Prox td001 - en P

Technical Data
Inductive Proximity Sensors

Bulletin Numbers 802PR, 871C, 871D, 871F, 871FM, 871L, 871P, 871R, 871T, 871TM, 871 TS, 871Z, 871ZC, 871ZT, 872C, 872L
Topic Page
Tubular Sensors
871C Special Purpose 2
871T Stainless Steel Barrel 14
871TM All Stainless Steel 20
871TS Food and Beverage 42
871Z Weld Field Immune 43
871ZT Weld Field Immune 47
872C WorldProx General Purpose 48
Rectangular Sensors
802PR Limit Switch Style 52
871F Block, Flat Pack, and Puck Style 61
871FM Mini Flat Pack Style 71
871L and 872L Limit Switch Style 78
871P Can Sensors 82
871P VersaCube Multi-position 86
Cylinder Sensors
871D Cylinder Positioning 94
871D WorldClamp 96
Ring and Slot Sensors
871R Ring Style 98
871S Slot Style 100
Summary of Changes
This publication contains updated 871TM sensor correction factors for copper targets on pages 20, 30, 32, 35, and 38.
871C 2-wire AC Full Featured Tubular Sensors

Plastic Face/Threaded Nickel-plated Brass Barrel
Specifications
Attribute 12 mm 18 mm and 30 mm
Load Current 5200 mA 5250 mA
Inrush Current (one cycle) 2 A 4 A
Leakage Current 1.9 mA @ 120V AC
Operating Voltage 20250V AC
871C AC Cable Style Voltage Drop 10V @ 5200 mA 10V @ 5250 mA

18 mm and 30 mm Repeatability 10% at constant temperature
Hysteresis 10% typical
False pulse, transient noise, short circuit, False pulse, transient noise, short circuit,
Protection Type overload (trigger at 250 mA typical) overload (trigger at 320 mA typical)
Certifications UL Listed, CSA Certified, and CE Marked for all applicable directives
Enclosure Type Rating NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13; IP67 (IEC529)
Housing Material Nickel plated brass barrel
Connection Type Cable: 2 m (6.5 ft) length, 2-conductor PVC

Quick-disconnect: 3-pin micro, 3-pin mini
871C AC Mini Quick-disconnect Style
Red: Output energized/short circuit (flashing)
12 mm, 18 mm, and 30 mm Status Indicator
Green: Power
Operating Temperature -25+70 C (-13+158 F)
Shock 30 g (1.06 oz), 11 ms
Vibration 55 Hz, 1 mm (0.04 in.) amplitude, 3 planes
Correction Factors
871C AC Micro Quick-disconnect Style
Target Material Correction Factors
12 mm, 18 mm, and 30 mm
Steel 1.0
Stainless Steel 0.9
Brass 0.5
Aluminum 0.45
Copper 0.4
2 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

Cable Style Normally Open Normally Closed
2 Status Brown Brown

Indicators
2 m (6.5 ft) Blue Load Blue Load
Green Green
A C B
Note: Load can be switched to brown wire.
D
mm (in.)
Thread Size Shielded
A B C D
M12 x 1 Yes 12.0 (0.47) 78.99 (3.11) 47.24 (1.86)
M18 x 1 Yes 18.0 (0.71) 74.68 (2.94) 61.6 (2.43) 0.8 (0.03)
M30 X 1.5 Yes 30.0 (1.18) 77.52 (3.05) 64.31 (2.53)
Mini QD Style Normally Open or Normally Closed

Ground Note: No ground wire on 12 mm. Attach housing
2 Status A to ground.
Indicators
D Note: Load can be switched to pin 3.
1
2 3
C
B
Load
7/8-16-UN-2A
mm (in.)
Thread Size
A B C
M12 x 1 12.0 (0.47) 93.45 (3.68) 46.08 (1.81)
M18 x 1 18.0 (0.71) 75.82 (2.99) 53.9 (2.12)
M30 X 1.5 30.0 (1.18) 86.66 (3.41) 64.31 (2.53)
Micro QD Style Normally Open or Normally Closed
Ground Note: No ground wire on 12 mm. Attach housing

A to ground.
1
2 Status D 2 3 Load Note: Load can be switched to pin 2.

Indicators
C
B
M12 x 1
mm (in.)
Thread Size
A B C
M12 x 1 12.0 (0.47) 90.42 (3.56) 46.99 (1.85)
M18 x 1 18.0 (0.71) 83.54 (3.29) 61.6 (2.43)
M30 X 1.5 30.0 (1.18) 86.00 (3.39) 64.31 (2.53)
Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 3

871C 2-wire AC Plastic Barrel Tubular Sensors

Plastic Face/Threaded
Specifications
Attribute 18 mm 30 mm
871C AC Cable Style Leakage Current 1.7 mA

18 mm and 30 mm Operating Voltage 24250V AC
Voltage Drop 11V
Protection Type Transient noise
Certifications CE Marked for all applicable directives
Enclosure Type Rating NEMA 1, 2, 3, 4, 4X, 12, 13; IP67 (IEC529)
Housing Material Plastic barrel
Status Indicator Red: Output energized
Shock 30 g (1.06 oz), 11 ms
Vibration 55 Hz, 1 mm (0.039 in.) amplitude, 3 planes
Correction Factors
Steel 1.0
Stainless Steel 0.70.8
Brass 0.40.5
Aluminum 0.30.4
Copper 0.30.4


Status Black Black
Indicator
Blue Load Blue
Load
2 m (6.5 ft)
Note: Load can be switched to black wire.
C B
A
D
mm (in.)
A B C D
Yes
M18x 1 18.0 (0.71)
No(1)
81.0 (3.19) 61.0 (2.40) 2.0 (0.08)
Yes
M30 X 1.5 30.0 (1.18)
No (1)
(1) Unshielded proximity sensors require a metal-free zone around the sensing face. Any metal immediately opposite the sensing face must be no closer than three times the rated nominal sensing distance of the sensor.

871C Analog Output, 3-wire DC Tubular Sensors

Plastic Face/Nickel-plated Brass Barrel
Specifications
Attribute 12 mm 18 mm 30 mm
Analog Output 010V Sourcing
Load Current 5 mA
Operating Voltage 1830V DC
Repeatability 1%
871C Cable Style
12 mm, 18 mm, and 30 mm Ripple 10%
Slew Speed 1.0 V/ms 0.7 V/ms 0.1 V/ms
Output/ Distance 0.25 mm/V 0.375 mm/V 0.875 mm/V
Linearity Tolerance 6.25%
Temperature Drift 0.3V
Protection Type Transient noise, reverse polarity, short circuit, and overload
Enclosure Type Rating NEMA 1, 2, 3, 4, 12, 13; IP67 (IEC529)
Housing Material Nickel-plated brass barrel, plastic face (PBT)
Status Indicator None
Shock 30 g (1.06 oz), 11 ms
Vibration 55 Hz, 1 mm amplitude, 3 planes
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3

Approximate Dimensions [mm (in.)]

mm (in.)
Thread Size
A B C D
2 m (6.5 ft)
12 mm 12.0 (0.47)
58.0 (2.28)
18 mm 18 (0.71)
A C B
81.0 (3.15) 12 (0.47)
30 mm 30.0 (1.18) 70 (2.75)
D
Wiring Diagrams
12 mm 18 mm 30 mm
+ Brown + Brown + Brown

Analog Analog Analog
Black Black Black
Load 1830V DC Load 1830V DC Load 1830V DC
I - Blue I - Blue I - Blue

Nominal Output
12 mm 18 mm 30 mm
9V 9V 9V
0.25 mm/V 0.375 mm/V 0.875 mm/V

Output
Output
Output
1V 1V 1V
0.5 mm 2.5 mm 1 mm 4 mm 7 mm 14 mm
Distance to Target Distance to Target Distance to Target

871C 2-wire NAMUR Intrinsically Safe, Cable Style Tubular Sensors

Nickel-plated Brass Barrel, Plastic Face
Specifications
Attribute 8 mm, 12 mm, 18 mm, and 30 mm
Output Type NAMUR (conforms to DIN 19 234)
Load Current, Nom. <1 mA (target present), >3 mA (target absent)
Operating Voltage 515V DC (8.2V DC nom., Ri = 1 kohm, DIN 19 234)
Ripple 5%
871C NAMUR Cable Style Repeatability <10%

8 mm, 12 mm, 18 mm, and 30 mm Hysteresis 10% typical
Protection Type Reverse polarity, false pulse, transient noise, short circuit, and overload
FM Approved:
Class I, II, III; Divisions 1, 2; Groups A, B, C, D, E, F, G
Certifications Class I; Zone 0, 1, 2; Groups IIC, IIB, IIA; T6; CSA Certified
Class I, II, III; Divisions 1, 2; Groups A, B, C, D, E, F, G
Class I; Zone 0, 1, 2; Groups IIC, IIB, IIA; CE Marked for all applicable directives
Enclosure Type Rating NEMA 4, IP67 (IEC529)
Housing Material Nickelplated brass barrel, plastic face
Cable: 2 m (6.5 ft) length, 2-conductor #22 AWG PVC
Connection Type
871C NAMUR Micro Quick-disconnect Style Quick-disconnect: 4-pin micro style
8 mm, 12 mm, 18 mm, and 30 mm Status Indicator None
Shock 30 g (1.06 oz), 11 ms
Vibration 55 Hz, 1 mm amplitude, 3 plane
Correction Factors Entity Parameters

Target Correction
Sensor Barrier
Material Factors
Steel 1.0 Vmax 16V Vt
Stainless Steel 0.70.8 Imax 60 mA lt
Brass 0.40.5 Cl 150 nF Ca
Aluminum 0.30.4 Ll 200 H La
Copper 0.20.3
IMPORTANT Operating parameters must be adhered to.


Cable Style
Brown +
To NAMUR
2 m (6.5 ft) Galvanic Isolator
Blue
--
A C B
D
mm (in.)
A B C
Yes
M8 X1 8.0 (0.31)
No 5.0 (0.20)
Yes
M12 X 1 12.0 (0.47) 30.0 (1.18)
No 6.0 (0.24)
Yes
M18 X 1 18.0 (0.71)
No 8.0 (0.31)
Yes
M30 X 1.5 30.0 (1.18) 40.0 (1.57)
No 12.0 (0.47
Micro QD Style Normally Open
PNP (Sourcing)
A
D 2 1 +
3 4
To NAMUR
Galvanic Isolator
C --
B
M12 x 1
mm (in.)
A B C D
Yes 28.0 (1.10)
M8 X1 8.0 (0.31)
No 23.0 (0.91) 5.0 (0.20)
Yes 30.0 (1.18)
M12 X 1 12 (0.47) 50.0 (1.97)
No 24.0 (0.94) 6.0 (0.24)
Yes 30.0 (1.18)
M18 X 1 18.0 (0.71)
No 22.0 (0.87) 8.0 (0.31)
Yes 40.0 (1.57)
M30 X 1.5 30.0 (1.36) 60.0 (2.36)
No 28.0 (1.10) 12.0 (0.47)

871C 3-wire DC Mini Tubular Sensors

Plastic Face/Small Threaded or Smooth Stainless Steel Barrel 3 mm, 4 mm, and 5 mm
Specifications
3 mm Smooth Barrel and 4 mm Smooth Barrel and
Attribute
4 mm Threaded Barrel 5 mm Threaded Barrel
Environmental
Operating Environment NEMA 1, 2, 3, 4, 12, 13 IP67 (IEC 529)
871C NAMUR Cable Style Operating Temperature -25+70 C (-13+158 F)
8 mm, 12 mm, 18 mm, and 30 mm Vibration 55 Hz, 1 mm amplitude, 3 planes
Shock 30 g (1.06 oz), 11 ms
Electrical
Load Current 100 mA <200 mA
Leakage Current 0.1 mA
Voltage Drop 2V
871C NAMUR Micro Quick-disconnect Style
8 mm, 12 mm, 18 mm, and 30 mm Repeatability 5%
Protection Type False pulse, transient noise, reverse polarity, and short circuit
IO-Link (Enabled on Normally Open, PNP Models Only)
Protocol IO-Link V1.0
Interface Type IO-Link
Mode COM 2 (38.4 kBd)
871C NAMUR Micro Quick-disconnect Style Cycle Time 1 10.4 ms, minimum
8 mm, 12 mm, 18 mm, and 30 mm SIO (standard I/O) Supported (pin 4 for either IO-Link or SIO)
Mechanical
Housing Material Stainless steel barrel, polyester face
Status Indicator Yellow: Output energized
Status Indicator (IO-Link Mode) Solid yellow: Sensor in IO-Link mode
Connection Type Pico QD (M8), 2 m (6.6 ft) cable, pico with lead
Correction Factors
871C NAMUR Micro Quick-disconnect Style 3 mm Diameter 4 mm Diameter Smooth or 5 mm Diameter Smooth or
8 mm, 12 mm, 18 mm, and 30 mm Smooth Threaded Threaded
Sensor Type/
Target Material 0.6 mm 1.0 mm
0.8 mm Sr 1.5 mm Sr 1 mm Sr 1.5 mm Sr
Sr Sr
Steel 1 1 1 1 1 1
Copper 0.5 0.45 0.45 0.4 0.45 0.4
Aluminum 0.55 0.5 0.5 0.4 0.5 0.4
Brass 0.65 0.6 0.55 0.5 0.55 0.5
871C NAMUR Micro Quick-disconnect Style Stainless Steel 304 0.8 0.8 0.8 0.75 0.8 0.75
8 mm, 12 mm, 18 mm, and 30 mm
Switching Frequency
Barrel Diameter [mm (in.)] Nominal Sensing Distance [mm (in.)] Switching Frequency [Hz]
0.6 (0.02) 5000
3
1 (0.04) 3000
0.8 (0.03) 5000
4 1 (0.04) 3000
1.5 (0.06) 3000
1 (0.04) 5000
5
1.5 (0.06) 3000


Cable Style Normally Open
NPN (Sinking) PNP (Sourcing)

Status + -- + --
Indicator Status 1030V DC 1030V DC
Indicator Brown + --
Brown
2 m (6.5 ft) + --
B 2 m (6.5 ft) Load Blue Black
C Black
A B Blue
A
[mm (in.)]
Smooth Diameter Thread Size Shielded
A B C
3.0 3.0 (0.12) 22.0 (0.87)
Yes
4.0 4.0 (0.16) 25.0 (0.98)
4.0 M4 X 0.5 4.0 (0.16) 22.0 (0.87) 19.0 (0.75)
Yes
5.0 M5 X 0.5 5.0 (0.20) 25.0 (0.98) 20.0 (0.79)
Pico QD Style Normally Open
Status Status PNP (Sourcing) NPN (Sinking)

Indicator A Indicator A
+ --
4 Load Load 4
1 3 -- + 1 3
C C
+ 1030V DC -- + 1030V DC --
B B
Smooth Threaded
mm (in.)
Smooth Diameter Thread Size Shielded
A B C
4.0 4.0 (0.16) 38.0 (1.50) 19.0 (0.74)
Yes
5.0 M5 X 0.5 5.0 (0.20) 38.0 (1.50) 23.0 (0.90)
Pico with Lead Style Normally Open
Smooth 152 Threaded 152 PNP (Sourcing) NPN (Sinking)

Status (6.0) Status (6.0)
Indicator Indicator + --
4 Load Load 4
1 3 -- + 1 3
B C
A A B
+ 1030V DC -- + 1030V DC --
mm (in.)
Smooth Diameter Shielded
A B C
3.0 3.0 (0.1) 22.0 (0.87)
Yes
4.0 4.0 (0.16) 22.0 (0.87) 19.0 (0.74)

871C 3-wire DC Extended Temperature Tubular Sensors

Specifications
Attribute 12 mm, 18 mm, and 30 mm
Load Current 1200 mA
Leakage Current 10 A
Voltage Drop 2.4V
871C DC Cable Style Repeatability 10%
12 mm, 18 mm, and 30 mm
Protection Type False pulse, transient noise, reverse polarity, short circuit, and overload
Housing Material Nickel-plated brass barrel
Cable: 2 m (6.5 ft) length, 3-conductor PUR
Connection Type Quick-disconnect: 4-pin micro style
Status Indicator Orange: Output Energized
871C DC Micro Quick-disconnect Style
Shock 30 g (1.06 oz), 11 ms
12 mm, 18 mm, and 30 mm
Correction Factors
Steel 1.0
Stainless Steel 0.9
Brass 0.5
Aluminum 0.45
Copper 0.4


+ --
Status 1030V DC
Indicator
Brown + --
Black Load
2 m (6.5 ft)
Blue
C
A B
mm (in.)
A B C D
Yes 40.0 (1.57)
M12 X 1 12.0 (0.47)
No 34.0 (1.34) 6.0 (0.24)
Yes 40.0 (1.57)
M18 X 1 18.0 (0.71) 40.0 (1.57)
No 32.0 (1.26) 8.0 (0.31)
Yes 40.0 (1.57)
M30 X 1.5 30.0 (1.18)
No 28.0 (1.12) 12 (0.47)
A
Status 2 1
D
Indicator 3 4
C
B Load
-- +
M12 x 1
1030V DC
-- +
mm (in.)
A B C D
Yes 40.0 (1.57)
M12 X 1 12.0 (0.47)
No 34.0 (1.34) 6.0 (0.24)
Yes 40.0 (1.57)
M18 X 1 18.0 (0.71) 60.0 (2.36)
No 32.0 (1.26) 8.0 (0.31)
Yes 40.0 (1.57)
M30 X 1.5 30.0 (1.18)
No 28.0 (1.12) 12 (0.47)

871T 3-wire DC Stainless Steel Barrel Tubular Sensors

Specifications
Voltage Drop 1V
871C DC Cable Style
Repeatability 10%
12 mm and 18 mm
Enclosure Type Rating NEMA 1, 2, 3, 4, 12 and 13; IP67 (IEC529)
Housing Material Stainless Steel 303 barrel
Cable: 3 m (10 ft) length, 3-conductor PVC
Connections Quick-disconnect: 4-pin mini style
871C DC Mini Quick-disconnect Style Status Indicator Red: output energized
18 mm
Correction Factors
Steel 1.0
Brass 0.30.5
Aluminum 0.30.4
Copper 0.30.4


Status + -- + --
Indicator 1030V DC 1030V DC
Brown + --
Brown
+ -- Blue Black Load
3 m (9.8 ft) Load Black
Blue
C B
A
mm (in.)
A B (Max) C (Min) D (Max)
Yes 53.8 (2.12) 0.8 (0.03)
M12 X 1 12.0 (0.47) 80.0 (23.15)
No 46.5 (1.83) 8.1 (0.32)
Yes 81.5 (3.21) 55.6 (2.19) 0.8 (0.03)
M18 X 1 18.0 (0.71)
No 81.3 (3.20) 43.7 (1.72) 12.3 (0.48)
Mini QD Style Normally Open

NPN (Sinking)
A
-- +
Status 1 4 Load Load 1 4
Indicator D + -- 2 3
2 3
-- 1030V DC + -- 1030V DC +
C
7/8-16-UN-2A B
mm (in.)
Yes 51.9 (2.04) 0.8 (0.03)
M18 X 1 18.0 (0.71) 96.9 (3.81)
No 40.4 (1.59) 12.3 (0.48)

871T 2-wire AC Stainless Steel Barrel Tubular Sensors

Specifications
Operating Voltage 20132V AC
871T AC Cable Style
12 mm and 18 mm Voltage Drop 6.5V AC at 500 mA, 10V AC at 20 mA (RMS)
Repeatability 10%
Protection Type False pulse, transient noise
Housing Material Stainless steel 303 barrel
Cable: 3 m (10 ft) length, 12 mm
871T AC Mini Quick Disconnect Style 2 conductor PVC, 18 mm
18 mm Connection Type
3 conductor PVC
Quick-disconnect: 3-pin mini style
Status Indicator Red: Output Energized
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.30.5
Aluminum 0.30.4
Copper 0.30.4


Status Brown Brown
Indicator
Blue Load Blue Load
3 m (9.8 ft) Green Green
C B Note: No green wire on 12 mm.

A
Attach housing to ground.
D
mm (in.)
Yes 53.8 (2.12) 0.8 (0.03)
M12 X 1 12.0 (0.47) 80.0 (23.15)
No 46.5 (1.83) 8.1 (0.32)
Yes 81.5 (3.21) 55.6 (2.19) 0.8 (0.03)
M18 X 1 18.0 (0.71)
No 81.3 (3.20) 43.7 (1.72) 12.3 (0.48)
Ground
A
Status
Indicator D 1
2 3
C
Load
7/8-16-UN-2A B
Note: Load can be switched to pin 3.
mm (in.)
Yes 51.9 (2.04) 0.8 (0.03)
M18 X 1 18.0 (0.71) 96.9 (3.81)
No 40.4 (1.59) 12.3 (0.48)

871T 4-wire AC Ferrous Selective

Stainless Steel Face/Threaded Stainless Steel Barrel
Specifications
Attribute 18 mm
Load Current 500 mA
Inrush Current (one Cycle) 5 A
Supply Current (minimum) 5 mA
871T AC Cable Style Leakage Current 1.7 mA
18 mm Operating Voltage 20132V AC
N.O. output: 6.5V AC at 500 mA, 10V AC at 20 mA (RMS)
Voltage Drop
N.C. output: 1.7V AC at 500mA (RMS)
Isolation Voltage 800V AC (output to output); 1500V AC (output to housing)
Repeatability 10%
871T AC Mini Quick-disconnect Style Certifications CE Marked for all applicable directives
18 mm Enclosure Type Rating NEMA 3, 4, 12 and 13; IP67 (IEC529)
Housing Material Stainless steel face and barrel
Connections Cable: 3.6 m (12 ft) length, 5-conductor PVC

Quick-disconnect: 5-pin mini style
Red: Output energized
Status Indicator
Green: Power
Operating Temperature 070 C (32158 F)
Correction Factors
Steel 1.0
(1)
Brass 0.0
Aluminum 0.0
Copper 0.0
(1) Stainless steel 10% contains carbon.


Cable Style Complementary Normally Open or Normally Closed
White
Status A N.O. Output
Indicators D
Black
Load
7/8-16UN-2A Orange Load
N.C. Output
C Green
Red
B
Note:
1. N.O. output must be wired for operation. N.C. output is optional.
2. N.O. load can be switched to white wire.
3.6 m 3. N.C. load can be switched to red wire.
(12 ft)
mm (in.)
Thread Size
M18 X 1 18.0 (0.71) 101.6 (4.00) 50.8 (2.00) 20.3 (0.80)
N.O. Output
2 Status A 1 5 Load
Indicators Load 2
3
4
N.C. Output
D
C
B
7/8-16-UN-2A Note:
1. N.O. output must be wired for operation. N.C. output is optional.
2. N.O. load can be switched to pin 1.
3. N.C. load can be switched to pin 4.
mm (in.)
Thread Size
M18 X 1 18.0 (0.71) 101.6 (4.00) 50.8 (2.00) 20.3 (0.80)

871TM 3-wire DC Short Barrel Tubular Sensors

Specifications
Load Current 200 mA
Capacitive Load 1 F
Voltage Drop 1V DC at 200 mA
871TM DC Cable Style
12 mm, 18 mm, and 30 mm Repeatability 10% at constant temperature
False pulse, transient noise, reverse polarity, short circuit (trigger at 340 mA
Protection Type typical), overload
NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13 IP67 (IEC529) all models; 1200 psi (8270 kPa)
Enclosure Type Rating washdown; ToughLink and micro connector versions are also rated IP69K
(IEC529)
871TM DC Mini Quick Disconnect Style Cable: 2 m (6.5 ft) length, A2 - 3-conductor PVC,
12 mm, 18 mm, and 30 mm Connection Type C2 - 3-conductor #22 AWG-ToughLink, H2 - 3-conductor #18 AWG ToughLink
Quick-disconnect: 4-pin mini style, 4-pin micro style
Indicator Status Indicators Red: Output Energized

Green: Power/Short Circuit (flashing)18 mm models only
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
871TM DC Micro Quick Disconnect Style
12 mm, 18 mm, and 30 mm Stainless Steel 0.91.0
Brass 0.30.5
Aluminum 0.10.4
Aluminum (0.02 Thick) 0.91.1
Copper 0.10.2


Status
Indicator + -- + -- + -- + --
1030V DC 1030V DC 1030V DC 1030V DC
2 m (6.5 ft) Brown
Brown Brown + --
Brown + -- Load
+
Load
-- Blue Black Load
A C B Load Black Black
Blue Blue
D
mm (in.)
A B C D
Yes 26.4 (1.04) 2.5 (0.10)
M12 X 1 12.0 (0.47) 49.8 (1.96)
No 19.5 (0.77) 9.4 (0.37)
Yes 2.5 (0.10)
M18 X 1 18.0 (0.71) 55.4 (2.18) 41.7 (1.64)
No 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 57.9 (2.28)
No 39.4 (1.55) 18.0 (0.71)
Mini QD Style Normally Open Normally Closed
NPN (Sinking)
A
Status
Indicator -- +
D Load Load
1 4 1 4
2 3
+ -- 2 3
C
B -- 1030V DC + -- 1030V DC +
7/8-16-UN-2A
mm (in.)
A B C D
Yes 25.4 (1.00) 2.5 (0.10)
M12 X 1 12.0 (0.47) 63.5 (2.50)
No 18.5 (0.73) 9.4 (0.37)
Yes 35.1 (1.38) 2.5 (0.10)
M18 X 1 18.0 (0.71) 56.1 (2.21)
No 29.2 (1.15) 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 68.1 (2.68)
No 39.4 (1.55) 18.0 (0.71)

8
A NPN (Sinking)
Status D 2 1 2 1
Indicator 3 4
Load 3 4
-- +
C -- +
Load
B
-- 1030V DC + -- 1030V DC +
M12 x 1
mm (in.)
A B C D
Yes 26.4 (1.04) 2.5 (0.10)
M12 X 1 12.0 (0.47) 61.5 (2.40)
No 28.0 (1.10) 9.4 (0.37)
Yes 2.5 (0.10)
M18 X 1 18.0 (0.71) 65.1 (2.56) 41.7 (1.64)
No 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 66.3 (2.61)
No 39.4 (1.55) 18.0 (0.71)

871TM 3-wire DC Weld-field Immune Tubular Sensors

Specifications
Load Current 200 mA
Repeatability 5% at constant temperature, maximum sensing range
871TM DC Pico Quick-disconnection Style
8 mm
Protection Type False pulse, transient noise, reverse polarity, short circuit (trigger at 340 mA typical),
overload
Certifications c-UL-us Listed and CE Marked for all applicable directives
Enclosure Type Rating 8/12/18 mm: IP68/IP69K
Housing Material Stainless steel face and barrel, resistant to weld splatter
Connection Type Quick-disconnect: 4-pin micro style, 3-pin pico style
Indicator Status Indicators Yellow: Output energized/360 visibility flashing status indicator indicates target
that is located between 80100% of rated sensing distance
871TM DC Micro Quick Disconnect Style
12 mm
Shock 30 g (1.06 oz), 11 ms
Weld-Field Immunity 40 mT
Correction Factors
Barrel Size and Sensing Range
Target Material M8 M12 M18
871TM DC Micro 3 mm 6 mm 10 mm
18 mm
Steel 1.00
Copper1 1.00 0.85 1.15
Aluminum 1.00 1.00 1.40
Brass 1.30 1.30 1.50
Stainless Steel1 mm/2 mm 0.4/0.70 0.5/0.90 0.1/0.6


A 2 1
3 4
4 Status
Indicators D Load
-- +
1030V DC
-- +
C
B
M12 x 1
mm (in.)
A B C D
M12 X 1 Yes 12.0 (0.47) 60 (2.36) 41 (1.61)
M18 X 1 Yes 18.0 (0.71) 63.5 (2.5) 42.5 (1.67)
A +
4 Status
Indicators 4 Load
D 1 3 --
C + 1030V DC --
mm (in.)
A B C D
M8 X 1 Yes 8.0 (0.31) 60 (2.35) 45.5 (1.79)

871TM 3-wire DC Long-range Sensing Tubular Sensors

Specifications
Attribute 8 mm, 12 mm, 18 mm, and 30 mm
Load Current 200 mA
Capacitive Load 1 mF
871TM Pico Quick-disconnection Style
8 mm
Repeatability 5% at constant temperature
False pulse, transient noise, reverse polarity, short circuit (trigger at 340mA
871TM DC Micro Quick-disconnect Style 12/18/30 mm: IP68/IP69K
12 mm Enclosure Type Rating 8 mm quick-disconnect models: IP67
8 mm cable models: IP68
Cable: 2 m (6.5 ft) length
Connection Type
Quick-disconnect: 4-pin micro style, 3-pin pico style
Yellow: Output energized/360 status indicator visibility, flashing status indicator
Status Indicators
indicates target that is located between 80100% of rated sensing distance
871TM DC Cable Style Operating Temperature -25+70 C (-13+158 F)

18 mm Shock 30 g (1.06 oz), 11 ms
IO-Link (enabled on normally open, PNP models only)
Protocol IO-Link V1.0
Interface-type IO-Link
Mode COM2 (38.4 kBd)
Cycle Time 8 ms minimum
SIO (Standard I/O) Supported (pin 4 for either IO-Link or SIO)
Switching Frequency
871TM DC Micro Quick-disconnect Style
30 mm Barrel Diameter [mm] Switching Frequency [Hz]
8 700
12 400
18 200
30 80

Correction Factors
Instructions for unshielded sensor:
1. To determine the appropriate correction factor, only use Table 1.

2. To determine derated sensing distance (if applicable), multiply the sensor type with the target material by the sensing range.
Instructions for shielded sensor:
1. To determine the appropriate correction factor, use Table 1 and Table 2.

2. In Table 1, determine the appropriate correction factor based on the type and the target material.
3. In Table 2, multiply the result from Table 1 by the material the sensor is mounted in. The result is the final correction factor.
Table 1 - Sensor Type and Target Material Correction Factor

Sensor Type/ Target Material 8 mm Diameter 12 mm Diameter 18 mm Diameter 30 mm Diameter
(No Surrounding Metal) Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded
Steel 1 1 1 1 1 1 1 1
Copper 0.90 085 0.85 0.80 0.80 0.90 0.90 0.90
Aluminum 1 1 1 1 1 1 1 1
Brass 1.35 1.4 1.3 1.4 1.2 1.35 1.3 1.2
Stainless Steel 0.3/0.6 0.3/0.9 0.5/0.9 NA/0.65 0.5/0.9 0.2/0.7 0.35/0.7 NA/0.25
Table 2 - Surrounding Material

8 mm Dia. 12 mm Dia. 18 mm Dia. 30 mm Dia.
Surrounding Material Type
Shielded
Steel 1 0.7 0.75 0.9
Aluminum 0.9 1.15 0.9 0.7
Brass 0.9 1.05 0.75 0.6
Stainless Steel 1 0.8 0.8 1.3
The following table indicates the protrusion distance from the mounting device for the unshielded sensor face.
8 mm Dia. 12 mm Dia. 18 mm Dia. 30 mm Dia.
Surrounding Material Type
Unshielded
Steel 15 mm 22 mm 36 mm 18 mm
Aluminum 9 mm 13 mm 22 mm 34 mm
Brass 10 mm 15 mm 22 mm 34 mm
Stainless Steel 14 mm 21 mm 43 mm 18 mm


Status
Indicator + -- + -- + -- + --
1030V DC 1030V DC 1030V DC 1030V DC
Brown Brown + --
2 m (6.5 ft) Brown + -- Brown
Load
Load Black Load
Black
Blue Blue
C
A B
mm (in.)
A B C D
Yes 45 (1.76)
M8 X 1 8.0 (0.31) 45 (1.76)
No 41 (1.61) 4 (0.16)
Yes 50. (1.96)
M12 X 1 12.0 (0.47) 61.5 (2.40)
No 45 (1.77) 5 (0.19)
Yes 50 (1.96)
M18 X 1 18.0 (0.71) 65.1 (2.56)
No 43 (1.69) 7.0 (0.27)
Yes 50.0 (1.96)
M30 X 1.5 30.0 (1.18) 66.3 (2.61)
No 40.0 (1.57) 10.0 (0.39)
Micro Style Normally Open Normally Closed
NPN (Sinking) NPN (Sinking) PNP (Sourcing)

A -- +
Load Load
2 1
2 Status D 3 4
Load 2 1 + --
Indicators -- + 2 1
3 4 3 4
C -- 1030V DC +
B 1030V DC 1030V DC
-- + -- +
M12 x 1 2 1
3 4
-- +
Load
-- 1030V DC +
mm (in.)
A B C D
Yes 46 (1.81)
M8 X 1 8.0 (0.31) 66 (2.59)
No 42 (1.65) 4 (0.16)
Yes 41. (1.61)
M12 X 1 12.0 (0.47) 60 (2.26)
No 36 (1.42) 5 (0.19)
Yes 42.5 (1.67)
M18 X 1 18.0 (0.71) 63.5 (2.5)
No 35.5 (1.40) 7.0 (0.27)
Yes 42.5 (1.67)
M30 X 1.5 30.0 (1.18) 66.3 (2.61)
No 32.5 (1.28) 10.0 (0.39)


Pico Style Normally Open Normally Closed
--
+
A Load 4 Load
4 Status 4
Indicators + 1 3 1 3 --
D
+ 1030V DC -- + 1030V DC --
mm (in.)
A B (max.) C (min.) D (max.)
Yes 46 (1.81)
M8 X 1 8.0 (0.31) 66 (2.59)
No 42 (1.65) 4 (0.16)

871TM 3-wire DC Ferrous or Nonferrous Selective Tubular Sensors

Specifications
Load Current 200 mA
Capacitive Load 1 F
871TM DC Micro Quick-disconnection Style
False pulse, transient noise, reverse polarity, short circuit (trigger at 340mA
NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13; IP67 (IEC529) all models; 1200 psi (8270 kPa)
Enclosure Type Rating washdown; ToughLink and micro connector versions are also rated IP69K (IEC529)
871TM DC ToughLink Cable Style
12 mm, 18 mm, and 30 mm Housing Material Stainless steel face and barrel
Cable: 2 m (6.5 ft) length, A2 - 3-conductor PVC, C2 3-conductor #22 AWG
Connection Type ToughLink, H2 - 3-conductor #18 AWG ToughLink;
Indicator Status Indicators
Green: Power/short circuit (flashing)18 mm models only
Shock 30 g (1.05 oz), 11 ms
871TM DC Mini Quick-disconnect Style Vibration 55 Hz, 1 mm amplitude, 3 planes
12 mm, 18 mm, and 30 mm
Correction Factors
Target Material Ferrous Selective Nonferrous Selective
Steel 1.0 0.0
Stainless Steel 01.0 (1) 01.0 (1)
Brass 0.0 1.0
871TM DC Micro Cable Style
12 mm, 18 mm, and 30 mm Aluminum 0.0 1.0
Aluminum (>0.003 thick) 0.0 1.0
Copper 0.0 1.0
(1) Variations due to differences in alloy composition.


2 Status
Indicators + -- + -- + -- + --
2 m (6.5 ft) 1030V DC 1030V DC 1030V DC 1030V DC
Brown Brown
Brown + -- Brown + --
+ -- Black Load Load
Blue + -- Blue Black Load
Load Black Load
A C B Black
Blue Blue
D
Status Indicators available on 18 mm models only
mm (in.)
Thread Size Shielded Target Type
A B C D
M12 X 1 Ferrous 12.0 (0.47) 51.0 (2.01) 27.5 (1.08)
Ferrous 76.8 (3.02) 65.0 (2.56)
M18 X 1 Yes 18.0 (0.71)
Nonferrous 74.7 (2.94) 60.0 (2.36) 2.5 (0.10)
M30 X 1.5 Nonferrous 30.0 (1.18) 77.5 (3.05) 63.0 (2.48) 2.5 (0.10)
Mini QD Style Normally Open Normally Closed

NPN (Sinking)
2 Status A
Indicators -- +
Load Load
D 1 4
+ --
1 4
2 3 2 3
C -- 1030V DC + -- 1030V DC +
B
7/8-16-UN-2A
Status Indicators available on 18 mm models only
mm (in.)
A B C D
M12 X 1 Ferrous 12.0 (0.47) 61.3 (2.45) 30.4 (1.20)
Ferrous 78.5 (3.14) 60.0 (2.36)
M18 X 1 Yes 18.0 (0.71)
Nonferrous 76.6 (3.02) 54.9 (2.16) 2.5 (0.10)
M30 X 1.5 Nonferrous 30.0 (1.18) 86.0 (3.39) 63.5 (2.50) 2.5 (0.10)
A
2 Status NPN (Sinking)
Indicator D 2 1
2 1
3 4
3 4
Load
-- + -- +
C Load
-- 1030V DC +
B -- 1030V DC +
M12x1
Status Indicators available on 18 mm models only.

mm (in.)
A B C D
M12 X 1 Ferrous 12.0 (0.47) 62.3 (2.45) 30.4 (1.20) 0.9 (0.04)
Ferrous 85.0 (3.35) 65.5 (2.58) 2.0 (0.08)
M18 X 1 Yes 18.0 (0.71)
Nonferrous 84.3(3.32) 60.0 (2.36) 2.5 (0.10)
M30 X 1.5 Nonferrous 30.0 (1.18) 85.5 (3.37) 63.0 (2.48) 2.5 (0.10)

871TM 2-wire DC Short Barrel Tubular Sensors

Specifications
Load Current 25 mA
Load Current, Minimum 2 mA
871TM DC Cable Style Operating Voltage 1030V DC

12 mm, 18 mm, and 30 mm Voltage Drop 8V
Repeatability 10% typical
Protection Type False pulse, transient noise, reverse polarity, short circuit, overload
Enclosure Type Rating NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13; IP67 (IEC 529) all models; 1200 psi (8270 kPa)
washdown; ToughLink and micro connector versions are also rated IP69K (IEC 529)
Cable: 2 m (6.5 ft) length, A2 - 2-conductor PVC, C2 - 2-conductor #22 AWG
Connection Type ToughLink, H2 - 2-conductor #18 AWG ToughLink
871TM DC Mini Quick-disconnect Style
12 mm, 18 mm, and 30 mm Indicator Status Indicators Red: Output Energized
Shock 30 g (1.06 oz), 11 ms
Correction Factors
871TM DC Micro Target Material Correction Factors
12 mm, 18 mm, and 30 mm
Steel 1.0
Brass 0.30.5
Aluminum 0.10.4
Copper 0.10.2

Approximate Dimensions [mm (in.)] Typical Wiring Diagrams

Status + -- + --
Indicator
10 30V DC 1030V DC
2 m (6.5 ft)
+ -- + --
Load Load
A C B Brown Blue Brown Blue
D
mm (in.)
A B C D
Yes 26.4 (0.10) 2.5 (0.10)
M12 X 1 12.0 (0.47) 49.8 (1.96)
No 19.5 (0.77) 9.4 (0.37)
Yes 2.5 (0.10)
M18 X 1 18.0 (0.71) 55.4 (2.18) 41.7 (1.64)
No 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 57.9 (2.28)
No 39.4 (1.55) 18.0 (0.71)
A
Status 1 4
Indicator D -- +
2 3 Load
C -- +
B 1030V DC
7/8-16-UN-2A Note: Load can be switched to pin2
mm (in.)
A B C D
Yes 25.4 (1.00) 2.5 (0.10)
M12 X 1 12.0 (0.47) 63.5 (2.50)
No 18.5 (0.73) 9.4 (0.37)
Yes 35.1 (1.38) 2.5 (0.10)
M18 X 1 18.0 (0.71) 56.1 (2.21)
No 29.2 (1.15) 14.5 (0.57)
Yes 49.1 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 68.1 (2.68)
No 39.4 (1.55) 18.0 (0.71)
A
+ --
2 1
3 4 Load
Status D
Indicator + --
1030V DC
C
B
M12 x 1 Note: Load can be switched to pin3
mm (in.)
A B C D
Yes 26.4 (1.04) 2.5 (0.10)
M12 X 1 12.0 (0.47) 61.0 (2.40)
No 19.6 (0.77) 9.4 (0.37)
Yes 2.5 (0.10)
M18 X 1 18.0 (0.71) 65.0 (2.56) 41.7 (1.64)
No 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 66.3 (2.61)
No 39.4 (1.55) 18.0 (0.71)

871TM 2-wire AC/DC All Stainless Steel Tubular Sensors

Specifications
Operating Voltage 20250V AC/DC
Voltage Drop 10V @ 5200 mA 10V @ 5250 mA
871TM AC/DC Cable Style
False pulse, transient noise, short circuit False pulse, transient noise, short circuit
Protection Type (trigger @ 5 A typical), and overload (trigger @ 8 A typical), and overload
(trigger @ 260 mA typical) (trigger @ 320 mA typical)
UL Listed, CSA Certified, and CE Marked for all applicable directives, CCC Certified
Certifications (select models)
NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13; IP67 (IEC 529) all models; 1200 psi (8270 kPa)
Enclosure Type Rating washdown; ToughLink and micro connector versions are also rated IP69K
871TM AC/DC Mini (IEC 529)
Quick-disconnect Style
12 mm, 18 mm, and 30 mm Housing Material Stainless steel face and barrel
Cable: 2 m (6.5 ft) length; A22-conductor #22 AWG PVC, C22-conductor
Connection Type #22 AWG ToughLink, H23-conductor #18 AWG ToughLink
Quick-disconnect: 3-pin mini style, 3-pin micro style, 4-pin EAC micro style
Indicator Status Indicators Green: Power
Short circuit: Red and green flashing
871TM AC/DC Micro Quick-disconnect Style Shock 30 g (1.06 oz), 11 ms
12 mm, 18 mm, and 30 mm
Correction Factors
Steel 1.0
871TM AC/DC EAC Micro Stainless Steel 0.91.0
Quick-disconnect Style Brass 0.30.5
12 mm
Aluminum 0.10.4
Copper 0.10.2
871TM AC/DC
ToughLink Cable Style
12 mm, 18 mm, and 20 mm


EAC Micro QD Style Normally Open
A
2 Status 2 1
Indicators
3 4
D
Load
C Note: No ground pin. Attach housing to ground.
B
M12 x 1
mm (in.)
A B C D
M12 X 1 No 12.0 (0.47) 83.0 (3.27) 31.7 (1.25) 9.4 (0.37)
2 Status
Indicators Brown Brown
2 m (6.5 ft) Blue Blue
Load Load
Green Green
A C B
D Note: No green wire on 12 mm and on sensors with PVC cable (-A2). Attach housing to ground.
mm (in.)
A B C D
Yes 38.4 (1.51) 2.5 (0.10)
M12 X 1 12.0 (0.47) 72.1 (2.84)
No 31.5 (1.24) 9.4 (0.37)
Yes 60.0 (2.35) 2.5 (0.10)
M18 X 1 18.0 (0.71) 74.7 (2.94)
No 48.2 (190) 14.4 (0.56)
Yes 61.3 (2.41) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 77.2 (3.04)
No 46.1 (1.81) 17.9 (0.70)


2 Status A
Ground
Indicators
D
1
2 3
C
B
7/8-16-UN-2A Load
Note: No ground pin on 12 mm. Attach housing to ground.
Note: Load can be switched to pin3
mm (in.)
A B C D
Yes 37.8 (1.49) 2.5 (0.10)
M12 X 1 12.0 (0.47) 85.6 (3.37)
No 31.7 (1.25) 9.4 (0.37)
Yes 54.9 (2.16) 2.5 (0.10)
M18 X 1 18.0 (0.71) 56.1 (2.21)
No 43.1 (1.70) 14.4 (0.56)
Yes 61.3 (2.41) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 68.1 (2.68)
No 46.1 (1.81) 17.9 (0.70)
A Ground
1
2 Status D
Indicators 2 3 Load
C
B
M12 x 1 Note: No ground pin on 12 mm. Attach housing to ground.
Note: Load can be switched to pin3
mm (in.)
A B C D
Yes 38.4 (1.51) 2.5 (0.10)
M12 X 1 12.0 (0.47) 83.4 (3.28)
No 31.5 (1.24) 9.4 (0.37)
Yes 60.0 (2.36) 2.5 (0.10)
M18 X 1 18.0 (0.71) 84.3 (3.32)
No 48.2 (1.90) 14.4 (0.56)
Yes 61.3 (2.41) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 85.7 (3.37)
No 46.1 (1.81) 17.9 (0.70)

871TM 2-wire AC/DC PLC Interfacer

Stainless Steel Face/Threaded Short Stainless Steel Barrel
Specifications
Load Current 225 mA
0.9 mA at 24V DC
Leakage Current 1.7 mA at 20120V AC/DC
871TM AC/DC Cable Style 2.5 mA at 121250V AC/DC
12 mm, 18 mm, and 30 mm Operating Voltage 20250V AC/DC (standard models)20132V AC/DC (high temperature models)
8V at 25 mA DC
Voltage Drop
10V at 25 mA AC
Protection Type False pulse, transient noise, radio frequency (10V per meter, frequency range
201000 MHz) (1)
871TM AC/DC Mini Quick-disconnect Style UL Listed, CSA Certified, and CE Marked for all applicable directives CCC Certified
Certifications
12 mm, 18 mm, and 30 mm (select models)
Enclosure Type Rating washdown; ToughLink and micro connector versions are also rated IP69K (IEC529)
Cable: 2 m (6.5 ft) length, A2 - 2-conductor #22 AWG PVC, C2 - 2-conductor #22
Connection Type AWG ToughLink, H2 - 2-conductor #18 AWG ToughLink
Quick-disconnect: 3-pin mini style, 3-pin micro style, 4-pin EAC micro style
871TM AC/DC Micro Quick-disconnect Style
12 mm, 18 mm, and 30 mm Indicator Status Indicators Red: Output Energized
Operating Temperature -25+70 C (-13+158 F) (standard models)

0100 (32212 ) (high temperature models)
30 g (1.06 oz), 11 ms (standard models)
Shock
5 g (0.18 oz), 11 ms (high temperature models)
Vibration 55 Hz, 1 mm amplitude, 3 planes (standard models)30120 Hz, 1 mm amplitude,

871TM AC/DC EAC Micro Quick-disconnect Style 3 planes (high temperature models)
12 mm
Correction Factors
Steel 1.0
871TM AC/DC ToughLink Cable Style Stainless Steel 0.81.0
12 mm, 18 mm, and 20 mm Brass 0.40.7
Aluminum 0.40.7
Copper 0.10.2
(1) Radio frequency protection is not available on high temperature models.


EAC Micro QD Style Normally Open
A
Status 2 1
Indicator 3 4
D
C Load
B Note: No ground pin. Attach housing to ground.
M12 x 1 Note: Load can be switched to pin 2.
mm (in.)
A B C D
M12 X 1 No 12.0 (0.47) 61.0 (2.40) 26.4 (1.04) 2.5 (0.10)

Status Brown
Indicator
Blue Load
2 m (6.5 ft)
A C B Note: Attach housing to ground.

D Note: Load can be switched to brown wire.
mm (in.)
A B C D
Yes 26.4 (1.04) 2.5 (0.10)
M12 X 1 12.0 (0.47) 49.8 (1.96)
No 19.5 (0.77) 9.4 (0.37)
Yes 2.5 (0.10)
M18 X 1 18.0 (0.71) 55.4 (2.18) 41.7 (1.64)
No 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 57.9 (2.28)
No 39.4 (1.55) 18.0 (0.71)


A
Status 1
Indicator D 2 3
C
B Load
7/8-16-UN-2A Note: Attach housing to ground.
Note: Load can be switched to pin3.
mm (in.)
A B C D
Yes 12.0 (0.47) 25.4 (1.00) 2.5 (0.10)
M12 X 1 63.5 (2.50)
No 18.5 (0.73) 9.4 (0.37)
Yes 35.1 (1.38) 2.5 (0.10)
M18 X 1 18.0 (0.71) 56.1 (2.21)
No 29.2 (1.15) 14.5 (0.57)
Yes 49.1 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 68.1 (2.68)
No 39.4 (1.55) 18.0 (0.71)
A Ground
1
Status D 2 3 Load
Indicator
C
B
M12 x 1 Note: Attach housing to ground.
Note: Load can be switched to pin2.
mm (in.)
A B C D
Yes 26.4 (1.04) 2.5 (0.10)
M12 X 1 12.0 (0.47) 83.4 (3.28)
No 19.6 (0.77) 9.4 (0.37)
Yes 2.5 (0.10)
M18 X 1 18.0 (0.71) 84.3 (3.32) 41.7 (1.64)
No 14.5 (0.57)
Yes 41.9 (1.65) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 85.7 (3.37)
No 39.4 (1.55) 18.0 (0.71)

871TM 2-wire DC Intrinsically Safe

Stainless Steel Face and Barrel
Specifications
Outputs Normally open
Load Current, Max. 25 mA
Load Current, Min. 2 mA
Leakage Current t1.0 mA
871TM Intrinsically Safe
Cable Style Operating Voltage 1031.5V DC
Voltage Drop 8V DC
FM Approved and CSA Certified for:
Class I, II, III; Divisions 1, 2; Groups A, B, C, D, E, F, G when used with an approved
871TM Intrinsically Safe Certifications
intrinsic safety barrier
Micro Quick-disconnect Style Class I, II, III; Division 2; Groups A, B, C, D, E, F, G without intrinsic safety barrier UL
Listed for use in non-hazardous locations (See control drawing 75001-437 for
12 mm, 18 mm, and 30 mm approval details and wiring diagrams)
Enclosure Type Rating washdown; stainless steel face and barrel; ToughLink and micro connector versions
are also rated IP69K (IEC 529)
Cable: 2 m (6.5 ft) length, A2 - 2 conductor #22 AWG PVC, C2 - 2 conductor #22
Connection Type AWG ToughLink, H2 - 2 conductor #18 AWG ToughLink
Quick Disconnect: 4-pin micro style
Indicator Status Indicators Red: Output energized
871TM Intrinsically Safe Operating Temperature -25+70 C (-13+158 F)
ToughLink Cable Style
Shock 30 g (1.06 oz), 11 ms
12 mm
Correction Factors Entity Parameters

Target Material Correction Factor Sensor Barrier
Steel 1.0 VMAX 31.5V Vt
Stainless Steel 0.91.0 IMAX 130 mA It
Brass 0.30.5 PMAX 1.25 W Pt
Aluminum 0.10.4 Ci 0 f Ca
Aluminum (0.02 Thick) 0.91.1 Li 0 mH Lta
Copper 0.10.2
IMPORTANT Operating parameters must be adhered to.


Cable Style
Status
Indicator
2 m (6.5 ft)
A C B
D
mm (in.)
A B C D
Yes 36.1 (1.42) 2.5 (0.10)
M12 X 1 12.0 (0.47) 72.1 (2.84)
No 29.2 (1.15) 9.4 (0.37)
Yes 56.2 (1.22) 2.5 (0.10)
M18 X 1 18.0 (0.71) 75.7 (2.94)
No 44.5 (1.75) 14.4 (0.56)
Yes 58.4 (2.30) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 77.2 (3.04)
No 43.2 (1.70) 17.9 (0.70)
Micro QD Style
A
Status
Indicator
C
B
M12 x 1
mm (in.)
A B C D
Yes 36.1 (1.42) 2.5 (0.10)
M12 X 1 12.0 (0.47) 83.3 (3.28)
No 29.2 (1.15) 9.4 (0.37)
Yes 56.3 (22.2) 2.5 (0.10)
M18 X 1 18.0 (0.71) 84.3 (3.32)
No 44.5 (1.75) 14.4 (0.56)
Yes 58.4 (2.30) 2.5 (0.10)
M30 X 1.5 30.0 (1.18) 86.1 (3.39)
No 43.2 (1.70) 17.9 (0.70)

Division 1 Installation Wiring Diagrams

Allen-Bradley Catalog Number: 871TM-DRaNEb-c
where:
a = nominal operating distance [2, 5, or 10 mm (shielded); 4, 8, or 15 mm (unshielded)]
b = 12, 18, or 30 mm (housing diameter)
c = A2 (2 meter PVC cable), D4 (4-pin micro connector), C2 (2 meter ToughLink cable - 12 mm),
or H2 (2 meter ToughLink cable - 18 and 30 mm)
Nonhazardous Location
Hazardous Location
(recommended AB barriers can be installed in Div 2 area)
Class I, II, III, Division 1, Group A, B, C, D, E, F, G
Class I, II, III, Division 2, Group A, B, C, D, F, G
Power Supply &
Inductive Proximity Zener Diode Barriers
Load Circuits
871TM-DR Series
Entity Parameters: Entity Parameters:
Vmax = 31.5V Vt or Voc 31.5V
Imax = 130 mA Ci = 0F It or lsc 130 mA Ca Ccable
Pmax = 1.25W Li = 0mH Pt 1.25W La Lcable
A-B #937ZH-DPDP-2
Cable
24V DC Nom.
(Pin3) 26V DC max.
Brown Power Supply (+)
1 8
x3 Sinking PLC
2 7 Input
3 x3 6
Blue (Pin4) 4 x3 Supply and
5
Signal Return
( -- )
Supply Return
Sourcing Output Wiring Earth Ground

(less than 1 ohm)
871TM-DR Series
Entity Parameters: Entity Parameters:
Vmax = 31.5V Vt or Voc 31.5V
Imax = 130 mA Ci = 0F It or lsc 130 mA Ca Ccable
Pmax = 1.25W Li = 0mH Pt 1.25W La Lcable
A-B #937ZH-DPBN-1
Cable
(Pin3) Sourcing PLC

Brown Input 24V DC Nom.
Power 26V DC max.
1 8 Supply (+)
x3
Blue (Pin4) Supply and Signal Return
2 7
( -- )
Sinking Output Wiring

Earth Ground
(less than 1 ohm)

Division 1 Installation Wiring Diagrams (Continued)

Hazardous Location Nonhazardous Location
(recommended AB barriers can be installed in Div 2 area)
Class I, II, III, Division 1, Group A, B, C, D, E, F, G
Class I, II, III, Division 2, Group A, B, C, D, F, G
Power Supply &
Inductive Proximity Zener Diode Barriers
Load Circuits
871TM-DR Series Entity Parameters:

Entity Parameters: Vt or Voc 31.5V
Vmax = 31.5V It or lsc 130 mA Ca Ccable
Imax = 130 mA Ci = 0F Pt 1.25W La Lcable
Pmax = 1.25W Li = 0mH A-B #937ZH-DPBN-2
Cable Sourcing PLC 24V DC Nom.
Input Power 26V DC max.
(Pin3) (+)
Brown Supply
1 8
2 x3 7 Sourcing PLC
Input
(Pin4) 3 x3 6
Blue
4 5
Supply Return ( -- )
Earth Ground
(less than 1 ohm)
Cable
(Pin3)
Brown
(Pin4)
Blue
Dual Sinking Output Wiring

Factory Mutual Installation Notes
1 Installation must be in accordance with the National Electrical Code (NFPA 70, Article 504), ANSI/ISA-RP12.6, and the manufacturers instructions.
2 If the electrical parameters of the cable used are unknown, the following values may be used: Capacitance 60 pF/ft.; Inductance 0.20 H/ft.
3 The wiring between each Inductive Proximity Sensor and its corresponding channel of the dual-channel barrier is a separate intrinsically safe circuit. Each of the two separate intrinsically safe
circuits shall be in separate cables or shall be separated from each other as specified in NEC 504-30. The supply return conductors may be connected at the barriers grounding terminal.
4 The Barrier bus must be insulated from other grounded metal. Use Power Rail 937A-PR08, 937A-PR20 and Power Feed Module 937A-PSFD.
5 The maximum nonhazardous location voltage must not exceed 250V AC or DC.
6 Barriers are not required for Division 2 (31.5V DC max.). Division 2 applications must be installed in accordance with the NEC.
7 WARNING: Substitution of components may impair Intrinsic Safety.
8 No revision to drawing without prior FMRC approval.
Canadian Standards Association Installation Notes

1 Installation must be in accordance with the Canadian Electrical Code (Part I), ANSI/ISA-RP12.6, and the manufacturers instructions.
2 If the electrical parameters of the cable used are unknown, the following values may be used: Capacitance 60 pF/ft.; Inductance 0.20 H/ft.
3 The wiring between each Inductive Proximity Sensor and its corresponding channel of the dual-channel barrier is a separate intrinsically safe circuit. Each of the two separate intrinsically safe
circuits shall be in separate cables or shall be separated from each other as specified in CEC. The supply return conductors may be connected at the barriers grounding terminal.
4 The Barrier bus must be insulated from other grounded metal. Use Power Rail 937A-PR08, 937A-PR20 and Power Feed Module 937A-PSFD.
5 The maximum nonhazardous location voltage must not exceed 250V AC or DC.
6 Barriers are not required for Division 2 (31.5V DC max.). Division 2 applications must be installed in accordance with the CEC.
7 In Division 2 applications without barriers observe the following warnings:
WARNING: EXPLOSION HAZARD. Do not disconnect equipment unless power has been switched off or the area is known to be nonhazardous.
8 WARNING: Substitution of components may impair Intrinsic Safety.
9 No revision to drawing without prior CSA approval.
ATTENTION: These parameters must be adhered to.

871TS Food and Beverage

PPS Plastic Face/Stainless Steel 316L Barrel
Specifications
Attribute 12 mm and 18 mm
Load Current 200 mA
Voltage Drop 2.0V
871TS DC Micro Quick-disconnect Style Repeatability 5%

12 mm and 18 mm Hysteresis 10% typical
Enclosure Type Rating NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13; IP67, IP68, and IP69K
Housing Material Stainless steel 316L, PPS (FDA Certified) plastic face
Connection Type Quickdisconnect: 4-pin micro style
Status Indicator Yellow: Output Energized
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3

Micro QD Style Normally Open and Normally Closed

A N.C. -- +
-- + Load
D
Load N.C.
Status
Indicator 2 1
C 2 1 3 4
-- +
M12 x 1
B 3 4 Load N.O.
N.O. -- +
Load
1030V DC 1030V DC
-- + -- +
Shielded mm (in.)
Barrel Type Thread Size
A B C D
Yes 38.1 (1.50)
M12 X 1 12.0 (0.47) 65.0 (2.56)
No 32.5 (1.28) 6.5 (0.26)
Threaded
Yes 34.5 (1.36)
M18 X 1 18.0 (0.71) 63.0 (2.48)
No 26.5 (1.04) 8.0 (0.31)
Yes
Smooth 18.0 (0.71) 63.0 (2.48)
No 8.0 (0.31)

871Z 3-wire DC Weld Field Immune

PTFE Face/Threaded PTFE-Coated Brass Barrel
Specifications
Load Current 200 mA
Voltage Drop 2.4V
871Z DC Mini Quick-disconnect Style Repeatability 10%
18 mm and 30 mm
Weld Field Immunity 20,000 A at 1 inch
Housing Material PTFE coated brass barrel
Connection Type Quick-disconnect: 4-pin mini style, 4-pin micro style
871Z DC Micro Quick-disconnect Style
12 mm, 18 mm, and 30 mm Operating Temperature -25+70 C (-13+158 F)
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.30.4


A PNP (Sourcing)
Status
Indicator +
D Load 1 4
-- 2 3
C
B -- 1030V DC +
7/8-16-UN-2A
mm (in.)
A B C
M18 x 1 18.0 (0.71) 90.0 (3.54) 53.0 (2.09)
Yes
M30 x 1 30.0 (1.18) 90.0 (3.54) 56.0 (2.20)

PNP (Sourcing)
A
Status 2 1
Indicator 3 4
-- +
C Load
-- 1030V DC +
B
M12 x 1
mm (in.)
A B C
M12 x 1 12.0 (0.47) 70.0 (2.76) 50.0 (1.97)
M18 x 1 Yes 18.0 (0.71) 80.0 (3.15) 60.0 (2.36)
M30 x 1 30.0 (1.18) 80.0 (3.15) 60.0 (2.36)

871Z 2-wire AC/DC Weld Field Immune

Thermoset Plastic Face/Threaded PTFE-Coated Brass Barrel
Specifications
871Z AC/DC Cable Style Voltage Drop 10V @ 5200 mA 10V @ 5250 mA
18 mm and 30 mm
Repeatability 10% at constant temperature
Short circuit (trigger @ 5 A typical), false Short circuit (trigger @ 8 A typical), false
pulse, reverse polarity (DC output), pulse, reverse polarity (DC output),
Protection Type
overload (trigger @ 260 mA typical), overload (trigger @ 320 mA typical),
and transient noise and transient noise
Enclosure Type Rating NEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, 13; IP67 (IEC529)
871Z AC/DC Mini Quick-disconnect Style
12 mm, 18 mm, and 30 mm Housing Material PTFE coated housing
Cable: 2 m (6.5 ft) length
Connection Type H2 - 3 conductor #18 AWG ToughLink
Quick-disconnect: 3-pin micro style, 3-pin mini style
Status Indicator Red Flashing: Short circuit/overload
Green: Power
871Z AC/DC Micro Quick-disconnect Style Shock 30 g (1.06 oz), 11 ms

12 mm, 18 mm, and 30 mm Vibration 55 Hz, 1 mm amplitude, 3 planes
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.30.4


2 Status Brown Brown
Indicators
2 m (6.5 ft) Blue Load Blue Load
Green Green
A C B
Note: Rear portion of barrel left uncoated for ground contact on

12 mm models
Shielded mm (in.)
Thread Size
A B C D
M18 X 1 Yes 18.0 (0.71) 74.68 (2.94) 61.6 (2.43)
0.8 (0.03)
M30 X 1 No 30.0 (1.18) 77.52 (3.05) 64.3 (2.53)
Mini QD Style Normally Open and Normally Closed

Ground
2 Status A
Indicators
D 1
2 3
C
B Load
7/8-16-UN-2A
Note: Rear portion of barrel left uncoated for ground contact on 12 mm models. Note: No ground pin on 12 mm. Attach hosing to ground.
mm (in.)
A B C D
Yes 46.2 (1.82) 0.8 (0.03)
M12 X 1 12.0 (0.47) 93.45 (3.68)
No 40.7 (1.52) 8.1 (0.32)
M18 X 1 Yes 18.0 (0.71) 75.82 (2.99) 57.28 (2.26) 0.8 (0.03)
M30 X 1 No 30.0 (1.18) 86.66 (3.41) 64.3 (2.53) 0.8 (0.03)
Micro QD Style Normally Open and Normally Closed
Ground
A
1
2 Status D 2 3 Load
Indicators
C
B
M12 x 1
Note: No ground pin on 12 mm. Attach housing to ground.
Note: Rear portion of barrel left uncoated for ground contact on 12 mm models. Note: Load can be switched to pin 3.
mm (in.)
A B C D
Yes 46.7 (1.85) 0.8 (0.03)
M12 X 1 12.0 (0.47) 90.1 (3.55)
No 39.7 (1.56) 8.1 (0.32)
M18 X 1 Yes 18.0 (0.71) 83.5 (3.29) 61.6 (2.43) 0.8 (0.03)
M30 X 1 No 30.0 (1.18) 86.0 (3.38) 64.3 (2.53) 0.8 (0.03)

871ZT 3-wire DC Weld Field Immune/Equal Sensing

PTFE Face/Threaded PTFE-coated Brass Barrel
Specifications
Leakage Current <0.08 mA
Voltage Drop 2.5V
871ZT DC Micro
Weld Field Immunity Up to 1260 Gausses (M5)
12 mm, 18 mm, and 30 mm Certifications UL Listed and CE Marked for all applicable directives
Enclosure Type Rating IP67 (IEC 529)
Housing Material PTFE coated brass barrel
Status Indicator 360 status indicator visibility; Orange: Target present
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.91.1
Aluminum 0.91.1
Copper 0.91.1

A PNP (Sourcing)
2 Status D
Indicators 2 1
3 4
C
B
Load
M12 x 1 -- +
1030V DC
-- +
mm (in.)
A B C D
Yes 50.0 (1.97)
M12 X 1 12.0 (0.47)
No 40.0 (1.58) 10.0 (0.39)
Yes 50.0 (1.97)
M18 X 1 65.0 (2.56)
No 18.0 (0.71) 40.5 (1.59) 10.0 (0.39)
Yes 50.5 (1.99)
M30 X 1
No 30.0 (1.18) 37.5 (1.48) 13.0 (0.51)

872C WorldProx 3- and 4-wire DC Tubular Sensors

Specifications
Attribute 8 mm 12 mm 18 mm 30 mm
Leakage Current 5 A 10 A
Operating Voltage 530V DC 1030V DC
Voltage Drop 1.5V 1.8V
Switching Frequency 2500 Hz 1300 Hz (1) 1500 Hz (1) 1000 Hz (1)
No-load Supply Current 10 mA
DC Micro Quick-disconnect Style
Repeatability 5%
8 mm, 12 mm, 18 mm, and 30 mm
Protection Type False pulse on power, transient noise, reverse polarity, short circuit, and overload
Enclosure Type Rating IP67
Nickel-plated brass barrel nuts with
Nickel-plated brass barrel nuts with integral locking
Housing Material integral locking feature, plastic face feature, plastic face (PBT)
(LCP)
Cable (PVC/PUR):
Cable (PVC/PUR):
2 m (6.5 ft), 5 m (16.4 ft), 10 m (32.8ft) length,
2 m (6.5 ft), 5 m (16.4 ft), 10 m 4.3 mm (0.17 in.) diameter; 3x 0.34mm (0.01 in.) or
DC Pico Quick-disconnect Style (32.8 ft) length, 3.5 mm 4x 0.34 mm PVCor PUR
6.5 mm, 8 mm, and 12 mm (0.175 in.) dia. (PVC); 3.3 mm dia. Cable (Pigtail):
Connections (PUR); 3 x 0.14 mm PVC or PP
Cable (Pigtail): 0.2 m (0.7 ft), 0.5 m (1.6 ft), 1 m (3.3 ft) length,
Integral connector (M12) 3- or 4-pin micro QD
0.2 m (0.7 ft), 0.5 m (1.6 ft), 1 m Quick-disconnect:
(3.3ft) length
Connector: 3-pin M12 or 3-pin M8 3- or 4-pin micro QD (M12) or [3-pin pico QD (M8) for
12 mm only]
Status Indicator Amber: output energized Amber: output energized
DC Cable Style
6.5 mm, 8 mm, 12 mm, 18 mm, and 30 mm Shock 30 g (1.06 oz), 11 ms half-sine
Nominal Sensing Distance (mm [in.])

Extended
Size Description Standard Sensing Range Sensing Range
Shielded 2 (0.08)
6.5 mm
Unshielded 3 (0.12)
Shielded 2 (0.08) 3 (0.12)
8 mm
Unshielded 3 (0.12) 4 (0.16)
Pigtail Cable with Integral Micro QD Connector Shielded 3 (0.12) 4 (0.16)
12 mm
8 mm, 12 mm, 18 mm, and 30 mm Unshielded 4 (0.16) 8 (0.31)
Shielded 5 (0.20) 8 (0.31)
18 mm
Unshielded 8 (0.31) 12 (0.47)
Shielded 10 (0.39) 15 (0.59)
30 mm
Unshielded 15 (0.59) 20 (0.79)
Correction Factors (mm [in.])

Target Material 6.5 mm 8 mm 12 mm 18 mm 30 mm
Steel 1.0 1.0 1.0 1.0 1.0
Stainless Steel 0.70.8 0.70.8 0.70.8 0.70.8 0.70.8
Brass 0.450.55 0.450.55 0.450.55 0.450.55
Aluminum 0.30.4 0.450.55 0.450.55 0.40.5 0.450.55
Copper 0.20.3 0.350.45 0.350.45 0.30.45 0.350.45
(1) Select 3-wire models have switching frequency less than previously specified:
12 mm diameter shielded, extended range, N.O., PNP, micro QD 800 Hz
12 mm diameter unshielded, extended range, N.O., PNP, micro QD 1000Hz
18 mm diameter shielded, extended range, N.O., PNP, micro QD, and cable 500Hz
30 mm diameter shielded, extended range, N.O., PNP, micro QD <100 Hz at SD = 7.5 mm (0.3 in.), 200 Hz at SD = 10 mm (0.39 in.)

872C WorldProx 3- and 4-wire DC Tubular Sensors

8 mm, 12 mm, 18 mm, and 30 mm Pinouts
M8 3-pin M12 3-pin M12 4-pin
4 1 1
1 3 4 2 4
3 3
1 BN (brown)2 WH (white)3 BU (blue)4 BK (black)
8 mm, 12 mm, 18 mm, and 30 mm 3-wire DC Wiring

NPN/PNP Cable M12 Micro Connector M8 Pico Connector
BN 1 1
L+ L+ L+
NPN N.O. BK 4 4
BU L- 3 L- 3 L-
BN 1 1
L+ L+ L+
BK 2 4
NPN N.C.
BU 3 L- 3 L-
L-
BN L+ 1 1
L+ L+
PNP N.O. BK 4 4
BU L- 3 3
L- L-
BN L+ 1 1
L+ L+
PNP N.C. BK 2 4
BU L- 3 3
L- L-
12 mm, 18 mm, and 30 mm 4-wire DC Complementary Wiring

NPN/PNP Cable M12 Micro Connector M8 Pico Connector
BN L+ 1 L+
BK 4
NPN N.O. + N.C.
WHT 2
Complementary
BU L- 3 L-
BN 1
L+ L+
PNP N.O. + N.C. BK 4
Complementary WHT 2
BU L- 3 L-

872C WorldProx 3- and 4-wire DC Tubular Sensors Standard and Extended Sensing
Plastic Face/Threaded Nickel-plated Brass Barrel Standard Barrel Length
Cable Style Approximate Dimensions
Smooth mm (in.)
Dimensions [mm (in.)] Thread Size Barrel Type Shielded
Diameter A B (Max) C (Min) D (Max)
Nickel-plated
6.5 (1) Yes 6.50 (0.26) 33.0 (1.30)
Brass
Yes 8.00 (0.31) 30.0 (1.18)
M8 X 1 30.2 (1.19)
No 35.0 (1.38) 5.0 (0.20)
B
Yes 50.8 (2.00)
D C M12 X 1 12.0 (0.47) 46.7 (1.84)
No 58.8 (2.31) 8.0 (0.31)
Nickel-plated
A Brass Yes 50.8 (2.00)
M18 X 1 18.0 (0.71) 46.7 (1.84)
No 60.8 (2.39) 10.0 (0.39)
Status Indicators
Yes 50.8 (2.00) 47.8 (1.88)
M30 X 1 30.0 (1.18)
No 63.0 (2.48) 42.0 (1.65) 18.0 (0.71)
(1) 6.5 mm diameter is standard only
Micro QD Style Approximate Dimensions

mm (in.)
Yes 55.0 (2.16)
M8 X 1 8.00 (0.31) 30.0 (1.18)
No 60.0 (2.36) 5.00 (0.20)
B
Yes 64.3 (2.53)
M12 X 1 12.0 (0.47) 38.1 (1.50)
D C No 72.3 (2.85) 8.0 (0.31)
Nickel-plated
Brass Yes 65.5 (2.58)
M18 X 1 18.0 (0.71) 38.1 (1.50)
A M12x1 No 75.5 (2.97) 10.0 (0.39)
Status Indicators Yes 64.3 (2.53) 48.3 (1.90)
M30 X 1.5 30.0 (1.18)
No 76.5 (3.01) 42.5 (1.67) 18.0 (0.71)
Pico QD Style Approximate Dimensions

Smooth mm (in.)
Diameter A B (Max) C (Min) D (Max)
(1) Yes 6.50 (0.26) 49.0 (1.93)
6.5
B
D C Yes 50.0 (1.97)
M8 X 1 Nickel-plated 8.0 (0.31) 35.0 (1.38)
Brass No 55.0 (2.16) 5.0 (0.20)
A M8x1
Yes 63.5 (2.50)
Status Indicators
M12 X 1 12.0 (0.47) 47.5 (1.87)
No 71.5 (2.81) 8.0 (0.31)
(1) 6.5 mm diameter is standard only

872C WorldProx 3- and 4-wire DC Tubular Sensors Standard and Extended Sensing
Plastic Face/Threaded Nickel-plated Brass Barrel Short Barrel Length
Cable Style Approximate Dimensions
mm (in.)
Dimensions Thread Size Barrel Type Shielded
Yes 25.0 (0.98)
M8 X 1 8.0 (0.31) 25.0 (0.98)
No 30.0(1.18) 5.0 (0.2)
Nickel-plated Yes 34.8 (1.37)
B M12 X 1 12.0 (0.47)
Brass No 42.8 (1.68) 8.0 (0.31)
D C
Yes 34.8 (1.37) 31.8 (1.25)
M18 X 1 18.0 (0.71)
A No 44.8 (1.76) 10.0 (0.39)
Yes 34.8 (1.37)
Status Indicators
Nickel-plated
M30 X 1 30.0 (1.18)
Brass No 47.0 (1.85) 26.0 (1.02) 18.0 (0.71)
Micro Style Approximate Dimensions

mm (in.)
Yes 45.0 (1.77)
M8 X 1 8.0 (0.31) 20.0 (0.79)
No 50.0 (1.97) 5.0 (0.20)
B
Yes 48.3 (1.90)
M12 X 1 12.0 (0.47) 27.4 (1.08)
D C No 56.4 (2.22) 8.0 (0.31)
Nickel-plated
Brass Yes 49.5(1.95)
M18 X 1 18.0 (0.71) 26.4 (1.04)
A M12x1 No 59.5 (2.34) 10.0 (0.39)
Status Indicators Yes 50.8 (2.00) 31.8 (1.25)
M30 X 1.5 30.0 (1.18)
No 63.2 (2.49) 29.2 (1.15) 18.0 (0.71)
Pico Style Approximate Dimensions

mm (in.)
Yes 45.0 (1.77)
M8 X 1 8.0 (0.31) 30.0 (1.18)
B No 50.0 (1.97) 5.0 (0.2)
D C
Nickel-plated Yes 45.2 (1.78)
Brass
A M8x1 M12 X 1 12.0 (0.47) 29.2 (1.15)
No 53.2 (2.10) 8.0 (0.31)
Status Indicators

802PR 2-wire AC, High-output Rectangular Sensors

Limit Switch Style
Specifications
Attribute 802PR
Load Current 1 A at 40 C (104 F) linearly de-rated to 0.5 A at 75 C (167 F)
Inrush Current 10 A/1 s
Current Consumption 25 mA, min.
Leakage Current 3.5 mA (60132V AC); 6.5 mA (102132V AC)
Operating Voltage 60132V AC or 102132V AC
802PR AC Conduit Style Voltage Drop 8.5V
Repeatability 0.025 mm
Hysteresis 15% (max.)
Enclosure Type Rating NEMA 1, 2, 3, 4, 4X, 12, 13, IP65 (IEC529)
Housing Material Self-extinguishing glass reinforced polyester body
Cable: 2.4 m (8 ft) or 3.7 m (12 ft) length, 2-conductor 16 AWG STO (oil-resistant
Connection Type thermoplastic)
802PR AC Cable Style Quick-disconnect: 3-pin mini; Conduit Opening or Conduit Coupler: 1/2-14 NPT
internal thread with screw terminals (use #1814 AWG wire)
Shock 30 g (1.06 oz), 11 ms
802PR AC Mini QD Style
Correction Factors
Steel 1.0
Brass 0.50.55
Aluminum 0.450.5
Copper 0.40.45


Cable Style Normally Open Wiring Diagrams
41.0
(1.63) 41.0
6.0 (0.23) 26.0 (1.63)
T1 T2 T1 T2
Dia. Holes Indicators (1.02) Load Load
Front Mounting
U.S. (1 5/32 x 2 11/32 in.) 42.0
DIN 30 x 60 (1.66) Note: Load can be switched to white lead.
6.0
(0.23)
109.0 117.0
(4.34) (4.63)
2.4 m (8 ft)
60.0 59.5
(2.34) (2.34)
30.0 29.4
(1.16) (1.16)
Front Mounting Hole Pattern Front View Rear Mounting Hole Pattern Front View
Two Holes for #10 or M5 Screws Two #10-32 Tapped Holes 9.5 (0.38)
Deep (LB Version Only)

41.0 41.0
(1.63) (1.63)
26.0
(1.02) 1
6.0 (0.23)
Dia. Holes LEDs 2 3
Front Mounting 42.0

U.S. (1 5/32 in. x 2 11/32 in.) (1.66)
DIN 30 x 60
6.0 Load
(0.23)
109.0
(4.34)
131.0
1/2-20UNF-2A (5.16)
60.0
60.0 (2.34)
(2.34)
30.0 30.0
(1.16) (1.16)
Note 1: Side sensing model heads can be turned in 90 increments to accommodate four side-sensing positions.
Note 2: Low voltage models have two status indicators.


26.0
41.0 (1.02) 41.0
6.0 (0.23) (1.63) (1.63) T1 T2
Load
T1 T2
Load
Dia. Holes Indicators
Front Mounting U.S.
(1 5/32 in. x 2 11/32 in.) 42.0 Note: Load can be switched to terminal 1
(1.66)
DIN 30 x 60
6.0 (0.23)
1/2-14 NPTX0.5 in.
Deep or ISO 109.0
20-1.5 x 12.5 mm 117.0
(4.34) (4.63)
Inside Threads
16.0
(0.63) Conduit Coupler
1 in. Hub
1/2-14 NPT
Inside Threads
15.0
16.0 (0.59)
(0.63)
60.0
60.0 (2.34)
(2.34)
30.0 30.0
(1.16) (1.16)
Note 1: Side sensing model heads can be turned in 90 increments to accommodate four side-sensing positions.
Note 2: Low voltage models have two status indicators.

802PR 2-wire AC Hazardous Location, High-output Rectangular Sensors

Limit Switch Style
Specifications
Attribute 802PR
Load Current 1 A at 40 C (104 F) linearly derated to 0.5 A at 75 C (167 F)
Inrush Current 10 A/1 s
Current Consumption 25 mA, min.
802PR AC Conduit Style Operating Voltage 102132V AC
Voltage Drop 8.5V
Repeatability 0.025 mm
Hysteresis 15% (max.)
Certifications UL Listed and CSA Certified
NEMA 1, 2, 3, 4, 12, 13; IP65 (IEC529)
Division 2
Enclosure Type Rating Class I: Groups A, B, C, and D;
Class II: Groups F and G;
Class III: All groups
Housing Material Self-extinguishing glass reinforced polyester body
Conduit Coupler: 1/2 -14NPT internal thread with screw terminals (use
Connection Type
#1814AWG wire)
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.50.55
Aluminum 0.450.5
Copper 0.40.45

Conduit Style
41.0
(1.61) 41.0
26.0 (1.61)
6.0 (0.24) Status (1.02)
Dia. Holes Indicator 59.5 59.5
Front Mounting (2.34) (2.34)
42.0
U.S. (1 5/32 in. x 2 11/32 in.) (1.65)
DIN 30 x 60
6.0 29.4 29.4
(0.24) (1.16) (1.16)
109.0
(4.29) 124.0 Two Holes for #10 or M5 Screws Two #10-32 Tapped Holes 9.5 (0.38)
Conduit Coupler 1 in.
Hub 1/2-14 NPT (4.88) Deep (LB Version Only)
Inside Threads
16.0 15.0
(0.63) (0.59)
Note: Side sensing model heads can be turned in 90 increments to accommodate four side-sensing positions.

2-wire AC/DC Rectangular Sensors

Limit Switch Style
Specifications
Attribute 802
Load Current AC 425 mA; DC 225 mA
Leakage Current 1.7 mA at 132V, 2.5 mA at 250V
802PR AC/DC Cable Style
Voltage Drop 10V
Transient noise, short circuit, overload, false pulse, radio frequency (10V per meter;
Protection Type
frequency range 201000 MHz)
802PR AC/DC Mini Enclosure Type Rating NEMA 1, 2, 3, 4, 4X, 12, 13, IP65 (IEC529)
Quick-disconnect Style Housing Material Self-extinguishing glass-reinforced polyester body
Cable: 2.4 m (8 ft) length, 2-conductor ToughLink
Quick-disconnect: 3-pin micro style, 3-pin mini style
Connection Type
Conduit Opening or Conduit Coupler: Internal thread with screw terminals (use
#1814 AWG wire)
Green: Power
Status Indicator
Red: Output energized (both on in SCP/overload)
802 AC/DCM Operating Temperature -25+75 C (-13+167 F)
Shock 30 g (1.06 oz), 11 ms
802PR AC/DC
Conduit Style
Correction Factors
Steel 1.0
Stainless Steel 0.9
Brass 0.8
Aluminum 0.75
Copper 0.7


41.0 White
(1.63) 41.0
6.0 (0.23) 26.0 (1.63)
Dia. Holes Indicators (1.02) Black Load
Front Mounting
U.S. (1 5/32 x 2 11/32 in.) 42.0
DIN 30 x 60 (1.66)
6.0
(0.23) Note: Load can be switched to white lead.
109.0 117.0
(4.34) (4.63)
2.4 m (8 ft)
60.0
60.0 (2.34)
(2.34)
30.0 30.0
(1.16) (1.16)
41.0 41.0
(1.63) (1.63)
26.0
(1.02)
6.0 (0.23) 1
Dia. Holes LEDs
42.0 2 3
Front Mounting
U.S. (1 5/32 in . x 2 (1.66)
11/32 in.)
DIN 30 x 60 Load
6.0
(0.23)
109.0
(4.34)
131.0
(5.16)
7/8-16UN
60.0
60.0 (2.34)
(2.34)
30.0 30.0
(1.16) (1.16)


Micro Style Normally Open
41.0 41.0
(1.63) (1.63)
26.0 1
(1.02)
6.0 (0.23) 2 3 Load
Dia. Holes LEDs
ont Mounting 42.0
32 in. x 2 11/32 in.) (1.66)
DIN 30 x 60 Note: Load can be switched to pin 2.
6.0
(0.23)
109.0
(4.34)
131.0
1/2-20UNF-2A (5.16)
60.0 60.0
(2.34) (2.34)
30.0
(1.16) 30.0
(1.16)
Conduit QD Style Normally Open

26.0
41.0 (1.02) 41.0
6.0 (0.23) (1.63) (1.63)
Dia. Holes Indicators T1 T2
Load
Front Mounting U.S.
(1 5/32 in. x 2 11/32 in.) 42.0
(1.66)
DIN 30 x 60 Note: Load can be switched to terminal 1.
6.0 (0.23)
1/2-14 NPTX0.5 in.
Deep or ISO 109.0
20-1.5 x 12.5 mm 117.0
(4.34) (4.63)
Inside Threads
16.0
(0.63) Conduit Coupler
1 in. Hub
1/2-14 NPT
Inside Threads
15.0
16.0 (0.59)
(0.63)
60.0
60.0 (2.34)
(2.34)
30.0 30.0
(1.16) (1.16)

802PR 2-wire AC/DC Hazardous Location Rectangular Sensors

Limit Switch Style
Specifications
Attribute 802PR
Load Current AC: 425 mA, DC: 225 mA
Leakage Current 1.7 mA at 132V, 2.5 mA at 250V
Voltage Drop 10V
802PR AC Conduit Style
Transient noise, short circuit, overload, false pulse, radio frequency (10V per
Protection Type
meter; frequency range 201000 MHz)
Certifications UL Listed and CSA Certified
NEMA 1, 2, 3, 4, 12, 13; IP65 (IEC529); Division 2 Class I: Groups A, B, C, and D; Class
Enclosure Type Rating
II: Groups F and G; Class III: All groups
Housing Material Self-extinguishing glass-reinforced polyester body
Conduit Coupler: 1/2 - 14 NPT internal thread with screw terminals, use
Connection Type
#1814AWG wire
Green: Power
Status Indicator Red: Output energized (both on in SCP/Overload)
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Stainless Steel 0.9
Brass 0.8
Aluminum 0.75
Copper 0.7


Conduit Style
41.0
(1.61) 41.0
26.0 (1.61)
6.0 (0.24) Status (1.02) T1 T2
Dia. Holes Indicator Load
Front Mounting 42.0
U.S. (1 5/32 in. x 2 11/32 in.) (1.65)
DIN 30 x 60 Note: Load can be switched to terminal 1.
6.0
(0.24)
109.0
Conduit Coupler 1 in. (4.29) 124.0
Hub 1/2-14 NPT (4.88)
Inside Threads
16.0 15.0
(0.63) (0.59)
60.0
60.0 (2.34)
(2.34)
30.0 30.0
(1.16) (1.16)

871F 3-wire DC Rectangular Sensors

Block Style
Specifications
Attribute 871F
Load Current 400 mA
Voltage Drop 2.4V
Repeatability 10%
871F DC Cable Style
Housing Material Aluminum body
Cable: 2 m (6.5 ft) length, 3-conductor PVC
Indicator Status Indicators Orange: Output energized
871F DC Micro Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


PNP (Sourcing) NPN (Sinking)
100.0 + -- + --
Sensing (3.94) 2m
Area (6.5 ft) 1030V DC 1030V DC
Brown
Brown + --
Status
Indicator
6.5
(0.26)
Black Load + -- Blue
Load Black
40.0 Blue
(1.57)
115.0
(4.53)
35.0
50.0 (1.38) Sensing Distance
(1.97) Adjustment Potentiometer

100.0 M12 x 1 + --
Sensing (3.94) 1030V DC
Area Brown
2 1
3 4 Load
+ -- -- +
Status Blue
Indicator 6.5 Load Black
(0.26)
1030V DC
40.0 -- +
(1.57)
115.0
(4.53)
35.0
(1.38) Sensing Distance
50.0
(1.97) Adjustment Potentiometer

871F 4-wire DC Complementary Output Rectangular Sensors

Flat Pack Style
Specifications
Attribute 871F
Voltage Drop 2.5V
Repeatability 2%
871F DC Mini
Quick-disconnect Style Hysteresis 5% typical
Certifications c-UL-us Listed and CE Marked for all applicable all directives
NEMA 1, 2, 3, 4, 6, 6P, 12 and 13; IP67 (IEC529), 1200 psi (8270 kPa) washdown;
micro connector versions also meet IP69K (IEC529)
Quick-disconnect: 4-pin mini, 4-pin micro
Connection Type Conduit Opening: 1/2 - 14NPT thread, PG 13.5 thread
Status Indicator Green: Power

Orange: Output energized
871F DC Micro Operating Temperature -25+70 C (-13+158 F)
Quick-disconnect Style Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


Mini QD Style Complimentary Normally Open and Closed Outputs
65.0 PNP (Sourcing) NPN (Sinking)
(2.56) 83.0
65.0 (3.27) -- N.C. + -- N.O. +
Status (2.56) Load
Indicators Load
-- N.O. +
-- N.C. +
Load Load
40.0 (1.57)
1030V DC 1030V DC
94.0 (3.70) -- + -- +
16.0
(0.63) 6.0 116.0
(0.24) (4.57)
Micro QD Style

(2.56) 83.0
65.0 (3.27) -- + N.C.
Status (2.56) Load -- +
Indicators N.C. Load
2 1
2 1
3 4 -- +
40.0 (1.57) N.O. 3 4 Load
-- + N.O.
Load
94.0 (3.70) 1030V DC
1030V DC
6.0 (0.24) 113.0 -- + -- +
13.0 (0.51) (4.45)
Conduit Style 1/2 in. NPT

65.0
(2.56) 65.0 83.0
(2.56) (3.27) + N.O. --
+
T1
+
T1 -- N.O. +
Status T4 Load T2 T4
Indicators Load
1030V DC
T5 Load Load 1030V D
44.0 (1.73) + N.C. -- T5
T2 -- N.C. +
--
--
94.0 (3.70)
Conduit Opening
1/2 in.--14 NPT 6.0
Internal Thread (0.24)
Conduit Style PG13.5

65.0 83.0
(2.56) 65.0 (3.27) + +
(2.56) T1
+ N.O. -- -- N.O. +
Status T1 T4 Load T2 T4 Load
Indicators
1030V DC
T5 Load T5 Load 1030V DC
44.0 (1.73) + N.C. -- -- N.C. +
T2
-- --
Conduit Opening 94.0 (3.70)
PG13.5
Internal Thread 6.0
(0.24)

871F 2-wire AC/DC Rectangular Sensors

Flat Pack Style
Specifications
Attribute 871F
Leakage Current 1.7 mA @ 120V; 2.0 mA @ 250V
871F AC/DC Voltage Drop 10V
Cable Style Repeatability 5%
Protection Type False pulse, transient noise, short circuit, and overload
NEMA 1, 2, 3, 4, 6, 6P, 12 and 13; IP67 (IEC529), 1200 psi (8270 kPa) washdown;
Cable: 2 m (6.5 ft), 2-conductor #22 AWG ToughLink;
Connection Type Quick-disconnect: 3-pin mini style, 3-pin micro style;
871F DC Mini Conduit Opening: 1/2 - 14NPT thread, PG 13.5 thread
Quick-disconnect Style Green: Power
Status Indicator Orange: Output energized
Shock 30 g (1.06 oz), 11 ms
871F DC Micro
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3

65.0 Brown
(2.56)
65.0 83.0 Blue
Status (2.56) (3.27) Load
Indicators
40.0 (1.57)
30.0
(1.18) 94.0 (3.70)
6.0 129.0
(0.24) (5.08)


Mini Style Normally Open
65.0 Ground
(2.56) 83.0
65.0 (3.27)
Status (2.56) 1
Indicators 2 3
Load
40.0 (1.57)
Note: Load can be switched to pin 3
94.0 (3.70)
16.0
(0.63) 6.0 116.0
(0.24) (4.57)
Micro QD Style
65.0
(2.56) 83.0 1
65.0 (3.27) 2 3 Load
Status (2.56)
Indicators

40.0 (1.57)
94.0 (3.70)
6.0 (0.24) 113.0
13.0 (0.51) (4.45)
Conduit Style 1/2 in. NPT Normally Open
65.0
(2.56) 65.0 83.0
(2.56) (3.27) T2 T3
Load
Status
Indicators
Note: Load can be switched to terminal 2
44.0 (1.73)
94.0 (3.70)
Conduit Opening
1/2 in.--14 NPT 6.0
Internal Thread (0.24)
Conduit Style PG13.5 Normally Open
65.0 83.0
(2.56) 65.0 (3.27)
(2.56) T2 T3
Load
Status
Indicators
Note: Load can be switched to terminal 2
44.0 (1.73)
Conduit Opening 94.0 (3.70)

PG13.5
Internal Thread 6.0
(0.24)

871F DC Weld Field Immune Rectangular Sensors

Flat Pack Style
Specifications
Attribute 871F
Load Current 200 mA
Voltage Drop 2.5V
Repeatability 5%
871F DC Mini Protection Type False pulse, transient noise, reverse polarity, short circuit, and overload Weld Field
Immunity1600 Gauss
Enclosure Type Rating NEMA 1, 2, 3, 4, 6, 6P, 12 and 13; IP67 (IEC529), 1200 psi (8270 kPa) washdown;
Housing Material Valox
Connection Type Quick Disconnect: 4-pin mini style, 4-pin micro style
Green: Power
Status Indicator Orange: Output energized
Shock 5 g (0.18 oz)
871F DC Micro Vibration 55 Hz, 1 mm amplitude, 3 planes
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


Mini QD Style Complimentary Normally Open and Closed Outputs

(2.56) 83.0
65.0 (3.27)
Status (2.56) -- N.C. + -- N.O. +
Indicators Load Load
-- N.O. +
-- N.C. +
Load Load
40.0 (1.57)
1030V DC 1030V DC
94.0 (3.70) -- + -- +
16.0
(0.63) 6.0 116.0
(0.24) (4.57)
Micro QD Style Complimentary Normally Open and Closed Outputs

(2.56) 83.0
65.0 (3.27) -- + N.C.
Status (2.56) Load -- +
Indicators N.C. Load
2 1
2 1
3 4 -- +
40.0 (1.57) N.O. 3 4 Load
-- + N.O.
Load
94.0 (3.70)
1030V DC 1030V DC
6.0 (0.24) 113.0 -- + -- +
13.0 (0.51) (4.45)

871F 2-wire AC/DC Weld Field Immune Rectangular Sensors

Flat Pack Style
Specifications
Attribute 871F
Load Current 100 mA
Leakage Current 1.7 mA @ 120V; 2.0 mA @ 250V
Voltage Drop 10V
Repeatability 5%
871F AC/DC WFI Micro Weld Field Immunity Gauss
Quick-disconnect Style Certifications c-UL-us Listed and CE Marked for all applicable all directives
Enclosure Type Rating NEMA 1, 2, 3, 4, 6, 6P, 12 and 13; IP67 (IEC529), 1200 psi (8270 kPa) washdown;
Housing Material Valox
Connection Type Quick Disconnect: 3-pin micro style
Green: Power
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Correction Factors
Target Material
Shielded Unshielded
Steel 1.0 1.0
Stainless Steel 0.70.8 0.70.8
Brass 0.50.6 0.40.5
Aluminum 0.40.5 0.40.5
Copper 0.40.5 0.40.5

65.0
(2.56) 83.0 1
65.0 (3.27) 2 3 Load
Status (2.56)
Indicators

40.0 (1.57)
94.0 (3.70)
6.0 (0.24) 113.0
13.0 (0.51) (4.45)

871F 2-wire AC/DC Weld Field Immune Rectangular Sensors

Puck Style
Specifications
Attribute 871F
Load Current 400 mA
Inrush Current (one cycle) 8 A
Voltage Drop 5V
Repeatability 10%
Protection Type Short circuit, false pulse, and transient noise
Enclosure Type Rating NEMA 4 and 13, IP67 (IEC529)
871F AC/DC WFI Mini and Micro
Housing Material Aluminum body, PTFE sensing area
Connection Type Quick-disconnect: 3-pin mini style, 3-pin micro style
Green: Power
Status Indicator
Orange: Output energized
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3

Sensing Area
Ground
7/8-16UN-2A
1
5.3 2 3
(0.21)
40.0
40.0 (1.57) Load
40.0 (1.57) (1.57)
50.0 Note: Load can be switched to pin 3
50.0 (1.97) Status
(1.97) 61.0 Indicators
(2.40)
Sensing
Area 1
1/2-20UNF-2A 2 3 Load
5.3
(0.21)
40.0
40.0 (1.57)
40.0 (1.57) (1.57)
50.0
50.0 (1.97) Status
(1.97) 61.0 Indicators
(2.40)

871FM Miniature Metal Flat Pack Sensors

Stainless Steel Face/Stainless Steel Barrel
Specifications
Attribute General-purpose Weld Field Immune
Load Current 100 mA; Auto detect (PNP/NPN) at power-up
Operator Voltage 1030V
Voltage Drop 1.8V
Switching Frequency 200 Hz 50 Hz
Power-On Delay (Time delay before
<80 ms
availability)
No-Load Supply Current 30 mA
Repeatability 5%
871FM Hysteresis 5% typical
30 x 52 x 14 mm Protection Type False pulse on power, transient noise, reverse polarity, short circuit, and overload
(1.18 x 2.04 x 0.55 in.)
Enclosure Type Rating IP69K IP67
Housing Material Stainless Steel 303 with Stainless Steel face
Factor-1 equal sensing Yes
Connections 203.2 mm (8 in.) pigtail with 4-pin Micro QD
Storage Temperature -40+70 C (-40+158 F)
Operating Humidity 595% relative (noncondensing)
Shock 30 g (1.06 oz) with 11 ms pulse duration
Vibration 55 Hz, 1 mm amplitude
IO-Link
871FM Protocol IO-Link V1.1
20 x 32 x 8 mm Interface Type IO-Link
(0.94 x 1.25 x 0.31 in.) Mode COM 2 (38.4 kBd)
Cycle Time 10.4 ms, minimum
SIO (standard I/O) Supported (pin 4 for either IO-Link or SIO)
Nominal Sensing Distance

Housing Size General-purpose
For weld field immune units, the
20 x 32 x 8 mm thickness of the weld slag coating
7 mm (0.27 in.)
(0.79 x 1.26 x 0.31 in.) on the sensor face (approximately
0.5mm[0.02in.]) reduces the
30 x 52 x 14 mm nominal range
10 mm (0.39 in.)
(1.18 x 2.05 x 0.55 in.)
Status Indication
Green Indicator (Power) Orange Indicator (Output) Condition
Off Off Power Off
On Off Powered On/No Target
Off On Target Present
Off Flash at 2.0 Hz Passed On Point (Margin Zone)
Flash at 2.0 Hz Off Short Circuit, Fault
Flash at 2.0 Hz Flash at 2.0 Hz; Reverse from Green Status Indicator Location Indication Mode

Dimensions [mm (in.)] Mounting

8 (0.31) 14 (0.55)
20 (0.79) R2.5 30 (1.18) R2.5
21.75
(0.86) Status
Indicator
32 3 36.75
(1.26) (0.12) (1.45) Status
52 Indicator
(2.05) 5
2x n3.3 (0.2)
2x n4.5
L
13 (0.51)
3
(0.12) 3 L 20 (0.79)
(0.12)
50 50
(1.97) (1.97)
M12x1 Thread M12x1 Thread

20 (W) x 32 (L) x 8 (H) A B C D E
7 mm Sensing 24 (0.94) 35 (1.38) 20 (0.79) 20 (0.79) 48 (1.89)
30 (W) x 52 (L) x 14 (H)
10 mm Sensing 45 (1.77) 45 (0.79) 30 (1.18) 30 (1.18) 90 (3.54)
Wiring [mm (in.)]

Standard Model: PVC
1: BRN + Cable Material
L+ Weld Tube Model: PUR
NPN (Sinking) 2 1 Standard: 3.05 mm (0.12 in.)
Cable Diameter
2: WH NC (DO)
Weld Tube: 6 mm (0.24 in.)
4: BLK NO (C/Q) 4 26 AWG, 0.75 mm (0.03 in.),
3 Wire Gauge 4 conductor
PNP (Sourcing)
3: BLU - L-
Nominal
Output Switching
Dimension Sensing Shielded Weld Field Immune Connector Type
Configuration Frequency [Hz]
Distance
0.2 m (0.66 ft) PVC pigtail,
200 No DC micro QD, 4-pin
20 (W) x 32 (L) x 8 (H) 7 (0.27) 200 No PVC cable, 2 m (6.56 ft)
50 Yes - ToughCoat Finish
Complementary DC micro QD, 4-pin
Yes
N.O./N.C. 0.2 m (0.66 ft) PVC pigtail,
200 No DC micro QD, 4-pin
30 (W) x 52 (L) x 14 (H) 10 (0.39) 200 No PVC cable, 2 m (6.56 ft)
50 Yes - ToughCoat Finish DC micro QD, 4-pin

871FM 3-wire DC Rectangular Sensors

Miniature Flat Pack StylePlastic Housing
Specifications
28 mm x 16 mm x 25 mm x 50 mm x 31 mm x 18 x mm x
Attribute
11 mm 10 mm 10 mm
Current Consumption <11 mA <8 mA 10 mA
50 mA @ 12V DC 100 mA
@ 24V DC
Leakage Current 100 A 100 A 100 A
Operating Voltage 1030V DC 1024V DC 1030V DC
871 FM DC Cable Style Voltage Drop 1.8V 2.5V 1V
28 mm x 16 mm x 11 mm Repeatability 5%
871 FM DC Cable Style Enclosure Type Rating NEMA 4; IP67 (IEC 529)
25 mm x 50 mm x 10 mm Housing Material Plastic
Cable: 2 m (6.5 ft) length, 3-conductor PVC
Connection Type Quick-disconnect: 3-pin pico style
Status Indicator Yellow: Output energized Red: Output energized
50 g (1.76 oz)
Shock 30 g (1.06 oz), 11 ms
871FM DC Cable Style (approximate)
30 x 18 x 10 mm 1055Hz @ 15 mm
Vibration 55 Hz, 1 mm (0.039 in.) amplitude, 3 planes (0.0390.2 in.)
Correction Factors
Steel 1.0
871FM DC Pico
Quick-disconnect Style Stainless Steel 0.85
28 x 16 x 11 mm Brass 0.55
Aluminum 0.5
Copper 0.45


Cable and Pico QD Style (28 x 16 x 11 mm) Cable Style (28 x 16 x 11 mm)
Normally Open
28 (1.10) NPN (Sinking) PNP (Sourcing)

22.2 (0.87) + -- + --
1030V DC 1030V DC
Brown
Brown + --
10.3 16
Load Black
(0.41) (0.63) Blue
Pico QD Style (28 x 16 x 11 mm)
Normally Closed
3.1 PNP (Sourcing)

Status (0.12)
+ --
Indicator 1030V DC
Brown + --
10.5 Black Load
(0.41)
Blue
Pico QD Style (28 x 16 x 11 mm)
5.5
Normally Open or Normally Closed
(0.22)
--
+
Load 4 Load
4
+ 1 3 1 3 --
+ 1030V DC -- + 1030V DC --
Unshielded Cable, Pico QD, and Shielded Pico QD Style Style 25 x 50 x 10 mm
(25 x 50 x 10 mm) Normally Open
4 NPN (Sinking) PNP (Sourcing)

7.3 (0.29) (0.16) + -- + --
Dia. 1060V DC 1060V DC
10 Brown
Brown + --
(0.39) + -- Blue Black
Load
Load
Black
Blue
4.3 (0.17) 3
Dia. (0.12) Normally Closed
Status
Indicator NPN (Sinking) PNP (Sourcing)
+ -- + --
1030V DC 1060V DC
25 15 Brown
Brown + --
(0.98) (0.59) + -- Load
Load Blue Black
Black
Blue
10 8
(0.39) (0.31)
50
(1.97)


Shielded Cable Style (25 X 50 X 10 mm) Cable Style (25 X 50 X 10 mm)
PNP (Sourcing)
4
7.3 (0.29) (0.16) +
Dia. Load
4
10 --
(0.39) 1 3
4.3 (0.17) 3 + 1060V DC --

Dia. (0.12)
Status
Indicator
25 15
(0.98) (0.59)
10 8
(0.39) (0.31)
50
(1.97)
Cable Style (31 X 18 X 10 mm) Cable Style (31 X 18 X 10 mm)
Normally Closed
Sensing PNP (Sourcing)

30.5
Face (1.2) + --
1030V DC
18 Brown + --
(0.71)
Black Load
12
5
(0.47) Blue
Status (0.2)
10 Indicator
(0.39)

871FM 3-wire DC Rectangular Sensors

Miniature Flat Pack StyleMetal Housing
Specifications
Attribute 871FM
Certifications UL Listed and CE Marked for all applicable directives
Environmental
Operating Environment IP67 (IEC 529)
871FM DC Pico Shock 30 g (1.06 oz), 11 ms
MS Square
Electrical
Load Current 200 mA
Voltage Drop 2.4V
871FM DC Cable Repeatability 10%
MS Square Hysteresis 12% typical
Protection Type False pulse, transient noise, reverse polarity, and short circuit
IO-Link
Protocol O-Link V1.0
Interface Type IO-Link
Mode COM 2 (38.4 kBd)
Cycle Time 10.4 ms, minimum
SIO (standard I/O) Supported (pin 4 for either IO-Link or SIO)
Mechanical
Housing Material Nickel-plated brass, polyester face
Status Indicator (SIO mode) Yellow: Output energized
Status Indicator (IO-Link Mode) Solid yellow: Sensor in IO-Link mode
Connection Type Cable, pico QD, or pico with lead
Correction Factors
Sensor Type/Target Material M5 Square M8 Square
(No Surrounding Metal) Shielded Shielded Unshielded
Steel 1 1 1
Copper 0.6 0.45 0.27
Aluminum 0.6 0.5 0.36
Brass 0.7 0.6 0.45
Stainless Steel 304 0.85 0.8 0.77
Switching Frequency
Head Size Nominal Sensing Distance [mm (in.)] Switching Frequency [Hz]
5 mm 0.8 (0.03) 5000
1.5 (0.06)
3000
8 mm 2.0 (0.08)
3.0 (.12) 1000


M5 and M8 Square Cable Normally Open
C NPN (Sinking) PNP (Sourcing)
D
A + -- + --
1030V DC 1030V DC
E Brown
Brown + --
B
Load Black
Blue
M5 Square with 6 inch Lead Normally Open

F NPN (Sinking) PNP (Sourcing)
--
Load
+
C 4
4 Load
+ 1 3
D 1 3 --
E
B
A + 1030V DC -- + 1030V DC --
M8 Square 3-Pin Pico Normally Open

C --
+
Load 4 Load
4
D + 1 3 1 3 --
E
+ 1030V DC -- + 1030V DC --
B
A

871L and 872L 3-wire DC Rectangular Sensors

Limit Switch Style
Specifications
Attribute 871L Models 872L Models
Operating Voltage 1060V DC 1030V DC
Voltage Drop 2.4V 2.5V
Repeatability 5%
871L and 872L DC Hysteresis 20% typical
Mini Quick-disconnect Style Protection Type False pulse, transient noise, reverse polarity, short circuit, and overload
Enclosure Type Rating NEMA 3, 4, 6, 12, 13; IP67 (IEC 529)
Housing Material Polyloy
Connection Type Quick-disconnect: 4-pin mini, 4-pin micro

Conduit Opening: 1/2-14 NPT internal thread with screw terminals
Green: Power (blinks in SCP/
Indicator Status Indicators overload), Green: Power (blinks in SCP/overload)
Orange: Output energized, Orange: Output energized
871L and 872L DC Red: Alignment indicator
Micro Quick-disconnect Style
Shock 30 g (1.06 oz), 11 ms
Correction Factors
Target Material Correction Factor
871L and 872L DC Steel 1.0
Conduit Style Stainless Steel 0.70.8
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


Conduit Style Normally Open
40.0 NPN (Sinking) PNP (Sourcing)

120.0
(4.72) (1.57) + -- + --
1060V DC 1060V DC
Status Indicators 40.0 T1
T1 + --
(1.57) Load
+ -- T3 T2
Conduit Load
Entrance T2 T3
1/2--14 NPT
Normally Closed
30.0 (0.29) 60.0
(2.36)
(1.18) 15.9 + -- + --
(0.63) 1060V DC 1060V DC
T1 T1 + --
Note: Head can be rotated in 22.5 increments to provide 16 side-sensing + -- T3 T2
Load
positions or rotated for top-sensing. Load
T2 T3

120.0 40.0 NPN (Sinking) PNP (Sourcing)
(4.72) (1.57)
Status Indicators -- +
40.0
(1.57) Load Load
17.0 + --
(0.67)
-- 1060V DC + -- 1060V DC +
7/8-16UN-2A
7.3
60.0
(0.29) (2.36)
30.0
(1.18)
Note: Head can be rotated in 22.5 increments to provide 16 side-sensing
positions or rotated for top-sensing.
120.0 40.0 NPN (Sinking) PNP (Sourcing)

(4.72) (1.57)
Status
Indicators 40.0
(1.57)
Load
-- +
--
Load +
1060V DC + 1060V DC
M12 X 1 -- -- +
7.3
30.0 (0.29) 60.0
(1.18) (2.36)

871L AC/DC and 872L AC 2-wire Rectangular Sensors

Limit Switch Style
Specifications
Attribute 871L Models 872L Models
Inrush Current (one cycle) 8 A
Leakage Current 2 mA
Operating Voltage 20250V AC/DC 20250V AC
871L and 872L DC Voltage Drop 5V
Mini Quick-disconnect Style Repeatability 5%
Hysteresis 20%
Protection Type False pulse and transient noise
Enclosure Type Rating NEMA 3, 4, 6, 12, 13; IP65 (IEC 529)
Housing Material Polyloy
Quick Disconnect: 3-pin mini style, 3-pin micro style
Connection Type
Conduit Opening: 1/2-14 NPT internal thread with screw terminals
871L and 872L DC Green: Power (blinks in SCP/overload)
Micro Quick-disconnect Style Indicator Status Indicators Orange: Output energized
Shock 30 g (1.06 oz), 11 ms
Correction Factors
871L and 872L DC Steel 1.0
Conduit Style Stainless Steel 0.70.8
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


Conduit Style Normally Open Normally Closed
120.0 40.0
(4.72) (1.57)
T1 T2 T1 T2
Load Load
Status Indicators 40.0
(1.57)
Conduit Note: Load can be switched to terminal 1. Note: Load can be switched to terminal 1.
Entrance
1/2--14 NPT
7.3
30.0 (0.29) 60.0
(2.36)
(1.18) 15.9
(0.63)

120.0 40.0
(4.72) (1.57) 1
Status Indicators 2 3
40.0
(1.57)
17.0 Load
(0.67)
7/8-16UN-2A
7.3
60.0
(0.29) (2.36)
30.0
(1.18)
120.0 40.0
(4.72) (1.57) 1
Status 2 3 Load
Indicators 40.0
(1.57)
M12 X 1
7.3
30.0 (0.29) 60.0
(1.18) (2.36)

871P 2-wire AC Rectangular Sensors

Can Sensors
Specifications
Attribute 871P
Inrush Current <5 A (20 ms)
Operating Voltage 30150V AC RMS
871P AC Long Range Line Frequency 4060 Hz
76 X 36 X 58 mm
Voltage Drop <15V @ 300 mA
Repeatability 2%
Certifications UL Listed and CE Marked for all applicable directives
Enclosure Type Rating NEMA 1, 3, 4, 4X, 6, 6P, 12, 13; IP67 (IEC 529), 1200 psi (8270 kPa) washdown
Connection Type 3-pin mini style
Operating Temperature -20+70 C (0160 F)

Long -Range Mini QD Style
1/4--20 x 0.63 Ground
2 Places 1
2 3 Load
70.6 58.67
(2.78) (2.31)
39.62 Note: Load can be switched to pin 2.
(1.56)
35.05 38.1
(1.38) (1.50)
76.2
(3.00)

871P 4-wire DC Rectangular Sensors

Can Sensors
Specifications
Attribute 871P
Load Current 300 mA
Operating Current 25 mA (off), 55 mA (on)
Voltage Drop 2.5V
Repeatability 2%
Hysteresis 315%
Protection Type False pulse, transient noise, short circuit, overload, and reverse polarity
871P DC Short Range Enclosure Type Rating NEMA 1, 3, 4, 4X, 6, 6P, 12, 13; IP67 (IEC 529), 1200 psi (8270 kPa) washdown
76 X 36 58 mm A2: 2 m (6.6 ft) shielded PVC jacketed cable, 4-wire, #22 AWG, 1/2 in. NPT
Connection Type N4: 4-pin mini quick-disconnect
Housing Material Stainless steel, plastic face
Mounting Two stainless steel studs
Approximate Dimensions [mm (in.)] Conduit Style

1/4--20 x 0.63
2 Places
70.6 58.67
(2.78) (2.31)
39.62
(1.56)
35.05 38.1
(1.38) (1.50)
76.2
(3.00)
Long Range Cable Style Long Range Mini QD Style
6.35 1/4--20 x 0.63
(0.25) ref. 2 Places
1/2 NPT 1/4--20 x 0.63
2 Places
70.6
(2.78) 58.67
76.45 39.62 (2.31)
(3.01) 58.67 (1.56)
39.62 (2.31) 35.05
(1.56) 44.45
(1.38) 140 (1.75)
35.05 44.45 (5.50)
(1.38) (1.75)
140
(5.50)
Cable Style Mini QD Style

+ -
1030V DC --
Note: Red and black wires must be
NPN (Sink) connected for proper operation.
Load
White Black PNP + -- 1030V DC
+ --
Load
+ -- (Source)
Load +
Red Green
PNP (Source) NPN
Load
(Sink) - +
Shield

871P 4-wire DC Motion Rectangular Sensors

Can Sensors
Specifications
Attribute 871P
Load Current 300 mA
Voltage Drop 2.5V
Repeatability 2%
Hysteresis 315%
Output Time Delay 0.5 s after motion stops
871L and 872L DC Protection Type False pulse, transient noise, short circuit, overload, and reverse polarity
Mini Quick-disconnect Style Enclosure Type Rating NEMA 1, 3, 4, 4X, 6, 6P, 12, 13; IP67 (IEC 529), 1200 psi (8270 kPa) washdown
A2: 2 m (6.6 ft) shielded PVC jacketed cable, 4-wire, #22 AWG, 1/2 in. NPT
D4: 4-pin micro quick-disconnect
Status Indicator Dim Blink: Cans moving
Bright Steady: No motion
Sensitivity Adjustment Sensing range adjust
Mounting Two stainless steel studs

Cable Style
6.35 + -
(0.25) ref. 1030V DC
1/2 NPT 1/4--20 x 0.63
2 Places NPN (Sink)
White Black
Load
+ -- + --
76.45 Red Green Load
(3.01) 58.67 PNP (Source)
39.62 (2.31)
(1.56)
Shield
35.05 44.45
(1.38) (1.75)
140
(5.50)
Mini and Micro QD Style

1/4--20 x 0.63 --
2 Places
PNP + -- 1030V DC
Load
(Source)
70.6 +
(2.78) 58.67
39.62 (2.31) NPN
(1.56) Load
(Sink) - +
35.05 44.45
(1.38) 140 (1.75)
(5.50)

871P 4-wire DC Motion Rectangular Sensors

Can Sensors
Specifications
Attribute 871P
Load Current 300 mA
Voltage Drop 2.5V
Repeatability 2%
Hysteresis 315%
Output Time Delay 0.5 s after motion stops
871L and 872L DC
Enclosure Type Rating NEMA 1, 3, 4, 4X, 6, 6P, 12, 13; IP67 (IEC 529), 1200 psi (8270 kPa) washdown
Mini Quick-disconnect Style
A2: 2 m (6.6 ft) shielded PVC jacketed cable, 4-wire, #22 AWG, 1/2 in. NPT
D4: 4-pin micro quick-disconnect
Status Indicator Dim Blink: Cans moving
Bright Steady: No motion
Sensitivity Adjustment Sensing range adjust
Mounting 2 stainless steel studs

Cable Style
6.35 + -
(0.25) ref. 1030V DC
1/2 NPT 1/4--20 x 0.63
2 Places NPN (Sink)
White Black
Load
+ -- + --
76.45 Red Green Load
(3.01) 58.67 PNP (Source)
39.62 (2.31)
(1.56)
Shield
35.05 44.45
(1.38) (1.75)
140
(5.50)
Mini and Micro QD Style
1/4--20 x 0.63 --
2 Places
PNP + -- 1030V DC
Load
(Source)
70.6 +
(2.78) 58.67
39.62 (2.31) NPN
(1.56) Load
(Sink) - +
35.05 44.45
(1.38) 140 (1.75)
(5.50)

871P VersaCube 3-wire DC Rectangular Sensors

General-purpose
Specifications
Attribute 871P
Load Current 200 mA
Voltage Drop <2.5V @ 200 mA
Repeatability 5%
871P DC Micro Protection Type False pulse, transient noise, short circuit, overload, and reverse polarity
Quick-disconnect Style Certifications c-UL-us Listed and CE Marked for all applicable directives
NEMA 1, 2, 3, 4, 6, 6P, 12, 13; IP67 (IEC 529), 1200 psi (8270 kPa) washdown; micro
Enclosure Type Rating connector versions also meet IP69K (IEC 529)
Housing Material Body: Plastic

Base: Zinc
Connection Type Quick disconnect: 4-pin mini style, 4-pin micro style

Green: Power
Shock 30 g (1.06 oz), 11 ms
871P DC Mini
Correction Factors
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


Cable Style Normally Open or Normally Closed

(1.57)
68.7 -- +
(2.70) Load Load
40.0 1 4 1 4
7/8--16 UN--2A (1.57) 2 3 + -- 2 3
-- 1060V DC + -- 1060V DC +
46.2 (2)
30.0 (1.18)(1) (1.82)
2 Places
28.2
7.3 (0.29) x 5.3 (0.21) (1.11)
Mounting Slots
4 Places
(1) With retrofit adapter, spacing between mounting holes becomes 20.0 (0.79).
(2) With retrofit adapter, distance from face to mounting holes becomes 60.0 (2.36).
Mini and Micro QD Style Normally Open or Normally Closed

(1.57)
68.8 2 1 2 1
(2.71) 3 4 Load 3 4
-- +
40.0 -- +
(1.57) Load
M12 X 1 -- 1060V DC + -- 1060V DC +
30.0 (1.18) 46.2

2 Places (1) (1.82) (2)
28.2
7.3 (0.29) x 5.3 (0.21) (1.11)
Mounting Slots 4 Places
ATTENTION: Unit must be mounted to a grounded metal frame or grounded via field wiring lug per NEC requirements.
Recommended grounding lug is included with the mounting kit (catalog number 871A-PKIT).


General-purpose
Specifications
Attribute 871P
200 mA from -25+50 C (-13+122 F)
Load Current
100 mA from 5070 C (122158 F)
Repeatability 10%
Weld Field Immunity 1000 Gausses
871P DC Micro
Mini Quick-disconnect Style Certifications c-UL-us Listed and CE Marked for all applicable directives
(Standard Zinc Mounting Bracket) NEMA 1, 2, 3, 4, 6, 6P, 12, 13; IP67 (IEC 529), IP68, IP69k, 1200 psi (8270 kPa)
washdown; Plastic body, zinc bracket, optional stainless steel L-bracket
Connection Type Quick Disconnect: 4-pin micro style
Power: Green
Output that is energized: Amber
Indicator Status Indicators Margin indication: Amber flashing (target within 80100% of operating
distance)
Short circuit or overload: Green and amber flashing
Shock 30 g (1.06 oz), 11 ms
Correction Factors
871P DC Micro DC
Mini Quick-disconnect Style
(Optional Stainless-steel Mounting L-Bracket) Steel 1.0
Stainless Steel 1.0
Brass 1.0
Aluminum 1.0
Copper 1.0
IMPORTANT The 871P VersaCube is offered with ToughCoat Finish on the sensor face. This finish is a proprietary epoxy-based material that
resists the adhesion and accumulation of weld-slag particles, which improves and extends sensor performance.


Zinc Bracket No Bracket
68.24
(2.69) 68.24
(2.69)
30 40 40
(1.18) (1.58) 40
(1.58) (1.58) 40
(1.58)
32
(1.26) 6
(0.24)
40
M12x1 Thread (1.58)
2 - 5.3 (0.21) M12x1 Thread 40
Dia. holes (1.58)
10.6 (0.42) x 5.3 (0.21)
20 Mounting Slots (2 Places)
20 (0.79)
(0.79)
Wiring Diagrams Micro QD Style

L Bracket Complimentary Normally Open and Normally Closed
68.24
(2.69) N.C. -- +
-- + Load
Load N.C.
40
(1.57) 2 1
40 2 1
(1.57) -- + 3 4
3 4 Load N.O.
N.O. -- +
Load
1030V DC 1030V DC
M12x1 Thread -- + +
40
4 - 5.3 (0.21) dia. holes (1.57)
8 (0.32)
20 12 (0.47)
30 (0.79)
(1.18)


General-purpose
Specifications
Attribute 871P
Inrush Current 2 A
Leakage Current 1.5 mA @ 20V, 1.7 mA @ 120V, 2.0 mA @ 250V
Voltage Drop <10V
Repeatability 10% of effective operating distance
871P DC 872L DC Micro
Quick-disconnect Style Certifications c-UL-us Listed and CE Marked for all applicable directives
connector versions also meet IP69K (IEC 529)
Housing Material Plastic body, zinc base

Green: Power (short circuit if flashing)
Shock 30 g (1.06 oz), 11 ms
Correction Factor
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3


40.0
(1.57)
Ground
68.7
(2.70)
40.0
7/8--16 UN--2A (1.57) Load

46.2 (2)
30.0 (1.18)(1) (1.82)
2 Places
28.2
7.3 (0.29) x 5.3 (0.21) (1.11)
Mounting Slots
4 Places
40.0
(1.57) Ground
68.8 Load
(2.71)
40.0
(1.57)
M12 X 1
30.0 (1.18) (1) 46.2 (2)

2 Places (1.82)
28.2
7.3 (0.29) x 5.3 (0.21) (1.11)


Weld Field Immune and ToughCoat Finish
Specifications
Attribute 871P
Load Current 200 mA
Repeatability 10% of effective operating distance
871P DC 872L DC Micro Weld Field Immunity 1000 Gausses

Quick-disconnect Style Certifications UL Listed, c-UL Certified, and CE Marked for all applicable directives
connector versions also meet IP69K (IEC 529)
Housing Material Plastic body, zinc base

Green: Power
Shock 30 g (1.06 oz), 11 ms
871P DC Mini
Correction Factor
Steel 1.0
Brass 0.40.5
Aluminum 0.30.4
Copper 0.20.3



(1.57)
68.7 -- +
(2.70) Load Load
40.0 1 4 1 4
7/8--16 UN--2A (1.57) 2 3 + -- 2 3
-- 1060V DC + -- 1060V DC +
46.2
30.0 (1.18)(1) (1.82)(2)
2 Places
28.2
7.3 (0.29) x 5.3 (0.21) (1.11)
Mounting Slots
4 Places

(1.57)
68.8
(2.71) 2 1 2 1
40.0
3 4 Load 3 4
-- +
(1.57) -- +
M12 X 1 Load
-- 1060V DC + -- 1060V DC +
30.0 (1.18) (1) 46.2 (2)

2 Places (1.82)
28.2
7.3 (0.29) x 5.3 (0.21) (1.11)

871D 3-wire DC Cylinder Sensors

Cylinder Position Inductive Style
Specifications
Attribute 871D
Load Current, Max. <200 mA
Load Current, Nom. 10 mA (non-activated), 18 mA (activated)
Leakage Current <80 A
Voltage Drop < 2.5V DC @ 200 mA
Switching Frequency 10 Hz
871D DC Mini Repeatability 5% typical
Quick-disconnect Style 12 mm Hysteresis 15% typical
Protection Type Reverse polarity, false pulse, transient noise, short circuit, and overload
Weld Field Immunity 20,000 A @ 1 in.
Enclosure Type Rating NEMA 1, 2, 3, 3R, 4, 6, 12, 13; IP67 (IEC 529)
Green: Power
Status Indicator Orange: Output
Shock 30 g (1.06 oz), 11 ms
871D DC Micro
Quick-disconnect Style 12 mm
Housing Material Machined aluminum
Probe Material Stainless steel, ceramic face

Mini-connector Models Normally Open
Range of Rotation NPN (Sinking)
304
48 (1.9) +
35 (1.4)
1/4 in.--20UNC x 3/4 in. Load
Grade 8 screw 37 --
1 4
25 (1.5) 2 3
(1.0)
O-Ring Dia. 17.13 x 2.62 FPM -- 1030V DC +
12.17
30 (0.48)
(1.2) Output Dia.
Power
64.2
(2.5)
L
2 mm Set Screw 8
Tightening Torque 1--1.5 Nm (0.3)
7/8 in.--16 UN
Micro-connector Models Normally Open

Range of Rotation PNP (Sourcing)
304
48 (1.9) 2 1
35 (1.4) 1/4 in.--20UNC x 3/4 in. 3 4

Grade 8 screw 37
25 (1.5) -- +
(1.0) Load
O-Ring Dia. 17.13 x 2.62 FPM -- +
1030V DC
12.17
30 (0.48)
(1.2) Output Dia.
Power 50
(2.0)
L
2 mm Set Screw 8 M12 x 1
Tightening Torque 1--1.5 Nm (0.3)
L*= Probe length varies by catalog number. See Product Selection tab on http://ab.rockwellautomation.com.

871D 2-wire AC/DC Cylinder Sensors

Cylinder Position Inductive Style
Specifications
Attribute 871D
Inrush Current (one cycle) <3 A (t < 20 msec)
Leakage Current <1.7 mA @ 120V AC
Voltage Drop <6V @ 400 mA
871D DC Mini Switching Frequency 50 Hz
Quick-disconnect Style 12 mm Repeatability 5% typical
Weld Field Immunity 20,000 A @ 1 in.
Enclosure Type Rating NEMA 1, 2, 3, 3R, 4, 6, 12, 13; IP67 (IEC 529)
Green: Power
Status Indicator Orange: Output
871D DC Micro
Shock 30 g (1.06 oz), 11 ms
Quick-disconnect Style 12 mm
Vibration 55 Hz, 1 mm amplitude, 3 plane

Mini-connector Models Normally Open
Range of Rotation Ground
304
48 (1.9) 1
35 (1.4) 1/4 in.--20UNC x 3/4 in.
Grade 8 screw 37 2 3
25 (1.5)
(1.0)
O-Ring Dia. 17.13 x 2.62 FPM
Load
12.7
30 (0.5)
(1.2) Output Dia.
Power 64.2
(2.5)
L
2 mm Set Screw 8
Tightening Torque 11.5 Nm (0.3)
7/8 in.--16 UN
Micro-connector Models Normally Open or Normally Closed
Range of Rotation Ground
304 1
48 (1.9) 2 3 Load
1/4 in.--20UNC x 3/4 in.
35 (1.4) Grade 8 screw 37
25 (1.5)
(1.0)
O-Ring Dia. 17.13 x 2.62 FPM
12.7
30 (0.5)
(1.2) Output Dia. 50
Power (2.0)
L
2 mm Set Screw 8 1/2 in.--20 UNF--2A
Tightening Torque 11.5Nm (0.3)
L*= Probe length varies by catalog number. See Product Selection tab on http://ab.rockwellautomation.com.

871D DC WorldClamp Cylinder Sensors

Power Clamp and Gripper Style
Specifications
Attribute 871D
Load Current 150 mA max
Leakage Current <10 A
Voltage Drop <2.5V
Bul.871D DC - Small Chicklet Repeatability <2%
100 mm, 165 mm, and 200 mm Hysteresis 5% typical
Connection Type 4-pin micro quick-disconnect
Bul.871D DC - Large Chicklet
Green: Power
100 mm, 165 mm, and 200 mm Status Indicator Orange: S1 output
Red: S2 output
Shock 30 g (1.06 oz), 11 ms
Bul.871D DC - Cylindrical Chicklet
100 mm

Front View Side View
46.9 17.7
(1.85) (0.70)
17.7
(0.70)
Large Chicklet Small Chicklet Cylindrical Chicklet

3.25 (0.12) 11.5
2.8 (0.11) Dia. (0.45)
6.60
(0.26) 6.5
(0.25)
20 9 7.8
(0.79) (0.35) (0.31)
12.2
(0.48)
58.4 15.5
(2.3) Dia. (0.61)
8.38 Wiring Diagrams
(0.33)
17 Normally Open
(0.67) 13.0 PNP (Sourcing)
(0.51)
-- +
6.0 Load S2
5.33 (0.21) (0.23) 2.0 (0.07)
4.5
(0.37) 18.0 -- +
(0.70) Load S1
-- 1030V DC +

871D AC/DC WorldClamp Cylinder Sensors

Power Clamp and Gripper Style
Specifications
Attribute 871D
Load Current 100 mA max
Inrush Current 2 A (one cycle)
Bul.871D AC/DC - Small Chicklet Operating Voltage 20150V AC/DC
100 mm, 165 mm, and 200 mm Voltage Drop <10V
Repeatability <2%
Bul.871D AC/DC - Large Chicklet
100 mm, 165 mm, and 200 mm
Connection Type 5-pin AC micro quick-disconnect
Two green: power S1 and S2
Status Indicator Orange: S1 output
Red: S2 output
Shock 30 g (1.06 oz), 11 ms

Front View Large Chicklet Small Chicklet
55.1 (2.17) 2.8 (0.11) Dia. 3.25 (0.12)
11.4 6.60 (0.26)
22.76 (0.89) (0.45) Dia. 6.5
20 (0.25)
(0.79) 12.2
S1 S2
(0.48)
17.2 8.64 (0.34) 35 58.4 15.5 (0.61)
(0.68) (1.38) (2.3) Dia. 8.38
(0.33)
13.0
17 (0.67) (0.51) 2.0 (0.07)
6.0
50.8 (0.23)
22.6 (0.20) Dia. 18.0
(0.89) 5.33 (0.21)
4.5 (0.70)
(0.37)
Wiring Diagrams
Side View
Normally Open
Ground
19
(0.75) S2
S2 Load
S1
S1 Load

Bulletin 871R 3-wire DC Ring Sensors

Ring Style
Specifications
Attribute 871R
Load Current 200 mA
Bul.871R DC Cable Style Operating Voltage 1030V DC
12 mm and 20 mm Voltage Drop 2.4V
Repeatability 2%
Protection Type Reverse polarity, transient noise, short circuit, overload, and false pulse
Bul.871R DC Micro Enclosure Type Rating NEMA 4, IP67 (IEC 529)
50 mm Cable: 2 m (6.6 ft.) length 3-conductor #26 AWG PVC
Connection Type
Quick-disconnect: 4-pin micro style
Shock 5 g (0.18 oz)
Vibration 1055 Hz
Bul.871R DC Micro
50 mm
Cable Style (Cat.871R-D12NP39-E2) Normally Open
47 PNP (Sourcing)
(1.85)
26.5 28.5 + --
(1.04) (1.12) 1030V DC
8
(0.32)
Brown + --
Black Load
39 20
(1.54) (0.79)
Brown + Blue
Black A/Out
12 Blue --
(0.47)


Cable Style (Cat.871R-D20NP73-E2) Normally Open
106 PNP (Sourcing)
(4.17)
24 + --
(0.95) 26 18
(1.02) (0.71) 1030V DC
Brown + Brown + --
Black Load
Black A/Out
73.5 Blue --
(2.90)
20
Blue
(0.79)
Micro Quick-disconnect Style(871R-D50N90-D4 and 871R-D50NN90-D4) Complementary Normally Open and Normally Closed
190 PNP (Sourcing)
(7.48)
40 115 48 -- +
(1.58) (4.53) (1.89) Load
45 N.C.
(1.77)
2 1
3 4
N.O.
-- +
90 80 50 Load
(3.54) (3.15) (1.96) 1030V DC
-- +
6.2
(0.24) 6.2
(0.24)
Micro Quick-disconnect Style(871R-D100NP120-D4 and 871R-D100NN120-D4) Complementary Normally Open and Normally Closed
PNP (Sourcing)
-- +
Load
N.C.
2 1
135 100 3 4
(5.31) (3.94) N.O.
-- +
Load
1030V DC
-- +
36 8.9 120 (4.72)

(1.4) 8 (0.35)
(0.32) 166 (6.54)

Bulletin 871S 3-wire DC Slot Sensors

Slot Style
Specifications
Attribute 871S
Load Current 200 mA
Voltage Drop 2.4V
Repeatability 2%
871S DC Cable Style Protection Type Transient noise and false pulse
30 mm Slot
Enclosure Type Rating NEMA 4; IP65 (IEC 529)
Connection Type Cable: 2 m (6.6 ft) length, 3-conductor #26 AWG PVC
Indicator Status Indicators None
Shock 5 g (0.18 oz)
Vibration 1055 Hz

32.6 120 PNP (Sourcing)
(1.28) (4.73)
+ --
18 80 1030V DC
(0.71) (3.15)
Brown + --
22 Black Load
(0.87)
Blue
95.7
(3.77) 30
(1.18)
Brown +
Black A/Out
6.5 Blue --
(0.26)
Sensing
Area

Notes:

Rockwell Automation Support
Use the following resources to access support information.
Knowledgebase Articles, How-to Videos, FAQs, Chat,

Technical Support Center www.rockwellautomation.com/knowledgebase
User Forums, and Product Notification Updates.
www.rockwellautomation.com/global/support/get-support-
Local Technical Support Phone Numbers Locate the phone number for your country.
now.page
Find the Direct Dial Code for your product. Use the www.rockwellautomation.com/global/support/direct-
Direct Dial Codes code to route your call directly to a technical support dial.page
engineer.
Installation Instructions, Manuals, Brochures, and
Literature Library www.rockwellautomation.com/literature
Technical Data.
Product Compatibility and Download Center Get help determining how products interact, check
features and capabilities, and find associated www.rockwellautomation.com/global/support/pcdc.page
(PCDC) firmware.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, LISTEN. THINK. SOLVE, Pico, Rockwell Automation, Rockwell Software, ToughCoat Finish, ToughLink, VersaCube, WorldClamp, and WorldProx are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400
Publication PROX-TD001G-EN-P - June 2017

Supersedes Publication PROX-TD001F-EN-P - April 2017 Copyright 2017 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Prox td001 - en P

Uploaded by

Copyright:

Available Formats

Prox td001 - en P

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Prox td001 - en P

Uploaded by

Copyright:

Available Formats

Technical Data

Inductive Proximity Sensors

871C 2-wire AC Full Featured Tubular Sensors

871C AC Cable Style Voltage Drop 10V @ 5200 mA 10V @ 5250 mA

Connection Type Cable: 2 m (6.5 ft) length, 2-conductor PVC

2 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

2 Status Brown Brown

Mini QD Style Normally Open or Normally Closed

Micro QD Style Normally Open or Normally Closed

Ground Note: No ground wire on 12 mm. Attach housing

2 Status D 2 3 Load Note: Load can be switched to pin 2.

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 3

871C 2-wire AC Plastic Barrel Tubular Sensors

871C AC Cable Style Leakage Current 1.7 mA

4 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 5

871C Analog Output, 3-wire DC Tubular Sensors

6 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)]

+ Brown + Brown + Brown

I - Blue I - Blue I - Blue

0.25 mm/V 0.375 mm/V 0.875 mm/V

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 7

871C 2-wire NAMUR Intrinsically Safe, Cable Style Tubular Sensors

871C NAMUR Cable Style Repeatability <10%

Correction Factors Entity Parameters

IMPORTANT Operating parameters must be adhered to.

8 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

Micro QD Style Normally Open

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 9

871C 3-wire DC Mini Tubular Sensors

10 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

NPN (Sinking) PNP (Sourcing)

Pico QD Style Normally Open

Status Status PNP (Sourcing) NPN (Sinking)

Pico with Lead Style Normally Open

Smooth 152 Threaded 152 PNP (Sourcing) NPN (Sinking)

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 11

871C 3-wire DC Extended Temperature Tubular Sensors

12 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

Micro QD Style Normally Open

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 13

871T 3-wire DC Stainless Steel Barrel Tubular Sensors

14 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

Mini QD Style Normally Open

Rockwell Automation Publication PROX-TD001G-EN-P - June 2017 15

871T 2-wire AC Stainless Steel Barrel Tubular Sensors

16 Rockwell Automation Publication PROX-TD001G-EN-P - June 2017

Approximate Dimensions [mm (in.)] Wiring Diagrams

3 m (9.8 ft) Green Green

C B Note: No green wire on 12 mm.

Mini QD Style Normally Open or Normally Closed

Note: Load can be switched to pin 3.