2G-5G Networks: Evolution of

Technologies, Standards, and Deployment

Submitted BY:
Ambrish Kumar Mishra
E.T (3rd Yr. )
0901ET151058
ABSTRACT
This article presents an overview of the evolution of technologies, standards, and
deployment from second to fifth generation mobile networks with emphasis on
current and future trends in the areas of wireless networking, multimedia
technology, network architecture, and network services. Related research in the
development of future mobile systems has been highlighted. Issues of system
integration, global roaming capabilities, handoff, high speed multimedia support,
ad-hoc networking, quality of service, and physical layer problems has been
addressed. In addition, global developments in multimedia network services and
terminals have been discussed.

INTRODUCTION

The fourth and fifth generation wireless mobile systems, commonly known as 4G
and 5G, are expected to provide global roaming across different types of wireless
and mobile networks, for instance from satellite to mobile networks and to
Wireless Local Area Networks (WLANs). 4G is an all IP-based mobile network
using different radio access technologies providing seamless roaming and
providing connection via always the best available network [1]. The vision of 4G
wireless/mobile systems is the provision of broadband access, seamless global
roaming, and Internet/data/voice everywhere, utilizing for each the most
"appropriate" always best connected technology [2]. These systems are about
integrating terminals, networks, and applications to satisfy increasing user
demands ([3], [4]). 4G systems are expected to offer a speed of over 100 Mbps in
stationary mode and an average of 20 Mbps for mobile stations reducing the
download time of graphics and multimedia components by more than ten times
compared to currently available 2 Mbps on 3G systems.
The fifth generation communication system is envisioned as the real wireless
network, capable of supporting wireless world wide web (www) applications in
2010 to 2015 time frame. There are two views of 5G systems: evolutionary and
revolutionary. In evolutionary view the 5G (or beyond 4G) systems will be
capable of supporting wwww allowing a highly flexible network such as a
Dynamic Adhoc Wireless Network (DAWN). In this view advanced technologies
including intelligent antenna and flexible modulation are keys to optimize the
adhoc wireless networks. In revolutionary view, 5G systems should be an
intelligent technology capable of interconnecting the entire world without limits.
An example application could be a robot with built-in wireless communication
with artificial intelligence. The 4G system is still a predominantly research and
development initiative based upon 3G, which is struggling to meet its
performance goals. The challenges for development of 4G systems depend upon
the evolution of different underlying technologies, standards and deployment. We
present an overall vision of the 4G features, framework, and integration of mobile
communication. First we explain the evolutionary process from 2G to 5G in light
of used technologies and business demands. Next, we discuss the architectural
developments for 2G-5G systems, followed by the discussion on standards and
services. Finally, we address the market demands and discuss the development of
terminals for these systems.

2G-5GNETWORKS: EVOLUTION

The first generation of mobile phones was analog systems that emerged in the
early 1980s [5]. The second generation of digital mobile phones appeared in
1990s along with the first digital mobile networks. During the second generation,
the mobile telecommunications industry experienced exponential growth in terms
of both subscribers and value-added services. Second generation networks allow
limited data support in the range of 9.6 kbps to 19.2 kbps. Traditional phone
networks are used mainly for voice transmission, and are essentially circuit-
switched networks.
2.5G networks, such as General Packet Radio Service (GPRS), are an extension
of 2G networks, in that they use circuit switching for voice and packet switching
for data transmission resulting in its popularity since packet switching utilizes
bandwidth much more efficiently. In this system, each users packets compete for
available bandwidth, and users are billed only for the amount of data transmitted.
3G networks were proposed to eliminate many problems faced by 2G and 2.5G
networks, especially the low speeds and incompatible technologies such as Time
Division Multiple Access (TDMA) [5] and Code Division Multiple Access
(CDMA) [6] in different countries. Expectations for 3G included increased
bandwidth; 128 Kbps for mobile stations, and 2 Mbps for fixed applications [7].
In theory, 3G should work over North American as well as European and Asian
wireless air interfaces. In reality, the outlook for 3G is not very certain. Part of
the problem is that network providers in Europe and North America currently
maintain separate standards bodies (3GPP for Europe and Asia; 3GPP2 for North
America). The standards bodies have not resolved the differences in air interface
technologies. There is also a concern that in many countries 3G will never be
deployed due to its cost and poor performance. Although it is possible that some
of the weaknesses at physical layer will still exist in 4G systems, an integration
of services at the upper layer is expected.

The evolution of mobile networks is strongly influenced by business challenges

and the direction mobile system industry takes. It also relates to the radio access
spectrum and the control restrictions over it that varies from country to country.
However, as major technical advances are being standardized it becomes more
complex for industry alone to choose a suitable evolutionary path. Many mobile
system standards for Wide Area Networks (WANs) already exists including the
popular ones such as Universal Mobile Telecommunications Systems (UMTS),
CDMA, and CDMA-2000 (1X/3X). In addition there are evolving standards for
Personal Area Networks (PANs), such as Bluetooth wireless, and for WLANs,
such as IEEE 802.11.

The current trend in mobile systems is to support the high bit rate data services at
the downlink via High Speed Downlink Packet Access (HSDPA). It provides a
smooth evolutionary path for UMTS networks to higher data rates in the same
way as Enhanced Data rates for Global Evolution (EDGE) do in Global Systems
for Mobile communication (GSM). HSPDA uses shared channels that allow
different users to access the channel resources in packet domain. It provides an
efficient means to share spectrum that provides support for high data rate packet
transport on the downlink, which is well adapted to urban environment and indoor
applications. Initially, the peak data rates of 10 Mbps may be achieved using
HSPDA. The next target is to reach 30 Mbps with the help of antenna array
processing technologies followed by the enhancements in air interface design to
allow even higher data rates. Another recent development is a new framework for
mobile networks that is expected to provide multimedia support ([8], [9]) for IP
telecommunication services, called as IP Multimedia Subsystems (IMS) [10].
Real-time rich multimedia communication mixing
telecommunication and data services could happen due to IMS in wireline
broadband networks. However, mobile carriers cannot offer their customers the
freedom to mix multimedia components (text, pictures, audio, voice, video)
within one call. Today a two party voice call cannot be extended to a multi-party
audio and video conference. IMS overcomes such limitations and makes these
scenarios possible.
The future of mobile systems is largely dependent upon the development and
evolution of 4G systems, multimedia networking, and upto some extent, photonic
networks. It is expected that initially the 4G mobile systems will be used
independent from other technologies. With gradual growth of high speed data
support to multimegabits per second, an integrations of services will happen. In
addition, developments in photonic switching might allow mobile
communication on a completely photonic network using Wavelength Division
Multiplexing (WDM) on photonic switches and routers. The evolutionary view
of 4G systems to 5G include a support of wireless world wide web allowing a
highly flexible and reconfigurable dynamic adhoc networks.
Network Architecture

The basic architecture of wireless mobile system consists of a mobile phone

connected to the wired world via a single hop wireless connection to a Base
Station (BS), which is responsible for carrying the calls within its region called
cell (Figure 1). Due to limited coverage provided by a BS, the mobile hosts
change their connecting base stations as they move from one cell to another. A
hand-off (later referred to as horizontal handoff in this article) occurs when a
mobile system changes its BS. The mobile station communicates via the BS using
one of the wireless frequency sharing technologies such as FDMA, TDMA,
CDMA etc. Each BS is connected to a Mobile Switching Center (MSC) through
fixed links, and each MSC is connected to others via Public Switched Telephone
Network (PSTN). The MSC is a local switching exchange that handles switching
of mobile user from one BS to another. It also locates the current cell location of
a mobile user via a Home Location Register (HLR) that stores current location of
each mobile that belongs to the MSC. In addition, the MSC contains a Visitor
Locations Register (VLR) with information of visiting mobiles from other cells.
The MSC is responsible for determining the current location of a target mobile
using HLR, VLR and by communicating with other MSCs. The source MSC
initiates a call setup message to MSC covering target area for this purpose.The
first generation cellular implementation consisted of analog systems in 450-900
MHz frequency range using frequency shift keying for signaling and Frequency
Division Multiple Access (FDMA) for spectrum sharing. The second generation
implementations consist of TDMA/CDMA implementations with 900, 1800
MHz frequencies. These systems are called GSM for Europe and IS-136 for US.
The respective 2.5G implementations are called GPRS and CDPD followed by
3G implementations.
Third generation mobile systems are intended to provide a global mobility with
wide range of services including voice calls, paging, messaging, Internet and
broadband data. IMT-2000 defines the standard applicable for North America. In
Europe, the equivalent UMTS standardization is in progress. In 1998, a Third
Generation Partnership Project (3GPP) was formed to unify and continue the
technical specification work. Later, the Third Generation Partnership Project 2
(3GPP2) was formed for technical development of CDMA-2000 technology.
3G mobile offers access to broadband multimedia services, which is expected to
become all IP based in future 4G systems ([11], [12]). However, current 3G
networks are not based on IP; rather they are an evolution from existing 2G
networks. Work is going on to provide 3G support and Quality of Service (QoS)
in IP and mobility protocols. The situation gets more complex when we consider
the WLAN research and when we expect it to become mobile. It is expected that
WLANs will be installed in trains, trucks, and buildings. In addition, it may just
be formed on an ad-hoc basis (like ad-hoc networks [13-[15]) between random
collections of devices that happen to come within radio range of one another
(Figure 2).

In general, 4G architecture includes three basic areas of connectivity ([16]-[19]);

PANs (such as Bluetooth), WANs (such as IEEE 802.11), and cellular
connectivity. Under this umbrella, 4G will provide a wide range of mobile
devices that support global roaming ([20]- [23]). Each device will be able to
interact with Internet-based information that will be modified on the fly for the
network being used by the device at that moment (Figure 3).In 5G mobile IP,
each cell phone is expected to have a permanent "home" IP address, along with a
"care-of" address that represents its actual location. When a computer somewhere
on the Internet needs to communicate with the cell phone, it first sends a packet
to the phone's home address. A directory server on the home network forwards
this to the care-of address via a tunnel, as in regular mobile IP. However, the
directory server also sends a message to the computer informing it of the correct
care-of address, so future packets can be sent directly. This should enable TCP
sessions and HTTP downloads to be maintained as users move between different
types of networks. Because of the many addresses and the multiple layers of
subnetting, IPv6 is needed for this type of mobility. For instance, 128 bits (4 times
more than current 32 bit IPv4 address) may be divided into four parts (I thru IV)
for supporting different functions. The first 32-bit part (I) may be defined as the
home address of a device while the second part (II) may be declared as the care-
of address allowing communication between cell phones and personal computers.
So once the communication path between cell and PC is established, care-of
address will be used instead of home address thus using the second part of IPv6
address.

The third part (III) of IPv6 address may be used for tunneling to establish a
connection between wire line and wireless network. In this case an agent (a
directory server) will use the mobile IP address to establish a channel to cell
phones. The fourth and last part (IV) of IPv6 address may be used for local
address for VPN sharing. Figure 4 illustrates the concept.

The goal of 4G and 5G is to replace the current proliferation of core mobile

networks with a single worldwide core network standard, based on IPv6 for
control, video, packet data, and voice. This will provide uniform video, voice,
and data services to the mobile host, based entirely on IPv6. The objective is to
offer seamless multimedia services to users accessing an all IP-based
infrastructure through heterogeneous access technologies. IPv6 is assumed to act
as an adhesive for providing global connectivity and mobility among networks.
Most of the wireless companies are looking forward to IPv6, because they will
be able to introduce new services. The Japanese government is requiring all of
Japan's ISPs to support IPv6 with its first 4G launch. Although the US upgrade to
IPv6 is less advanced, WLANs advancement may provide a shortcut to 4G.
Standards
The role of standards is to facilitate interconnections between different types of
telecommunication networks, provide interoperability over network and terminal
interfaces, and enable free movement and trade of equipment. There are standard
bodies in different countries that develop telecommunications standards based
upon the government regulations, business trends and public demands. In
addition, international standard organizations provide global standardizations. In
telecommunications area, International Telecommunications Union (ITU) and
International Standards Organization (ISO) have been recognized as major
international standards developer. Many popular telecommunications and
networking standards are given by other international organizations such as
Institute of Electrical and Electronics Engineers (IEEE) and Internet Engineering
Taskforce (IETF). Among other organizations, the most well known are
Telecommunications Industry Association (TIA) and American National
Standards Institute (ANSI) in US, European Telecommunication Standards
Institute (ETSI), China Wireless Telecommunications Standards Group (CWTS),
Japans Association of Radio Industries and Businesses(ARIB) and
Telecommunications Technology Committee (TTC), and Koreas
Telecommunication Technology Association (TTA).

The ITU began its studies on global personal communications in 1985, resulting
in a system referred to as International Mobile Telecommunications for the year
2000 (IMT-2000). Later, ITU Radio Communications Sector (ITU-R) and ITU-
Telecommunications (ITU-T) groups were formed for radio communications and
telecommunications standards, respectively. In Europe, the concepts of Universal
Mobile Telecommunications System (UMTS) have been the subject of extensive
research. In 1990, ETSI established an ad hoc group for UMTS that focused on
the critical points to be studied for systems suitable for mobile users Since 1998,
ETSIs standardization of the 3G mobile system has been carried out in the 3G
Partnership Project (3GPP) that focuses on the GSM-UMTS migration path. The
3GPP2 is an effort headed by ANSI for evolved IS-41 networks and related radio
transmission technique.The standard organizations propose the mobile system
standards that change as new technologies emerge, and the regulations and
market demand change. The changing features and used technologies from first
to fifth generation mobile systems are summarized in Table 1. It is noticeable that
the fifth generation system not only provides a horizontal handoff like the
previous systems but also provide a vertical handoff. While a global roaming may
be provided by satellite systems, a regional roaming by 5G cellular systems, a
local area roaming by WLANs, and a personal area roaming by wireless PANs,
it will also be possible to roam vertically between these systems as well as support
wwww services. One technology (or its variation) that is expected to remain in
future mobile system is CDMA, which is a use of spread spectrum technique by
multiple transmitters to send signals simultaneously on the same frequency
without interference to the same receiver. Other widely used multiple access
techniques are TDMA and FDMA mostly associated with 3G and previous
systems. In these three schemes (CDMA, TDMA, FDMA), receivers discriminate
among various signals by the use of different codes, time slots and frequency
channels, respectively. Digital cellular systems is an extension of IS-95 standard
and is the first CDMA-based digital cellular standard pioneered by Qualcomm.
The brand name for IS-95 is cdmaOne. It is now being replaced by IS-2000 and
is also known as CDMA-2000, which is a 3G mobile telecommunications
standard from ITUs IMT-2000. CDMA-2000 is considered an incompatible
competitor of the other major 3G standard WCDMA. Due to its importance in
future systems, lets now examine the different CDMA standards currently
available. CDMA-2000 1x, also known as CDMA-2000 1xMC (Multi-Carrier),
is the core 3G CDMA-2000 technology. The designation Multi-Carrier refers to
the possibility of using up to three separate 1.25 MHz carriers for data
transmission, and is used to distinguish this from WCDMA. WCDMA is the
wideband implementation of the CDMA multiplexing scheme, which is a 3G
mobile communications standard tied with the GSM standard. WCDMA is the
technology behind UMTS. CDMA-2000 1xRTT (Radio Transmission
Technology) is the basic layer of CDMA-2000, which supports up to 144 Kbps
packet data speeds. 1xRTT is considered mostly 2.5G technology, which is used
to describe systems that provide faster services than 2G, but not quite as fast or
advanced as newer 3G systems. CDMA-2000 1xEV (Evolution) is CDMA-2000
1x with High Data Rate (HDR) capability added. 1xEV is commonly separated
into two phases, CDMA-2000 1xEV-DO and CDMA-2000 1xEV-DV.
CDMA2000 1xEV-DO (Evolution-Data Only) supports data rates up to 2.4
Mbps. It is generally deployed separately from voice networks in its own
spectrum. CDMA2000 1xEV-DV (Evolution-Data and Voice), supports circuit
and packet data rates up to 5 Mbps. It fully integrates with 1xRTT voice networks.
CDMA-2000 3x uses three separate 1.25 MHz carriers. This provides three times
the capacity but also requires three times more bandwidth.

Network Services
Users relate to different systems with the help of available applications and
services that are directly a function of available data rates. The key difference
between the 2G and 3G is the data rate support enabling the later to provide
interactive video communication, among other services. A type of service that
gained popularity in 2G systems is the messaging service known as Short
Messaging Services (SMS), which is a text messaging service for 2G and later
mobile phones. The messages in SMS cannot be longer than about 160 characters.
An enhanced version of SMS known as Enhanced Messaging Service (EMS)
supports the ability to send pictures, sounds and animations. A newer type of
messaging service, Multimedia Messaging Service (MMS), is likely to be very
popular for 3G systems and beyond. MMS provides its users the ability to send
and receive messages consisting of multimedia elements from person to person
as well as Internet, and serves as the email client. MMS uses Wireless Application
Protocol (WAP) technology and is powered by the well-known technologies,
EDGE, GPRS and UTMS (using WCDMA). The messages may include any
combination of text, graphics, photographic images, speech and music clips or
video clips The most exciting extension of messaging services in MMS is a video
message capability. For instance, a short 30 seconds video clip may be shot at a
location, edited with appropriate audio being added and transmitted with ease
using the mobile keys on the cellular phones. In addition, by using Synchronized
Multimedia Integration Language (SMIL), small presentations can be made that
incorporate audio and video along with still images, animations and text to
assemble full multimedia presentation by using a media editor. With MMS, a new
type of service Interfacing Multimedia Messaging Services (IMMS) is expected
to emerge that integrates MMS and Mobile Instant Messaging (MIM) allowing
the users to send messages in their MIM buddy list. This will bring full integration
of state-of-the art mobile messaging services including MIM, MMS and chat into
all types of mobile devices.
A new term, Mobile Decision Support (MDS) has been coined recently for a
unique set of services and applications that will provide instant access to
information in support of real-time business and personal activities for vehicle
based 3G systems. Some example services are navigation, emergency services,
remote monitoring, business finder, email, and voicemail. It is expected that MDS
based services will generate a huge non-voice traffic over the net. WAP is an
open international standard for applications that use wireless communication on
mobile phones. The primary language of WAP specification is Wireless Markup
Language (WML), which is the primary content based on XML (A general
purpose markup language to encode text including the details about its structure
and appearance). The original intent in WAP was to provide mobile replacement
of World Wide Web. However, due to performance limitations and costs it did
not become quite popular as originally expected. Although WAP never became
popular, a popular WAP-like service called i-mode has recently been developed
in Japan that allows web browsing and several other well designed services for
the mobile phones. i-mode is based upon Compact HTML (C-HTML) as an
alternate to WML, and is compatible with HTML allowing the C-HTML web
sites to be viewed and edited using standard web browsers and tools.
Terminals
A mobile phone system is used as a basic terminal for communication. Also called
a wireless phone, handset, cellular mobile or cell phone, is a mobile
communications system that uses a combination of radio wave transmission and
conventional telephone switching to permit telephone communication to and
from mobile users within a specified area. A 2.5G/3G terminal may consist of a
mobile phone, a computer/laptop, a television, a pager, a videoconferencing
center, a newspaper, a diary or even a credit card. Often these terminals may
require a compatible 3G card and specialized hardware to provide the desired
functionality.
The terminal design considerations are influenced by the potential applications
and bandwidth requirements. However, there are standards for mobile stations
specifications as well, for instance in IMT-2000. The actual mobile design varies
based mainly upon the multiple available standards, speeds, displays, and
operating systems. There are numerous smart phone operating systems tailored
to specific products by well-known companies such as Palm, Nokia, Sony,
Ericsson, Siemens, Alcatel, Motorola, Samsung, Sanyo, Panasonic, Mitsubishi,
LG, Sharp, Casio, NEC, NTT DoCoMo, KDDI etc. The key capability in most of
the supported products being the camera, video clips, keyboards, touchscreen,
voice recognition, WiFi (IEEE 802.11b WLAN), and bluetooth wireless.

The future trends in wireless terminals include the influences of new technology
such as software radio, wireless socket (WiFi), portability, and new
design/display concepts. The newer smartphones are expected to have the
functionalities of a Pocket PC with features such as Pocket Outlook, Pocket
Internet Explorer, Windows Media Player and MSN Messenger. These newer
services will obviously make the communication in fourth generation systems
much easier. However, the biggest challenge remains the integration and
convergence of the technologies at the lower layers.
CONCLUSION
The current and future trends in mobile systems is considered that includes the
evolutionary path starting from first generation mobile phone systems and is
continuing to the development of 5th generation systems. Evolution in network
design, architecture, standards, services, and terminals are discussed.

REFERENCES
[1] T. Zahariadis, and D. Kazakos, (R)Evolution Toward 4G Mobile
Communication Systems, IEEE Wireless Communications, Volume 10, Issue 4,
August 2003.
[2] E. Gustafsson and A. Jonsson, "Always Best Connected," IEEE Wireless
Communications, pp.49-55, Feb. 2003.
[3] J. Ibrahim, 4G Features, Bechtel Telecommunications Technical Journal,
Volume 1, No. 1, pp. 11-14, Dec. 2002.
[4] W.W. Lu, R. Berezdivin, (Guest Editors) Technologies on Fourth Generation
Mobile Communications, IEEE Wireless Communications, vol. 9, no. 2, pp. 8-
71, Apr. 2002.
[5] D. Falconer, F. Adachi, and B. Gudmundson, Time Division Multiple Access
Methods for Wireless Personal Communications, IEEE Communications
Magazine, Jan. 1995.
[6] R. Kohno, R. Meidan, and L. B. Milstein, Spread Spectrum Access Methods
for Wireless Communications, IEEE Communications Magazine, Jan. 1995.
[7] W.W. Lu, (Guest Editor) Third Generation Wireless Mobile
Communications and Beyond,'' IEEE Personal Communications, vol. 7, no. 6,
pp. 5-47, Dec. 2000.
[8] G. A. Thom, H.323: The Multimedia Communications Standard for Local
Area Networks, IEEE Communications Magazine, 34(12), Dec. 1996, pp. 52-
56.
[9] M. Short and F. Harrison, A Wireless Architecture for a Multimedia World,
The Journal of Communications Network, Volume 1, Part 1, AprilJune 2002.
[10] S. M. Faccin, P. Lalwaney, and B. Patil, IP Multimedia Services: Analysis
of Mobile IP and SIP Interactions in 3G Networks, IEEE Communications
Magazine, Volume 42, Issue 1, pp. 113120, January 2004.
[11] Sun Wireless, All IP Wireless, All the Time Building a 4th Generation
Wireless Network with Open Systems Solutions. Available at:
http://research.sun.com/features/4g_wireless/