Friday, February 20, 2015, 09:22 AM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries4 *
* Version 20.07.09.31 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= FEB 20, 2015 *
* Time= 9:21:20 *
* *
* USER ID: Japos Engineering *
****************************************************

1. STAAD SPACE
INPUT FILE: FINAL ANALYSIS_DADO.STD
2. START JOB INFORMATION
3. ENGINEER DATE 20-FEB-15
4. JOB NAME PROPOSED 3-STOREY 3-UNIT TOWNHOUSE
5. JOB CLIENT DIOSDADO LINDEL BANCASO
6. JOB REV 2.1
7. JOB PART FRAMING
8. JOB COMMENT REVISION OF THE COLLUMN SND BEAM
9. ENGINEER NAME JSJ
10. END JOB INFORMATION
11. INPUT WIDTH 79
12. UNIT METER KN
13. JOINT COORDINATES
14. 1 0 0 0; 2 0 0 3.2; 3 0 0 6.7; 4 0 0 10.2; 5 0 0 13.3; 6 4 0 0; 7 4 0 3.2
15. 8 4 0 6.7; 9 4 0 10.2; 10 4 0 13.3; 11 7.9 0 0; 12 7.9 0 3.2; 13 7.9 0 6.7
16. 14 7.9 0 10.2; 15 7.9 0 13.3; 16 11.9 0 0; 17 11.9 0 3.2; 18 11.9 0 6.7
17. 19 11.9 0 10.2; 20 11.9 0 13.3; 21 0 -1.5 0; 22 0 -1.5 3.2; 23 0 -1.5 6.7
18. 24 0 -1.5 10.2; 25 0 -1.5 13.3; 26 4 -1.5 0; 27 4 -1.5 3.2; 28 4 -1.5 6.7
19. 29 4 -1.5 10.2; 30 4 -1.5 13.3; 31 7.9 -1.5 0; 32 7.9 -1.5 3.2
20. 33 7.9 -1.5 6.7; 34 7.9 -1.5 10.2; 35 7.9 -1.5 13.3; 36 11.9 -1.5 0
21. 37 11.9 -1.5 3.2; 38 11.9 -1.5 6.7; 39 11.9 -1.5 10.2; 40 11.9 -1.5 13.3
22. 41 0 3 0; 42 0 3 3.2; 43 0 3 6.7; 44 0 3 10.2; 45 0 3 13.3; 46 4 3 0
23. 47 4 3 3.2; 48 4 3 6.7; 49 4 3 10.2; 50 4 3 13.3; 51 7.9 3 0; 52 7.9 3 3.2
24. 53 7.9 3 6.7; 54 7.9 3 10.2; 55 7.9 3 13.3; 56 11.9 3 0; 57 11.9 3 3.2
25. 58 11.9 3 6.7; 59 11.9 3 10.2; 60 11.9 3 13.3; 61 0 3 14.3; 62 4 3 14.3
26. 63 7.9 3 14.3; 64 11.9 3 14.3; 65 1.4 3 3.2; 66 1.4 3 6.7; 67 5.4 3 3.2
27. 68 5.4 3 6.7; 69 9.3 3 3.2; 70 9.3 3 6.7; 71 4 3 4.8; 72 7.9 3 4.8
28. 73 11.9 3 4.8; 74 1.4 3 4.8; 75 5.4 3 4.8; 76 9.3 3 4.8; 77 0 6 0; 78 0 6 3.2
29. 79 0 6 6.7; 80 0 6 10.2; 81 0 6 13.3; 82 4 6 0; 83 4 6 3.2; 84 4 6 6.7
30. 85 4 6 10.2; 86 4 6 13.3; 87 7.9 6 0; 88 7.9 6 3.2; 89 7.9 6 6.7
31. 90 7.9 6 10.2; 91 7.9 6 13.3; 92 11.9 6 0; 93 11.9 6 3.2; 94 11.9 6 6.7
32. 95 11.9 6 10.2; 96 11.9 6 13.3; 97 0 6 14.3; 98 4 6 14.3; 99 7.9 6 14.3
33. 100 11.9 6 14.3; 101 1.4 6 3.2; 102 1.4 6 6.7; 103 5.4 6 3.2; 104 5.4 6 6.7
34. 105 9.3 6 3.2; 106 9.3 6 6.7; 107 4 6 4.8; 108 7.9 6 4.8; 109 11.9 6 4.8
35. 110 1.4 6 4.8; 111 5.4 6 4.8; 112 9.3 6 4.8; 113 0 9 0; 114 0 9 3.2
36. 115 0 9 6.7; 116 0 9 10.2; 117 0 9 13.3; 118 4 9 0; 119 4 9 3.2; 120 4 9 6.7
37. 121 4 9 10.2; 122 4 9 13.3; 123 7.9 9 0; 124 7.9 9 3.2; 125 7.9 9 6.7
38. 126 7.9 9 10.2; 127 7.9 9 13.3; 128 11.9 9 0; 129 11.9 9 3.2; 130 11.9 9 6.7

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 1 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 2

39. 131 11.9 9 10.2; 132 11.9 9 13.3; 133 0 9 14.3; 134 4 9 14.3; 135 7.9 9 14.3
40. 136 11.9 9 14.3; 137 1.4 9 3.2; 138 1.4 9 6.7; 139 5.4 9 3.2; 140 5.4 9 6.7
41. 141 9.3 9 3.2; 142 9.3 9 6.7; 143 4 9 4.8; 144 7.9 9 4.8; 145 11.9 9 4.8
42. MEMBER INCIDENCES
43. 1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 6 7; 6 7 8; 7 8 9; 8 9 10; 9 11 12; 10 12 13
44. 11 13 14; 12 14 15; 13 16 17; 14 17 18; 15 18 19; 16 19 20; 17 1 6; 18 6 11
45. 19 11 16; 20 2 7; 21 7 12; 22 12 17; 23 3 8; 24 8 13; 25 13 18; 26 5 10
46. 27 10 15; 28 15 20; 29 1 21; 30 6 26; 31 11 31; 32 16 36; 33 17 37; 34 12 32
47. 35 7 27; 36 2 22; 37 3 23; 38 8 28; 39 13 33; 40 18 38; 41 19 39; 42 14 34
48. 43 9 29; 44 4 24; 45 5 25; 46 10 30; 47 15 35; 48 20 40; 49 41 42; 50 42 43
49. 51 43 44; 52 44 45; 53 46 47; 54 47 71; 55 48 49; 56 49 50; 57 51 52; 58 52 72
50. 59 53 54; 60 54 55; 61 56 57; 62 57 73; 63 58 59; 64 59 60; 65 41 46; 66 46 51
51. 67 51 56; 68 42 65; 69 47 67; 70 52 69; 71 43 66; 72 48 68; 73 53 70; 74 45 50
52. 75 50 55; 76 55 60; 77 44 49; 78 49 54; 79 54 59; 80 61 62; 81 62 63; 82 63 64
53. 83 45 61; 84 50 62; 85 55 63; 86 60 64; 87 65 47; 88 66 48; 89 67 52; 90 68 53
54. 91 69 57; 92 70 58; 93 65 74; 94 67 75; 95 69 76; 96 71 48; 97 72 53; 98 73 58
55. 99 74 66; 100 75 68; 101 76 70; 102 74 71; 103 75 72; 104 76 73; 105 41 1
56. 106 46 6; 107 51 11; 108 56 16; 109 57 17; 110 52 12; 111 47 7; 112 42 2
57. 113 43 3; 114 48 8; 115 53 13; 116 58 18; 117 44 4; 118 49 9; 119 54 14
58. 120 59 19; 121 60 20; 122 55 15; 123 50 10; 124 45 5; 137 77 78; 138 78 79
59. 139 79 80; 140 80 81; 141 82 83; 142 83 107; 143 84 85; 144 85 86; 145 87 88
60. 146 88 108; 147 89 90; 148 90 91; 149 92 93; 150 93 109; 151 94 95; 152 95 96
61. 153 77 82; 154 82 87; 155 87 92; 156 78 101; 157 83 103; 158 88 105
62. 159 79 102; 160 84 104; 161 89 106; 162 81 86; 163 86 91; 164 91 96; 165 80 85
63. 166 85 90; 167 90 95; 168 97 98; 169 98 99; 170 99 100; 171 81 97; 172 86 98
64. 173 91 99; 174 96 100; 175 101 83; 176 102 84; 177 103 88; 178 104 89
65. 179 105 93; 180 106 94; 181 101 110; 182 103 111; 183 105 112; 184 107 84
66. 185 108 89; 186 109 94; 187 110 102; 188 111 104; 189 112 106; 190 110 107
67. 191 111 108; 192 112 109; 193 77 41; 194 82 46; 195 87 51; 196 92 56
68. 197 93 57; 198 88 52; 199 83 47; 200 78 42; 201 79 43; 202 84 48; 203 89 53
69. 204 94 58; 205 80 44; 206 85 49; 207 90 54; 208 95 59; 209 96 60; 210 91 55
70. 211 86 50; 212 81 45; 225 113 114; 226 114 115; 227 115 116; 228 116 117
71. 229 118 119; 230 119 143; 231 120 121; 232 121 122; 233 123 124; 234 124 144
72. 235 125 126; 236 126 127; 237 128 129; 238 129 145; 239 130 131; 240 131 132
73. 241 113 118; 242 118 123; 243 123 128; 244 114 137; 245 119 139; 246 124 141
74. 247 115 138; 248 120 140; 249 125 142; 250 117 122; 251 122 127; 252 127 132
75. 253 116 121; 254 121 126; 255 126 131; 256 133 134; 257 134 135; 258 135 136
76. 259 117 133; 260 122 134; 261 127 135; 262 132 136; 263 137 119; 264 138 120
77. 265 139 124; 266 140 125; 267 141 129; 268 142 130; 272 143 120; 273 144 125
78. 274 145 130; 281 113 77; 282 118 82; 283 123 87; 284 128 92; 285 129 93
79. 286 124 88; 287 119 83; 288 114 78; 289 115 79; 290 120 84; 291 125 89
80. 292 130 94; 293 116 80; 294 121 85; 295 126 90; 296 131 95; 297 132 96
81. 298 127 91; 299 122 86; 300 117 81; 313 61 97; 314 62 98; 315 63 99
82. 316 64 100; 317 97 133; 318 98 134; 319 99 135; 320 100 136
83. ELEMENT INCIDENCES SHELL
84. 125 56 57 52 51; 126 51 52 47 46; 127 46 47 42 41; 128 58 59 54 53
85. 129 53 54 49 48; 130 48 49 44 43; 131 59 60 55 54; 132 54 55 50 49
86. 133 49 50 45 44; 134 60 64 63 55; 135 55 63 62 50; 136 50 62 61 45
87. 213 92 93 88 87; 214 87 88 83 82; 215 82 83 78 77; 216 94 95 90 89
88. 217 89 90 85 84; 218 84 85 80 79; 219 95 96 91 90; 220 90 91 86 85
89. 221 85 86 81 80; 222 96 100 99 91; 223 91 99 98 86; 224 86 98 97 81
90. 301 128 129 124 123; 302 123 124 119 118; 303 118 119 114 113
91. 304 130 131 126 125; 305 125 126 121 120; 306 120 121 116 115
92. 307 131 132 127 126; 308 126 127 122 121; 309 121 122 117 116
93. 310 132 136 135 127; 311 127 135 134 122; 312 122 134 133 117
94. 321 129 130 125 124; 322 124 125 120 119; 323 119 120 115 114

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 2 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 3

95. ELEMENT PROPERTY

96. 125 TO 136 213 TO 224 301 TO 312 321 TO 323 THICKNESS 0.15
97. DEFINE MATERIAL START
98. ISOTROPIC CONCRETE
99. E 2.17185E+007
100. POISSON 0.17
101. DENSITY 23.5616
102. ALPHA 1E-005
103. DAMP 0.05
104. TYPE CONCRETE
105. STRENGTH FCU 27579
106. END DEFINE MATERIAL
107. MEMBER PROPERTY AMERICAN
108. 29 TO 48 105 TO 124 193 TO 212 281 TO 300 313 TO 320 PRIS YD 0.5 ZD 0.25
109. 49 TO 104 137 TO 192 PRIS YD 0.45 ZD 0.25
110. 225 TO 268 272 TO 274 PRIS YD 0.35 ZD 0.2
111. 1 TO 28 PRIS YD 0.3 ZD 0.2
112. CONSTANTS
113. BETA 90 MEMB 29 TO 48 105 TO 124 193 TO 212 281 TO 300 313 TO 320
114. MATERIAL CONCRETE ALL
115. SUPPORTS
116. 21 TO 40 FIXED
117. LOAD 1 LOADTYPE DEAD TITLE DEAD LOAD
118. SELFWEIGHT Y -1
119. ELEMENT LOAD
120. 125 TO 136 213 TO 224 PR GY -2.5
121. LOAD 2 LOADTYPE LIVE TITLE LIVE LOAD
122. ELEMENT LOAD
123. 125 TO 136 213 TO 224 PR GY -2.3
124. 301 TO 312 321 TO 323 PR GY -1.
125. LOAD 3 LOADTYPE WIND TITLE WIND LOAD
126. JOINT LOAD
127. 61 113 133 FX 7.08
128. 1 5 41 77 97 114 TO 117 FX 14.16
129. 2 TO 4 42 TO 45 78 TO 81 FX 28.32
130. LOAD COMB 4 DL + LL
131. 1 1.4 2 1.7
132. LOAD COMB 5 DL + LL + WL
133. 1 1.2 3 1.6 2 0.5
134. PERFORM ANALYSIS PRINT STATICS CHECK

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 145 NUMBER OF MEMBERS 275

NUMBER OF PLATES 39 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 20

SOLVER USED IS THE IN-CORE ADVANCED SOLVER

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 3 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 4

TOTAL PRIMARY LOAD CASES = 3, TOTAL DEGREES OF FREEDOM = 750

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 4 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 5

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

LOADTYPE DEAD TITLE DEAD LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.594901954E+01
Y = 0.516971245E+01
Z = 0.749488079E+01

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -3974.48
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 29788.26 MY= 0.00 MZ= -23644.26

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 3974.48
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -29788.26 MY= 0.00 MZ= 23644.26

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)

MAXIMUMS AT NODE
X = 2.06439E-03 113
Y = -7.89357E-02 135
Z = 4.89115E-02 136
RX= 2.63818E-04 63
RY= -6.99319E-06 61
RZ= 1.58016E-04 109

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 2

LOADTYPE LIVE TITLE LIVE LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.594999993E+01
Y = 0.550578292E+01
Z = 0.770360946E+01

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 5 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 6

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -761.36
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 5865.24 MY= 0.00 MZ= -4530.10

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 761.36
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -5865.24 MY= 0.00 MZ= 4530.10

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 2)

MAXIMUMS AT NODE
X = -2.40042E-04 4
Y = -1.69576E-02 126
Z = 6.27542E-03 136
RX= 4.15270E-05 63
RY= -9.07464E-07 61
RZ= -1.70536E-05 138

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 3

LOADTYPE WIND TITLE WIND LOAD

CENTER OF FORCE BASED ON X FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.000000000E+00
Y = 0.410769232E+01
Z = 0.766461545E+01

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCE-X = 460.20
SUMMATION FORCE-Y = 0.00
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.00 MY= 3527.26 MZ= -1890.36

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCE-X = -460.20
SUMMATION FORCE-Y = 0.00
SUMMATION FORCE-Z = 0.00

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 6 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 7

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.00 MY= -3527.26 MZ= 1890.36

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 3)

MAXIMUMS AT NODE
X = 1.12868E+00 133
Y = -1.95669E-02 66
Z = 7.77184E-02 133
RX= 1.62073E-04 5
RY= 2.38168E-04 71
RZ= -2.46415E-03 4

************ END OF DATA FROM INTERNAL STORAGE ************

135. START CONCRETE DESIGN

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 7 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 8

136. CODE ACI

137. DESIGN COLUMN 29 TO 48 105 TO 124 193 TO 212 281 TO 300 313 TO 320

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 8 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 9

====================================================================

COLUMN NO. 29 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1425.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 30 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 31 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 9 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 10

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 32 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 33 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 34 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 10 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 11

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 35 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 36 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1600.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 37 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 11 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 12

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1775.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 25 MM 1.571 5 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 38 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1337.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

12 - 12 MM 1.086 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

====================================================================

COLUMN NO. 39 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 12 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 13

====================================================================

COLUMN NO. 40 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 41 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 42 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 13 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 14

====================================================================

COLUMN NO. 43 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 44 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 3000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 32 MM 2.574 5 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 45 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1687.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 14 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 15

4 - 25 MM 1.571 5 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 46 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1425.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 47 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 48 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 15 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 16

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 105 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1337.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

12 - 12 MM 1.086 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

====================================================================

COLUMN NO. 106 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1337.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

12 - 12 MM 1.086 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

====================================================================

COLUMN NO. 107 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 16 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 17

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1425.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 108 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 109 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 17 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 18

====================================================================

COLUMN NO. 110 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1337.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

12 - 12 MM 1.086 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

====================================================================

COLUMN NO. 111 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 112 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 18 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 19

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 113 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1425.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 114 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1512.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 115 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1600.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 19 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 20

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 116 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1425.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 16 MM 1.287 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 117 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 118 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 20 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 21

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 119 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 120 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 21 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 22

====================================================================

COLUMN NO. 121 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1775.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 25 MM 1.571 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 192.00 MM

====================================================================

COLUMN NO. 122 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 2037.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

8 - 20 MM 2.011 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 123 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1775.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 25 MM 1.571 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 22 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 23

TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 124 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

AREA OF STEEL REQUIRED = 1687.5 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 25 MM 1.571 5 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 193 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 194 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 23 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 24

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 195 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 196 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 197 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 24 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 25

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 198 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 199 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 25 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 26

====================================================================

COLUMN NO. 200 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 201 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 202 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 26 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 27

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 203 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 204 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 205 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 27 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 28

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 206 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 207 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 28 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 29

====================================================================

COLUMN NO. 208 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 209 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 210 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 29 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 30

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 211 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 212 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 281 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 30 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 31

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 282 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 283 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 31 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 32

====================================================================

COLUMN NO. 284 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 285 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 286 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 32 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 33

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 287 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 288 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 289 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 33 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 34

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 290 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 291 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 34 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 35

====================================================================

COLUMN NO. 292 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 293 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 294 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 35 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 36

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 295 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 296 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 297 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 36 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 37

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 298 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 299 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 37 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 38

====================================================================

COLUMN NO. 300 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 313 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 314 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 38 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 39

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 315 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 316 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 317 DESIGN PER ACI 318-08 - AXIAL + BENDING

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 39 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 40

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 318 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

====================================================================

COLUMN NO. 319 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 40 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 41

====================================================================

COLUMN NO. 320 DESIGN PER ACI 318-08 - AXIAL + BENDING

FY - 413.7 FC - 27.6 MPA, RECT SIZE - 250.0 X 500.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1250.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.005 1 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

********************END OF COLUMN DESIGN RESULTS********************

138. DESIGN BEAM 1 TO 28 49 TO 104 137 TO 192 225 TO 268 272 TO 274

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 41 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 42

=====================================================================

BEAM NO. 1 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2471. YES NO

2 243. 2 - 12MM 0. 875. YES NO
3 243. 2 - 12MM 1392. 3200. NO YES

B E A M N O. 1 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.77 KNS Vc= 41.16 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.09 KNS Vc= 40.87 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 1J____________________ 3200X 200X 300_____________________ 2J____

| |
||=================== ==========================================||
| 2No12 H 243. 0.TO 875 2No12 H 243.1392.TO 3200 |
| |
| 2No12 H 57. 0.TO 2471 |
||========================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 42 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 43

=====================================================================

BEAM NO. 2 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2681. YES NO

2 243. 2 - 12MM 0. 925. YES NO
3 243. 2 - 12MM 1263. 3500. NO YES

B E A M N O. 2 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.98 KNS Vc= 40.93 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.30 KNS Vc= 40.74 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 2J____________________ 3500X 200X 300_____________________ 3J____

| |
||=================== ================================================||
| 2No12 H 243. 0.TO 925 2No12 H 243.1263.TO 3500 |
| |
| 2No12 H 57. 0.TO 2681 |
||========================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 43 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 44

=====================================================================

BEAM NO. 3 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2682. YES NO

2 243. 2 - 12MM 0. 925. YES NO
3 243. 2 - 12MM 1263. 3500. NO YES

B E A M N O. 3 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.19 KNS Vc= 40.43 KNS Vs= 0.00 KNS
Tu= 1.63 KN-MET Tc= 1.2 KN-MET Ts= 2.2 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.84 SQ.CM.

AT END SUPPORT - Vu= 4.94 KNS Vc= 40.59 KNS Vs= 0.00 KNS
Tu= 1.63 KN-MET Tc= 1.2 KN-MET Ts= 2.2 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.84 SQ.CM.

___ 3J____________________ 3499X 200X 300_____________________ 4J____

| |
||=================== ================================================||
| 2No12 H 243.| |0.TO 925 2No12 H 243.1263.TO 3500| | | | |
| 20*12c/c 81 | | | | | | | | | | | | | | | | | | | | 20*12c/c 81 |
| 2No12 H |57.| |0.TO 2682 | | | | | | | | | | | | | | | | |
||========================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 44 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 45

=====================================================================

BEAM NO. 4 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2401. YES NO

2 243. 2 - 12MM 0. 858. YES NO
3 243. 2 - 12MM 1079. 3100. NO YES

B E A M N O. 4 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.83 KNS Vc= 40.47 KNS Vs= 0.00 KNS
Tu= 1.53 KN-MET Tc= 1.2 KN-MET Ts= 2.0 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1314. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.79 SQ.CM.

AT END SUPPORT - Vu= 5.29 KNS Vc= 40.66 KNS Vs= 0.00 KNS
Tu= 1.53 KN-MET Tc= 1.2 KN-MET Ts= 2.0 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1314. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.79 SQ.CM.

___ 4J____________________ 3100X 200X 300_____________________ 5J____

| |
||==================== =================================================||
| 2No12 H 243.| |0.TO 858|2No12|H|243.1079.TO|3100 | | | | |
| 18*12c/c 81 | | | | | | | | | | | | | | | | | | | | 18*12c/c 81 |
| 2No12 H |57.| |0.TO 2401| | | | | | | | | | | | | | | | |
||========================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 45 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 46

=====================================================================

BEAM NO. 5 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2423. YES NO

2 243. 2 - 12MM 0. 875. YES NO
3 243. 2 - 12MM 1392. 3200. NO YES

B E A M N O. 5 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.82 KNS Vc= 40.64 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.04 KNS Vc= 40.58 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 6J____________________ 3200X 200X 300_____________________ 7J____

| |
||=================== ==========================================||
| 2No12 H 243. 0.TO 875 2No12 H 243.1392.TO 3200 |
| |
| 2No12 H 57. 0.TO 2423 |
||======================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 46 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 47

=====================================================================

BEAM NO. 6 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2649. YES NO

2 243. 2 - 12MM 0. 925. YES NO
3 243. 2 - 12MM 1263. 3500. NO YES

B E A M N O. 6 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.99 KNS Vc= 40.63 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.29 KNS Vc= 40.56 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 7J____________________ 3500X 200X 300_____________________ 8J____

| |
||=================== ================================================||
| 2No12 H 243. 0.TO 925 2No12 H 243.1263.TO 3500 |
| |
| 2No12 H 57. 0.TO 2649 |
||======================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 47 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 48

=====================================================================

BEAM NO. 7 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 243. 2 - 12MM 0. 3500. YES YES

B E A M N O. 7 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.70 KNS Vc= 42.81 KNS Vs= 0.00 KNS
Tu= 1.78 KN-MET Tc= 1.2 KN-MET Ts= 2.4 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.92 SQ.CM.

AT END SUPPORT - Vu= 3.43 KNS Vc= 40.52 KNS Vs= 0.00 KNS
Tu= 1.78 KN-MET Tc= 1.2 KN-MET Ts= 2.4 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.92 SQ.CM.

___ 8J____________________ 3499X 200X 300_____________________ 9J____

| |
||=========================================================================||
| 2No12 H 243.| |0.TO 3500| | | | | | | | | | | | | | | | | | | | | | | | | |
| 20*12c/c 81 | | | | | | | | | | | | | | | | | | | | | | | |20*12c/c 81| | |
| 2No12 H |57.| |0.TO 3500| | | | | | | | | | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 48 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 49

=====================================================================

BEAM NO. 8 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2348. YES NO

2 243. 2 - 12MM 0. 858. YES NO
3 243. 2 - 12MM 1079. 3100. NO YES

B E A M N O. 8 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.29 KNS Vc= 44.39 KNS Vs= 0.00 KNS
Tu= 1.74 KN-MET Tc= 1.2 KN-MET Ts= 2.3 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1314. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.90 SQ.CM.

AT END SUPPORT - Vu= 3.17 KNS Vc= 40.56 KNS Vs= 0.00 KNS
Tu= 1.74 KN-MET Tc= 1.2 KN-MET Ts= 2.3 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1314. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.90 SQ.CM.

___ 9J____________________ 3100X 200X 300_____________________ 10J____

| |
||==================== =================================================||
| 2No12 H 243.| |0.TO 858|2No12|H|243.1079.TO|3100 | | | |
| 18*12c/c 81 | | | | | | | | | | | | | | | | | | | 18*12c/c 81 |
| 2No12 H |57.| |0.TO 2348| | | | | | | | | | | | | | | |
||======================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 49 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 50

=====================================================================

BEAM NO. 9 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 243. 2 - 12MM 0. 3200. YES YES

B E A M N O. 9 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.82 KNS Vc= 40.61 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.04 KNS Vc= 40.55 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 11J____________________ 3200X 200X 300_____________________ 12J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 50 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 51

=====================================================================

BEAM NO. 10 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 243. 2 - 12MM 0. 3500. YES YES

B E A M N O. 10 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.99 KNS Vc= 40.61 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.29 KNS Vc= 40.55 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 12J____________________ 3500X 200X 300_____________________ 13J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 51 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 52

=====================================================================

BEAM NO. 11 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 707. 3500. NO YES

2 243. 2 - 12MM 0. 2091. YES NO
3 243. 2 - 12MM 2429. 3500. NO YES

B E A M N O. 11 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.14 KNS Vc= 40.53 KNS Vs= 0.00 KNS
Tu= 1.81 KN-MET Tc= 1.2 KN-MET Ts= 2.4 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.94 SQ.CM.

AT END SUPPORT - Vu= 1.99 KNS Vc= 74.84 KNS Vs= 0.00 KNS
Tu= 1.81 KN-MET Tc= 1.2 KN-MET Ts= 2.4 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.94 SQ.CM.

___ 13J____________________ 3499X 200X 300_____________________ 14J____

| |
||============================================ =======================||
| 2No12 H 243. |0.TO 2091| | | | | | | | | | 2No12|H|243.2429.TO|3500 |
| 20*12c/c 81 | | | | | | | | | | | | | | | | | | | |20*12c/c 81| | |
| 2No12 H |57.|707.TO 3500| | | | | | | | | | | | | | | |
| ============================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 52 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 53

=====================================================================

BEAM NO. 12 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 243. 2 - 12MM 0. 1633. YES NO
3 243. 2 - 12MM 1596. 3100. NO YES

B E A M N O. 12 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.16 KNS Vc= 40.58 KNS Vs= 0.00 KNS
Tu= 1.77 KN-MET Tc= 1.2 KN-MET Ts= 2.4 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1314. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.91 SQ.CM.

AT END SUPPORT - Vu= 1.30 KNS Vc= 75.33 KNS Vs= 0.00 KNS
Tu= 1.77 KN-MET Tc= 1.2 KN-MET Ts= 2.4 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 81. MM C/C FOR 1314. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.91 SQ.CM.

___ 14J____________________ 3100X 200X 300_____________________ 15J____

| |
||=========================================================================||
| 2No12 H 243.| |0.TO 1633| | | | | | 2No12 H 243.1596.TO 3100| | | | | | |
| 18*12c/c 81 | | | | | | | | | | | | | | | | | | | | | | |18*12c/c 81| | |
| 2No12 H |57.| |0.TO 3100| | | | | | | | | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 53 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 54

=====================================================================

BEAM NO. 13 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 243. 2 - 12MM 0. 3200. YES YES

B E A M N O. 13 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.77 KNS Vc= 41.03 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.08 KNS Vc= 40.79 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 16J____________________ 3200X 200X 300_____________________ 17J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 54 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 55

=====================================================================

BEAM NO. 14 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 243. 2 - 12MM 0. 1800. YES NO
3 243. 2 - 12MM 1554. 3500. NO YES

B E A M N O. 14 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.98 KNS Vc= 40.89 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.30 KNS Vc= 40.72 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 17J____________________ 3500X 200X 300_____________________ 18J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 1800 2No12 H 243.1554.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 55 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 56

=====================================================================

BEAM NO. 15 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 243. 2 - 12MM 0. 3500. YES YES

B E A M N O. 15 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.99 KNS Vc= 40.97 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.28 KNS Vc= 40.76 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 18J____________________ 3499X 200X 300_____________________ 19J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 56 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 57

=====================================================================

BEAM NO. 16 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 243. 2 - 12MM 0. 1633. YES NO
3 243. 2 - 12MM 1596. 3100. NO YES

B E A M N O. 16 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.82 KNS Vc= 42.24 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.89 KNS Vc= 41.74 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 19J____________________ 3100X 200X 300_____________________ 20J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 1633 2No12 H 243.1596.TO 3100 |
| |
| 2No12 H 57. 0.TO 3100 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 57 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 58

=====================================================================

BEAM NO. 17 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 4000. YES YES

2 243. 2 - 12MM 0. 2008. YES NO
3 243. 3 - 12MM 1825. 4000. NO YES

B E A M N O. 17 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.47 KNS Vc= 43.15 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 16.61 KNS Vc= 41.36 KNS Vs= 0.00 KNS
Tu= 0.19 KN-MET Tc= 1.3 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 1764. MM

___ 1J____________________ 4000X 200X 300_____________________ 6J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 2008 3No12 H 243.1825.TO 4000| | | | | | |
| | | | | | | | | 16*12c/c122 | |
| 3No12 H 57. 0.TO 4000 | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | 2#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 58 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 59

=====================================================================

BEAM NO. 18 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 3194. YES NO

2 243. 2 - 12MM 0. 991. YES NO
3 243. 3 - 12MM 1771. 3900. NO YES

B E A M N O. 18 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.42 KNS Vc= 42.70 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 15.80 KNS Vc= 41.21 KNS Vs= 0.00 KNS
Tu= 0.18 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 1714. MM

___ 6J____________________ 3899X 200X 300_____________________ 11J____

| |
||================== =========================================||
| 2No12 H 243. 0.TO 991 3No12 H 243.1771.TO 3900| | |
| | | | | | | | | 16*12c/c122 |
| 3No12 H 57. 0.TO 3194 | | | | | | | | | |
||============================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 59 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 60

=====================================================================

BEAM NO. 19 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 3278. YES NO

2 243. 2 - 12MM 0. 1008. YES NO
3 241. 2 - 16MM 1378. 4000. NO YES

B E A M N O. 19 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.50 KNS Vc= 42.82 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 16.42 KNS Vc= 41.16 KNS Vs= 0.00 KNS
Tu= 0.18 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 1764. MM

___ 11J____________________ 4000X 200X 300_____________________ 16J____

| |
||================== =================================================||
| 2No12 H 243. 0.TO 1008 2No16 H 241.1378.TO 4000 | | | | |
| | | | | | | | | 16*12c/c122 |
| 3No12 H 57. 0.TO 3278 | | | | | | | | | |
||============================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 60 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 61

=====================================================================

BEAM NO. 20 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 4000. YES YES

2 243. 2 - 12MM 0. 2008. YES NO
3 241. 2 - 16MM 1711. 4000. NO YES

B E A M N O. 20 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.51 KNS Vc= 42.48 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 17.75 KNS Vc= 41.53 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 1.3 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 1764. MM

___ 2J____________________ 4000X 200X 300_____________________ 7J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 2008 2No16|H 241.1711.TO 4000 | | | | | | |
| | | | | | | | | 16*12c/c122 | |
| 3No12 H 57. 0.TO 4000 | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 61 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 62

=====================================================================

BEAM NO. 21 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 3219. YES NO

2 243. 2 - 12MM 0. 991. YES NO
3 241. 2 - 16MM 1657. 3900. NO YES

B E A M N O. 21 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.42 KNS Vc= 42.48 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 16.83 KNS Vc= 41.31 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 1.3 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 1714. MM

___ 7J____________________ 3899X 200X 300_____________________ 12J____

| |
||================== ===========================================||
| 2No12 H 243. 0.TO 991 2No16|H 241.1657.TO 3900 | | |
| | | | | | | | | 16*12c/c122 |
| 3No12 H 57. 0.TO 3219 | | | | | | | | | |
||============================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 62 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 63

=====================================================================

BEAM NO. 22 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 3304. YES NO

2 243. 2 - 12MM 0. 1008. YES NO
3 241. 2 - 16MM 1378. 4000. NO YES

B E A M N O. 22 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.47 KNS Vc= 42.48 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 17.50 KNS Vc= 41.23 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 122. MM C/C FOR 1764. MM

___ 12J____________________ 4000X 200X 300_____________________ 17J____

| |
||================== =================================================||
| 2No12 H 243. 0.TO 1008 2No16 H 241.1378.TO 4000 | | | | |
| | | | | | | | | 16*12c/c122 |
| 3No12 H 57. 0.TO 3304 | | | | | | | | | |
||============================================================= |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 63 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 64

=====================================================================

BEAM NO. 23 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 4000. YES YES

2 243. 2 - 12MM 0. 2008. YES NO
3 239. 2 - 20MM 1510. 4000. NO YES

B E A M N O. 23 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.52 KNS Vc= 42.13 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 19.79 KNS Vc= 41.35 KNS Vs= 0.00 KNS
Tu= 0.18 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 121. MM C/C FOR 1764. MM

___ 3J____________________ 4000X 200X 300_____________________ 8J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 2008 2No20 H 239.1510.TO 4000| | | | | | | | |
| | | | | | | | | 16*12c/c121 | |
| 2No16 H 59. 0.TO 4000 | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 64 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 65

=====================================================================

BEAM NO. 24 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3312. YES NO

2 243. 2 - 12MM 0. 991. YES NO
3 241. 2 - 16MM 1657. 3900. NO YES

B E A M N O. 24 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.42 KNS Vc= 42.12 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 18.74 KNS Vc= 41.10 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 1.3 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 121. MM C/C FOR 1714. MM

___ 8J____________________ 3899X 200X 300_____________________ 13J____

| |
||================== ===========================================||
| 2No12 H 243. 0.TO 991 2No16|H 241.1657.TO 3900 | | |
| | | | | | | | | 16*12c/c121 |
| 2No16 H 59. 0.TO 3312 | | | | | | | | | |
||=============================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 65 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 66

=====================================================================

BEAM NO. 25 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3402. YES NO

2 243. 2 - 12MM 0. 1008. YES NO
3 239. 2 - 20MM 1176. 4000. NO YES

B E A M N O. 25 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.47 KNS Vc= 42.13 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 19.53 KNS Vc= 41.01 KNS Vs= 0.00 KNS
Tu= 0.18 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 121. MM C/C FOR 1764. MM

___ 13J____________________ 4000X 200X 300_____________________ 18J____

| |
||================== =====================================================||
| 2No12 H 243. 0.TO 100820 H 239.1176.TO 4000| | | | | | |
| | | | | | | | | 16*12c/c121 |
| 2No16 H 59. 0.TO 3402 | | | | | | | | | |
||=============================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 66 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 67

=====================================================================

BEAM NO. 26 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 61. 2 - 20MM 0. 4000. YES YES

2 239. 2 - 20MM 0. 4000. YES YES

B E A M N O. 26 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.55 KNS Vc= 41.73 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 21.22 KNS Vc= 41.02 KNS Vs= 0.00 KNS
Tu= 0.20 KN-MET Tc= 1.3 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 120. MM C/C FOR 1764. MM

___ 5J____________________ 4000X 200X 300_____________________ 10J____

| |
||=========================================================================||
| 2No20 H 239. 0.TO 4000 | | | | | | | | | | | | | |
| | | | | | | | | 16*12c/c120 | |
| 2No20 H 61. 0.TO 4000 | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | | | |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 67 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 68

=====================================================================

BEAM NO. 27 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3354. YES NO

2 239. 2 - 20MM 0. 3900. YES YES

B E A M N O. 27 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.42 KNS Vc= 42.04 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 20.25 KNS Vc= 41.15 KNS Vs= 0.00 KNS
Tu= 0.19 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 121. MM C/C FOR 1714. MM

___ 10J____________________ 3899X 200X 300_____________________ 15J____

| |
||=========================================================================||
| 2No20 H 239. 0.TO 3900 | | | | | | | | | | |
| | | | | | | | | 16*12c/c121 |
| 2No16 H 59. 0.TO 3354 | | | | | | | | | | |
||================================================================ |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 68 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 69

=====================================================================

BEAM NO. 28 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 59. 2 - 16MM 0. 3453. YES NO

2 243. 2 - 12MM 0. 1008. YES NO
3 239. 2 - 20MM 1176. 4000. NO YES

B E A M N O. 28 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.43 KNS Vc= 42.08 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 21.18 KNS Vc= 42.17 KNS Vs= 0.00 KNS
Tu= 0.18 KN-MET Tc= 1.2 KN-MET Ts= 0.0 KN-MET LOAD 5
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 121. MM C/C FOR 1764. MM

___ 15J____________________ 4000X 200X 300_____________________ 20J____

| |
||================== =====================================================||
| 2No12 H 243. 0.TO 100820 H 239.1176.TO 4000| | | | | | | |
| | | | | | | | | 16*12c/c121 |
| 2No16 H 59. 0.TO 3453 | | | | | | | | | | |
||================================================================ |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 69 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 70

=====================================================================

BEAM NO. 49 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2218. YES NO

2 393. 2 - 12MM 0. 444. YES NO
3 393. 2 - 12MM 1023. 3200. NO YES

B E A M N O. 49 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.02 KNS Vc= 82.70 KNS Vs= 0.00 KNS
Tu= 0.20 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.41 KNS Vc= 82.41 KNS Vs= 0.00 KNS
Tu= 0.20 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 41J____________________ 3200X 250X 450_____________________ 42J____

| |
||========= ===================================================||
| 2No12 H 393. 0.TO 444No12 H 393.1023.TO 3200 |
| |
| 2No12 H 57. 0.TO 2218 |
||=================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 70 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 71

=====================================================================

BEAM NO. 50 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2413. YES NO

2 393. 2 - 12MM 0. 444. YES NO
3 393. 2 - 12MM 1160. 3500. NO YES

B E A M N O. 50 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.43 KNS Vc= 85.07 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.80 KNS Vc= 82.34 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 42J____________________ 3500X 250X 450_____________________ 43J____

| |
||======== ==================================================||
| 2No12 H 393. 0.TO 4442No12 H 393.1160.TO 3500 |
| |
| 2No12 H 57. 0.TO 2413 |
||=================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 71 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 72

=====================================================================

BEAM NO. 51 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 393. 2 - 12MM 0. 736. YES NO
3 393. 2 - 12MM 1160. 3500. NO YES

B E A M N O. 51 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.03 KNS Vc= 150.60 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.20 KNS Vc= 82.12 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 43J____________________ 3499X 250X 450_____________________ 44J____

| |
||============== ==================================================||
| 2No12 H 393. 0.TO 7362No12 H 393.1160.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 72 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 73

=====================================================================

BEAM NO. 52 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1662. YES NO

2 393. 2 - 12MM 719. 3100. NO YES

B E A M N O. 52 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.11 KNS Vc= 81.65 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.05 KNS Vc= 82.17 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 44J____________________ 3100X 250X 450_____________________ 45J____

| |
| ==========================================================||
| 2No12 H 393. 719.TO 3100 |
| |
| 2No12 H 57. 0.TO 1662 |
||======================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | | | oo | | oo | | oo | | oo |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 73 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 74

=====================================================================

BEAM NO. 53 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2169. YES NO

2 393. 2 - 12MM 0. 444. YES NO
3 393. 2 - 12MM 1289. 3200. NO YES

B E A M N O. 53 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.25 KNS Vc= 82.71 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.18 KNS Vc= 81.95 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 46J____________________ 3200X 250X 450_____________________ 47J____

| |
||========= =============================================||
| 2No12 H 393. 0.TO 444 2No12 H 393.1289.TO 3200 |
| |
| 2No12 H 57. 0.TO 2169 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | | | oo | | oo | | oo |
| 2#12 | | | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 74 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 75

=====================================================================

BEAM NO. 54 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 844. YES NO
3 393. 2 - 12MM 1089. 1600. NO YES

B E A M N O. 54 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 6.20 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 3.81 KN-MET Tc= 3.0 KN-MET Ts= 5.1 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.29 SQ.CM.

AT END SUPPORT - Vu= 3.57 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 3.81 KN-MET Tc= 3.0 KN-MET Ts= 5.1 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.29 SQ.CM.

___ 47J____________________ 1600X 250X 450_____________________ 71J____

| |
||======================================= ========================||
| 2No12 H|393. |0.TO 844 | 2No12 H 393.1089.TO 1600 |
| 5*12c/c131 | | | | | 5*12c/c131 | |
| 2No12 H| 57. |0.TO 1600 | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 75 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 76

=====================================================================

BEAM NO. 55 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 393. 2 - 12MM 0. 1611. YES NO
3 393. 2 - 12MM 1452. 3500. NO YES

B E A M N O. 55 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.56 KNS Vc= 82.22 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.67 KNS Vc= 82.13 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 48J____________________ 3499X 250X 450_____________________ 49J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1611 2No12 H 393.1452.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 76 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 77

=====================================================================

BEAM NO. 56 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1349. YES NO

2 393. 2 - 12MM 719. 3100. NO YES

B E A M N O. 56 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.64 KNS Vc= 81.70 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.81 KNS Vc= 81.85 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 49J____________________ 3100X 250X 450_____________________ 50J____

| |
| ==========================================================||
| 2No12 H 393. 719.TO 3100 |
| |
| 2No12 H 57. 0.TO 1349 |
||================================ |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | | | oo | | oo | | oo | | oo |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 77 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 78

=====================================================================

BEAM NO. 57 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 393. 2 - 12MM 0. 3200. YES YES

B E A M N O. 57 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.26 KNS Vc= 82.44 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.17 KNS Vc= 81.86 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 51J____________________ 3200X 250X 450_____________________ 52J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 78 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 79

=====================================================================

BEAM NO. 58 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 1511. YES NO
3 393. 2 - 12MM 1089. 1600. NO YES

B E A M N O. 58 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 7.52 KNS Vc= 84.77 KNS Vs= 0.00 KNS
Tu= 3.46 KN-MET Tc= 3.0 KN-MET Ts= 4.6 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.17 SQ.CM.

AT END SUPPORT - Vu= 4.89 KNS Vc= 82.23 KNS Vs= 0.00 KNS
Tu= 3.46 KN-MET Tc= 3.0 KN-MET Ts= 4.6 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.17 SQ.CM.

___ 52J____________________ 1600X 250X 450_____________________ 72J____

| |
||=========================================================================||
| 2No12 H|393. |0.TO 1511 | | 2No12 H 393.1089.TO 1600 |
| 5*12c/c131 | | | | | | 5*12c/c131 | |
| 2No12 H| 57. |0.TO 1600 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 79 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 80

=====================================================================

BEAM NO. 59 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 699. 3500. NO YES

2 393. 2 - 12MM 0. 2194. YES NO
3 393. 2 - 12MM 2327. 3500. NO YES

B E A M N O. 59 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.55 KNS Vc= 82.24 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.68 KNS Vc= 82.13 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 53J____________________ 3499X 250X 450_____________________ 54J____

| |
||============================================== =========================||
| 2No12 H 393. 0.TO 2194 2No12 H 393.2327.TO 3500 |
| |
| 2No12 H 57. 699.TO 3500 |
| ============================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 80 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 81

=====================================================================

BEAM NO. 60 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 393. 2 - 12MM 0. 3100. YES YES

B E A M N O. 60 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.65 KNS Vc= 81.70 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.81 KNS Vc= 81.85 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 54J____________________ 3100X 250X 450_____________________ 55J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3100 |
| |
| 2No12 H 57. 0.TO 3100 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 81 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 82

=====================================================================

BEAM NO. 61 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 393. 2 - 12MM 0. 1777. YES NO
3 393. 2 - 12MM 1289. 3200. NO YES

B E A M N O. 61 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.87 KNS Vc= 82.22 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.56 KNS Vc= 82.12 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 56J____________________ 3200X 250X 450_____________________ 57J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1777 2No12 H 393.1289.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 82 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 83

=====================================================================

BEAM NO. 62 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 1600. YES YES

B E A M N O. 62 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 10.33 KNS Vc= 82.52 KNS Vs= 0.00 KNS
Tu= 5.46 KN-MET Tc= 3.1 KN-MET Ts= 7.3 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.85 SQ.CM.

AT END SUPPORT - Vu= 7.70 KNS Vc= 152.93 KNS Vs= 0.00 KNS
Tu= 5.46 KN-MET Tc= 3.1 KN-MET Ts= 7.3 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 414. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.85 SQ.CM.

___ 57J____________________ 1600X 250X 450_____________________ 73J____

| |
||=========================================================================||
| 2No12 H|393. |0.TO 1600 | | | | | | |
| 5*12c/c131 | | | | | | 5*12c/c131 | |
| 2No12 H| 57. |0.TO 1600 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 83 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 84

=====================================================================

BEAM NO. 63 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 103. 3500. NO YES

2 393. 2 - 12MM 0. 1902. YES NO
3 393. 2 - 12MM 2035. 3500. NO YES

B E A M N O. 63 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.10 KNS Vc= 88.70 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.13 KNS Vc= 82.11 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 58J____________________ 3499X 250X 450_____________________ 59J____

| |
||======================================== ===============================||
| 2No12 H 393. 0.TO 1902 2No12 H 393.2035.TO 3500 |
| |
| 2No12 H 57. 103.TO 3500 |
| =========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 84 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 85

=====================================================================

BEAM NO. 64 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1331. YES NO

2 57. 2 - 12MM 1632. 3100. NO YES
3 393. 2 - 12MM 0. 3100. YES YES

B E A M N O. 64 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.08 KNS Vc= 81.61 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.09 KNS Vc= 81.83 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 59J____________________ 3100X 250X 450_____________________ 60J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3100 |
| |
| 2No12 H 57. 0.TO 1331 2No12 H 57.1632.TO 3100 |
||=============================== ===================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 85 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 86

=====================================================================

BEAM NO. 65 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 2111. YES NO
3 393. 3 - 12MM 1723. 4000. NO YES

B E A M N O. 65 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.24 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.31 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 41J____________________ 4000X 250X 450_____________________ 46J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2111 3No12 H 393.1723.TO 4000 |
| |
| 3No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | 2#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 86 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 87

=====================================================================

BEAM NO. 66 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 3 - 12MM 1344. 3900. NO YES

B E A M N O. 66 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.14 KNS Vc= 85.78 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.15 KNS Vc= 85.78 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 46J____________________ 3899X 250X 450_____________________ 51J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1094 3No12 H 393.1344.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 87 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 88

=====================================================================

BEAM NO. 67 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 3245. YES NO

2 393. 2 - 12MM 0. 1111. YES NO
3 393. 3 - 12MM 1389. 4000. NO YES

B E A M N O. 67 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.28 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.27 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 51J____________________ 4000X 250X 450_____________________ 56J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1111 3No12 H 393.1389.TO 4000 |
| |
| 3No12 H 57. 0.TO 3245 |
||============================================================ |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 88 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 89

=====================================================================

BEAM NO. 68 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1400. YES YES

B E A M N O. 68 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.14 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.74 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.47 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.74 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 42J____________________ 1400X 250X 450_____________________ 65J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1400 |
| |
| 3No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 89 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 90

=====================================================================

BEAM NO. 69 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1144. YES NO

B E A M N O. 69 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.21 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 0.68 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.55 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 0.68 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 47J____________________ 1399X 250X 450_____________________ 67J____

| |
||============================================================= |
| 2No12 H 393. 0.TO 1144 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 90 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 91

=====================================================================

BEAM NO. 70 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1144. YES NO

B E A M N O. 70 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.87 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.68 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 7.21 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.68 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 52J____________________ 1399X 250X 450_____________________ 69J____

| |
||============================================================= |
| 2No12 H 393. 0.TO 1144 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 91 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 92

=====================================================================

BEAM NO. 71 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1400. YES YES

B E A M N O. 71 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.26 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 1.21 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.60 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 1.21 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 43J____________________ 1400X 250X 450_____________________ 66J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1400 |
| |
| 3No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 92 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 93

=====================================================================

BEAM NO. 72 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1144. YES NO

B E A M N O. 72 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.27 KNS Vc= 85.74 KNS Vs= 0.00 KNS
Tu= 1.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.61 KNS Vc= 85.74 KNS Vs= 0.00 KNS
Tu= 1.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 48J____________________ 1399X 250X 450_____________________ 68J____

| |
||============================================================= |
| 2No12 H 393. 0.TO 1144 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 93 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 94

=====================================================================

BEAM NO. 73 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1144. YES NO

B E A M N O. 73 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.88 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 1.17 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 7.22 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 1.17 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 53J____________________ 1399X 250X 450_____________________ 70J____

| |
||============================================================= |
| 2No12 H 393. 0.TO 1144 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 94 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 95

=====================================================================

BEAM NO. 74 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 3 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 444. YES NO
3 393. 3 - 12MM 1723. 4000. NO YES

B E A M N O. 74 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.59 KNS Vc= 85.80 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.96 KNS Vc= 85.80 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 45J____________________ 4000X 250X 450_____________________ 50J____

| |
||======= ===========================================||
| 2No12 H 393. 0.TO 444 3No12 H 393.1723.TO 4000 |
| |
| 3No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | | | ooo | | ooo | | ooo |
| 2#12 | | | | | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 95 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 96

=====================================================================

BEAM NO. 75 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 3 - 12MM 1669. 3900. NO YES

B E A M N O. 75 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.14 KNS Vc= 85.76 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.15 KNS Vc= 85.76 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 50J____________________ 3899X 250X 450_____________________ 55J____

| |
||==================== ===========================================||
| 2No12 H 393. 0.TO 1094 3No12 H 393.1669.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 96 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 97

=====================================================================

BEAM NO. 76 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 1111. YES NO
3 393. 3 - 12MM 1389. 4000. NO YES

B E A M N O. 76 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.94 KNS Vc= 85.80 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.61 KNS Vc= 85.80 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 55J____________________ 4000X 250X 450_____________________ 60J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1111 3No12 H 393.1389.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 2#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 97 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 98

=====================================================================

BEAM NO. 77 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 2111. YES NO
3 393. 2 - 12MM 1723. 4000. NO YES

B E A M N O. 77 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.51 KNS Vc= 85.79 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.04 KNS Vc= 85.79 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 44J____________________ 4000X 250X 450_____________________ 49J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2111 2No12 H 393.1723.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 98 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 99

=====================================================================

BEAM NO. 78 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 2 - 12MM 1669. 3900. NO YES

B E A M N O. 78 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.15 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.14 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 49J____________________ 3899X 250X 450_____________________ 54J____

| |
||==================== ===========================================||
| 2No12 H 393. 0.TO 1094 2No12 H 393.1669.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 99 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 100

=====================================================================

BEAM NO. 79 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3277. YES NO

2 393. 2 - 12MM 0. 777. YES NO
3 393. 3 - 12MM 1056. 4000. NO YES

B E A M N O. 79 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.03 KNS Vc= 85.79 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.52 KNS Vc= 85.79 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 54J____________________ 4000X 250X 450_____________________ 59J____

| |
||============= =======================================================||
| 2No12 H 393. 0.TO3N777 H 393.1056.TO 4000 |
| |
| 2No12 H 57. 0.TO 3277 |
||============================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 100 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 101

=====================================================================

BEAM NO. 80 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 2444. YES NO
3 393. 2 - 12MM 2056. 4000. NO YES

B E A M N O. 80 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 5.22 KNS Vc= 85.67 KNS Vs= 0.00 KNS
Tu= 0.23 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.34 KNS Vc= 85.67 KNS Vs= 0.00 KNS
Tu= 0.23 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 61J____________________ 4000X 250X 450_____________________ 62J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2444 2No12 H 393.2056.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 101 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 102

=====================================================================

BEAM NO. 81 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 2 - 12MM 1669. 3900. NO YES

B E A M N O. 81 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.14 KNS Vc= 85.77 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.15 KNS Vc= 85.77 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 62J____________________ 3899X 250X 450_____________________ 63J____

| |
||==================== ===========================================||
| 2No12 H 393. 0.TO 1094 2No12 H 393.1669.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 102 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 103

=====================================================================

BEAM NO. 82 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2759. YES NO

2 393. 2 - 12MM 0. 444. YES NO
3 393. 2 - 12MM 723. 4000. NO YES

B E A M N O. 82 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.33 KNS Vc= 85.67 KNS Vs= 0.00 KNS
Tu= 0.23 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.23 KNS Vc= 85.67 KNS Vs= 0.00 KNS
Tu= 0.23 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 63J____________________ 4000X 250X 450_____________________ 64J____

| |
||======= ==============================================================||
| 2No12 H 393.2No0.TO 3444 723.TO 4000 |
| |
| 2No12 H 57. 0.TO 2759 |
||=================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 103 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 104

=====================================================================

BEAM NO. 83 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1000. YES YES

2 393. 2 - 12MM 0. 1000. YES YES

B E A M N O. 83 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 13.97 KNS Vc= 85.12 KNS Vs= 0.00 KNS
Tu= 5.80 KN-MET Tc= 3.0 KN-MET Ts= 7.7 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.97 SQ.CM.

AT END SUPPORT - Vu= 13.25 KNS Vc= 150.58 KNS Vs= 0.00 KNS
Tu= 5.80 KN-MET Tc= 3.0 KN-MET Ts= 7.7 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.97 SQ.CM.

___ 45J____________________ 999X 250X 450_____________________ 61J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1000 | | |
| 2*12c/c131 2*12c/c131 | |
| 2No12 H 57. 0.TO 1000 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 104 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 105

=====================================================================

BEAM NO. 84 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 195. 1000. NO YES

2 393. 3 - 12MM 0. 1000. YES YES

B E A M N O. 84 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 35.32 KNS Vc= 85.08 KNS Vs= 0.00 KNS
Tu= 4.16 KN-MET Tc= 3.0 KN-MET Ts= 5.5 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.41 SQ.CM.

AT END SUPPORT - Vu= 34.59 KNS Vc= 151.18 KNS Vs= 0.00 KNS
Tu= 4.16 KN-MET Tc= 3.0 KN-MET Ts= 5.5 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.41 SQ.CM.

___ 50J____________________ 999X 250X 450_____________________ 62J____

| |
||=========================================================================||
| 3No12 H 393. 0.TO 1000 | | |
| 2*12c/c131 2*12c/c131 | |
| 2No12 H 57. 195.TO 1000 | | |
| =============================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 105 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 106

=====================================================================

BEAM NO. 85 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 346. YES NO

2 57. 2 - 12MM 528. 1000. NO YES
3 393. 3 - 12MM 0. 1000. YES YES

B E A M N O. 85 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 28.39 KNS Vc= 84.46 KNS Vs= 0.00 KNS
Tu= 3.87 KN-MET Tc= 3.0 KN-MET Ts= 5.2 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.31 SQ.CM.

AT END SUPPORT - Vu= 27.67 KNS Vc= 95.25 KNS Vs= 0.00 KNS
Tu= 3.87 KN-MET Tc= 3.0 KN-MET Ts= 5.2 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.31 SQ.CM.

___ 55J____________________ 999X 250X 450_____________________ 63J____

| |
||=========================================================================||
| 3No12 H 393. 0.TO 1000 | | |
| 2*12c/c131 2*12c/c131 | |
| 2No12 H 57. 0.TO 346 2No12 H 57. 528.TO 1000 | |
||========================= ===================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 106 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 107

=====================================================================

BEAM NO. 86 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 458. 1000. NO YES

2 393. 3 - 12MM 0. 1000. YES YES

B E A M N O. 86 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 38.30 KNS Vc= 84.70 KNS Vs= 0.00 KNS
Tu= 3.40 KN-MET Tc= 3.0 KN-MET Ts= 4.5 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.15 SQ.CM.

AT END SUPPORT - Vu= 37.57 KNS Vc= 126.60 KNS Vs= 0.00 KNS
Tu= 3.40 KN-MET Tc= 3.0 KN-MET Ts= 4.5 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.15 SQ.CM.

___ 60J____________________ 999X 250X 450_____________________ 64J____

| |
||=========================================================================||
| 3No12 H 393. 0.TO 1000 | | |
| 2*12c/c131 2*12c/c131 | |
| 2No12 H 57. 458.TO 1000 | | |
| =========================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| | | | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 107 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 108

=====================================================================

BEAM NO. 87 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 393. 2 - 12MM 0. 877. YES NO
3 393. 3 - 12MM 314. 2600. NO YES

B E A M N O. 87 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.42 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.35 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.26 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.35 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 65J____________________ 2600X 250X 450_____________________ 47J____

| |
||=========================================================================||
| 2No12 H 393.2 H0.TO. 877.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 108 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 109

=====================================================================

BEAM NO. 88 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 393. 2 - 12MM 0. 661. YES NO
3 393. 3 - 12MM 314. 2600. NO YES

B E A M N O. 88 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.46 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 0.62 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.31 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 0.62 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 66J____________________ 2600X 250X 450_____________________ 48J____

| |
||=========================================================================||
| 2No12 H 393.2 H0.TO. 661.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 2#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 109 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 110

=====================================================================

BEAM NO. 89 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 393. 3 - 12MM 77. 2500. NO YES

B E A M N O. 89 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.31 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.89 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 67J____________________ 2500X 250X 450_____________________ 52J____

| |
| =========================================================================||
| 3No12 H 393. 77.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 110 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 111

=====================================================================

BEAM NO. 90 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 393. 3 - 12MM 77. 2500. NO YES

B E A M N O. 90 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.38 KNS Vc= 85.74 KNS Vs= 0.00 KNS
Tu= 0.63 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.96 KNS Vc= 85.74 KNS Vs= 0.00 KNS
Tu= 0.63 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 68J____________________ 2500X 250X 450_____________________ 53J____

| |
| =========================================================================||
| 3No12 H 393. 77.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 111 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 112

=====================================================================

BEAM NO. 91 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1885. YES NO

2 393. 3 - 12MM 0. 2600. YES YES

B E A M N O. 91 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.73 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.58 KNS Vc= 85.82 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 69J____________________ 2600X 250X 450_____________________ 57J____

| |
||=========================================================================||
| 3No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 1885 |
||====================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 112 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 113

=====================================================================

BEAM NO. 92 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1892. YES NO

2 393. 3 - 12MM 0. 2600. YES YES

B E A M N O. 92 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.87 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.71 KNS Vc= 85.70 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 70J____________________ 2600X 250X 450_____________________ 58J____

| |
||=========================================================================||
| 3No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 1892 |
||====================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 | | 3#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 113 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 114

=====================================================================

BEAM NO. 93 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 577. YES NO
3 393. 2 - 12MM 289. 1600. NO YES

B E A M N O. 93 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.82 KNS Vc= 83.73 KNS Vs= 0.00 KNS
Tu= 0.54 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.63 KNS Vc= 81.86 KNS Vs= 0.00 KNS
Tu= 0.54 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 65J____________________ 1600X 250X 450_____________________ 74J____

| |
||=========================================================================||
| 2No12 H 393.2No0.TO 3577 289.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 114 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 115

=====================================================================

BEAM NO. 94 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 577. YES NO
3 393. 2 - 12MM 0. 1600. YES YES

B E A M N O. 94 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.78 KNS Vc= 83.65 KNS Vs= 0.00 KNS
Tu= 0.40 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.59 KNS Vc= 81.86 KNS Vs= 0.00 KNS
Tu= 0.40 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 67J____________________ 1600X 250X 450_____________________ 75J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1577 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 115 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 116

=====================================================================

BEAM NO. 95 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 1600. YES YES

B E A M N O. 95 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.87 KNS Vc= 83.68 KNS Vs= 0.00 KNS
Tu= 0.59 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.68 KNS Vc= 81.87 KNS Vs= 0.00 KNS
Tu= 0.59 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 69J____________________ 1600X 250X 450_____________________ 76J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 116 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 117

=====================================================================

BEAM NO. 96 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 868. YES NO

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 96 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 6.55 KNS Vc= 84.96 KNS Vs= 0.00 KNS
Tu= 3.53 KN-MET Tc= 2.9 KN-MET Ts= 4.7 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 564. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.20 SQ.CM.

AT END SUPPORT - Vu= 10.14 KNS Vc= 84.96 KNS Vs= 0.00 KNS
Tu= 3.53 KN-MET Tc= 2.9 KN-MET Ts= 4.7 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 564. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.20 SQ.CM.

___ 71J____________________ 1900X 250X 450_____________________ 48J____

| |
||=========================================================================||
| 2No12 H 393.| 0.TO 1900| | |
| 6*12c/c131 | | | | 6*12c/c131 |
| 2No12 H 57.| 0.TO 868| | |
||================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 117 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 118

=====================================================================

BEAM NO. 97 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 97 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.23 KNS Vc= 81.97 KNS Vs= 0.00 KNS
Tu= 3.10 KN-MET Tc= 3.0 KN-MET Ts= 4.1 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 564. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.05 SQ.CM.

AT END SUPPORT - Vu= 7.81 KNS Vc= 82.45 KNS Vs= 0.00 KNS
Tu= 3.10 KN-MET Tc= 3.0 KN-MET Ts= 4.1 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 564. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.05 SQ.CM.

___ 72J____________________ 1900X 250X 450_____________________ 53J____

| |
||=========================================================================||
| 2No12 H 393.| 0.TO 1900| | | | | | | | |
| 6*12c/c131 | | | | | | | 6*12c/c131 | |
| 2No12 H 57.| 0.TO 1900| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 118 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 119

=====================================================================

BEAM NO. 98 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 98 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.44 KNS Vc= 81.98 KNS Vs= 0.00 KNS
Tu= 4.75 KN-MET Tc= 3.0 KN-MET Ts= 6.3 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 564. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.61 SQ.CM.

AT END SUPPORT - Vu= 6.02 KNS Vc= 152.15 KNS Vs= 0.00 KNS
Tu= 4.75 KN-MET Tc= 3.0 KN-MET Ts= 6.3 KN-MET LOAD 5
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 131. MM C/C FOR 564. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.61 SQ.CM.

___ 73J____________________ 1900X 250X 450_____________________ 58J____

| |
||=========================================================================||
| 2No12 H 393.| 0.TO 1900| | | | | | | | |
| 6*12c/c131 | | | | | | | 6*12c/c131 | |
| 2No12 H 57.| 0.TO 1900| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 119 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 120

=====================================================================

BEAM NO. 99 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1518. YES NO

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 99 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.00 KNS Vc= 81.79 KNS Vs= 0.00 KNS
Tu= 0.47 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.98 KNS Vc= 89.36 KNS Vs= 0.00 KNS
Tu= 0.47 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 74J____________________ 1900X 250X 450_____________________ 66J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1518 |
||=========================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 120 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 121

=====================================================================

BEAM NO. 100 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 100 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.93 KNS Vc= 81.78 KNS Vs= 0.00 KNS
Tu= 0.35 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.92 KNS Vc= 88.02 KNS Vs= 0.00 KNS
Tu= 0.35 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 75J____________________ 1900X 250X 450_____________________ 68J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 121 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 122

=====================================================================

BEAM NO. 101 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 101 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.03 KNS Vc= 81.79 KNS Vs= 0.00 KNS
Tu= 0.47 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.02 KNS Vc= 88.57 KNS Vs= 0.00 KNS
Tu= 0.47 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 76J____________________ 1900X 250X 450_____________________ 70J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 122 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 123

=====================================================================

BEAM NO. 102 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 393. 2 - 12MM 0. 2600. YES YES

B E A M N O. 102 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.55 KNS Vc= 81.76 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.29 KNS Vc= 84.64 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 74J____________________ 2600X 250X 450_____________________ 71J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 123 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 124

=====================================================================

BEAM NO. 103 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 393. 2 - 12MM 0. 2500. YES YES

B E A M N O. 103 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.45 KNS Vc= 85.88 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.13 KNS Vc= 85.88 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 75J____________________ 2500X 250X 450_____________________ 72J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 124 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 125

=====================================================================

BEAM NO. 104 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2212. YES NO

2 393. 2 - 12MM 0. 2600. YES YES

B E A M N O. 104 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.63 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.21 KNS Vc= 85.87 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 76J____________________ 2600X 250X 450_____________________ 73J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 2212 |
||=============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 125 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 126

=====================================================================

BEAM NO. 137 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2165. YES NO

2 393. 2 - 12MM 0. 444. YES NO
3 393. 2 - 12MM 489. 3200. NO YES

B E A M N O. 137 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.05 KNS Vc= 85.75 KNS Vs= 0.00 KNS
Tu= 0.20 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.38 KNS Vc= 85.75 KNS Vs= 0.00 KNS
Tu= 0.20 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 77J____________________ 3200X 250X 450_____________________ 78J____

| |
||=========================================================================||
| 2No12 H 393.o120.TO9344489.TO 3200 |
| |
| 2No12 H 57. 0.TO 2165 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 126 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 127

=====================================================================

BEAM NO. 138 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2371. YES NO

2 393. 2 - 12MM 0. 444. YES NO
3 393. 2 - 12MM 1160. 3500. NO YES

B E A M N O. 138 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.22 KNS Vc= 85.47 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.01 KNS Vc= 85.47 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 78J____________________ 3500X 250X 450_____________________ 79J____

| |
||======== ==================================================||
| 2No12 H 393. 0.TO 4442No12 H 393.1160.TO 3500 |
| |
| 2No12 H 57. 0.TO 2371 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 127 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 128

=====================================================================

BEAM NO. 139 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 393. 2 - 12MM 0. 1319. YES NO
3 393. 2 - 12MM 1160. 3500. NO YES

B E A M N O. 139 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.76 KNS Vc= 85.61 KNS Vs= 0.00 KNS
Tu= 0.12 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.47 KNS Vc= 85.61 KNS Vs= 0.00 KNS
Tu= 0.12 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 79J____________________ 3499X 250X 450_____________________ 80J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 13192No12 H 393.1160.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 128 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 129

=====================================================================

BEAM NO. 140 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1588. YES NO

2 393. 2 - 12MM 977. 3100. NO YES

B E A M N O. 140 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.98 KNS Vc= 85.56 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.19 KNS Vc= 85.56 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 80J____________________ 3100X 250X 450_____________________ 81J____

| |
| ====================================================||
| 2No12 H 393. 977.TO 3100 |
| |
| 2No12 H 57. 0.TO 1588 |
||===================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | | | oo | | oo | | oo | | oo |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 129 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 130

=====================================================================

BEAM NO. 141 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2158. YES NO

2 393. 2 - 12MM 0. 711. YES NO
3 393. 2 - 12MM 1289. 3200. NO YES

B E A M N O. 141 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.43 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.00 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 82J____________________ 3200X 250X 450_____________________ 83J____

| |
||=============== =============================================||
| 2No12 H 393. 0.TO 711 2No12 H 393.1289.TO 3200 |
| |
| 2No12 H 57. 0.TO 2158 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 130 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 131

=====================================================================

BEAM NO. 142 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 711. YES NO
3 393. 2 - 12MM 1089. 1600. NO YES

B E A M N O. 142 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.61 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.42 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 83J____________________ 1600X 250X 450_____________________ 107J____

| |
||================================ ========================||
| 2No12 H 393. 0.TO 711 2No12 H 393.1089.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 131 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 132

=====================================================================

BEAM NO. 143 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 393. 2 - 12MM 0. 3500. YES YES

B E A M N O. 143 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.32 KNS Vc= 85.71 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.91 KNS Vc= 85.71 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 84J____________________ 3499X 250X 450_____________________ 85J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 132 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 133

=====================================================================

BEAM NO. 144 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1593. YES NO

2 393. 2 - 12MM 0. 3100. YES YES

B E A M N O. 144 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.75 KNS Vc= 85.63 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.42 KNS Vc= 85.63 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 85J____________________ 3100X 250X 450_____________________ 86J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3100 |
| |
| 2No12 H 57. 0.TO 1593 |
||====================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 133 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 134

=====================================================================

BEAM NO. 145 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 393. 2 - 12MM 0. 3200. YES YES

B E A M N O. 145 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.44 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.00 KNS Vc= 85.81 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 87J____________________ 3200X 250X 450_____________________ 88J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 134 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 135

=====================================================================

BEAM NO. 146 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 1377. YES NO
3 393. 2 - 12MM 1089. 1600. NO YES

B E A M N O. 146 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.52 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.72 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.33 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.72 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 88J____________________ 1600X 250X 450_____________________ 108J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1377 2No12 H 393.1089.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 135 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 136

=====================================================================

BEAM NO. 147 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 703. 3500. NO YES

2 393. 2 - 12MM 0. 1902. YES NO
3 393. 2 - 12MM 2327. 3500. NO YES

B E A M N O. 147 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.31 KNS Vc= 85.71 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.92 KNS Vc= 85.71 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 89J____________________ 3499X 250X 450_____________________ 90J____

| |
||======================================== =========================||
| 2No12 H 393. 0.TO 1902 2No12 H 393.2327.TO 3500 |
| |
| 2No12 H 57. 703.TO 3500 |
| ============================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 136 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 137

=====================================================================

BEAM NO. 148 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 393. 2 - 12MM 0. 961. YES NO
3 393. 2 - 12MM 977. 3100. NO YES

B E A M N O. 148 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.74 KNS Vc= 85.63 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.42 KNS Vc= 85.63 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 90J____________________ 3100X 250X 450_____________________ 91J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 961o12 H 393. 977.TO 3100 |
| |
| 2No12 H 57. 0.TO 3100 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 137 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 138

=====================================================================

BEAM NO. 149 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 393. 2 - 12MM 0. 1244. YES NO
3 393. 2 - 12MM 1289. 3200. NO YES

B E A M N O. 149 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.89 KNS Vc= 85.74 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.54 KNS Vc= 85.74 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 92J____________________ 3200X 250X 450_____________________ 93J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1244 2No12 H 393.1289.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 138 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 139

=====================================================================

BEAM NO. 150 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 1600. YES YES

B E A M N O. 150 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.50 KNS Vc= 85.49 KNS Vs= 0.00 KNS
Tu= 0.58 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.30 KNS Vc= 85.49 KNS Vs= 0.00 KNS
Tu= 0.58 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 93J____________________ 1600X 250X 450_____________________ 109J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 139 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 140

=====================================================================

BEAM NO. 151 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 410. 3500. NO YES

2 393. 2 - 12MM 0. 1902. YES NO
3 393. 2 - 12MM 2035. 3500. NO YES

B E A M N O. 151 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.83 KNS Vc= 85.61 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.40 KNS Vc= 85.61 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 94J____________________ 3499X 250X 450_____________________ 95J____

| |
||======================================== ===============================||
| 2No12 H 393. 0.TO 1902 2No12 H 393.2035.TO 3500 |
| |
| 2No12 H 57. 410.TO 3500 |
| ===================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 140 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 141

=====================================================================

BEAM NO. 152 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 393. 2 - 12MM 0. 3100. YES YES

B E A M N O. 152 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.95 KNS Vc= 85.56 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.22 KNS Vc= 85.56 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 95J____________________ 3100X 250X 450_____________________ 96J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 3100 |
| |
| 2No12 H 57. 0.TO 3100 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 141 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 142

=====================================================================

BEAM NO. 153 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 2111. YES NO
3 393. 2 - 12MM 1723. 4000. NO YES

B E A M N O. 153 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.40 KNS Vc= 84.10 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.16 KNS Vc= 84.88 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 77J____________________ 4000X 250X 450_____________________ 82J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2111 2No12 H 393.1723.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 142 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 143

=====================================================================

BEAM NO. 154 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 2 - 12MM 1344. 3900. NO YES

B E A M N O. 154 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.14 KNS Vc= 83.11 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.15 KNS Vc= 83.09 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 82J____________________ 3899X 250X 450_____________________ 87J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1094 2No12 H 393.1344.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 143 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 144

=====================================================================

BEAM NO. 155 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3136. YES NO

2 393. 2 - 12MM 0. 777. YES NO
3 393. 2 - 12MM 1389. 4000. NO YES

B E A M N O. 155 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.12 KNS Vc= 84.20 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.43 KNS Vc= 83.45 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 87J____________________ 4000X 250X 450_____________________ 92J____

| |
||============= =================================================||
| 2No12 H 393. 0.TO 777 2No12 H 393.1389.TO 4000 |
| |
| 2No12 H 57. 0.TO 3136 |
||========================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 144 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 145

=====================================================================

BEAM NO. 156 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1400. YES YES

B E A M N O. 156 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.36 KNS Vc= 84.71 KNS Vs= 0.00 KNS
Tu= 0.70 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.70 KNS Vc= 83.57 KNS Vs= 0.00 KNS
Tu= 0.70 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 78J____________________ 1400X 250X 450_____________________ 101J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1400 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 145 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 146

=====================================================================

BEAM NO. 157 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1144. YES NO

B E A M N O. 157 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.19 KNS Vc= 85.85 KNS Vs= 0.00 KNS
Tu= 0.62 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.53 KNS Vc= 85.85 KNS Vs= 0.00 KNS
Tu= 0.62 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 83J____________________ 1399X 250X 450_____________________ 103J____

| |
||============================================================= |
| 2No12 H 393. 0.TO 1144 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 146 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 147

=====================================================================

BEAM NO. 158 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1027. YES NO

B E A M N O. 158 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.60 KNS Vc= 83.41 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.94 KNS Vc= 83.04 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 88J____________________ 1399X 250X 450_____________________ 105J____

| |
||====================================================== |
| 2No12 H 393. 0.TO 1027 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 147 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 148

=====================================================================

BEAM NO. 159 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1400. YES YES

B E A M N O. 159 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.56 KNS Vc= 84.32 KNS Vs= 0.00 KNS
Tu= 1.25 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.90 KNS Vc= 83.61 KNS Vs= 0.00 KNS
Tu= 1.25 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 79J____________________ 1400X 250X 450_____________________ 102J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1400 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 148 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 149

=====================================================================

BEAM NO. 160 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1144. YES NO

B E A M N O. 160 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.30 KNS Vc= 83.10 KNS Vs= 0.00 KNS
Tu= 1.15 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.64 KNS Vc= 83.34 KNS Vs= 0.00 KNS
Tu= 1.15 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 84J____________________ 1399X 250X 450_____________________ 104J____

| |
||============================================================= |
| 2No12 H 393. 0.TO 1144 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 149 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 150

=====================================================================

BEAM NO. 161 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 393. 2 - 12MM 0. 1027. YES NO

B E A M N O. 161 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.63 KNS Vc= 83.38 KNS Vs= 0.00 KNS
Tu= 1.20 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.97 KNS Vc= 83.03 KNS Vs= 0.00 KNS
Tu= 1.20 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 89J____________________ 1399X 250X 450_____________________ 106J____

| |
||====================================================== |
| 2No12 H 393. 0.TO 1027 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 150 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 151

=====================================================================

BEAM NO. 162 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 1777. YES NO
3 393. 2 - 12MM 2056. 4000. NO YES

B E A M N O. 162 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.19 KNS Vc= 84.65 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.36 KNS Vc= 83.94 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 81J____________________ 4000X 250X 450_____________________ 86J____

| |
||================================ ====================================||
| 2No12 H 393. 0.TO 1777 2No12 H 393.2056.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 151 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 152

=====================================================================

BEAM NO. 163 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 2 - 12MM 1344. 3900. NO YES

B E A M N O. 163 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.14 KNS Vc= 82.96 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.15 KNS Vc= 82.94 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 86J____________________ 3899X 250X 450_____________________ 91J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1094 2No12 H 393.1344.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 152 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 153

=====================================================================

BEAM NO. 164 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3404. YES NO

2 393. 2 - 12MM 0. 777. YES NO
3 393. 2 - 12MM 1056. 4000. NO YES

B E A M N O. 164 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.35 KNS Vc= 82.91 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.21 KNS Vc= 83.22 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 91J____________________ 4000X 250X 450_____________________ 96J____

| |
||============= =======================================================||
| 2No12 H 393. 0.TO2N777 H 393.1056.TO 4000 |
| |
| 2No12 H 57. 0.TO 3404 |
||=============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 153 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 154

=====================================================================

BEAM NO. 165 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 2111. YES NO
3 393. 2 - 12MM 1723. 4000. NO YES

B E A M N O. 165 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.75 KNS Vc= 82.92 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.81 KNS Vc= 86.61 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 80J____________________ 4000X 250X 450_____________________ 85J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2111 2No12 H 393.1723.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 154 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 155

=====================================================================

BEAM NO. 166 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 2 - 12MM 1344. 3900. NO YES

B E A M N O. 166 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.15 KNS Vc= 82.90 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.14 KNS Vc= 82.91 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 85J____________________ 3899X 250X 450_____________________ 90J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1094 2No12 H 393.1344.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 155 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 156

=====================================================================

BEAM NO. 167 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3102. YES NO

2 393. 2 - 12MM 0. 777. YES NO
3 393. 2 - 12MM 1389. 4000. NO YES

B E A M N O. 167 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.80 KNS Vc= 85.89 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.75 KNS Vc= 82.71 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 90J____________________ 4000X 250X 450_____________________ 95J____

| |
||============= =================================================||
| 2No12 H 393. 0.TO 777 2No12 H 393.1389.TO 4000 |
| |
| 2No12 H 57. 0.TO 3102 |
||========================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 156 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 157

=====================================================================

BEAM NO. 168 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 393. 2 - 12MM 0. 2111. YES NO
3 393. 2 - 12MM 2056. 4000. NO YES

B E A M N O. 168 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 5.07 KNS Vc= 82.74 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.49 KNS Vc= 114.69 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 97J____________________ 4000X 250X 450_____________________ 98J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2111 2No12 H 393.2056.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 157 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 158

=====================================================================

BEAM NO. 169 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 393. 2 - 12MM 0. 1094. YES NO
3 393. 2 - 12MM 1344. 3900. NO YES

B E A M N O. 169 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.14 KNS Vc= 85.85 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.15 KNS Vc= 85.85 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 98J____________________ 3899X 250X 450_____________________ 99J____

| |
||==================== =================================================||
| 2No12 H 393. 0.TO 1094 2No12 H 393.1344.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 158 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 159

=====================================================================

BEAM NO. 170 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2794. YES NO

2 393. 2 - 12MM 0. 777. YES NO
3 393. 2 - 12MM 1389. 4000. NO YES

B E A M N O. 170 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.47 KNS Vc= 126.92 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.08 KNS Vc= 82.69 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 99J____________________ 4000X 250X 450_____________________ 100J____

| |
||============= =================================================||
| 2No12 H 393. 0.TO 777 2No12 H 393.1389.TO 4000 |
| |
| 2No12 H 57. 0.TO 2794 |
||==================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 159 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 160

=====================================================================

BEAM NO. 171 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 348. YES NO

2 57. 2 - 12MM 403. 1000. NO YES
3 393. 2 - 12MM 0. 1000. YES YES

B E A M N O. 171 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 14.65 KNS Vc= 85.43 KNS Vs= 0.00 KNS
Tu= 0.69 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 14.05 KNS Vc= 85.43 KNS Vs= 0.00 KNS
Tu= 0.69 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 81J____________________ 999X 250X 450_____________________ 97J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1000 |
| |
| 2No12 H 57. 0.TO 348 2No12 H 57. 403.TO 1000 |
||========================= =============================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 160 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 161

=====================================================================

BEAM NO. 172 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 397. 1000. NO YES

2 393. 2 - 12MM 0. 1000. YES YES

B E A M N O. 172 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 15.38 KNS Vc= 85.36 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 14.78 KNS Vc= 85.36 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 86J____________________ 999X 250X 450_____________________ 98J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1000 |
| |
| 2No12 H 57. 397.TO 1000 |
| =============================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 161 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 162

=====================================================================

BEAM NO. 173 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1000. YES YES

2 393. 2 - 12MM 0. 1000. YES YES

B E A M N O. 173 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 15.38 KNS Vc= 85.37 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 14.78 KNS Vc= 85.37 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 91J____________________ 999X 250X 450_____________________ 99J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1000 |
| |
| 2No12 H 57. 0.TO 1000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 162 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 163

=====================================================================

BEAM NO. 174 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 221. 1000. NO YES

2 393. 2 - 12MM 0. 944. YES NO

B E A M N O. 174 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 14.66 KNS Vc= 85.43 KNS Vs= 0.00 KNS
Tu= 0.69 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 14.06 KNS Vc= 85.43 KNS Vs= 0.00 KNS
Tu= 0.69 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 96J____________________ 999X 250X 450_____________________ 100J____

| |
||====================================================================== |
| 2No12 H 393. 0.TO 944 |
| |
| 2No12 H 57. 221.TO 1000 |
| ===========================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 163 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 164

=====================================================================

BEAM NO. 175 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 393. 2 - 12MM 0. 877. YES NO
3 393. 2 - 12MM 314. 2600. NO YES

B E A M N O. 175 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.18 KNS Vc= 81.79 KNS Vs= 0.00 KNS
Tu= 0.31 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.02 KNS Vc= 83.44 KNS Vs= 0.00 KNS
Tu= 0.31 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 101J____________________ 2600X 250X 450_____________________ 83J____

| |
||=========================================================================||
| 2No12 H 393.2 H0.TO. 877.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 164 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 165

=====================================================================

BEAM NO. 176 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 393. 2 - 12MM 0. 661. YES NO
3 393. 2 - 12MM 314. 2600. NO YES

B E A M N O. 176 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.22 KNS Vc= 81.78 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.06 KNS Vc= 83.34 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 102J____________________ 2600X 250X 450_____________________ 84J____

| |
||=========================================================================||
| 2No12 H 393.2 H0.TO. 661.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 165 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 166

=====================================================================

BEAM NO. 177 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 393. 2 - 12MM 77. 2500. NO YES

B E A M N O. 177 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.30 KNS Vc= 85.85 KNS Vs= 0.00 KNS
Tu= 0.35 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.88 KNS Vc= 85.85 KNS Vs= 0.00 KNS
Tu= 0.35 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 103J____________________ 2500X 250X 450_____________________ 88J____

| |
| =========================================================================||
| 2No12 H 393. 77.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | oo | | oo | | oo | | oo | | oo |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 166 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 167

=====================================================================

BEAM NO. 178 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 393. 2 - 12MM 77. 2500. NO YES

B E A M N O. 178 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.39 KNS Vc= 81.77 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.97 KNS Vc= 82.62 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 104J____________________ 2500X 250X 450_____________________ 89J____

| |
| =========================================================================||
| 2No12 H 393. 77.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | oo | | oo | | oo | | oo | | oo |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 167 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 168

=====================================================================

BEAM NO. 179 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1842. YES NO

2 393. 2 - 12MM 0. 2600. YES YES

B E A M N O. 179 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.96 KNS Vc= 81.70 KNS Vs= 0.00 KNS
Tu= 0.36 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.80 KNS Vc= 83.03 KNS Vs= 0.00 KNS
Tu= 0.36 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 105J____________________ 2600X 250X 450_____________________ 93J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 1842 |
||==================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 168 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 169

=====================================================================

BEAM NO. 180 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1839. YES NO

2 393. 2 - 12MM 0. 2600. YES YES

B E A M N O. 180 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.14 KNS Vc= 81.72 KNS Vs= 0.00 KNS
Tu= 0.65 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.98 KNS Vc= 82.90 KNS Vs= 0.00 KNS
Tu= 0.65 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 106J____________________ 2600X 250X 450_____________________ 94J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 1839 |
||==================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 169 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 170

=====================================================================

BEAM NO. 181 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 577. YES NO
3 393. 2 - 12MM 156. 1600. NO YES

B E A M N O. 181 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.81 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.53 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.61 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.53 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 101J____________________ 1600X 250X 450_____________________ 110J____

| |
||=========================================================================||
| 2No12 HN393.H 30.TO15577O 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 170 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 171

=====================================================================

BEAM NO. 182 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 577. YES NO
3 393. 2 - 12MM 23. 1600. NO YES

B E A M N O. 182 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.75 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.42 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.56 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.42 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 103J____________________ 1600X 250X 450_____________________ 111J____

| |
||=========================================================================||
| 2No12 H 393. 20.TO 1577 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 171 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 172

=====================================================================

BEAM NO. 183 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 393. 2 - 12MM 0. 1600. YES YES

B E A M N O. 183 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.82 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.58 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.63 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.58 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 105J____________________ 1600X 250X 450_____________________ 112J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 172 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 173

=====================================================================

BEAM NO. 184 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 864. YES NO

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 184 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.90 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.54 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.89 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.54 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 107J____________________ 1900X 250X 450_____________________ 84J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 864 |
||================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 173 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 174

=====================================================================

BEAM NO. 185 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 185 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.86 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.57 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 6.85 KNS Vc= 85.33 KNS Vs= 0.00 KNS
Tu= 0.57 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 108J____________________ 1900X 250X 450_____________________ 89J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 174 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 175

=====================================================================

BEAM NO. 186 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 186 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.01 KNS Vc= 85.49 KNS Vs= 0.00 KNS
Tu= 0.51 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 7.00 KNS Vc= 85.49 KNS Vs= 0.00 KNS
Tu= 0.51 KN-MET Tc= 2.9 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 109J____________________ 1900X 250X 450_____________________ 94J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 175 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 176

=====================================================================

BEAM NO. 187 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1519. YES NO

2 57. 2 - 12MM 1821. 1900. NO YES
3 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 187 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.06 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.48 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.04 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.48 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 110J____________________ 1900X 250X 450_____________________ 102J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1519 2No12 H 57.1821.TO 1900 |
||=========================================================== ===||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | 2#12 |
| oo | | oo | | oo | | oo | | | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 176 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 177

=====================================================================

BEAM NO. 188 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1517. YES NO

2 57. 2 - 12MM 1662. 1900. NO YES
3 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 188 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.97 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.37 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.96 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.37 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 111J____________________ 1900X 250X 450_____________________ 104J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1517 2No12 H 57.1662.TO 1900 |
||=========================================================== =========||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | 2#12 |
| oo | | oo | | oo | | oo | | | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 177 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 178

=====================================================================

BEAM NO. 189 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 393. 2 - 12MM 0. 1900. YES YES

B E A M N O. 189 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.05 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.46 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 5.04 KNS Vc= 85.86 KNS Vs= 0.00 KNS
Tu= 0.46 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 112J____________________ 1900X 250X 450_____________________ 106J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 178 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 179

=====================================================================

BEAM NO. 190 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 393. 2 - 12MM 0. 2600. YES YES

B E A M N O. 190 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.60 KNS Vc= 85.88 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.25 KNS Vc= 85.88 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 110J____________________ 2600X 250X 450_____________________ 107J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 179 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 180

=====================================================================

BEAM NO. 191 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 393. 2 - 12MM 0. 2500. YES YES

B E A M N O. 191 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.46 KNS Vc= 85.88 KNS Vs= 0.00 KNS
Tu= 0.11 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.12 KNS Vc= 85.88 KNS Vs= 0.00 KNS
Tu= 0.11 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 111J____________________ 2500X 250X 450_____________________ 108J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 180 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 181

=====================================================================

BEAM NO. 192 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 250. X 450. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2211. YES NO

2 393. 2 - 12MM 0. 2600. YES YES

B E A M N O. 192 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.60 KNS Vc= 81.76 KNS Vs= 0.00 KNS
Tu= 0.11 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.24 KNS Vc= 83.46 KNS Vs= 0.00 KNS
Tu= 0.11 KN-MET Tc= 3.0 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 112J____________________ 2600X 250X 450_____________________ 109J____

| |
||=========================================================================||
| 2No12 H 393. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 2211 |
||=============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 181 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 182

=====================================================================

BEAM NO. 225 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2421. YES NO

2 293. 2 - 12MM 0. 3200. YES YES

B E A M N O. 225 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.95 KNS Vc= 49.14 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.39 KNS Vc= 48.89 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 113J____________________ 3200X 200X 350_____________________ 114J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 3200 |
| |
| 2No12 H 57. 0.TO 2421 |
||======================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 182 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 183

=====================================================================

BEAM NO. 226 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2357. YES NO

2 293. 2 - 12MM 0. 633. YES NO
3 293. 2 - 12MM 1263. 3500. NO YES

B E A M N O. 226 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.02 KNS Vc= 51.25 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.81 KNS Vc= 51.25 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 114J____________________ 3500X 200X 350_____________________ 115J____

| |
||============ ================================================||
| 2No12 H 293. 0.TO 633 2No12 H 293.1263.TO 3500 |
| |
| 2No12 H 57. 0.TO 2357 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 183 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 184

=====================================================================

BEAM NO. 227 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 293. 2 - 12MM 0. 1508. YES NO
3 293. 2 - 12MM 1554. 3500. NO YES

B E A M N O. 227 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.18 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.64 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 115J____________________ 3499X 200X 350_____________________ 116J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1508 2No12 H 293.1554.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 184 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 185

=====================================================================

BEAM NO. 228 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2084. YES NO

2 293. 2 - 12MM 0. 600. YES NO
3 293. 2 - 12MM 1079. 3100. NO YES

B E A M N O. 228 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.53 KNS Vc= 51.05 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.63 KNS Vc= 51.05 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 116J____________________ 3100X 200X 350_____________________ 117J____

| |
||============= =================================================||
| 2No12 H 293. 0.TO 600 2No12 H 293.1079.TO 3100 |
| |
| 2No12 H 57. 0.TO 2084 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 185 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 186

=====================================================================

BEAM NO. 229 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 293. 2 - 12MM 0. 1675. YES NO
3 293. 2 - 12MM 2192. 3200. NO YES

B E A M N O. 229 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.23 KNS Vc= 48.95 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.10 KNS Vc= 49.01 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 118J____________________ 3200X 200X 350_____________________ 119J____

| |
||====================================== =======================||
| 2No12 H 293. 0.TO 1675 2No12 H 293.2192.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 186 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 187

=====================================================================

BEAM NO. 230 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 293. 2 - 12MM 0. 741. YES NO
3 293. 2 - 12MM 1192. 1600. NO YES

B E A M N O. 230 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.09 KNS Vc= 49.07 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.40 KNS Vc= 48.74 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 119J____________________ 1600X 200X 350_____________________ 143J____

| |
||================================== ===================||
| 2No12 H 293. 0.TO 741 2No12 H 293.1192.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 187 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 188

=====================================================================

BEAM NO. 231 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3500. YES YES

2 293. 2 - 12MM 0. 3500. YES YES

B E A M N O. 231 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.37 KNS Vc= 51.23 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.46 KNS Vc= 51.23 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 120J____________________ 3499X 200X 350_____________________ 121J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 3500 |
| |
| 2No12 H 57. 0.TO 3500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 188 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 189

=====================================================================

BEAM NO. 232 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1827. YES NO

2 293. 2 - 12MM 0. 3100. YES YES

B E A M N O. 232 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.51 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.66 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 121J____________________ 3100X 200X 350_____________________ 122J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 3100 |
| |
| 2No12 H 57. 0.TO 1827 |
||=========================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 189 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 190

=====================================================================

BEAM NO. 233 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 645. 3200. NO YES

2 293. 2 - 12MM 0. 3200. YES YES

B E A M N O. 233 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.23 KNS Vc= 48.95 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.10 KNS Vc= 49.01 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 123J____________________ 3200X 200X 350_____________________ 124J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 3200 |
| |
| 2No12 H 57. 645.TO 3200 |
| ============================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 190 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 191

=====================================================================

BEAM NO. 234 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 293. 2 - 12MM 0. 1600. YES YES

B E A M N O. 234 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.09 KNS Vc= 49.07 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.40 KNS Vc= 48.74 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 124J____________________ 1600X 200X 350_____________________ 144J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 191 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 192

=====================================================================

BEAM NO. 235 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 706. 3500. NO YES

2 293. 2 - 12MM 0. 1800. YES NO
3 293. 2 - 12MM 2429. 3500. NO YES

B E A M N O. 235 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.37 KNS Vc= 51.23 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.46 KNS Vc= 51.23 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 125J____________________ 3499X 200X 350_____________________ 126J____

| |
||====================================== =======================||
| 2No12 H 293. 0.TO 1800 2No12 H 293.2429.TO 3500 |
| |
| 2No12 H 57. 706.TO 3500 |
| ============================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 192 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 193

=====================================================================

BEAM NO. 236 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 293. 2 - 12MM 0. 600. YES NO
3 293. 2 - 12MM 1338. 3100. NO YES

B E A M N O. 236 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.50 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.66 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 126J____________________ 3100X 200X 350_____________________ 127J____

| |
||============= ===========================================||
| 2No12 H 293. 0.TO 600 2No12 H 293.1338.TO 3100 |
| |
| 2No12 H 57. 0.TO 3100 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | | | oo | | oo | | oo |
| 2#12 | | | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 193 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 194

=====================================================================

BEAM NO. 237 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3200. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3200. YES YES

2 293. 2 - 12MM 0. 608. YES NO
3 293. 2 - 12MM 1925. 3200. NO YES

B E A M N O. 237 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.95 KNS Vc= 49.16 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.38 KNS Vc= 48.90 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 128J____________________ 3200X 200X 350_____________________ 129J____

| |
||============= ==============================||
| 2No12 H 293. 0.TO 608 2No12 H 293.1925.TO 3200 |
| |
| 2No12 H 57. 0.TO 3200 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | | | | | oo | | oo |
| 2#12 | | | | | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 194 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 195

=====================================================================

BEAM NO. 238 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1600. YES YES

2 293. 2 - 12MM 0. 1600. YES YES

B E A M N O. 238 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.01 KNS Vc= 51.25 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 0.32 KNS Vc= 51.25 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 129J____________________ 1600X 200X 350_____________________ 145J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1600 |
| |
| 2No12 H 57. 0.TO 1600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 195 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 196

=====================================================================

BEAM NO. 239 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 415. 3500. NO YES

2 293. 2 - 12MM 0. 2091. YES NO
3 293. 2 - 12MM 2429. 3500. NO YES

B E A M N O. 239 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.18 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.65 KNS Vc= 51.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 130J____________________ 3499X 200X 350_____________________ 131J____

| |
||============================================ =======================||
| 2No12 H 293. 0.TO 2091 2No12 H 293.2429.TO 3500 |
| |
| 2No12 H 57. 415.TO 3500 |
| ==================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 196 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 197

=====================================================================

BEAM NO. 240 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3100. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3100. YES YES

2 293. 2 - 12MM 0. 3100. YES YES

B E A M N O. 240 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 1.53 KNS Vc= 51.05 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.64 KNS Vc= 51.05 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 131J____________________ 3100X 200X 350_____________________ 132J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 3100 |
| |
| 2No12 H 57. 0.TO 3100 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 197 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 198

=====================================================================

BEAM NO. 241 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 293. 2 - 12MM 0. 2008. YES NO
3 293. 2 - 12MM 1825. 4000. NO YES

B E A M N O. 241 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.81 KNS Vc= 49.10 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.84 KNS Vc= 49.09 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 113J____________________ 4000X 200X 350_____________________ 118J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 2008 2No12 H 293.1825.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 198 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 199

=====================================================================

BEAM NO. 242 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 293. 2 - 12MM 0. 991. YES NO
3 293. 2 - 12MM 1771. 3900. NO YES

B E A M N O. 242 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.74 KNS Vc= 48.98 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.75 KNS Vc= 48.98 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 118J____________________ 3899X 200X 350_____________________ 123J____

| |
||================== =========================================||
| 2No12 H 293. 0.TO 991 2No12 H 293.1771.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 199 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 200

=====================================================================

BEAM NO. 243 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3034. YES NO

2 293. 2 - 12MM 0. 1008. YES NO
3 293. 2 - 12MM 1492. 4000. NO YES

B E A M N O. 243 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.83 KNS Vc= 49.00 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.82 KNS Vc= 49.01 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 123J____________________ 4000X 200X 350_____________________ 128J____

| |
||================== ===============================================||
| 2No12 H 293. 0.TO 1008 2No12 H 293.1492.TO 4000 |
| |
| 2No12 H 57. 0.TO 3034 |
||======================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 200 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 201

=====================================================================

BEAM NO. 244 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 293. 2 - 12MM 0. 1400. YES YES

B E A M N O. 244 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.95 KNS Vc= 48.97 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.59 KNS Vc= 49.09 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 114J____________________ 1400X 200X 350_____________________ 137J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1400 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 201 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 202

=====================================================================

BEAM NO. 245 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 293. 2 - 12MM 0. 1041. YES NO

B E A M N O. 245 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.75 KNS Vc= 48.97 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.38 KNS Vc= 48.94 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 119J____________________ 1399X 200X 350_____________________ 139J____

| |
||======================================================= |
| 2No12 H 293. 0.TO 1041 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 202 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 203

=====================================================================

BEAM NO. 246 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 293. 2 - 12MM 0. 925. YES NO

B E A M N O. 246 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.70 KNS Vc= 48.99 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.34 KNS Vc= 48.88 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 124J____________________ 1399X 200X 350_____________________ 141J____

| |
||================================================= |
| 2No12 H 293. 0.TO 925 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 203 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 204

=====================================================================

BEAM NO. 247 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 293. 2 - 12MM 0. 1400. YES YES

B E A M N O. 247 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.90 KNS Vc= 48.99 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.53 KNS Vc= 49.02 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 115J____________________ 1400X 200X 350_____________________ 138J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1400 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 204 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 205

=====================================================================

BEAM NO. 248 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 293. 2 - 12MM 0. 1041. YES NO

B E A M N O. 248 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.75 KNS Vc= 48.97 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.38 KNS Vc= 48.92 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 120J____________________ 1399X 200X 350_____________________ 140J____

| |
||======================================================= |
| 2No12 H 293. 0.TO 1041 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 205 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 206

=====================================================================

BEAM NO. 249 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1400. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1400. YES YES

2 293. 2 - 12MM 0. 925. YES NO

B E A M N O. 249 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.75 KNS Vc= 48.98 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 1.39 KNS Vc= 48.89 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 125J____________________ 1399X 200X 350_____________________ 142J____

| |
||================================================= |
| 2No12 H 293. 0.TO 925 |
| |
| 2No12 H 57. 0.TO 1400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 206 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 207

=====================================================================

BEAM NO. 250 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 293. 2 - 12MM 0. 1341. YES NO
3 293. 2 - 12MM 2492. 4000. NO YES

B E A M N O. 250 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.76 KNS Vc= 49.22 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.89 KNS Vc= 49.12 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 117J____________________ 4000X 200X 350_____________________ 122J____

| |
||======================== ============================||
| 2No12 H 293. 0.TO 1341 2No12 H 293.2492.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | | | oo | | oo |
| 2#12 | | 2#12 | | | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 207 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 208

=====================================================================

BEAM NO. 251 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 293. 2 - 12MM 0. 991. YES NO
3 293. 2 - 12MM 1771. 3900. NO YES

B E A M N O. 251 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.74 KNS Vc= 49.03 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.74 KNS Vc= 49.02 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 122J____________________ 3899X 200X 350_____________________ 127J____

| |
||================== =========================================||
| 2No12 H 293. 0.TO 991 2No12 H 293.1771.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 208 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 209

=====================================================================

BEAM NO. 252 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3372. YES NO

2 293. 2 - 12MM 0. 1008. YES NO
3 293. 2 - 12MM 825. 4000. NO YES

B E A M N O. 252 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.89 KNS Vc= 49.07 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.76 KNS Vc= 49.15 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 127J____________________ 4000X 200X 350_____________________ 132J____

| |
||=========================================================================||
| 2No12 H 293. 20.TO 10083. 825.TO 4000 |
| |
| 2No12 H 57. 0.TO 3372 |
||=============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 209 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 210

=====================================================================

BEAM NO. 253 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 293. 2 - 12MM 0. 2008. YES NO
3 293. 2 - 12MM 2159. 4000. NO YES

B E A M N O. 253 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.99 KNS Vc= 48.98 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.66 KNS Vc= 49.12 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 116J____________________ 4000X 200X 350_____________________ 121J____

| |
||===================================== ==================================||
| 2No12 H 293. 0.TO 2008 2No12 H 293.2159.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 210 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 211

=====================================================================

BEAM NO. 254 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 293. 2 - 12MM 0. 991. YES NO
3 293. 2 - 12MM 1771. 3900. NO YES

B E A M N O. 254 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.74 KNS Vc= 49.01 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.75 KNS Vc= 49.01 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 121J____________________ 3899X 200X 350_____________________ 126J____

| |
||================== =========================================||
| 2No12 H 293. 0.TO 991 2No12 H 293.1771.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 211 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 212

=====================================================================

BEAM NO. 255 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3035. YES NO

2 293. 2 - 12MM 0. 675. YES NO
3 293. 2 - 12MM 1159. 4000. NO YES

B E A M N O. 255 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.66 KNS Vc= 49.10 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.99 KNS Vc= 48.96 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 126J____________________ 4000X 200X 350_____________________ 131J____

| |
||=========== =====================================================||
| 2No12 H 293. 0.TO 67512 H 293.1159.TO 4000 |
| |
| 2No12 H 57. 0.TO 3035 |
||======================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 212 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 213

=====================================================================

BEAM NO. 256 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 4000. YES YES

2 293. 2 - 12MM 0. 2008. YES NO
3 293. 2 - 12MM 2159. 4000. NO YES

B E A M N O. 256 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.06 KNS Vc= 48.98 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.59 KNS Vc= 49.25 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 133J____________________ 4000X 200X 350_____________________ 134J____

| |
||===================================== ==================================||
| 2No12 H 293. 0.TO 2008 2No12 H 293.2159.TO 4000 |
| |
| 2No12 H 57. 0.TO 4000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 213 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 214

=====================================================================

BEAM NO. 257 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 3900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3900. YES YES

2 293. 2 - 12MM 0. 991. YES NO
3 293. 2 - 12MM 1771. 3900. NO YES

B E A M N O. 257 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.74 KNS Vc= 49.00 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.74 KNS Vc= 48.99 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 134J____________________ 3899X 200X 350_____________________ 135J____

| |
||================== =========================================||
| 2No12 H 293. 0.TO 991 2No12 H 293.1771.TO 3900 |
| |
| 2No12 H 57. 0.TO 3900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 214 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 215

=====================================================================

BEAM NO. 258 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 4000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3034. YES NO

2 293. 2 - 12MM 0. 675. YES NO
3 293. 2 - 12MM 1159. 4000. NO YES

B E A M N O. 258 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.59 KNS Vc= 49.19 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.06 KNS Vc= 48.95 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 135J____________________ 4000X 200X 350_____________________ 136J____

| |
||=========== =====================================================||
| 2No12 H 293. 0.TO 67512 H 293.1159.TO 4000 |
| |
| 2No12 H 57. 0.TO 3034 |
||======================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 215 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 216

=====================================================================

BEAM NO. 259 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 421. YES NO

2 57. 2 - 12MM 489. 1000. NO YES
3 293. 2 - 12MM 0. 1000. YES YES

B E A M N O. 259 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.85 KNS Vc= 50.98 KNS Vs= 0.00 KNS
Tu= 0.27 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.14 KNS Vc= 50.98 KNS Vs= 0.00 KNS
Tu= 0.27 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 117J____________________ 999X 200X 350_____________________ 133J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1000 |
| |
| 2No12 H 57. 0.TO 421 2No12 H 57. 489.TO 1000 |
||=============================== ======================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 216 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 217

=====================================================================

BEAM NO. 260 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 506. 1000. NO YES

2 293. 2 - 12MM 0. 1000. YES YES

B E A M N O. 260 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.79 KNS Vc= 51.01 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.08 KNS Vc= 51.01 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 122J____________________ 999X 200X 350_____________________ 134J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1000 |
| |
| 2No12 H 57. 506.TO 1000 |
| =====================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| | | | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 217 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 218

=====================================================================

BEAM NO. 261 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 506. YES NO

2 57. 2 - 12MM 592. 1000. NO YES
3 293. 2 - 12MM 0. 1000. YES YES

B E A M N O. 261 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.79 KNS Vc= 51.01 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.09 KNS Vc= 51.01 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 127J____________________ 999X 200X 350_____________________ 135J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1000 |
| |
| 2No12 H 57. 0.TO 506 2No12 H 57. 592.TO 1000 |
||===================================== ===============================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 218 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 219

=====================================================================

BEAM NO. 262 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1000. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 405. 1000. NO YES

2 293. 2 - 12MM 0. 925. YES NO

B E A M N O. 262 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.86 KNS Vc= 50.98 KNS Vs= 0.00 KNS
Tu= 0.27 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.16 KNS Vc= 50.98 KNS Vs= 0.00 KNS
Tu= 0.27 KN-MET Tc= 1.4 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 132J____________________ 999X 200X 350_____________________ 136J____

| |
||===================================================================== |
| 2No12 H 293. 0.TO 925 |
| |
| 2No12 H 57. 405.TO 1000 |
| =============================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | | | | | | | |
| | | | | | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 219 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 220

=====================================================================

BEAM NO. 263 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 293. 2 - 12MM 0. 558. YES NO
3 293. 2 - 12MM 634. 2600. NO YES

B E A M N O. 263 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.64 KNS Vc= 48.77 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.70 KNS Vc= 49.07 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 137J____________________ 2600X 200X 350_____________________ 119J____

| |
||=============== =========================================================||
| 2No12 H 293. 0.TOo1558 293. 634.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 220 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 221

=====================================================================

BEAM NO. 264 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2600. YES YES

2 293. 2 - 12MM 0. 341. YES NO
3 293. 2 - 12MM 634. 2600. NO YES

B E A M N O. 264 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.59 KNS Vc= 48.76 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.75 KNS Vc= 49.06 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 138J____________________ 2600X 200X 350_____________________ 120J____

| |
||======== =========================================================||
| 2No12 H 293. 0.TOo1341 293. 634.TO 2600 |
| |
| 2No12 H 57. 0.TO 2600 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 221 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 222

=====================================================================

BEAM NO. 265 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 293. 2 - 12MM 179. 2500. NO YES

B E A M N O. 265 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.44 KNS Vc= 48.74 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.74 KNS Vc= 48.99 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 139J____________________ 2500X 200X 350_____________________ 124J____

| |
| ======================================================================||
| 2No12 H 293. 179.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | oo | | oo | | oo | | oo | | oo |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 222 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 223

=====================================================================

BEAM NO. 266 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2500. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 2500. YES YES

2 293. 2 - 12MM 179. 2500. NO YES

B E A M N O. 266 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.44 KNS Vc= 48.74 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.74 KNS Vc= 49.01 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 140J____________________ 2500X 200X 350_____________________ 125J____

| |
| ======================================================================||
| 2No12 H 293. 179.TO 2500 |
| |
| 2No12 H 57. 0.TO 2500 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| | | oo | | oo | | oo | | oo | | oo |
| | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 223 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 224

=====================================================================

BEAM NO. 267 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1767. YES NO

2 293. 2 - 12MM 0. 2600. YES YES

B E A M N O. 267 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.39 KNS Vc= 48.74 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.95 KNS Vc= 48.95 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 141J____________________ 2600X 200X 350_____________________ 129J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 1767 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 224 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 225

=====================================================================

BEAM NO. 268 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 2600. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1768. YES NO

2 293. 2 - 12MM 0. 2600. YES YES

B E A M N O. 268 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.45 KNS Vc= 48.74 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.90 KNS Vc= 48.98 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 142J____________________ 2600X 200X 350_____________________ 130J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 2600 |
| |
| 2No12 H 57. 0.TO 1768 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | |
| oo | | oo | | oo | | oo | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 225 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 226

=====================================================================

BEAM NO. 272 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 973. YES NO

2 293. 2 - 12MM 0. 1900. YES YES

B E A M N O. 272 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.54 KNS Vc= 48.75 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.73 KNS Vc= 48.85 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 143J____________________ 1900X 200X 350_____________________ 120J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 973 |
||===================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | | | | | |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 226 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 227

=====================================================================

BEAM NO. 273 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 293. 2 - 12MM 0. 1900. YES YES

B E A M N O. 273 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.55 KNS Vc= 48.75 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.73 KNS Vc= 48.85 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 144J____________________ 1900X 200X 350_____________________ 125J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 227 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 228

=====================================================================

BEAM NO. 274 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08

LEN - 1900. MM FY - 414. FC - 28. MPA, SIZE - 200. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 1900. YES YES

2 293. 2 - 12MM 0. 1900. YES YES

B E A M N O. 274 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 0.63 KNS Vc= 51.25 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.82 KNS Vc= 51.25 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.

___ 145J____________________ 1900X 200X 350_____________________ 130J____

| |
||=========================================================================||
| 2No12 H 293. 0.TO 1900 |
| |
| 2No12 H 57. 0.TO 1900 |
||=========================================================================||
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______|

********************END OF BEAM DESIGN**************************

139. CONCRETE TAKE

140. END CONCRETE DESIGN

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 228 of 229

 Friday, February 20, 2015, 09:22 AM
STAAD SPACE -- PAGE NO. 229

************** CONCRETE TAKE OFF **************

(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.

TOTAL VOLUME OF CONCRETE = 77.3 CU.METER

BAR SIZE WEIGHT

NUMBER (in lbs)
-------- --------
12 5005
16 747
20 4417
25 407
32 83
------------
*** TOTAL= 10659

141. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= FEB 20,2015 TIME= 9:21:23 ****

************************************************************
* For questions on STAAD.Pro, please contact *
* Bentley Systems or Partner offices *
* *
* Telephone Web / Email *
* USA +1 (714) 974-2500 *
* UK +44 (0) 808 101 9246 *
* SINGAPORE +65 6225-6158 *
* FRANCE +33 (0) 1 55238400 *
* GERMANY +49 0931 40468 *
* INDIA +91 (033) 4006-2021 *
* JAPAN +81 (03)5952-6500 http://www.ctc-g.co.jp *
* CHINA +86 21 6288 4040 *
* THAILAND +66 (0)2645-1018/19 [email protected]*
* *
* Worldwide http://selectservices.bentley.com/en-US/ *
* *
************************************************************

C:\Users\Jerone\Documents\Dado\FINAL ANALYSIS_DADO.anl Page 229 of 229