Scribd
Upload
112 views

Experiment No 5: Objective: To Draw Input and Output Characteristics of An NPN Transistor in Common Base Configuration

The document describes an experiment to draw the input and output characteristics of an NPN transistor in common base configuration. The circuit diagram and procedure are provided. Observations of input characteristics as VEE is varied from 3-7V and output characteristics as VCC is varied from 1-5V are recorded. The objective was to understand the relationships between the input voltages and currents and output voltages and currents of the NPN transistor.

Uploaded by

Muhammad Junaid Tabassum
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
112 views

Experiment No 5: Objective: To Draw Input and Output Characteristics of An NPN Transistor in Common Base Configuration

The document describes an experiment to draw the input and output characteristics of an NPN transistor in common base configuration. The circuit diagram and procedure are provided. Observations of input characteristics as VEE is varied from 3-7V and output characteristics as VCC is varied from 1-5V are recorded. The objective was to understand the relationships between the input voltages and currents and output voltages and currents of the NPN transistor.

Uploaded by

Muhammad Junaid Tabassum
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

EXPERIMENT No 5

Objective: To draw input and output characteristics of an NPN


transistor in common base configuration.
Apparatus:
DC Power Supplies 02
NPN Transistor 01
Digital Multimeter 01
Resistors

Circuit Diagram:

RE Rc
c

Vcc
VEE

Procedure:
1. Take an NPN transistor.
2. Check its base emitter and collector with DMM.
3. Fix it on project board.
4. Make a circuit as circuit diagram.
5. Note different readings for input and output characteristics
Industrial electronics lab manual
Observations:

INPUT CHARACTRISTICS

VEE (V) VBE (V) IE (ma)

3 0.7 2.3
5 0.7 4.3
7 0.7 6.3

OUTPUT CHARACTRISTICS

VCC 1 2 3 4 5
(V)
IE
1 VCB 0.667 0.692 0.712 0.727 0.740
mA Ic 0.333 1.308 2.288 3.273 4.260
2 VCB 0.691 0.710 0.726 0.739 0.750
mA Ic 0.309 1.290 2.280 3.260 4.250
3 VCB 0.710 0.725 0.737 0.748 0.757
mA Ic 0.290 1.275 2.263 3.252 4.243
4 VCB 0.732 0.743 0.749 0.759 0.768
mA Ic 0.272 1.258 2.250 3.240 4.231

Conclusion;

Industrial electronics lab manual

You might also like