Scribd Logo
Upload

Welcome to Scribd!

  • 547 views

    Dimensions of Spiral Wound Gaskets ASME B16

    Uploaded by

    Alma Jakirović
    The document provides specifications for spiral wound gasket dimensions according to ASME B16.20 for use with raised face flanges per ASME B16.5. It includes inner and outer diameter dimensions for the inner ring, sealing element, and outer ring for pipe sizes from 1/2 to 24 inches in pressure classes from 150 to 2500. General notes provide additional information on tolerances, material thicknesses, applicable pressure classes and pipe sizes, minimum inner ring widths, and required use of solid metal inner rings.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Dimensions of Spiral Wound Gaskets ASME B16

    Uploaded by

    Alma Jakirović
    547 views3 pages
    The document provides specifications for spiral wound gasket dimensions according to ASME B16.20 for use with raised face flanges per ASME B16.5. It includes inner and outer diameter dimensions for the inner ring, sealing element, and outer ring for pipe sizes from 1/2 to 24 inches in pressure classes from 150 to 2500. General notes provide additional information on tolerances, material thicknesses, applicable pressure classes and pipe sizes, minimum inner ring widths, and required use of solid metal inner rings.

    Original Description:

    all

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for spiral wound gasket dimensions according to ASME B16.20 for use with raised face flanges per ASME B16.5. It includes inner and outer diameter dimensions for the inner ring, sealing element, and outer ring for pipe sizes from 1/2 to 24 inches in pressure classes from 150 to 2500. General notes provide additional information on tolerances, material thicknesses, applicable pressure classes and pipe sizes, minimum inner ring widths, and required use of solid metal inner rings.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    547 views3 pages

    Dimensions of Spiral Wound Gaskets ASME B16

    Uploaded by

    Alma Jakirović
    The document provides specifications for spiral wound gasket dimensions according to ASME B16.20 for use with raised face flanges per ASME B16.5. It includes inner and outer diameter dimensions for the inner ring, sealing element, and outer ring for pipe sizes from 1/2 to 24 inches in pressure classes from 150 to 2500. General notes provide additional information on tolerances, material thicknesses, applicable pressure classes and pipe sizes, minimum inner ring widths, and required use of solid metal inner rings.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3
    At a glance
    Powered by AI
    The document provides specifications for dimensions of spiral wound gaskets according to ASME B16.20 for different pipe sizes and pressure classes.

    d1 refers to the inside diameter when an inner ring is used. d2 refers to the inside diameter of the sealing element when no inner ring is used. d3 refers to the outside diameter of the sealing element. d4 refers to the outside diameter of the outer ring.

    The thickness of the inner and outer ring is 2.97-3.33 mm. The thickness of the sealing element is 4.45 mm.

    Dimensions of Spiral Wound Gaskets ASME B16.

    20
    used with Raised Face flanges ASME B16.5

    Class 150 | 300 | 400 | 600 | 900 | 1500 | 2500


    Class 600 NPS 1/2-24
    Inner Ring Sealing Element Outer Ring
    NPS Inside (d1) Inside (d2) Outside (d3) Outside (d4)
    Dia. Dia. Dia. Dia.

    1/2 14.2 19.1 31.8 54.1

    3/4 20.6 25.4 39.6 66.8

    1 26.9 31.8 47.8 73.2

    1 38.1 47.8 60.5 82.6

    1 44.5 54.1 69.9 95.3

    2 55.6 69.9 85.9 111.3

    2 66.5 82.6 98.6 130.3

    3 78.7 101.6 120.7 149.4

    4 102.6 120.7 149.4 193.8

    5 128.3 147.6 177.8 241.3

    6 154.9 174.8 209.6 266.7

    8 205.7 225.6 263.7 320.8

    10 255.3 274.6 317.5 400.1

    12 307.3 327.2 374.7 457.2

    14 342.9 362 406.4 492.3

    16 389.9 412.8 463.6 565.2

    18 438.2 469.9 527.1 612.9

    20 489 520.7 577.9 682.8

    24 590.6 628.7 685.8 790.7


    Inside (d1) Inside (d2) Outside (d3) Outside (d4)
    NPS Dia. Dia. Dia. Dia.

    Inner Ring Sealing Element Outer Ring


    General notes:
    Dimensions are in millimeters unless otherwise indicated.
    Image shows a Spiral Wound gasket with Inner - and Outer ring.
    d1 = Inside diameter when Inner ring is used.
    d2 = Inside diameter sealing element when no Inner ring is used.
    d3 = Outside diameter of sealing element.
    d4 = Outside diameter of Outer ring.
    Thickness of inner and outer ring: 2.97 mm - 3.33 mm.
    Thickness sealing element: 4.45 mm.
    Tolerance Outside diameter for NPS 1/2 through NPS 8 is 0.8 mm; for NPS 10 trough NPS
    24 tolerance is + 1.5 mm - 0.8 mm.
    ASME B16.20 does not covers class 400 flanges up to NPS 3 and class 900 flanges up to NPS
    2.
    There are no class 400 flanges NPS 1/2 thru NPS 3 (use Class 600), class 900 flanges NPS 1/2
    thru NPS 2 (use Class 1500), or class 2500 flanges NPS 14 or larger.
    The inner ring inside diameters shown for NPS 1 thru 2 in class 1500 and 2500 will
    produce inner ring widths of 0.12 inches, a practical minimum for production purposes.
    ASME B16.20 which covers spiral wound gaskets requires the use of solid metal inner rings in:
    Pressure Class 900, nominal pipe sizes 24 and larger, Pressure Class 1500 from nominal pipe
    sizes 12 and larger, Pressure Class 2500 from nominal pipe sizes 4 and larger and all PTFE
    filled gaskets.
    MARKING OF SPIRAL WOUND GASKETS

    You might also like