1 2 3 4

D The plug terminal numbering is based on looking at the plug face where it mates with the ECU. D
It starts at the top left corner, top is defined as the plug locking tab.

1 2 3 4 5 6 7 8 9 10 11 1213
1415 161718 1920 21 2223 24 2526 PA
14 1
12 volt ignition power input Black/Red 15 IGN Batt + 2 Blue/Yellow Unswitched 12 volt ECU power feed
Port Yellow SSC SP1 Violet/White To ECO on ECU
16 SP 3 Black/Orange Speed output to cruise control
17 4
OD Direct Clutch Speed Sensor Blue 18 NCO- NCO+ 5 Pink OD Direct Clutch Speed Sensor
Ground on chassis White/Black E1 IDL Yellow/Blue Throttle Sensor 1 and IDL1 on ECU
1 2 3 4 5 6 7 8 To NEO on ECU Brown/White 19 NE DG 6 Lgreen/Black Check connector TT
20 7
9 1011 121314 1516 Overdrive main switch Black/Red 21 OD2 ESA3 8 Yellow/Green To ESA3 on ECU
To ECT1 on ECU Pink/Green ECT1 ESA2 Yellow/Red To ESA2 on ECU
To F/C on ECU Blue/White 22 F/C ESA1 9 Yellow To ESA1 on ECU
23 10
To No2 transmission solenoid Pink/Blue 24 S2 S1 11 Pink To No1 transmission solenoid
C To No4 transmission solenoid Red/Yellow SLN- SLU- Red/White To No3 transmission solenoid C
25 12
26 13
E01 White/Black Ground to chassis
ECT26PIN

PB
Neutral gear selected input +12volts Green 9 N R 1 Red/Black Reverse gear selected input +12volts
10 2
First gear selected input +12volts Green/Black 11 L 2 3 Green/Orange 2nd gear selected input +12volts
Economy switch On +12volts Blue/Red E P Blue/White Power switch On +12volts
To cruise control ecu Red/Black 12 A/D BK 4 Green/White Brake on input +12volts
13 5
B Speed sensor2 input Black 14 SS2 SS1 6 Orange Speed sensor1 input B
To L4 on ECU Red/Yellow L4 L3 Red To L3 on ECU
To L2 on ECU Red/Black 15 L2 L1 7 Red/White To L1 on ECU
16 8
To ECT on ECU Violet OD1 ECT2 Pink/Black To ECT2 on ECU
ECT16PIN

Colours are main colour followed by the stripe colour.

eg Black/Red is a black wire with a red stripe

- represents a pink band around the wire

Wire has a PVC sheath which is thinner than normal sheath.
Therefore wire is 16 guage and is larger than the normal 20 guage it would appear.

- represents a silver band around the wire

This means wire normally has a shield around which is grounded.

A Title A
Crown ECT pinouts

Size Number Revision

1 1
A4
Date: 2-Mar-2004 Sheet of 2 of 2
File: C:\Crown\CROWNECU.DDB Drawn By: Russell Koehne
1 2 3 4