Scribd
Upload
84 views

T200A Test Functions

This document describes the functions of various modules that can be used to test protective relays. Module 1 can test overcurrent, undercurrent, directional overcurrent, directional voltage, directional power, overvoltage, undervoltage, harmonics, differential, synchronism, directional, DC, motor overload, and thermal relays. Module 2 can manually control AC variables for testing. Module 3 supports timer functions. Module 4 can perform primary side injection, ratio, polarity, and winding resistance tests on current transformers. Module 5 allows review of up to 30 test reports. Module 6 sets rated voltage and frequency parameters and Module 7 provides auxiliary DC power.

Uploaded by

prabhu_natarajan_n
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views

T200A Test Functions

This document describes the functions of various modules that can be used to test protective relays. Module 1 can test overcurrent, undercurrent, directional overcurrent, directional voltage, directional power, overvoltage, undervoltage, harmonics, differential, synchronism, directional, DC, motor overload, and thermal relays. Module 2 can manually control AC variables for testing. Module 3 supports timer functions. Module 4 can perform primary side injection, ratio, polarity, and winding resistance tests on current transformers. Module 5 allows review of up to 30 test reports. Module 6 sets rated voltage and frequency parameters and Module 7 provides auxiliary DC power.

Uploaded by

prabhu_natarajan_n
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SN.

Module type Functions Relays can be tested


1 Overcurrent relays
Trip time test, trip time and pulse length test with I2&U2.
Undercurrent relays
Pick up test
Directional overcurrent relays (U2&I2)
Reclosing
Directional voltage relays (U2&I2)
Under frequency test
Directional power relays (U2&I2)
Differential test
Relay test Overvoltage relays
Harmonics test
Undervoltage relays
Synchronism Test
Harmonics with differential relay(I2)
Directional test
Differential relay
DC relay, mA level; AC & DC test
Synchronism relay
Motor overload test
Motor overload protection (I2)
2 Thermal relays
Manually control the amplitude, phase of AC variables.
Any Test Automatic reclosing devices
Shot, linear ramp, pulse ramp
df/dt relay (U2&I2)
Time-delay relays(U2&I2)
3 Timer Support
Timer (Binary input)
4 Primary side injection (Use manual control)
Ratio test
CT test Polarity test Basic CT test functions
Winding resistance test
Excitation curve test
5 Report Reviewing the report 30 results can be stored
6 System setting Set rated voltage and frequency /
7 Aux DC Provide power supply Provide power supply to relay or other equipment
8 PC control The test results can be transferred to external PC via USB port. Optional

You might also like