Scribd
Upload
203 views

Lecture 1

This document provides an introduction to feedback control systems for mechanical engineers. It defines a system or process as something under consideration. Control involves forcing a system to behave in a desired way to achieve objectives. Examples of control include automobile steering, industrial processes, robotics, and human physiology. The document outlines open-loop and closed-loop control systems, providing examples of each. Closed-loop systems incorporate feedback of the actual output to compare to the desired output. Designing an effective feedback control system involves modeling the system, analyzing its properties, and designing a controller based on performance specifications.

Uploaded by

faridrahman
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
203 views

Lecture 1

This document provides an introduction to feedback control systems for mechanical engineers. It defines a system or process as something under consideration. Control involves forcing a system to behave in a desired way to achieve objectives. Examples of control include automobile steering, industrial processes, robotics, and human physiology. The document outlines open-loop and closed-loop control systems, providing examples of each. Closed-loop systems incorporate feedback of the actual output to compare to the desired output. Designing an effective feedback control system involves modeling the system, analyzing its properties, and designing a controller based on performance specifications.

Uploaded by

faridrahman
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

EE 469: Feedback control Systems for Mechanical Engineers

Lecture notes set 1

Ilia G. Polushin

January 7, 2003

Introduction

A system or a process or a plant is a segment of environment that is under consideration


(working definition).

Control is a term that describes the process of forcing a system to behave in a desired
way in order to achieve certain objective(s)/goal(s).

Examples.

• Automobile steering control.

• Thousands of industries consider control in some or the other form such as quality
control, production control, temperature control, pollution control, precision control,
etc.

• Robot control.

• Human body implements highly sophisticated control schemes for numerous purposes
such as body temperature regulation, hormone level control, etc.

Control Engineering is not restricted to one field of engineering but equally ap-
plicable to different branches of engineering such as aeronautical, mechanical,
chemical, civil, computer, electrical etc.

1
Control systems

Typically, a system (process) has one or more inputs and one or more outputs, which
can be represented by a block, as shown in figure 1.

Figure 1: Typical representation of a process

Control System is an interconnection of components forming a system configuration


that will provide a desired system response.

Open-loop and closed-loop control systems

Depending on configuration, control systems can be categorized into mainly two classes:

i) open-loop control systems;

ii) closed-loop (or feedback) control systems.

Open-loop control systems

An open-loop control systems utilizes a controller or actuating device to obtain a


desired response directly without using feedback.

Figure 2: Open-loop control system

2
Example of an open loop control system: room temperature control. The
structure of this system is presented in figure 3. In this system the inlet vent temperature is
the input (control signal), and the output (controlled variable) is the room air temperature.
The actuator comprises of the furnace and a pre-programmed on-off switch that triggers
the furnace, which in turn activates the inlet vent temperature. The ambient temperature
acts as a disturbance.

Figure 3: Example of an open loop control system: room temperature control

The open-loop control system cannot adjust to changes of the ambient tem-
perature.

Example of an open loop control system: controlling the position of a missile


launcher from a remote location [1]. This system is illustrated in figure 4. The input
is the desired angular position of the missile launcher, and the control system consists of
potentiometer, power amplifier, motor, gearing between the motor and missile launcher,
and the missile launcher. For accurate positioning, the missile launcher should be precisely
calibrated with reference to the angular position of the potentiometer, and the character-
istics of the potentiometer, amplifier and motor should remain constant. Except for the
potentiometer, the component that comprise this open loop control system are not pre-
cision devices. Their characteristics can easily change and result in false calibration and
poor accuracies. In practice, simple open-loop control systems are never used for the accu-
rate positioning of fire-control systems because of the inherent possibility of inaccuracies
and the risks involved.

3
Figure 4: Example of an open loop control system: controlling the position of a missile
launcher from a remote location

Closed-loop (feedback) control systems

The structure of a simple closed-loop feedback system is shown in figure 5. In contrast to


an open-loop control system, a closed-loop utilizes the additional measure of the actual
output to compare the actual output with the desired output (reference or command).
This additional measure of the output is called the feedback.

Figure 5: Closed-loop control system

Example of a closed-loop control system: room temperature control. The previ-


ous example is now modified by incorporating the measure of the output, i.e. the room air
temperature. The controller is the thermostat that takes into account a reference signal
and the output feedback in order to set the switch position. Ideally, the thermostat should
trigger the switch as soon as the error is negative and switch off when the room air has
reached/exceeded the reference temperature. The features of this scheme are:

4
Figure 6: Example of a closed-loop control system: room temperature control

• If room temperature < reference temperature, the furnace is switched on automati-


cally, until room temperature ≥ reference temperature.

• Can handle changes in the system (e.g. change in ambient temperature).

• It is negative feedback (the measured output is subtracted from the reference signal).

Example of a closed-loop control system: controlling the position of a


missile launcher from a remote location [1]

The previous example is modified by introducing a position feedback loop. This feedback
loop consists of potentiometer R2 and the difference amplifier. Should an error exists, it
is amplified and applied to a motor drive which adjusts the output-shaft position until it
agrees with the input-shaft position, and the error is zero.

Figure 7: Example of a closed-loop control system: controlling the position of a missile


launcher from a remote location

5
Feedback control systems used to control position, velocity, and acceleration are very
common in industrial applications. They have been given the special name of servomech-
anisms.

The important feature of the using of feedback is that the feedback control
system can handle changes in the system. On the other hand, improper use
of feedback can make the system unstable, so the stability issue arises.

Example of a closed-loop control system: Automatic depth control of a


submarine [1]

Figure 8: Automatic depth control of a submarine

Suppose the captain of the submarine wants the submarine to ”hover” at a desired depth,
and sets the desired depth as a voltage from calibrated potentiometer. The actual depth is
measured by a pressure transducer which produces a voltage proportional to depth. The
difference between the desired and the actual depth is amplified which then drives a motor

6
that rotates the stern plane actuator angle θ in order that the stern plane rotation reduces
the depth error of the submarine to zero.

Given a process, how to design a feedback control system?

Three steps:

• Modelling. Obtain mathematical description of the systems.

• Analysis. Analyze the properties of the system.

• Design. Given a plant, design a controller based on performance specifications.

The course spans each of these steps in that sequence.

References

[1] S. M. Shinners, Modern Control System Theory and Design. New York: Wiley, 2nd ed.,
1998.

You might also like