0% found this document useful (0 votes)
141 views3 pages

f8913 Zigbee Module Technical Specification - v2.0.0

F8913 ZigBee module is a kind of data terminal device that provides data transfer function by ZigBee network. The product uses high-performance industrial-grade ZigBee solution, support transparent data transmission function; low power consumption design, the lowest working current can less than 1uA; supply 5 I/O channels, compatible 3 analog inputs and 2 pulse input counters. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
141 views3 pages

f8913 Zigbee Module Technical Specification - v2.0.0

F8913 ZigBee module is a kind of data terminal device that provides data transfer function by ZigBee network. The product uses high-performance industrial-grade ZigBee solution, support transparent data transmission function; low power consumption design, the lowest working current can less than 1uA; supply 5 I/O channels, compatible 3 analog inputs and 2 pulse input counters. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

F8913 ZigBee Module Technical Specification

Document version Confidential


V2.0.0

F8913 ZigBee Module TECHNICAL SPECIFICATION


General
F8913 ZigBee module is a kind of data terminal device that provides
data transfer function by ZigBee network.
The product uses high-performance industrial-grade ZigBee solution,
support transparent data transmission function; low power consumption
design, the lowest working current can less than 1uA; supply 5 I/O channels,
compatible 3 analog inputs and 2 pulse input counters.
It has been widely used on M2M fields, such as intelligent
transportation, smart grid, industrial automation, telemetry, finance, POS,
water supply, environment protection, post, weather, and so on.

Product Feature ---------------------------------------------------------------------------------------------------------------------------------------

Design for Industrial Application High-performance


High-powered industrial ZigBee chip Support ZigBee wireless data transmission
Low power consumption design, support multi-sleep Support repeater and end-device function
and trigger modes to reduce the power dissipation Support Point-to-Point, Point-to-Multipoint,
farthest Peer-to-Peer and Mesh network
Support UART Support 65000 nodes
Power range: DC 2.2~3.6V Support center node, route node and terminal node
Stability and Reliability Support broadcast and target address transfer
Support hardware and software WDT Wide communication range
Support auto recovery mechanism, including online Supply 5 I/O channels, compatible 3 analog inputs
detect, auto redial when offline to make it always and 2 pulse input counters.
online

Add Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China 1
http://en.four-faith.com Tel +86 592-5907276 Fax+86 592-5912735
F8913 ZigBee Module Technical Specification

Standard and Convenience


Adopt a miniature package, support 2.0mm spacing
stamp hole for SMT and 2.0mm spacing through-hole
pins simultaneous
Support intellectual mode, enter into communication
state automatically when powered, support several
work modes.
Convenient configuration and maintenance interface
Support for serial software upgrades

Product Specification-----------------------------------------------------------------------------------------------------------------
F8913 Model Sheet
Model Content
F8913-N-MS Without PASMT
F8913-E-MS With PASMT
F8913-N-NS Without PADIP
F8913-E-NS With PADIP

ZigBee Specification
Item Content
MCU Industrial ZigBee Platform
IEEE 802.15.4
Communication Protocol and Band
ISM2.42.5GHz
30m
Indoor/Urban Range
90m(With PA)
500m
Outdoor/RF Line-of-Sight Range
2000m(With PA)
2.82 mw (+4.5dBm)
Transmit Power
100 mw (+20dBm) (With PA)
RF Data Rate 250Kbps
-97dBm
Receiver Sensitivity
-103dBm (With PA)
Network Topologies Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Channels 11 to 26
Max serial buffer size 300 Bytes

Add Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China 2
http://en.four-faith.com Tel +86 592-5907276 Fax+86 592-5912735
F8913 ZigBee Module Technical Specification

Interface Type
Item Content
Data bits: 8
Stop bits: 1, 2
UART
Checksum: none,odd,even
Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,57600, 115200 bps
Antenna U.FL RF connector, impedance 50 ohm
Support 2.0mm spacing stamp hole for SMT and 2.0mm spacing through-hole
Package
pins simultaneous

Power Input
Item Content
Recommended Power DC 3.3V/0.5A
Power Range DC 2.8~3.6V@21dBm/[email protected]

Power Consumption
Working States Power Consumption typical value
RX Mode [email protected]
TX Mode [email protected] ,(the max pulse circuits 40mA )
F8913-N
Timing wake up [email protected]
Deep Sleep [email protected]

RX Mode [email protected]
TX Mode [email protected] ,(the max pulse circuits 200mA )
F8913-E
Timing wake up [email protected]
Deep Sleep [email protected]

Physical Characteristics
Item Content
Dimensions 37.5 x 22.1 x 2.8 mm
Weight 3.5 g

Environmental Limits
Item Content
Operating Temperature -40~+85C (-104~+185 F)
Storage Temperature -40~+125C (-104~+257F)
Operating Humidity 95% ( unfreezing)

Add Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China 3
http://en.four-faith.com Tel +86 592-5907276 Fax+86 592-5912735

You might also like