Using Excel to Clean and Prepare Data

for Analysis
R. Jason Weiss
Development Dimensions International
Robert J. Townsend
California State UniversityFullerton
Cleaning data and preparing it for analysis is one of those
thankless jobs that is dull, laborious, and painstaking, no matter which way you
slice it. The cost of a mistake is considerable, too, as you will discover if you
try to report an observed F of 317. We think the burden can be greatly reduced
with some help from our old friend, Excel. Its true that many of us already use
Excel to clean and prepare data for analysis, but our sense is that few people
leverage Excels considerable strengths in a systematic way. In this article, we
describe a power users approach to cleaning and preparing your data with
Excel. We suggest a phased approach that produces analysis-ready data with-
out destroying the original dataset. Well also look at ways to document your
dataset so that it will make sense when reviewed at a later point, or by other peo-
ple. We conclude with a note about a presentation at the upcoming SIOP con-
ference that needs your input!

A Phased Approach to Data Preparation

Why is cleaning and preparing data such a pain? Part of the problem is
the lack of an easy, sensible, and common process. Another is the fact that
people rarely document their datasets effectivelyhow often have you looked
at a folder with three slightly different files, all named some variant of Final
Project Data.dat, and wondered which one was the real dataset you used for
your analyses 6 months ago? A third source of frustration, which follows from
the second, is that its easy to lose your place if you get distracted or have to
correct a mistake you made several changes earlier. Oh nuts Did I just undo
the recoding of those reverse-coded items? Better start over, just to be sure.
You and your data deserve better. We certainly wont say that the process
we propose is ideal or necessarily suitable for all circumstances. We do feel,
though, that it reflects some of the best practices weve discovered over many
combined years of working with data in Excel. Plus, its a process you can
use consistently, which helps you in two ways: First, it replaces the need to
reinvent the wheel every time you work with data. Second, once you know
The Industrial-Organizational Psychologist 89
the process, you can quickly understand any data file created with it. Lets
start with a brief look at the main steps in the process:
1. Create the data file. We will use several worksheets within a single
Excel file to represent our data at each major stage of the process, from our
initial raw data through several stages of transformation to the final, analysis-
ready dataset.
2. Clean the data. In this stage, we remove any elements we dont want
to leave in our dataset, such as duplicate entries, out-of-range data, and extra-
neous characters. The outcome is a clean set of raw data.
3. Process the data. The processing stage is where we prepare the
cleaned raw data for analysis through parsing, recoding, reformatting, and
other actions.
4. Create an analysis-ready copy of the data. Here, we copy the final
set of data for import into a statistics package.
5. Document the data. Finally, we add any necessary documentation to
the data file so that the actions taken on the data are clear when the file is
revisited by others or at a later date.

Step 1. Create the Data File

We recommend creating separate worksheets in an Excel data file for
each logical step in the data cleaning process. This has a number of benefits.
First, the original data and all transformations are preserved, so it does not
require much effort to back up a step. Second, the worksheet labels make
clear the main differences between the worksheets. Finally, you never have
to play detective to figure out the differences between multiple files con-
taining what look like the same data.
Following are the worksheets we will use:
Original Data. This worksheet contains the data as originally captured
or entered. No actions will be taken on this worksheet except to copy the data
to the next sheet, where we will clean and process it. This worksheet, then,
exists solely to maintain a pristine copy of the base dataset.
Interim Data. This starts out as a copy of the original data, which is then
cleaned and processed to produce analysis-ready data.
Final Data. This sheet contains a literal copy of the columns and rows
of data you plan to use in your analyses. We discuss below why it is neces-
sary to have a separate worksheet for your final data.
Setting up your worksheets is simple. By default, Excel opens with three
worksheets available. Additional worksheets can be added to the workbook
by selecting Insert | Worksheet. The default names for the worksheets are
Sheet1, Sheet2, and so forth. You can change these by doubleclicking on the
worksheet names on the tabs at the bottom of the screen, or by clicking For-
mat | Sheet | Rename. Note that Excel sometimes abbreviates worksheet
as simply sheet. Dont worry, the two terms are synonymous.

90 January 2005 Volume 42 Number 3

 A quick word of advice on naming your worksheets: Excel permits spaces
in worksheet names, but these become onerous in functions that refer to cells
across worksheets. We suggest following a convention of using upper- and
lowercase letters to suggest word separation in worksheet names. For exam-
ple, OriginalData is a perfectly legible worksheet name. Alternately, use
underscore characters for spaces, for example, Processed_Data. With that
said, we will maintain spaces within worksheet names as a means of main-
taining readability through the remainder of this article.
We will use the example of a standard data cleaning task in which we
manipulate a single data file, displayed as Exhibit 1. The file we are using is
based on fictional data culled from the equally fictional Weiss Circus Clown
Selection Test-Revised, which has swelled to 10 items, two of which are
reverse coded (see Weiss, 2004b for more information on the original
WCCST). The file is available for download at http://www.jasonweiss.net/
html/excel_tips_and_tools.html if you wish to follow along with the dataset.

Exhibit 1. Sample Dataset.

Step 2. Clean the Data

The goal of the data cleaning process is to preserve meaningful data
while removing elements that may impede our ability to run the analyses
effectively or otherwise affect the quality of the statistics that result. Candi-
dates for removal include duplicate records, extraneous characters within
cells, or out-of-range values. Note that we will be acting directly on the
data during this phase, though we can always hit the undo button if we
make a mistake. The first step is to copy the data over from the Original-
Data sheet to the InterimData sheet. To do so, highlight all cells in the
OriginalData sheet directly or by typing CTRL+A on your keyboard.
Copy the data and paste it into the InterimData sheet.
Before we start cleaning, we will assign each row in the spreadsheet an
ID number. This way, if we delete a row (presumably because its a dupli-
cate), we can tell from the gaps in ID numbers where the deleted rows were.

The Industrial-Organizational Psychologist 91

Its a pretty simple process to create an ID: Insert a column to the left of col-
umn A and input the number 1 into the cell next to the first row of data (cell
A2). Highlight the cells that need to be numbered, click Edit | Fill |
Series, input a step value of 1, and hit OK. In our example, the cells will now
be numbered from 1 to 11. Now were ready to proceed with the cleaning.
Manage duplicate records. A common step in preparing data for a stats
program is searching for and removing duplicate entries. Our strategy is to
create a key that uniquely identifies each person in the dataset; we will then
sort the data based on this key and check if the key shows up in adjacent
rows. We create the key by copying the values of the First Name, MI, Last
Name, and Street Address cells and concatenating them into one cell. Happi-
ly, Excels CONCATENATE() function does all of the hard work for us. In
Row 2 of the first empty column, enter the following formula: =CON-
CATENATE(A2,B2,C2,D2). Now that we have our key, we need to search
for duplicates. First, we need to sort by our keys. Click on Data | Sort and
select the column containing the key (Column R in our example). With the
data sorted, we can then proceed to check if the key shows up in adjacent
rows. In Row 2 of the first empty column, enter =EXACT(R2,R3) and copy
the formula down to the remaining cells. The EXACT() function returns
TRUE if the values it is given are identical, and FALSE otherwise.
Heres a power users hint. In a large dataset, it can become tiresome to
locate all the TRUE cells. A simple way around this is to automatically for-
mat all the TRUE cells to a different color. Select the test column and click
on Format | Conditional Formatting. Arrange the drop down boxes to
read Cell Value Is Equal To TRUE. Select the Format button, fol-
lowed by the Patterns tab, then choose the color to highlight the cell if the
function value is true. As Exhibit 2 shows, the conditional formatting has
highlighted a duplicate entry for Kay Rodriguez.

Exhibit 2. Spreadsheet after searching for duplicates

Strip out undesirable characters. Often, our data have undesirable char-
acters that are useful for visually displaying the information but can trip up sta-
tistical analyses. Consider the phone number column, for example. We want

92 January 2005 Volume 42 Number 3

to remove the unwanted periods, dashes, and parentheses so that every phone
number contains numbers only. An easy way to do this is to use Excels
Find/Replace functionality. Start by highlighting Column F, which contains
the phone numbers. Next, select Edit | Replace and click the Options button
for the advanced view. Enter a dash in the Find what field, leave the Replace
with field blank, and make sure that the Match entire cell contents box is
unchecked. When you hit the Replace all button, all dashes will be removed.
Follow the same process to remove spaces, periods, parentheses, and so forth.
If you need to repeat this cleaning process often, you can record a macro to
take the drudgework out of it. See Weiss (2004a) for more information on
macros. To record your macro, start by selecting a cell in the column that has
characters that need to be replaced. Click Tools | Macro | Record Macro
and select the shortcut key that you would like to use; in our example we will
use CTRL+E. After you click OK, a small toolbar will appear with two but-
tons, Stop and Relative Reference. The Stop button stops the macro recorder.
The Relative Reference button requires some explanation. When the Relative
Reference button is selected, the macro will start relative to the currently active
cell. If it is not selected, macros will always begin from the same absolute posi-
tion on the worksheet. In this example, we want to select relative references so
that we dont end up cleaning the same column of data every time we invoke
the macro. The macro recorder captures all of your activities within Excel until
you click the Stop button. Simply follow the find/replace process outlined
above for each character you wish to remove, and then press the Stop button
on the macro toolbar at the end. You can then use CTRL+E to run the macro
anytime you need to clean extraneous characters from your data.
Locate out-of-range values. Ensuring that your data are in the correct
range is critical. Because the WCCST-R items range in value from 1 to 5,
observing a 6 in the dataset indicates real cause for concern. In the case of
telephone numbers, 10-digit telephone numbers are useful; 9- or 11-digit
numbers require further attention and possibly a review of the source data.
One easy way to find telephone numbers with too many/few numbers is to
use the LEN() function to count the number of characters. Enter =LEN(F2)
into Row 2 of a new column and copy the formula down the column. Next,
use conditional formatting as described above to highlight out-of-range
phone numbers for further attention.

Step 3. Process the Data

Our main goal in this stage is to refine the data for our eventual statistical
analysis. We will illustrate how to parse data from one column into several
others, and how to recode and reformat data for consistency. This is, of
course, just the tip of the icebergthere is a vast array of processing activi-
ties that might be undertaken when you are processing data. We intend mere-
ly to illustrate some of the more compelling possibilities that Excel enables.

The Industrial-Organizational Psychologist 93

 Parse data. There are a number of ways to parse the data in one cell and
return the output to others. Possibly the simplest is Excels built-in parsing
wizard, which can be found under Data | Text to Columns. The wizard
splits cell data at delimiters that you specify, such as commas, tabs, or spaces,
and puts the output into separate cells. Consider, for example, the City, State
ZIP data. We parse this into separate columns by running the wizard and
selecting the comma as a delimiter to separate the city name from the state
and ZIP code. Next we run the wizard again and specify the space as a delim-
iter within the state and ZIP code column output by the first wizard. It may
have occurred to you that we could try running the wizard just once and hav-
ing it parse on both the space and comma. This would work for most data.
However, if the data includes city names with internal spaces (e.g., Los Ange-
les), each component will get its own column. The two-part process is a step
more laborious but also more effective.
Outside of the wizard, Excel has a number of functions that let you parse
characters directly. For example, the LEFT(), RIGHT(), and MID() functions
return a specified number of characters from a target. The difference between
them is in where they begin counting, and in which direction. The LEFT()
and RIGHT() functions pull the left-most and right-most n characters from a
target, respectively. The MID() function starts at a point you specify within
a target and returns the next n characters. For example, if we wanted to pull
the area code information out of a phone number, we would enter the fol-
lowing formula into a new cell: =LEFT(F2, 3). This formula would then
extract the left-most three characters from cell F2.
Recode data. Excel does not have anything built expressly for the pur-
pose of recoding data, such as SPSSs Recode command. However, if your
data are simply reverse coded, you can write a quick and easy formula to
realign the data. Consider, for example, WCCST R Item 3, which ranges from
15 and is reverse coded. Entering the formula =6 J2 in Row 2 of the first
available column and copying the formula down to the rest of the rows does
the trick nicely, turning 5s to 1s, and so forth. Wellit works in all the rows
except for Row 2, where there is some missing data and the formula would
return an undesirable value of 6. To protect against this, we need to use a
slightly more complex formula, as follows: =IF(ISNUMBER(J2),6 J2,NA())
This formula uses the IF() function, which tests a condition (ISNUMBER(J2)-
is the value in cell J2 a number?), and returns the reverse-coded value (6 J2)
if the condition is true, or an N/A error if it is not. When imported into SPSS,
the N/A error is interpreted as a missing value. Similar use of the IF() func-
tion could help ensure that the area code is only extracted from phone num-
bers that consist of 10 digits, as in the parsing example above.
Compute new values. Most readers should be familiar with functions
like SUM() or AVERAGE(), which return the sum and average of a range of
cells, respectively. There are many other functions that can be leveraged to

94 January 2005 Volume 42 Number 3

populate new variables, from the simple MIN() and MAX(), which return the
minimum and maximum values within a range of cells, to the somewhat more
complex PERCENTRANK(), which returns the percentage rank of a value
within a larger range of cells. It would simply take too long to visit all of the
functions, and so we suggest again that you take some time to explore them
using the Excel function wizardaccessible by selecting Insert |
Functionand/or by locating a good reference on Excel functions. We list
several at the end of this document.
Reformat data. One way in which Excel can ease annoyance is by helping
you impose a consistent format on your data. Consider text case, for example.
SPSS is case sensitive and will therefore understand variations of the abbrevia-
tion for PennsylvaniaPA, Pa, and paas three different values. Excels
UPPER() function takes care of this handily by converting values to all upper
case. There is also a LOWER() function, which works as you might expect, and
a PROPER() function that capitalizes each word. A particularly useful text func-
tion is TRIM(), which removes all spaces except single spaces between words
note how it would be useful for the Street Address column in our sample file.

Step 4. Create an Analysis-Ready Copy of the Data

Now that weve done the heavy work, it remains for us merely to copy
our final dataset from the Interim Data worksheet to the Final Data work-
sheet. There are several reasons we dont simply attempt to copy the data
straight from the Interim Data worksheet into a statistics package. First, and
most important, weve written a lot of formulae, yet the output of formulae is
often not readable by statistics packages when they try to import data. In
plain English, if you try to import data produced by formulae, you will more
likely than not end up with blank entries. A second reason for creating a copy
of the data is that the processing step typically produces a number of addi-
tional columns of data that we might not want to preserve in our analysis
dataset. For example, parsing out city, state, and ZIP code information in our
example above produced several redundant columns. It is better to avoid
confusion by leaving out these apparently redundant variables and focusing
only on those that belong in the final copy of the data.
Copying the data to the Final Data worksheet is a straightforward task.
First, make sure that the rows of data in the Interim Data worksheet are sort-
ed in the order you want them (if there is such an order). If you need to re-
sort them, see our instructions above. Next, select the columns of data that
you wish to copy. Activate the Final Data worksheet and select the first cell
in the column where you would like to paste the data. Click on Edit | Paste
Special, select the Values radio button, and click OK. Excel will paste
only the final values of the copied cells. This means that there is no link
between the copied and pasted cellsif you change the original cells on the
Interim Data worksheet, nothing will change on the Final Data worksheet.

The Industrial-Organizational Psychologist 95

Keep following this cut-and-paste process until you have completed the Final
Data worksheet to your satisfaction.

Step 5. Document the Data

There are several ways to document your data. Some are implicit. For-
mulae, especially simple formulae, make it fairly clear how their results were
derived. More complex formulae often require further explanation. Follow-
ing are our recommendations for easy ways to document your dataset. Quite
honestly, Excel makes it so easy to do so that there is no reason to have
undocumented data.
File-level documentation. For general information, consider using the
file properties page, accessible via File | Properties. The Summary tab
offers a number of useful fields for capturing information, including a large
field for general comments. The Custom tab includes a number of specific
fields, such as Project, Date Completed, and Checked by. Importantly, this
information always travels with the file, so there is no risk associated with
multiple pieces of documentation getting separated.
Cell comments. You can add notes to cells by selecting Insert | Com-
ment or by showing the Reviewing toolbar. Cell comments are separate
from the data within the cells and have no influence on any computations.
Further, they can be shown or hidden per your preference. We recommend
you add comments to the variable name cells (usually the first row of a
worksheet) to document the computation or formatting actions taken. You
could also use cell comments to flag redundant rows of data omitted from the
final dataset, or to annotate the source of the data copied to each column of
the Final Data worksheet. Another handy feature is the ability to print out
your comments with the rest of the dataset. To configure your file to print
comments, click on File | Page Setup, activate the Sheet tab, and make your
selection from the Comments drop-down box.
Cell shading. One easy and intuitive way to document your data is to
color code it according to a coding scheme. For example, you could indicate
columns on the Interim Data worksheet that were copied to the Final Data
worksheet by coloring them green. Columns of data that were superseded by
others could be shaded gray, such as the City, State, ZIP column that was
parsed into its basic elements. Along with cell comments and file-level doc-
umentation, cell shading makes it easy to have a dataset that anyone can
review at any time and quickly understand.

References

Weiss, R. J. (2004a, July). Leading Edge: Programming Excel macros. TIP: The Industri-
al-Organizational Psychologist, 42, 127134.
Weiss, R. J. (2004b, April). Leading Edge: Using Excel forms. TIP: The Industrial-Orga-
nizational Psychologist, 41, 6169.

96 January 2005 Volume 42 Number 3

 Additional Resources
The data file we used as our example in this article is available at
http://www.jasonweiss.net/html/excel_tips_and_tools.html and should offer
a good start to those who are interested in our approach to cleaning and
preparing data.
Space precluded us from offering more information on the power of Excel
functions, but we do have several books to recommend on the subject:
Rubin, J., & Jelen, B. (2003). Mr. Excel on Excel: Excel 97, 2000, 2002.
Uniontown, OH: Holy Macro! Books.
Walkenbach, J. (2001). Excel 2002 formulas. New York: M&T Books.

Questions, Comments, Suggestions?

If you have questions or comments about this article or suggestions for
future editions of this column, please dont hesitate to e-mail
[email protected]. We regret, of course, that we cant offer techni-
cal help on Excel or other applications. However, there are many free online
resources where other users are eager to assist you, and they often answer
questions surprisingly quickly. Check out one popular site at
http://www.mrexcel.com/board2/. Happy computing!

Don't miss the Demo

ooths
B in the Exhibit
all! H

Along with all the othe

wonderfulxhibits,
e this
year as many our
as f
SIOP sponsors will
provide multimedia
presen
tations in demo
booths,which will be
equipped for video or
PowerPoin
t exhibitions
.

The Industrial-Organizational Psychologist 97