, light series,
24 seal, metallic sealing, T-drill,
thread according to DIN/ ISO
228, body: steel, ball piston:
steel nickel pl., ball sealing: POM,
ball piston sealing: NBR
3 BKHL 04 T 4 M 12x1,5 6 500

3 BKHL 06 T 6 M 14x1,5 8 500
3 BKHL 08 T 8 M 16x1,5 10 500
3 BKHL 10 T 10 M 18x1,5 12 500
3 BKHL 13 T 13 M 22x1,5 15 500
3 BKHL 16 T 16 M 26x1,5 18 500
3 BKHL 20 T 20 M 30x2 22 400
3 BKHL 25 T 25 M 36x2 28 350
3 BKHL 32 T 32 M 45x2 35 350
3 BKHL 40 T 40 M 52x2 42 63
3 BKHS T
thread, heavy series, 24 seal,
metallic sealing, T-drill, according
to DIN 2353, body: steel, ball
piston: steel nickel pl., ball
sealing: POM, ball piston sealing:
NBR
3 BKHS 04 T 4 M 16x1,5 8 500

3 BKHS 06 T 6 M 18x1,5 10 500
3 BKHS 08 T 8 M 20x1,5 12 500
3 BKHS 10 T 10 M 22x1,5 14 500
3 BKHS 13 T 13 M 24x1,5 16 500
3 BKHS 16 T 16 M 30x2 20 500
3 BKHS 20 T 20 M 36x2 25 400
3 BKHS 25 T 25 M 42x2 30 350
3 BKHS 32 T 32 M 52x2 38 350
3 BKR T
female BSP thread, seal necessary,
thread depth to be taken into
consideration, T-drill, thread
according to DIN/ ISO 228, body:
steel, ball piston: steel nickel
pl., ball sealing: POM, ball piston
sealing: NBR
3 BKR 04 T 4 G 1/8 500

3 BKR 06 T 6 G 1/4 500
3 BKR 10 T 10 G 3/8 500
3 BKR 13 T 13 G 1/2 400
3 BKR 20 T 20 G 3/4 400
3 BKR 25 T 25 G 1 350
3 BKR 32 T 32 G 11/4 350
3 BKR 40 T 40 G 11/2 63
4 BKHL L
24 seal, metallic sealing, L-drill
4 BKHL 04 L 4 M 12x1,5 6 500

4 BKHL 06 L 6 M 14x1,5 8 500
4 BKHL 08 L 8 M 16x1,5 10 500
4 BKHL 10 L 10 M 18x1,5 12 500
4 BKHL 13 L 13 M 22x1,5 15 400
4 BKHL 16 L 16 M 26x1,5 18 400
4 BKHL 20 L 20 M 30x2 22 350
4 BKHL 25 L 25 M 36x2 28 350
4 BKHL 32 L 32 M 45x2 35 350
4 BKHL 40 L 40 M 52x2 42 63
4 BKHS L
24 seal, metallic sealing, L-drill;
according to DIN 2353
body: steel; ball piston: steel nickel
pl.; ball sealing: POM; ball piston
sealing: NBR
4 BKHS 04 L 4 M 16x1,5 8 500

4 BKHS 06 L 6 M 18x1,5 10 500
4 BKHS 08 L 8 M 20x1,5 12 500
4 BKHS 10 L 10 M 22x1,5 14 500
4 BKHS 13 L 13 M 24x1,5 16 400
4 BKHS 16 L 16 M 30x2 20 400
4 BKHS 20 L 20 M 36x2 25 350
4 BKHS 25 L 25 M 42x2 30 350
4 BKHS 32 L 32 M 52x2 38 350
4 BKR L
Female BSP thread, seal
necessary, thread depth has to be
taken into consideration, L-drill,
according to DIN/ ISO 228,
body: steel
ball piston: steel nickel pl.
ball sealing: POM
4 BKR 04 L 4 G 1/8 500

4 BKR 06 L 6 G 1/4 500
4 BKR 10 L 10 G 3/8 500
4 BKR 13 L 13 G 1/2 400
4 BKR 20 L 20 G 3/4 400
4 BKR 25 L 25 G 1 350
4 BKR 32 L 32 G 11/4 350
4 BKR 40 L 40 G 11/2 63
4 BKHL T
according to DIN 2353
body: steel
ball sealing: POM
4 BKHL 04 T 4 M 12x1,5 6 500

4 BKHL 06 T 6 M 14x1,5 8 500
4 BKHL 08 T 8 M 16x1,5 10 500
4 BKHL 10 T 10 M 18x1,5 12 500
4 BKHL 13 T 13 M 22x1,5 15 400
4 BKHL 16 T 16 M 26x1,5 18 400
4 BKHL 20 T 20 M 30x2 22 400
4 BKHL 25 T 25 M 36x2 28 350
4 BKHL 32 T 32 M 45x2 35 350
4 BKHL 40 T 40 M 52x2 42 63
4 BKHS T
according to DIN 2353,
body: steel
ball sealing: POM
4 BKHS 04 T 4 M 16x1,5 8 500

4 BKHS 06 T 6 M 18x1,5 10 500
4 BKHS 08 T 8 M 20x1,5 12 500
4 BKHS 10 T 10 M 22x1,5 14 500
4 BKHS 13 T 13 M 24x1,5 16 400
4 BKHS 16 T 16 M 30x2 20 400
4 BKHS 20 T 20 M 36x2 25 400
4 BKHS 25 T 25 M 42x2 30 350
4 BKHS 32 T 40 M 52x2 38 350
4 BKR T
thread depth has to be taken into
consideration, T-drill, according
to DIN/ ISO 228
body: steel
ball sealing: POM
4 BKR 04 T 4 3 G 1/8 500

4 BKR 06 T 6 4 G 1/4 500
4 BKR 10 T 10 6 G 3/8 500
4 BKR 13 T 13 8 G 1/2 400
4 BKR 20 T 20 12 G 3/4 400
4 BKR 25 T 25 16 G 1 350
4 BKR 32 T 32 20 G 11/4 350
4 BKR 40 T 40 24 G 11/2 63
4 BKHL X
24 seal, metallic sealing, X-drill,
according to DIN 2353,
body: steel
ball sealing: POM
4 BKHL 04 X 4 M 12x1,5 6 500

4 BKHL 06 X 6 M 14x1,5 8 500
4 BKHL 08 X 8 M 16x1,5 10 500
4 BKHL 10 X 10 M 18x1,5 12 500
4 BKHL 13 X 13 M 22x1,5 15 400
4 BKHL 16 X 16 M 26x1,5 18 400
4 BKHL 20 X 20 M 30x2 22 400
4 BKHL 25 X 25 M 36x2 28 350
4 BKHL 32 X 32 M 45x2 35 350
4 BKHL 40 X 40 M 52x2 42 63
4 BKHS X
24 seal, metallic sealing,
X-drill, according to DIN 2353,
body: steel
ball sealing: POM
4 BKHS 04 X 4 M 16x1,5 8 500

4 BKHS 06 X 6 M 18x1,5 10 500
4 BKHS 08 X 8 M 20x1,5 12 500
4 BKHS 10 X 10 M 22x1,5 14 500
4 BKHS 13 X 13 M 24x1,5 16 400
4 BKHS 16 X 16 M 30x2 20 400
4 BKHS 20 X 20 M 36x2 25 400
4 BKHS 25 X 25 M 42x2 30 350
4 BKHS 32 X 32 M 52x2 38 350
4 BKR X
thread depth has to be taken into
consideration, X-drill, according
to DIN/ ISO 228
body: steel
ball sealing: POM
4 BKR 04 X 4 G 1/8 500

4 BKR 06 X 6 G 1/4 500
4 BKR 10 X 10 G 3/8 500
4 BKR 13 X 13 G 1/2 400
4 BKR 20 X 20 G 3/4 400
4 BKR 25 X 25 G 1 350
4 BKR 32 X 32 G 11/4 350
4 BKR 40 X 40 G 11/2 63
BK ALU GRIFF SW
Handle bar for ball valve
straight, aluminium, red anodised SW
Disignation SW K
BK ALU GRIFF SW 9 9 150

BK GEKR GRIFF SW
Handle bar for ball valve
bent, zinc die casted, width SW
across flat 17 steel
K
Disignation SW K
BK GEKR GRIFF SW 9 9 107

BKR ND K
Block ball valve for lower
pressure range, brass
Female BSP thread, seal necessary,
take thread depth into consideration,
low pressure ranges, compact handle
bar, working temperature ranges:
between -15C and +150C, valve body:
hot pressed brass OT 58, handle bar:
aluminium, ball: hard chrome plated hot
pressed brass OT 58, seal: Teflon, stem:
hot pressed brass OT 58; O-ring: Teflon,
stem seal: hot pressed brass OT 58
Disignation DN Connection thread (BSP) Pressure (bar)
BKR 06 ND K 6 G 1/4 50
BKR 10 ND K 10 G 3/8 50
BKR 13 ND K 13 G 1/2 50
BKR 20 ND K 20 G 3/4 40
BKR 25 ND K 25 G 1 40
BKR ND
Female BSP thread, seal necessary, take
thread depth into consideration, low
pressure ranges, 2-and 3-ways ball valve,
hot-pressed brass nickel-plated, working
temperature ranges: between -15C and
+150C, valve body: hot-pressed brass OT
58, handle bar: aluminium, ball: chrome
plated hot-pressed brass OT 58, seal:
Teflon, stem: hot pressed brass OT 58,
O-ring: teflon, stem seal: hot-pressed
brass OT 58
BKR 06 ND 6 G 1/4 50
BKR 10 ND 10 G 3/8 50
BKR 13 ND 12 G 1/2 50
BKR 20 ND 20 G 3/4 40
BKR 25 ND 25 G 1 40
BKR 32 ND 32 G 11/4 30
BKR 40 ND 40 G 11/2 30
BKR 50 ND 50 G 2 25
BKR 65 ND 60 G 21/2 18
BKR 75 ND 75 G 3 16
BKR 100 ND 100 G 4 14
BKR ND ROV
Female BSP thread with thread depth for
tube connections according to DIN 2999,
working temperature ranges: between -
15C and +150C, valve body: hot-pressed
brass OT 58, handle bar: zinc-plated and
varnished steel, ball: chrome plated hot-
pressed brass OT 58, seal: pure teflon,
stem: hot pressed brass OT 58, O-ring:
Teflon, stem seal: brass OT 58, 2 O-ring:
NBR nitrilic rubber/ viton
BKR 06 ND ROV 6 G 1/4 50

BKR 10 ND ROV 10 G 3/8 50
BKR 13 ND ROV 13 G 1/2 50
BKR 20 ND ROV 20 G 3/4 40
BKR 25 ND ROV 25 G 1 40
BKR 32 ND ROV 32 G 11/4 30
BKR 40 ND ROV 40 G 11/2 30
BKR 50 ND ROV 50 G 2 25
BKR HR ND
Female BSP thread, nominal pressure as
well as thread depth have to be taken into
consideration, male BSP thread, flat sealing,
2-and 3-ways ball valve, nickel-plated hot-
pressed brass; working temperature ranges:
between -15C and +150C, valve body: hot-
pressed brass OT 58, handle bar: aluminium,
ball: chrome plated, hot-pressed brass OT 58,
seal: teflon, stem: hot pressed brass OT 58;
O-ring: Teflon, stem seal: brass OT 58
BKR 06 HR ND 6 G 1/4 50
BKR 10 HR ND 10 G 3/8 50
BKR 13 HR ND 13 G 1/2 50
BKR 20 HR ND 20 G 3/4 40
BKR 25 HR ND 25 G 1 40
BKR 32 HR ND 32 G 11/4 30
BKR 40 HR ND 40 G 11/2 30
BKR 50 HR ND 50 G 2 25
BKR ND DVGW
Female BSP thread, DVGW-licensed, yellow
key, thread depth according to DIN 2999;
working temperature ranges: between -15C
and +150C, water between 0 and +150C,
not applicable for vapour, valve body: hot
pressed brass OT 58, handle bar: zinc-plated
and varnished steel, ball: hard chrome plated
hot pressed brass OT 58, seal: pure teflon
(P.T.F.E), stem: brass OT 58, O-ring: NBR
nitrilic rubber/ viton
BKR 06 ND DVGW 6 G 1/4 50

BKR 10 ND DVGW 10 G 3/8 50
BKR 13 ND DVGW 13 G 1/2 50
BKR 20 ND DVGW 20 G 3/4 40
BKR 25 ND DVGW 25 G 1 40
BKR 32 ND DVGW 32 G 11/4 30
BKR 40 ND DVGW 40 G 11/2 30
BKR 50 ND DVGW 50 G 2 25
3 BKR ND L
3-way ball valve, female BSP thread,
sealing necessary, hot-pressed
nickle-plated brass, L-drill; working
temperature ranges: between -15C
and +150C, valve body: nickel-plated
brass OT 58, handle bar: aluminium,
red, ball: hard-chromed brass OT 58,
seals: teflon (P.T.F.E.), stem: brass OT
58, stem seal: viton
Disignation DN Connection thread (BSP) Nominal Pressure (bar)
3 BKR 06 ND L 6 G 1/4 25
3 BKR 10 ND L 10 G 3/8 25
3 BKR 13 ND L 13 G 1/2 25
3 BKR 20 ND L 20 G 3/4 25
3 BKR 25 ND L 25 G 1 25
3 BKR 32 ND L 32 G 11/4 25
3 BKR 40 ND L 40 G 11/2 25
3 BKR 50 ND L 50 G 2 25
3 BKR ND T
pressure range
3-way-ball valve, female BSP thread,
sealing necessary, hot-pressed nickle-
plated brass, T-drill; valve body:
nickel-plated brass OT 58, handle bar:
aluminium, red, ball: hard-chromed
brass OT 58, seals: teflon (P.T.F.E.),
stem: brass OT 58, stem seal: viton
3 BKR 06 ND T 6 G 1/4 25
3 BKR 10 ND T 10 G 3/8 25
3 BKR 13 ND T 13 G 1/2 25
3 BKR 20 ND T 20 G 3/4 25
3 BKR 25 ND T 25 G 1 25
3 BKR 32 ND T 32 G 11/4 25
3 BKR 40 ND T 40 G 11/2 25
3 BKR 50 ND T 50 G 2 25
BK GFS
Block ball valve, SAE counter
flange
Working pressure according to
ISO 6162.2. Flange dimensions
3000 psi
body: steel; ball: steel nickel pl.
Disignation DN Size Flange Pressure (bar)
BK GFS 20 20 12 3/4 315

BK GFS 25 25 16 1 315
BK GFS 32 32 20 11/4 250
SK GFS
Ball valve forged type
SAE counter flange
Flange dimensions: 3000 psi,
working pressure according to ISO
6162.2
POM; stem sealing: NBRM
SK GFS 32 32 20 11/4 250

SK GFS 40 40 24 11/2 200
SK GFS 50 50 32 2 200
BK GFS 6
Block ball valve, SAE counter
flange
6162.2
BK GFS 6 20 20 12 3/4 400

BK GFS 6 25 25 16 1 400
SK GFS 6
Ball valve forged type, SAE
counter flange
6162.2
Body: steel; ball: steel nickel pl.
ball sealing: POM
stem sealing: NBR
SK GFS 6 32 32 20 11/4 400

SK GFS 6 40 40 24 11/2 400
SK GFS 6 50 50 32 2 400
BK SF
Block ball valve
SAE flange
6162.2
Body: steel; ball: steel nickel pl.;
BK SF 20 20 12 3/4 315
BK SF 25 25 16 1 315
SK SF
SAE flange
Flange dimensions: 3000 psi, working
pressure according to ISO 6162.2
Body: steel
ball sealing: POM
stem sealing: NBR
SK SF 32 32 20 11/4 250
SK SF 40 40 24 11/2 200
SK SF 50 50 32 2 200
BK SF 6
Block ball valve
SAE flange
6162.2
Body: steel; ball: steel nickel pl.
BK SF 6 20 20 12 3/4 400
BK SF 6 25 25 16 1 400
SK SF 6
SAE flange
6162.2
SK SF 6 32 32 20 11/4 400
SK SF 6 40 40 24 11/2 400
SK SF 6 50 50 32 2 400
BK SF GFS
Block ball valve
SAE flange
6162.2
BK SF 20 GFS 20 12 3/4 315

BK SF 25 GFS 25 16 1 315
SK SF GFS
SAE counter flange
6162.2
Disignation DN Size Flange Nominal Pressure (bar)
SK SF 32 GFS 32 20 11/4 250

SK SF 40 GFS 40 24 11/2 200
SK SF 50 GFS 50 32 2 200
BK SF 6 GFS
Block ball valve
SAE counter flange, Flange
dimensions: 6000 psi, working
pressure according to ISO 6162.2
BK SF 620 GFS 20 12 3/4 400

BK SF 625 GFS 25 16 1 400
SK SF 6 GFS
SAE flange, Flange dimensions: 6000
psi, working pressure according to ISO
6162.2
Body: steel; ball: steel nickel pl.; stem:
steel zinc pl.; ball sealing: POM
stem sealing: NBR
SK SF 632 GFS 32 20 11/4 400

SK SF 640 GFS 40 24 11/2 400
SK SF 650 GFS 50 32 2 400
MF MG
Sliding socket
with female BSP thread,
no threaded depth for tube
connection according to DIN
2353; material: brass, valve body:
hot pressed brass, wheel: steel,
bonnet: brass OT 58, stem: brass
OT 58
Disignation DN Size Pressure (bar)
MF 06 MG 6 4 10
MF 10 MG 10 6 10
MF 13 MG 13 8 10
MF 20 MG 20 12 10
MF 25 MG 25 16 10
MF 32 MG 32 20 10
MF 40 MG 40 24 10
MF 50 MG 50 32 10
MF 65 MG 60 40 10
MF 75 MG 75 48 10
MF 100 MG 100 64 10
ND GRIFF
Spare handle bar
for low pressure ball valve
Disignation Dimension Inch
ND GRIFF DN 0613 6 bis 13 1/4-1/2

ND GRIFF DN 100 100 3-4
ND GRIFF DN 2025 20 bis 25 3/4-1
ND GRIFF DN 3240 32 bis 40 11/4-11/2
ND GRIFF DN 50 50 2
ND GRIFF DN 65 65 21/2
Index
3 B
3-way block ball valve 11-21 Ball valve forged type 41
3 BKHL L 16 Ball valve forged type 45
3 BKHL LK 11 Ball valve forged type 47
3 BKHL T 19 Ball valve forged type 49
3 BKHL TK 12 Ball valve forged type 51
3 BKHS L 17 Ball valve forged type,
3 BKHS LK 13 SAE counter flange 43
3 BKHS T 20 BKHL 6
3 BKR L 18 BKHL A 7
3 BKR LK 14 BKHS 8
3 BKR ND L 38 BKN 9
3 BKR ND T 39 BKR 10
3 BKR T 21 BKR HR ND 36
3 BKR TK 15 BKR ND 34
BKR ND DVGW 37
BKR ND K 33
4
4-way block ball valve 22-30 BKR ND ROV 35
4 BKHL L 22 BK ALU GRIFF SW 31
4 BKHL T 25 BK GEKR GRIFF SW 32
4 BKHL X 28 BK GFS 40
4 BKHS L 23 BK GFS 6 42
4 BKHS T 26 BK SF 44
4 BKHS X 29 BK SF 6 46
4 BKR L 24 BK SF 6 GFS 50
4 BKR T 27 BK SF GFS 48
4 BKR X 30 Block ball valve 10

Index
Block ball valve 44 N

Block ball valve 46 ND GRIFF 53
Block ball valve 48
Block ball valve 50 S
Block ball valve, SAE counter flange 40 SK GFS 41
Block ball valve, SAE counter flange 42 SK GFS 6 43
Block ball valve BKH 6-9 SK SF 45
Block ball valve for lower SK SF 6 47
pressure range, brass 33-38
SK SF 6 GFS 51
Block ball valve for lower pressure range 39
SK SF GFS 49
Sliding socket 52
H Spare handle bar 53
Handle bar for ball valve 31-32
M
MF MG 52

03 Ball Valves and Couplings 1

Uploaded by

Copyright:

Available Formats

03 Ball Valves and Couplings 1

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

03 Ball Valves and Couplings 1

Uploaded by

Copyright:

Available Formats

Technical Information

Ball valves for high pressure applications

Body Free cutting steel, brown-finished*

Sealing, stem NBR

Stem Free cutting steel, galvanised

Sealing, ball Polyamide / POM

Ball Free cutting steel, chrome plated

* also galvanised body available upon request

Standard switching positions:

3/2 with L-bore, 0 90

3/2 with T-bore, 0 90

Manifold ball valves

Standard position Switching position Intermediate position

3/2 with L bore, 0-90

3/2 with T bore, 0-90

4/3 with L bore, 0-45- 90

4/3 with T bore, 0-45- 90

4/2 with X bore, 0-90

Ball Hot pressed brass MS 58 chrome-plated

Stem Hot pressed brass MS 58 MS 58

Handle bar Steel, galvanised

Handle Aluminium (red, yellow DVGW*)

Bolt Steel, galvanised

* German Technical and Scientific Association on Gas and Water

Disignation DN D Tube O.D. Nominal Pressure (bar)

BKHL 04 4 M 12x1,5 6 500

Disignation DN D Tube O.D. Nominal Pressure (bar)

BKHL 10 A 10 M 18x1,5 12 500

Disignation DN D Tube O.D. Nominal Pressure (bar)

BKHS 04 4 M 16x1,5 8 500

Disignation DN Connection thread IG-NPT Nominal Pressure (bar)

BKN 06 6 1/4 500

Disignation DN Connection thread IG-NPT Nominal Pressure (bar)

BKR 04 4 1/8 500

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHL 04 L K 4 M 12x1,5 6 400

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHL 08 T K 8 M 16x1,5 10 400

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHS 04 L K 4 M 16x1,5 8 500

Disignation DN Connection thread IG Pressure (bar)

3 BKR 04 L K 4 G 1/8 400

Disignation DN Connection thread IG Nominal Pressure (bar)

3 BKR 10 T K 10 G 3/8 350

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHL 04 L 4 M 12x1,5 6 500

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHS 04 L 4 M 16x1,5 8 500

Disignation DN Connection thread IG Nominal Pressure (bar)

3 BKR 04 L 4 G 1/8 500

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHL 04 T 4 M 12x1,5 6 500

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

3 BKHS 04 T 4 M 16x1,5 8 500

Disignation DN Connection thread IG Nominal Pressure (bar)

3 BKR 04 T 4 G 1/8 500

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)

4 BKHL 04 L 4 M 12x1,5 6 500

Disignation DN Connection thread IG Tube O.D. Nominal Pressure (bar)