Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Manual Fiat Doblo

    Uploaded by

    cristi
    This document provides installation instructions for a car alarm system in a Fiat Doblo, including: 1. Install the compact central units and sirens in the engine compartment and under the dashboard. 2. Connect the power supply wires to the fuse box and battery. 3. The vehicle has an original engine immobilizer activated by removing the ignition key. 4. Additional connections include central locking, turning indicators, door sensors, bonnet sensor, and connections for the alarm control unit. 5. Warnings are provided that the information is indicative and vehicle manufacturers may make modifications, so connections should be verified before installation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Manual Fiat Doblo

    Uploaded by

    cristi
    2K views2 pages
    This document provides installation instructions for a car alarm system in a Fiat Doblo, including: 1. Install the compact central units and sirens in the engine compartment and under the dashboard. 2. Connect the power supply wires to the fuse box and battery. 3. The vehicle has an original engine immobilizer activated by removing the ignition key. 4. Additional connections include central locking, turning indicators, door sensors, bonnet sensor, and connections for the alarm control unit. 5. Warnings are provided that the information is indicative and vehicle manufacturers may make modifications, so connections should be verified before installation.

    Original Description:

    manual si schema electrica fiat doblo

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides installation instructions for a car alarm system in a Fiat Doblo, including: 1. Install the compact central units and sirens in the engine compartment and under the dashboard. 2. Connect the power supply wires to the fuse box and battery. 3. The vehicle has an original engine immobilizer activated by removing the ignition key. 4. Additional connections include central locking, turning indicators, door sensors, bonnet sensor, and connections for the alarm control unit. 5. Warnings are provided that the information is indicative and vehicle manufacturers may make modifications, so connections should be verified before installation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views2 pages

    Manual Fiat Doblo

    Uploaded by

    cristi
    This document provides installation instructions for a car alarm system in a Fiat Doblo, including: 1. Install the compact central units and sirens in the engine compartment and under the dashboard. 2. Connect the power supply wires to the fuse box and battery. 3. The vehicle has an original engine immobilizer activated by removing the ignition key. 4. Additional connections include central locking, turning indicators, door sensors, bonnet sensor, and connections for the alarm control unit. 5. Warnings are provided that the information is indicative and vehicle manufacturers may make modifications, so connections should be verified before installation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CAR ALARM META SERVICE

    TYPE OF CAR AND YEAR OF MANUFACTURE SHEET NO.


    FIAT DOBLO 11.40
    INSTALLATION POSITION
    Compact central units and sirens: install in the engine compartment on the drivers side, on the battery support for versions with
    ABS; above the servobrake for other versions.
    Central control units and accessories: under the dashboard on the drivers side.

    POWER SUPPLY
    Positive: connect to the red/black wire (position N 7) in the 20-pin green connector in the rear part of the fuse box.
    Positive power supply for the turning indicators: connect to the red/green wire in the 36-pin light blue connector in the rear part of
    the fuse box.
    Negative: connect to the black wire (position N 10) in the 20-pin green connector in the rear part of the fuse box.

    ENGINE IMMOBILISATION
    The vehicle is equipped with an original engine immobiliser with transponder that activates automatically when the
    ignition key is removed from the ignition switch.

    KEY POSITIVE (+15)


    Connect to the blue wire (position N 11) in the 20-pin green connector in the rear part of the fuse box.

    CENTRAL LOCKING
    Negative command.
    Connect to the white/brown wire (position N 34) for locking and to the light blue/blue wire (position N 24) for unlocking in the
    40-pin black connector in the front part of the fuse box.

    TURNING INDICATORS
    Connect to the green wire (position N 13) and pink/white wire (position N 2) in the 40-pin black connector in the front part of
    the fuse box.
    Negative command for the turning indicators (for M750/7): connect to the red/yellow wire (position N 34) in the 36-pin light
    blue connector in the rear part of the fuse box.

    DOOR PROTECTION
    Connect to the white/pink wire (position N 8), the white/brown wire (position N 25), the white/purple wire (position N 16) and
    the white/purple wire (position N 26) in the 40-pin black connector in the front part of the fuse box.
    NOTE: separate the lines with 4 diodes.

    BONNET PROTECTION
    Bonnet: use the button in the kit.
    Boot: connect to the red/green wire (position N 36) in the 40-pin black connector in the front part of the fuse box.

    PASSIVE ANTI-THEFT DEVICE ACTUATION


    Install alarm control unit M750/7 as indicated in installation ANNEX 11.40.1

    THE INFORMATION GIVEN IN THE MANUAL IS PURELY INDICATIVE AND SHOULD BE VERIFIED BEFORE MAKING
    ANY CONNECTIONS AS THE CAR MANUFACTURERS MAY MAKE MODIFICATIONS WITHOUT PRIOR NOTICE. META
    SYSTEM DECLINES ANY LIABILITY FOR DAMAGE TO THE VEHICLE CAUSED BY INCORRECT INSTALLATION.
    CAR ALARM META SERVICE
    TYPE OF CAR AND YEAR OF MANUFACTURE ENCLOSURE

    FIAT DOBLO 11.40.1

    INSTALLATION ANNEX M750/7 electronic key

    Function M750 wire color Vehicle Wire Colour Location in vehicle

    Arming command grey pink/white directly to the 40-pin black


    connector (LN) on the
    front of the shunt box.

    NOTE: install a diode on


    the two lines of the rh and

    AH
    LL

    AV
    FRONT VIEW OF THE SHUNTING PLANT

    GR
    EE
    N 31 40 LN
    PI
    NK
    /W
    HI Diodes 6A
    TE
    13

    1 10
    2

    M750/7
    GREY
    LN

    7
    Black connector

    THE INFORMATION GIVEN IN THE MANUAL IS PURELY INDICATIVE AND SHOULD BE VERIFIED BEFORE MAKING
    ANY CONNECTIONS AS THE CAR MANUFACTURERS MAY MAKE MODIFICATIONS WITHOUT PRIOR NOTICE. META
    SYSTEM DECLINES ANY LIABILITY FOR DAMAGE TO THE VEHICLE CAUSED BY INCORRECT INSTALLATION.

    You might also like