Scribd
Upload
214 views2 pages

Class 150 Flanges PDF

This document provides dimensional specifications for Class 150 flanges in nominal pipe sizes from 1/2 inch to 24 inches. It includes dimensions for bolt hole sizes and spacing, flange thickness and diameters, and other measurements needed to design flanges and flanged connections. Weight ranges are also listed for various flange types from slip-on to socket weld. All dimensions and tolerances comply with ANSI B16.5 standards for carbon steel flanges.

Uploaded by

Deny Safari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
214 views2 pages

Class 150 Flanges PDF

This document provides dimensional specifications for Class 150 flanges in nominal pipe sizes from 1/2 inch to 24 inches. It includes dimensions for bolt hole sizes and spacing, flange thickness and diameters, and other measurements needed to design flanges and flanged connections. Weight ranges are also listed for various flange types from slip-on to socket weld. All dimensions and tolerances comply with ANSI B16.5 standards for carbon steel flanges.

Uploaded by

Deny Safari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Flange Dimension 150

Dimensions for Class 150 Flanges

Nom. No. and**


Bolt
Pipe Dia. of
O Q R X Circle YY H J Y B R YY BB Z
Size Bolt
Dia
(inches) Holes
1/2 3.50 .44 1.38 1.19 4-0.62 2.38 1.88 .84 .62 .62 .88 .12 .62 .90 .38
3/4 3.88 .50 1.69 1.50 4-0.62 2.75 2.06 1.05 .82 .62 1.09 .12 .62 1.11 .44
1 4.25 .56 2.00 1.94 4-0.62 3.12 2.19 1.32 1.05 .69 1.36 .12 .69 1.38 .50
11/4 4.62 .62 2.50 2.31 4-0.62 3.50 2.25 1.66 1.38 .81 1.70 .19 .81 1.72 .56
11/2 5.00 .68 2.88 2.56 4-0.62 3.88 2.44 1.90 1.61 .88 1.95 .25 .88 1.97 .62
2 6.00 .75 3.62 3.06 4-0.75 4.75 2.50 2.38 2.07 1.00 2.44 .31 1.00 2.46 .69
21/2 7.00 .88 4.12 3.56 4-0.75 5.50 2.75 2.88 2.47 1.12 2.94 .31 1.12 2.97 .75
3 7.50 .94 5.00 4.25 4-0.75 6.00 2.75 3.50 3.07 1.19 3.57 .38 1.19 3.60 .81
31/2 8.50 .94 5.50 4.81 8-0.75 7.00 2.81 4.00 3.55 1.25 40.70 .38 1.25 4.10

4 9.00 .94 6.19 5.31 8-0.75 7.50 3.00 4.50 4.03 1.31 4.57 .44 1.31 4.60

5 10.00 .94 7.31 6.44 8-0.88 8.50 3.50 5.56 5.05 1.44 5.66 .44 1.44 5.69

6 11.00 1.00 8.50 7.56 8-0.88 9.50 3.50 6.63 6.07 1.56 6.72 .50 1.56 6.75

8 13.50 1.12 10.62 9.69 8-0.88 11.75 4.00 8.63 7.98 1.75 8.72 .50 1.75 8.75

10 16.00 1.19 12.75 12.00 12-1.00 14.25 4.00 10.75 10.02 1.94 10.88 .50 1.94 10.92

12 19.00 1.25 15.00 14.38 12-1.00 17.00 4.50 12.75 12.00 2.19 12.88 .50 2.19 12.92

14 21.00 1.38 16.25 15.75 12-1.12 18.75 5.00 14.00 2.25 14.14 .50 3.12 14.18

16 23.50 1.44 18.50 18.00 16-1.12 21.25 5.00 16.00 To Be 2.50 16.16 .50 3.44 16.19
Specified
18 25.00 1.56 21.00 19.88 16-1.25 22.75 5.50 18.00 by 2.69 18.18 .50 3.81 18.20
Purchaser
20 27.50 1.69 23.00 22.00 20-1.25 25.00 5.69 20.00 2.88 20.2 .50 4.06 20.25

24 32.00 1.88 27.25 26.12 20-1.38 29.50 6.00 24.00 3.25 24.25 .50 4.38 24.25

The following charts are for reference use only. They are based upon older piping systems. Refer to current specifications when
designing new systems
Weight (L.B.S.)*** Flange Types
Nom.
Pressure Weld
Size Slip-On Thd. Lap Joint Blind Socket
Class Neck
Pipe

150 1/2 2 1 1 1 2 2
3/4 2 1.5 1.5 1.5 2 2
1 2.5 2 2 2 2 2
11/4 2.5 2.5 2.5 2.5 3 3
11/2 4 3 3 3 3 3
2 6 5 5 5 4 5
21/2 10 8 8 8 7 7
3 11.5 9 10 9 9 8
31/2 12 11 12 11 13

4 16.5 13 13 12 17

5 21 15 15 13 20

6 26 17 19.5 18 27

8 42 28 30 28 47

10 54 40 41 36 67

12 88 61 65 60 123

14 114 83 85 77 139

16 142 106 93 104 187

18 165 109 120 146 217

20 197 148 155 159 283

24 268 204 210 195 415


All dimensions given in inches.

Dimensions & tolerances in accordance with ANSI B16.5. Carbon


steel flanges mechanical properties and chemistry conform to ASTM
A105.

Flanges are furnished faced, drilled and spot faced or back faced.

*1/16 in. raised face included in dimensions Q, Y and YY.

**Bolt hole diameter 1/8 in. larger than bolt diameter.

***Weights listed are approximate values.

**** To be specified by the customer

You might also like