Basic Tools for Process Improvement

Module 6

FLOWCHART

FLOWCHART 1
 Basic Tools for Process Improvement

What is a Flowchart?
A Flowchart is a diagram that uses graphic symbols to depict the nature and flow of
the steps in a process (Viewgraph 1). Another name for this tool is "flow diagram."

When should teams use Flowcharts?

At the beginning of your process improvement efforts, an as-is Flowchart helps your
team and others involved in the process to understand how it currently works. The
team may find it helpful to compare this as-is Flowchart with a diagram of the way the
process is supposed to work. Later, the team will develop a Flowchart of the
modified process—again, to record how it actually functions. At some point, your
team may want to create an ideal Flowchart to show how you would ultimately like
the process to be performed. Among the benefits of using Flowcharts (Viewgraph 2)
are that they

! Promote understanding of a process by explaining the steps pictorially.

People may have differing ideas about how a process works. A Flowchart can
help you gain agreement about the sequence of steps. Flowcharts promote
understanding in a way that written procedures cannot do. One good
Flowchart can replace pages of words.

! Provide a tool for training employees. Because of the way they visually
lay out the sequence of process steps, Flowcharts can be very helpful in
training employees to perform the process according to standardized
procedures.

! Identify problem areas and opportunities for process improvement.

Once you break down the process steps and diagram them, problem areas
become more visible. It is easy to spot opportunities for simplifying and
refining your process by analyzing decision points, redundant steps, and
rework loops.

! Depict customer-supplier relationships, helping the process workers to

understand who their customers are, and how they may sometimes act as
suppliers and sometimes as customers in relation to other people.

Some practical applications for flowcharting are:

The steps in troubleshooting a broken turbine

The process used to fight a class BRAVO fire
How to clean a berthing compartment
The process used for getting the ship underway

2 FLOWCHART
 Basic Tools for Process Improvement

What Is a Flowchart?

A diagram that uses graphic

symbols to depict the nature

and flow of the steps in a

process.

FLOWCHART VIEWGRAPH 1

Benefits of Using Flowcharts

• Promote process understanding

• Provide tool for training
• Identify problem areas and improvement
opportunities
• Depict customer-supplier relationships

FLOWCHART VIEWGRAPH 2

FLOWCHART 3
 Basic Tools for Process Improvement

What symbols are used in Flowcharts?

The symbols that are commonly used in Flowcharts (Viewgraph 3) have specific
meanings and are connected by arrows indicating the flow from one step to
another:

Oval. Ovals indicate both the starting point and the ending point of the
process steps.

Box. A box represents an individual step or activity in the process.

Diamond. A diamond shows a decision point, such as yes/no or go/no-go.

Each path emerging from the diamond must be labeled with one of the
possible answers.

Circle. A circle indicates that a particular step is connected to another page

or part of the Flowchart. A letter placed in the circle clarifies the continuation.

Triangle. A triangle shows where an in-process measurement occurs.

What are the levels of Flowchart detail?

When you are developing a Flowchart, consider how it will be used and the amount
and kind of information needed by the people who will use it. This will help you
determine the level of detail to include. Viewgraph 4 compares the levels described
below using the process for producing the Plan of the Day (POD).

Macro level. The top leadership may not need the amount of detail required by the
workers in a process. A "big picture," or macro-level, view of the process may be
enough for their purposes. Generally, a macro-level Flowchart has fewer than six
steps. Think of it as a view of the ground from an airplane flying at 30,000 feet.

Mini level. The term "mini" or "midi" is used for a Flowchart that falls between the
big picture of the macro level and the fine detail of the micro level. Typically, it
focuses on only a part of the macro-level Flowchart. Using the airplane analogy,
you see the level of detail as if looking at the ground from 10,000 feet.

Micro level. People trying to improve the way a job is done need a detailed
depiction of process steps. The micro-level, or ground-level, view provides a very
detailed picture of a specific portion of the process by documenting every action
and decision. It is commonly used to chart how a particular task is performed.

4 FLOWCHART
 Basic Tools for Process Improvement

Symbols Used in Flowcharts

Start / End

Process Step

No
Decision
Yes

Connector

Measurement M

FLOWCHART VIEWGRAPH 3

Levels of Flowcharts
MACRO MINI MICRO
Turn on
Start Start computer

Start word
proc. applic.
Draft Get rough
POD draft of POD
Is
rough in No Type
word proc. rough POD
Type applic.
POD Is it No Get ?
approved approval Yes
?
Edit POD
Distribute
POD Yes
Are
Type there any Yes Make
smooth corrections corrections
End ?

No
End
Print POD

FLOWCHART VIEWGRAPH 4

FLOWCHART 5
 Basic Tools for Process Improvement

The label used is not important. What matters is that the people constructing a
Flowchart understand how the information is going to be used and the people
interpreting the chart understand the level of detail it presents.

How do we get started?

Many methods for constructing Flowcharts have been described and you can safely
use any one of them, as long as you start out by doing these things:

! Identify the right people to develop the chart.

! Determine what you expect to get from the Flowchart.
! Identify who will use it and how.
! Define the level of detail you need.
! Establish the boundaries of the process to be improved.

A word about boundaries. These are the starting and ending points for your
Flowchart. For example, process boundaries for a repair shop overhauling a pump
might be when the pump enters the shop and when it passes final testing. The
boundaries determine the number of activities to be studied and the number of
people involved in the process, functionally and cross-functionally.

At first, many teams struggle with the Flowchart tool. Team members may be unsure
about process boundaries or disagree on the level of detail needed. The first few
drawings quickly become a tangled mess of lines as steps are added, moved, and
reconnected. And most discouraging of all, workers may question the value of the
Flowchart and fail to use it in their daily work.

What are the keys to successful flowcharting?

Many of these difficulties can be avoided or overcome by applying the keys to
success outlined in Viewgraph 5. It is vital that you start by depicting the process
the way it really works, not the way you think it should work. You need to
chart the process as it is. Later you can chart it as it is supposed to work (by
regulation), or as you would like it to work (your ideal picture of the process). Here
are the keys:

! Start with the big picture. It is best to draw a macro-level Flowchart first.
After you’ve depicted this big picture of the process, you can develop other
diagrams with increased levels of detail.

! Observe the current process. A good way to start Flowcharting a process

is to walk through the current process, observing it in actual operation.

6 FLOWCHART
 Basic Tools for Process Improvement

Keys to Success

• Start with the big picture

• Observe the current process
• Record process steps
• Arrange the sequence of steps
• Draw the Flowchart

FLOWCHART VIEWGRAPH 5

FLOWCHART 7
 Basic Tools for Process Improvement

! Record the process steps you observed. Record the steps as they
actually occur in the process as it is. Write the steps on index cards or post-
itTM notes. You can use a different color to represent each individual or group
involved if that will help you to understand and depict the flow more accurately.

! Arrange the sequence of steps. Now arrange the cards or post-itTM notes
exactly as you observed the steps. Using cards lets you rearrange the steps
without erasing and redrawing and prevents ideas from being discarded simply
because it’s too much work to redraw the diagram.

! Draw the Flowchart. Depict the process exactly as you observed, recorded,
and arranged the sequence of steps.

What are the types of Flowcharts?

Besides the three levels of detail used to categorize Flowcharts, there are three main
types of Flowcharts—Linear, Deployment, and Opportunity. The level of detail
can be depicted as macro, mini, or micro for each of these types.

The viewgraphs that accompany the explanation below show how one process,
Producing the Plan of the Day (POD), might be depicted using each of the three
Flowchart types.

! Linear Flowchart. A Linear Flowchart (Viewgraph 6) is a diagram that

displays the sequence of work steps that make up a process.

This tool can help identify rework and redundant or unnecessary steps within a
process.

! Deployment Flowchart. A Deployment Flowchart [Ref. 5] shows the actual

process flow and identifies the people or groups involved at each step
(Viewgraph 7). Horizontal lines define customer-supplier relationships.

This type of chart shows where the people or groups fit into the process
sequence, and how they relate to one another throughout the process.

8 FLOWCHART
 Basic Tools for Process Improvement

Linear Flowchart Example

Producing the POD
Start A

Collect Type
inputs smooth

Draft POD
Sign POD

Type rough
Make copies
Retype POD

Submit to XO
Distribute
No
OK ?
Yes End
A

FLOWCHART VIEWGRAPH 6

Deployment Flowchart Example

Producing the POD
CMC YN XO

Collect
input
Type rough
Draft POD
Submit to XO

Retype POD No Accept

rough
Yes
?
Type smooth

Make copies
Sign POD

Distribute

FLOWCHART VIEWGRAPH 7

FLOWCHART 9
 Basic Tools for Process Improvement

! Opportunity Flowchart. An Opportunity Flowchart [Ref. 4]—a variation of

the basic linear type—differentiates process activities that add value from
those that add cost only (Viewgraph 8).

> Value-added steps (VA) are essential for producing the required product
or service. In other words, the output cannot be produced without them.

> Cost-added-only steps (CAO) are not essential for producing the required
product or service. They may be added to a process in anticipation of
something that might go wrong, or because of something that has gone
wrong. For example, end-of-process inspection might be instituted
because of defects, errors, or omissions that occurred in the past. Other
CAO steps may depend on actions in supplier processes—waiting for
approvals or the availability of equipment, for example.

Now let's look at the steps for constructing the three different kinds of Flowcharts.

How do we construct a Linear Flowchart?

Following are the seven steps for developing a Linear Flowchart (Viewgraph 9).

! Define the process to be flowcharted, and the purpose for flowcharting it.

! Assemble the right people to develop the Flowchart—those operators,

technicians, or office workers who are actually involved in the process.

! Establish process boundaries—the starting and ending points.

> Identify the major activities or subprocesses that are included in the
process.

> Determine what is not included in the scope of the process to remove any
doubt or confusion about the boundaries. This may also help establish the
scope of related processes.

! List the steps, activities, and decisions to be charted. If your team is not
sure about a step, mark it to be investigated later.

! Put the steps in chronological sequence. Sometimes it's easier to start

with the last step and work back to the first step.

! Assign Flowchart symbols such as boxes, diamonds, and triangles.

! Review and title the Flowchart.

10 FLOWCHART
 Basic Tools for Process Improvement

Opportunity Flowchart Example

Producing the POD
Value Added Cost Added Only
A
CMC collect
input

POD need Yes

CMC retyped ?
draft input
No

YN type
YN smooth
type rough

XO
sign POD YN
YN retype
submit rough
to XO
YN copy and
distribute POD
A

FLOWCHART VIEWGRAPH 8

Constructing a Linear Flowchart

Define the process
and the purpose

Assemble the
right people

Establish
process boundaries

List steps, activities,

and decisions

Are
steps in No
Put steps in sequence
sequence
?

Yes

Assign Flowchart symbols

Review and
label Flowchart

FLOWCHART VIEWGRAPH 9

FLOWCHART 11
 Basic Tools for Process Improvement

How do we construct a Deployment Flowchart?

To develop a Deployment Flowchart (Viewgraph 10), follow the basic steps for
constructing a Linear Flowchart, but modify them as follows:

! List the major steps of the process vertically on the left side of a sheet
of paper.

! List the responsible process workers across the top, each in a separate
column.

! Place each step in the appropriate column under the responsible process
worker's name.

! Connect the steps in the order in which they relate to each other.

NOTE: Every horizontal line in a Deployment Flowchart identifies a customer-

supplier relationship.

How do we construct an Opportunity Flowchart?

To construct an Opportunity Flowchart (Viewgraph 11), you need to distinguish
value-added from cost-added-only steps. You may want to review how to
differentiate these steps under the description of Opportunity Flowcharts that
precedes this discussion.

Starting with your Linear Flowchart, evaluate each step before placing it in the
Opportunity format.

! Divide your paper into two columns headed Value Added (VA) and Cost
Added Only (CAO).

! List the steps in the process in these columns vertically, all VA steps in
one column and all CAO steps in the other.

! Connect the steps.

12 FLOWCHART
 Basic Tools for Process Improvement

Constructing a Deployment Flowchart

Changing Oil
CHUCK NANCY BOB

Decide to Get rags & tools

Warm up engine
change oil

Oil &
Shut off engine filter on hand
No ?
Buy oil & filter
Yes

Change oil
& filter

Clean up &
put tools away

FLOWCHART VIEWGRAPH 10

Constructing an Opportunity Flowchart

Changing Oil
VALUE ADDED COST ADDED ONLY
Decide to change oil

Warm up engine

Shut off engine

Get rags and tools

Oil & filter No

on hand? Buy oil & filter

Yes
Change oil & filter

Clean up
& put tools away

FLOWCHART VIEWGRAPH 11

FLOWCHART 13
 Basic Tools for Process Improvement

How do we interpret our Flowcharts?

A Flowchart will help you understand your process and uncover ways to improve it
only if you use it to analyze what is happening. Interpreting your Flowchart will help
you to (Viewgraph 12)

! Determine who is involved in the process.

! Form theories about root causes.
! Identify ways to streamline the process.
! Determine how to implement changes to the process.
! Locate cost-added-only steps.
! Provide training on how the process works or should work.

Below is a sequence of steps that will help you through an orderly analysis of your
Flowchart (Viewgraph 13).

Step 1 - Examine each process step for the following conditions that indicate a
need to improve the process:

! Bottlenecks. These points in the process where it slows down may be caused
by redundant or unnecessary steps, rework, lack of capacity, or other factors.
In the Fire Drill Preparation example depicted in Viewgraph 15, the "Monitors
go to Logroom to get red hats. . ." step indicates a potential bottleneck. The
rework loop identified as connector "B" is one of several in this diagram.

! Weak links. These are steps where problems occur because of inadequate
training of process workers, equipment that needs to be repaired or replaced,
or insufficient technical documentation. "Inform the drill leader and improvise"
is one of the weak links depicted in Viewgraph 15.

! Poorly defined steps. Steps which are not well-defined may be interpreted and
performed in a different way by each person involved, leading to process
variation. "Improvise" is a poorly defined step in the weak link cited above.

! Cost-added-only steps. Such steps add no value to the output of the process
and should be earmarked for elimination. If the Fire Drill Preparation process
in Viewgraph 15 were depicted as an Opportunity Flowchart, "Search the boat
for red hats" would be one of many cost-added-only steps.

Step 2 - Examine each decision symbol. You may want to collect data on how
often there is a "yes" or "no" answer at decision points marked by a diamond-
shaped symbol. If most decisions go one way rather than the other, you may be
able to remove this decision point.

14 FLOWCHART
 Basic Tools for Process Improvement

Interpreting Your Flowchart

• Determine who is involved
• Form theories about root causes
• Identify ways to simplify and refine
• Determine how to implement changes
• Locate cost-added-only steps
• Provide training

FLOWCHART VIEWGRAPH 12

Interpretation Steps
Step 1 - Examine each process step
Bottlenecks? Weak links? Poorly defined
steps? Cost-added-only steps?

Step 2 - Examine each decision symbol

Can this step be eliminated?

Step 3 - Examine each rework loop

Can it be shortened or eliminated?

Step 4 - Examine each activity symbol

Does the step add value for the end-user?

FLOWCHART VIEWGRAPH 13

FLOWCHART 15
 Basic Tools for Process Improvement

Step 3 - Examine each rework loop. Processes with numerous checks generate
rework and waste. Examine the activities preceding the rework loop and identify
those that need to be improved. Look for ways to shorten or eliminate the loop.

Step 4 - Examine each activity symbol. Does the step help build a key quality
characteristic into the end product? If not, consider eliminating it. (See the Data
Collection module for a discussion of key quality characteristics.)

What pitfalls do we need to watch out for?

Throughout this discussion, we have assumed that the Flowchart you are analyzing
reflects the way the process actually functions in the work environment. This is often
not the case. There are a number of things that can go wrong when you create your
Flowchart that may interfere with interpretation and full understanding of the process.

> Those developing the Flowchart may have drawn it to represent the
process as they envision it, not as it is.

> People may be reluctant to depict the obviously illogical parts of the
process for fear they will be called upon to explain why they allowed it to be
that way.

> Rework loops are either not seen or not documented because people
assume rework is small and inevitable.

> People drawing the Flowchart truly do not know how the process works.

You need to avoid these pitfalls when developing your Flowchart and take measures
to correct them when they are revealed through Flowchart interpretation.

16 FLOWCHART
 Basic Tools for Process Improvement

How can we practice what we've learned?

The following exercises will enable you to practice what you’ve learned, first by
flowcharting a prepared example, then by creating a Flowchart of a familiar process,
and finally, by analyzing a Flowchart provided as an example.

EXERCISE 1: Develop a Flowchart of the Cut Grass Process. The facilitator

should prepare this exercise by writing each step of the process shown in Viewgraph
14 on a separate post-itTM and then placing the post-itsTM randomly on a chartpack.
The team will use the post-itsTM to develop a Flowchart of the Cut Grass Process.
The facilitator should assist the team in determining and depicting the following:

! Starting and ending points of the process

! Sequence of the steps written on the post-itsTM

! Decision points

! Appropriate symbols and connectors to use

Viewgraph 14 is an example of a possible Flowchart for the Cut Grass Process.

FLOWCHART 17
 Basic Tools for Process Improvement

EXERCISE 1
Flowchart for Cut Grass Process
Spouse says Prepare to cut Put mower away
Cut the grass
“Cut the grass.” the grass

Spouse says
“Cut grass”
Start
lawnmower Does Yes
Open garage lawnmower Wash
need to be Get hose
door mower
washed
Mow the yard ?
No
Pull lawnmower
to driveway
Turn lawnmower Return mower
off to garage
Check gas
and oil

Close garage
door
Need Put in gas
gas or Get gas & oil
and oil
oil from garage
Yes as needed
?
No

FLOWCHART VIEWGRAPH 14

18 FLOWCHART
 Basic Tools for Process Improvement

EXERCISE 2: Construct a Macro-Level Linear Flowchart. In this exercise, the

team will first select a process to be flowcharted from suggestions made by team
members. Then, using a chartpack, the facilitator will help them work through the
process of constructing a macro-level Flowchart of the selected process. The
following questions will help the team through a logical Flowchart development
process:

Step 1 - What process will we flowchart? Select a process to flowchart from

participant suggestions.

Step 2 - What do we do first? Define the purpose of the Flowchart.

Step 3 - Who should be involved? Discuss who should be on the team that
develops the Flowchart.

Step 4 - What are the process boundaries? Establish the starting and ending
points of the process.

Step 5 - What are the process steps? List the steps.

Step 6 - What is the sequence of steps? Determine the order in which process
activities occur.

Step 7 - What symbols should we use and how do we connect them? Assign
the appropriate symbols for the steps and connect them with arrows.

FLOWCHART 19
 Basic Tools for Process Improvement

EXERCISE 3: Analyze the Fire Drill Preparation Flowchart. The facilitator

should give the team members a few minutes to study Viewgraph 15, then guide
them through an interpretation of this Flowchart based on the following questions:

! Is the process flow depicted so you can follow it?

! What would you change?

! What level of Flowchart is this?

! What type of Flowchart is this?

! Are the symbols properly used?

! What bottlenecks, weak links, or poorly defined steps are shown?

Some examples of these potential trouble spots were given in Step 1

of the Flowchart interpretation process, but there are others.

! What cost-added-only steps can you identify?

An example of a cost-added-only step was given in Step 1 of the

Flowchart interpretation process, but there are others.

! Can you identify places where it would be useful to take data?

! Are there any rework loops that could be shortened or eliminated?

! What steps do you think could be eliminated?

20 FLOWCHART
 Basic Tools for Process Improvement

EXERCISE 3
Fire Drill Preparation Flowchart
Complete the
M Put simulation
Drill Brief
Time 1 A Drill monitors on the
test the radios appropriate
First drill gages
Verify initial
in set? No conditions set
Yes
Monitors go to Logroom to get red
hats, radios, and drill props Drill leaders walk
around to ensure Initial No
all monitors are conditions B
Props No Search on station set?
available? Torpedo Room Props?
Yes
Yes No
Yes
Find the CO

Inform the drill All No Find them

leader and improvise personnel
on station and put them
? on station Obtain CO’s
Yes permission
No Radios
Radios Check with still not
available? Radiomen available Correct
? Spot check safety No
No intervention points Permission discrepancies
Yes to
Yes initiate? for the CO

Borrow from Yes

Quartermasters Yes
No Search the Discrepancy?
Enough boat for Correct it
red hats? Initiate
red hats the drill
No
Yes
B Order initial M
Drill monitors conditions set
take station A Time 2

FLOWCHART VIEWGRAPH 15

FLOWCHART 21
 Basic Tools for Process Improvement

REFERENCES:
1. Brassard, M. (1988). The Memory Jogger, A Pocket Guide of Tools for
Continuous Improvement, pp. 9 - 13. Methuen, MA: GOAL/QPC.

2. Department of the Navy (November 1992). Fundamentals of Total Quality

Leadership (Instructor Guide), pp. 6-12 - 6-19. San Diego, CA: Navy Personnel
Research and Development Center.

3. Department of the Navy (September 1993). Systems Approach to Process

Improvement (Instructor Guide), pp. 1-60 - 1-63; 5-50 - 5-63. San Diego, CA:
OUSN Total Quality Leadership Office and Navy Personnel Research and
Development Center.

4. Hacquebord, H. (1990). A Strategy for Helping Managers to Change.

5. Tribus, M. (June 1989). Deployment Flowcharting (workbook and videotapes).

Los Angeles, CA: Quality and Productivity, Inc.

22 FLOWCHART
 What Is a Flowchart?
A diagram that uses graphic
symbols to depict the nature
and flow of the steps in a
process.
FLOWCHART VIEWGRAPH 1
 Benefits of Using Flowcharts
• Promote process understanding
• Provide tool for training
• Identify problem areas and improvement
opportunities
• Depict customer-supplier relationships
FLOWCHART VIEWGRAPH 2
 Symbols Used in Flowcharts
Start / End
Process Step
No
Decision
Yes
Connector
Measurement M
FLOWCHART VIEWGRAPH 3
 Levels of Flowcharts
MACRO MINI MICRO
Turn on
Start Start computer
Start word
proc. applic.
Draft Get rough
POD draft of POD
Is
rough in No Type
word proc. rough POD
Type applic.
POD Is it No Get ?
approved approval Yes
?
Edit POD
Distribute
POD Yes
Are
Type there any Yes Make
smooth corrections corrections
End ?
No
End
Print POD
FLOWCHART VIEWGRAPH 4
 Keys to Success
• Start with the big picture
• Observe the current process
• Record process steps
• Arrange the sequence of steps
• Draw the Flowchart
FLOWCHART VIEWGRAPH 5
 Linear Flowchart Example
Producing the POD
Start A
Collect Type
inputs smooth
Draft POD
Sign POD
Type rough
Make copies
Retype POD
Submit to XO
Distribute
No
OK ?
Yes End
A
FLOWCHART VIEWGRAPH 6
 Deployment Flowchart Example
Producing the POD
CMC YN XO
Collect
input
Type rough
Draft POD
Submit to XO
Retype POD No Accept
rough
?
Type smooth Yes
Make copies
Sign POD
Distribute
FLOWCHART VIEWGRAPH 7
 Opportunity Flowchart Example
Producing the POD
Value Added Cost Added Only
A
CMC collect
input
POD need Yes
CMC retyped ?
draft input
No
YN type
YN smooth
type rough
XO
sign POD YN
YN retype
submit rough
to XO
YN copy and
distribute POD
A
FLOWCHART VIEWGRAPH 8
 Constructing a Linear Flowchart
Define the process
and the purpose
Assemble the
right people
Establish
process boundaries
List steps, activities,
and decisions
Are
steps in No
Put steps in sequence
sequence
?
Yes
Assign Flowchart symbols
Review and
label Flowchart
FLOWCHART VIEWGRAPH 9
 Constructing a Deployment Flowchart
Changing Oil
CHUCK NANCY BOB
Decide to Get rags & tools
Warm up engine
change oil
Oil &
Shut off engine filter on hand
No ?
Buy oil & filter
Yes
Change oil
& filter
Clean up &
put tools away
FLOWCHART VIEWGRAPH 10
Constructing an Opportunity Flowchart
Changing Oil
VALUE ADDED COST ADDED ONLY
Decide to change oil
Warm up engine
Shut off engine
Get rags and tools
Oil & filter No
on hand? Buy oil & filter
Yes
Change oil & filter
Clean up
& put tools away
FLOWCHART VIEWGRAPH 11
 Interpreting Your Flowchart
• Determine who is involved
• Form theories about root causes
• Identify ways to simplify and refine
• Determine how to implement changes
• Locate cost-added-only steps
• Provide training
FLOWCHART VIEWGRAPH 12
 Interpretation Steps
Step 1 - Examine each process step
Bottlenecks? Weak links? Poorly defined
steps? Cost-added-only steps?
Step 2 - Examine each decision symbol
Can this step be eliminated?
Step 3 - Examine each rework loop
Can it be shortened or eliminated?
Step 4 - Examine each activity symbol
Does the step add value for the end-user?
FLOWCHART VIEWGRAPH 13
 EXERCISE 1
Flowchart for Cut Grass Process
Spouse says Prepare to cut Put mower away
Cut the grass
“Cut the grass.” the grass
Spouse says
“Cut grass”
Start
lawnmower Does Yes
Open garage lawnmower Wash
need to be Get hose
door mower
washed
Mow the yard ?
No
Pull lawnmower
to driveway
Turn lawnmower Return mower
off to garage
Check gas
and oil
Close garage
door
Need Put in gas
gas or Get gas & oil
and oil
oil from garage
Yes as needed
?
No
FLOWCHART VIEWGRAPH 14
 EXERCISE 3
Fire Drill Preparation Flowchart
Complete the
M Put simulation
Drill Brief
Time 1 A Drill monitors on the
test the radios appropriate
First drill gages
Verify initial
in set? No conditions set
Yes
Monitors go to Logroom to get red
hats, radios, and drill props Drill leaders walk
around to ensure
Initial No
all monitors are conditions B
Props No Search on station set?
available? Torpedo Room Props?
Yes
Yes No
Yes
Find the CO
Inform the drill All No Find them
leader and improvise personnel
on station and put them
? on station Obtain CO’s
Yes permission
No Radios
Radios Check with still not
available? Radiomen available Correct
? Spot check safety No
Yes No intervention points
Permission discrepancies
Yes to
initiate? for the CO
Borrow from Yes
Quartermasters Yes
Enough No Search the Discrepancy? Correct it
red hats? boat for Initiate
red hats the drill
No
Yes
B Order initial M
Drill monitors conditions set
take station A Time 2
FLOWCHART VIEWGRAPH 15