Classification of Petrochemicals
Classification of Petrochemicals
Classification of Petrochemicals
The nature of petrochemical industry is very complex. The journey from petroleum to
useful end products is long and there are many steps in the process.
Feed Stock
The starting material used for the production of petrochemicals is called feed stock. There are
two common feed stocks for the manufacture of petrochemicals; these are :
1. Natural gas
2. Naphtha and reformed naphtha
Natural gas occurs in nature in association with petroleum. The major hydrocarbon
component of natural gas is methane. Naphtha is a fraction obtained during refining of
petroleum.
Some countries or industries prefer to use natural gas while some other use naphtha as a
starting material (feed stock) for the production of petrochemicals. The choice for the use of
natural gas or naphtha as feed stock by a particular country or industry depends upon the
availability of a particular feed stock or the availability of technology for the manufacture of
petrochemicals.
Primary Petrochemicals
Primary petrochemicals are the molecules obtained from the feed stock and are used to
manufacture petrochemical intermediates. Since the feedstock consists of natural gas, naphtha
and reformed naphtha, these give different primary petrochemicals.
The petrochemicals obtained from a given feedstock by a series of reactions are called
down stream petrochemicals. Down stream means that a particular petrochemical comes at a
later stage in the sequence of chemicals produced. For example in the following reaction.
Methyl alcohol is referred to as a down stream petrochemical.
Methane is the major hydrocarbon component of natural gas. CNG is the compressed
natural gas and LNG is the liquified natural gas. Moreover, methane is also obtained in large
quantities as a by product of petroleum refining.
1. Chlorinated products
2. Unsaturated hydrocarbons
3. Carbon black
4. Hydrogen
5. Methyl alcohol
Unsaturated hydrocarbons
Methane is cracked (by pyrolysis) with the help of suitable catalysts to get ethylene,
propylene and acetylene. These are used to get other products, which will be discussed later.
Carbon black
Methane is converted into carbon black (a form of carbon) by pyrolysis (cracking) and
Chemistry and Industry hydrogen is obtained as a by product. Carbon black is used as a black
pigment in manufacture of black printing ink and in rubber tyre industry.
Hydrogen
1. Ethyl alcohol
2. Ethylene oxide
3. Ethylene glycol
4. Dichloroethane
5. Vinyl chloride
6. Polyethylene
7. Ethyl benzene
Ethyl Alcohol
Ethylene Oxide
Ethylene is oxidized to ethylene oxide with air or oxygen in the presence of a catalyst. It
is a raw material for the manufacture of ethylene glycol, which is a starting material for the
manufacture of polyester.
Ethylene Glycol
Vinyl Chloride
Vinyl chloride is made directly from ethylene or is made from ethylene dichloride.
Polyethylene
Ethyl Benzene
Ethylene reacts with benzene in the presence of a suitable catalyst to give ethyl
benzene. Ethyl benzene is converted to styrene. Styrene is a raw material for the manufacture
of important plastic material polystyrene.
1. Iso-propyl alcohol
2. Polypropylene
3. Cumene (isopropyl benzene)
4. Glycerol
1, 3-Butadiene is obtained from naphtha by cracking. It is a diene, that is, it has two
carbon-carbon double bonds. It is a monomer for polybutadine which is used as a substitute for
natural rubber. Butadiene and styrene on polymerization give a copolymer called BUNA-S.