Scribd
Upload
295 views1 page

SMPSChart

This document compares different power supply topologies based on their maximum power output, efficiency, cost, components required, and input/output voltage ranges. It lists several non-isolated topologies like buck, boost, buck-boost and SEPIC that have a single inductor and can output voltages lower or higher than the input voltage. It also describes several isolated topologies like flyback, forward, push-pull and half-bridge that use a transformer to provide isolation between the input and output. These topologies can output voltages in both directions from the input but require more components. The resonant LLC topology is also mentioned, which uses a transformer and resonant tank to achieve high efficiency of 90% but has

Uploaded by

Phương Linh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
295 views1 page

SMPSChart

This document compares different power supply topologies based on their maximum power output, efficiency, cost, components required, and input/output voltage ranges. It lists several non-isolated topologies like buck, boost, buck-boost and SEPIC that have a single inductor and can output voltages lower or higher than the input voltage. It also describes several isolated topologies like flyback, forward, push-pull and half-bridge that use a transformer to provide isolation between the input and output. These topologies can output voltages in both directions from the input but require more components. The resonant LLC topology is also mentioned, which uses a transformer and resonant tank to achieve high efficiency of 90% but has

Uploaded by

Phương Linh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Pow-

Maximum Universal
er Power Typical Relative Magnetics DC Transfer Function Multiple VOUT<VIN VOUT>VIN
Topology Schematic Practical Input
Sup- (Watts) Efficiency Cost Required (VOUT/VIN) Outputs Range Range
Duty Cycle (90-264) VAC
ply

Single
Buck 500 85 1 D 0.9 No No Yes No
Inductor

Single 1
_____
Boost 150 70 1 0.9 No No No Yes
Inductor 1D
Non-Isolated Topologies

Buck- Single D
_____
150 70 1 0.9 No No Yes Yes
Boost Inductor 1D

Coupled or D
SEPIC 150 75 1.2 Two _____ 0.9 No No Yes Yes
Inductors 1D

Coupled or D
uk 150 75 1.2 Two _____ 0.9 No No Yes Yes
Inductors 1D

__________
DCM
Flyback
150 75 1.5 Transformer

Dx ________
TxVout
2xIout xLP
0.9 Yes Yes Yes Yes

Transformer 2Ns
Forward 150 75 1.8 and ___ xD 0.45 Yes Yes Yes Yes
Inductor Np
Isolated Topologies

Transformer Ns
Push- ___
500 80 1.8 and xD 0.45 No Yes Yes Yes
Pull Np
Inductor

Transformer Ns
Half- ___
500 85 2 and xD 0.45 Yes Yes Yes Yes
Bridge Np
Inductor

Frequency
Resonant Transformer Dependent Based
500 90 2 0.45 Yes Yes Yes Yes
LLC on Resonant Tank
Transfer Function

13

You might also like