Scribd
Upload
339 views1 page

03 DM BLDG U-Value+Calculation V01

The document contains calculations of the thermal transmittance (U-value) of various building elements for a proposed flour mill, including an external wall, drop beam, column, roof, insulated ground, non-insulated ground, partition, and typical floor. The external wall is made of multiple layers and has a calculated U-value of 0.30 W/m2K, meeting the maximum requirement of 0.57 W/m2K. However, U-values are not provided for the other elements.

Uploaded by

Aburvaraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
339 views1 page

03 DM BLDG U-Value+Calculation V01

The document contains calculations of the thermal transmittance (U-value) of various building elements for a proposed flour mill, including an external wall, drop beam, column, roof, insulated ground, non-insulated ground, partition, and typical floor. The external wall is made of multiple layers and has a calculated U-value of 0.30 W/m2K, meeting the maximum requirement of 0.57 W/m2K. However, U-values are not provided for the other elements.

Uploaded by

Aburvaraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Thermal Transmittance (U-Value) 19-2-2012 v1

Plot No. S51106

Project Proposed Flour Mill, Store, Silos, Office and Ancillary Buildings

Consultant Al Jassim Engineering Consultants

Suppliers Materials Hide Empty Rows

Thickness Density Resistance Mass


Layer No. External Wall
mm Max. U = 0.57 W/m2K kg/m3 m2K/W kg/m2
1.000 0.00 Inside Surface Film Resistance for Walls 0.000 0.120 0.000
11.030 12.70 12.7mm Gypsum or plaster Board 640.000 0.079 81.280
17.000 50.00 Rock Wool FUJ Slabs without facing Approved System Required 40.000 1.282 20.000
120.010 250.00 250mm Concrete Block With Polystyrene Insert Without Additional EPS Piece ( Light Mortar) Registered Manufacture Only 1350.000 1.761 3375.000
12.000 20.00 Plaster (Cement / Sand) 1860.000 0.028 372.000
2.000 0.00 Outside Surface Film Resistance for Walls 0.000 0.044 0.000

332.7 Thermal Transmittance U-Value: 0.30 W/m2K As/DM Reg. 3.314

mm 0.05 Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. External Drop Beam
mm Max. U = 0.57 W/m2K kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. External Column
mm Max. U = 0.57 W/m2K kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. Roof
mm Max. U = 0.30 W/m2K kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. Insulated Ground (Horizontal/Vertical)
mm Max. U = 0.57 W/m2K kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. Non-Insulated Ground
mm kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. Partition
mm kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

Thickness Density Resistance Mass


Layer No. Typical Floor
cm kg/m3 m2K/W kg/m2

0 Thermal Transmittance U-Value: #DIV/0! W/m2K 0.000

mm #DIV/0! Btu / oF ft2 h m2K/W

You might also like