Scribd
Upload
217 views6 pages

B&C - 2015

This document describes specifications for several controllers - a pH/ORP controller, a free chlorine controller, a dissolved oxygen controller, and a turbidity controller. The controllers measure and control pH, ORP, chlorine, oxygen, and turbidity levels. They have LED displays, sensors as inputs, setpoints for control, alarms, analog outputs, and power supply options. They are enclosed in environmentally protected boxes and are designed for wall mounting.

Uploaded by

Tư vấn môi trường
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views6 pages

B&C - 2015

This document describes specifications for several controllers - a pH/ORP controller, a free chlorine controller, a dissolved oxygen controller, and a turbidity controller. The controllers measure and control pH, ORP, chlorine, oxygen, and turbidity levels. They have LED displays, sensors as inputs, setpoints for control, alarms, analog outputs, and power supply options. They are enclosed in environmentally protected boxes and are designed for wall mounting.

Uploaded by

Tư vấn môi trường
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

PH/ORP CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
pH : Sensor code: SZ 173 with cable length 9M
ORP : Sensor code: SZ 2035 with cable length 9M

CONTROLLER Range:
pH : 0-14 pH
ORP : (-1000 +1000) mV.
(0 -1000) mV.
(0 +1000) mV.

Resolution:
pH : 0.01 pH
ORP : 1mV

Temperature reference:
0 100C or 32 212F
pH/ORP 7635
Temperature compensation:
Manual or Automatic
Made in ITALY
Setpoint 1 and 2:
On/Off Function
Min/Max Function
Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load
Options
Alarm:
Holders: Active/non-active function
Submersible holder - Pic. 1 Min/Max function
Flow cells holder - Pic. 2 Delay 0 99.9 sec
Auto-clean holder - Pic 3 Relay contact SPDT, 220 V, 5 A resistive load

Enviroment protected box: Analog output:


Single or double - IP 65 Box - Pic. 4 0 20 mA or 4 20 mA
Isolation 250 V
Power supply: Max load 600 Ohm
9 36 Vdc or 24 Vac
Power supply:
85 264 Vac, 50/60 Hz

Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation
Pic. 2 Pic. 3
Dimensions:
96x96x96 mm

Weight:
Approx. 500g

Pic. 1 Pic. 4 Mounting:


On Panel (with square hole 90x90 mm)
FREE CHLORINE CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Potentiostatic sensor, code: SZ 283
with cable length 3M and holder code SZ 7261

CONTROLLER Range:
(0 2,000), (0 20,00) mg/L

Resolution:
0,001, 0,01 mg/L

Temperature reference:
20 25C

Temperature compensation:
Manual or Automatic

CL 7635 Setpoint 1 and 2:


On/Off Function
Min/Max Function
Made in ITALY Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Min/Max function
Options Delay 0 99.9 sec
Relay contact SPDT, 220 V, 5 A resistive load
Holders:
Flow cells holder - Pic. 1 Analog output:
Auto-clean holder - Pic 2 0 20 mA or 4 20 mA
Isolation 250 V
Enviroment protected box: Max load 600 Ohm
Single or double - IP 65 Box - Pic. 3
Power supply:
Power supply: 85 264 Vac, 50/60 Hz
9 36 Vdc or 24 Vac
Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm
Pic. 1 Pic. 2
Weight:
Approx. 500g

Mounting:
On Panel (with square hole 90x90 mm)

Pic. 3
DISSOLVED OXYGEN CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Polarographic sensor, code: SZ 654.1
with cable length 5M and Pt100 build-in

CONTROLLER Range:
(0 20,00) mg/L

Resolution:
0,01 mg/L

Temperature reference:
20 25C

Temperature compensation:
Manual or Automatic

OD 7635 Setpoint 1 and 2:


On/Off Function
Min/Max Function
Made in ITALY Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Min/Max function
Options Delay 0 99.9 sec
Relay contact SPDT, 220 V, 5 A resistive load
Holders:
Submersible holder - Pic. 1 Analog output:
Flow cells holder - Pic. 2 0 20 mA or 4 20 mA
Auto-clean holder - Pic 3 Isolation 250 V
Max load 600 Ohm
Enviroment protected box:
Single or double - IP 65 Box - Pic. 4 Power supply:
85 264 Vac, 50/60 Hz
Power supply:
9 36 Vdc or 24 Vac Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm
Pic. 2 Pic. 3
Weight:
Approx. 500g

Mounting:
On Panel (with square hole 90x90 mm)

Pic. 1 Pic. 4
TURBIDITY CONTROLLER

Specification
Dipplay:
LCD, 1 line, 16 characters

Input:
TU sensor, code: SZ 810
Flow holder, code: SZ 910
Sensor cable, code: SZ 9481 (length 9M)
CONTROLLER
Range:
(0 4.000), (0 40.00), (0 400.0) NTU

Resolution:
0.05% of Range

Temperature reference:
20 25C

Temperature compensation:
Manual or Automatic
TU 7685
Setpoint 1 and 2:
On/Off Function
Made in ITALY Min/Max Function
Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Options Min/Max function
Delay 0 99.9 sec
Sensor: Relay contact SPDT, 220 V, 5 A resistive load
Submersible and auto-clean sensor Pic. 1
Analog output:
Enviroment protected box: 0 20 mA or 4 20 mA
Single or double - IP 65 Box - Pic. 2 Isolation 250 V
Max load 600 Ohm
Power supply:
9 36 Vdc or 24 Vac Power supply:
85 264 Vac, 50/60 Hz

Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm
Pic. 2
Weight:
Approx. 500g
Pic. 1 Mounting:
On Panel (with square hole 90x90 mm)
CONDUCTIVITY CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Sensor code: SZ 2373.1
(Selectable K=0.1cm or K=1cm or K=10cm)
with cable length 1.5M and Pt100 built-in
CONTROLLER

Range:
(0 20), (0 200), (0 2000) mS
(Depend on sensor)

Resolution:
0.01 mS, 0.1 mS, 1 mS depend on range

Temperature reference:
0 100C or 32 212F

Temperature compensation:
C 7635 Manual or Automatic

Made in ITALY Setpoint 1 and 2:


On/Off Function
Min/Max Function
Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Options Active/non-active function
Min/Max function
Holders: Delay 0 99.9 sec
Submersible holder - Pic. 1 Relay contact SPDT, 220 V, 5 A resistive load
Flow cells holder - Pic. 2
Analog output:
On-line sensor: 0 20 mA or 4 20 mA
On-line sensor code: SI 301 - Pic 3 Isolation 250 V
Max load 600 Ohm
Enviroment protected box:
Single or double - IP 65 Box - Pic. 4 Power supply:
85 264 Vac, 50/60 Hz
Power supply:
9 36 Vdc or 24 Vac Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
Pic. 2 Pic. 3 96x96x96 mm

Weight:
Approx. 500g

Mounting:
On Panel (with square hole 90x90 mm)
Pic. 1 Pic. 4
TEMPERATURE CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Pt 100 (3 wire) code SI 540
(Immersion Sensor length 500 mm)

CONTROLLER Range:
0 199.9 C

Resolution:
0.1 C

Temperature reference:
0 100C or 32 212F

Temperature compensation:
Manual or Automatic

TR 7615 Setpoint 1 and 2:


On/Off Function
Min/Max Function
Made in ITALY Delay 0 99,9 sec
Relay contact SPDT, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Min/Max function
Options Delay 0 99.9 sec
Relay contact SPDT, 220 V, 5 A resistive load
Holders:
On-line sensor - Pic. 1 Analog output:
0 20 mA or 4 20 mA
Enviroment protected box: Isolation 250 V
Single or double - IP 65 Box - Pic. 2 Max load 600 Ohm

Power supply: Power supply:


9 36 Vdc or 24 Vac 85 264 Vac, 50/60 Hz

Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm

Weight:
Approx. 500g
Pic. 1 Pic. 2
Mounting:
On Panel (with square hole 90x90 mm)

You might also like