Maximum retail pricelist

for bearings

Effective from 1st May, 2017

* This price list supercedes all earlier pricelists Install confidence, install SKF!
Supplementary designations Internal clearance
N Snap ring groove in outside cylindrical surface of the The bearing internal clearance is defined as the total distance
outer ring. through which one bearing ring can be moved relative to the other
NR As N, but with snap ring. under zero measuring load. Movement in the radial direction is
RS1 Contact type rubber seal with sheet steel called radial internal clearance; axial movement, axial internal
reinforcement, at one side of the bearing. clearance. The internal clearance is standardized.
2RS1 RS1 seals at both sides of the bearing.
RZ Low friction seal of synthetic rubber with sheet steel Rolling bearings are delivered with different internal clearance. The
reinforcement at on side of the bearing. internal clearance will vary from bearing type to bearing type. The
2RZ RZ seals at both sides of the bearing. most common clearance is NORMAL (with no suffix).
Z Shield (non-contact type) at one side of the bearing.
2Z Z shields at both sides of the bearing. C1 = Bearing internal clearance smaller than C2
ZN Z shield at one side of the bearing and snap ring C2 = Bearing internal clearance smaller than normal
groove in outer ring. C3 = Bearing internal clearance greater than normal
ZNR As ZN, but with snap ring. C4 = Bearing internal clearance greater than C3
2ZNR As 2ZN, but with snap ring. C5 = Bearing internal clearance greater than C4
TN9 Glass fibre reinforced polyamide 6,6 window-type
cage. Why internal clearance?
HN3 Stands for carbonitrided bearing. Performance
1. In order to fit a bearing tightly on a shaft it is necessary that
of standard through hardened bearings can be
the shaft is slightly larger than the bore of the inner ring. When
drastically improved by the use of a surface heat
the bearing is mounted, the inner ring will be expanded and
treatment called carbonitriding. Carbonitriding is a
consequently the space available for the rolling elements will be
high temperature heat treatment, which involves
reduced. The reduction in space available for rolling elements
the diffusion of carbon and nitrogen into the surface
when the bearing is mounted is accommodated by internal
of the steel. Deep Groove Ball Bearings (DGBB)
clearance
with carbonitrided inner rings have been found to
2. Steel will expand with increased temperature. In operation the
be twice as resistant compared to regular hardened
temperature of the various parts of a bearing will not remain
DGBBs.
uniform and resulting in varying degrees of expansion, which is
H Stands for radial clearance in the upper half of
compensated by the internal clearance. The internal clearance
the same clearance bracket e.g. 6002/C3H, here
required is dependent upon the mounting fit and the operating
clearance for C3 is between 8 to 23 micron but for
conditions. In case of doubt a bearing with greater clearance
C3H clearance is between 15 to 23 micron. CNL
shall always be selected.
Stands for radial clearance in the lower half of
the same clearance bracket e.g. 6304/CNL, here
For more details/information, write to:
clearance for normal bearing is between 5 to 20
Marketing Department,
micron but for CNL clearance is between 5 to 14
Vehicle Service Market,
micron.
SKF India Limited,
CNP Stands for radial clearance which is a combination
Chinchwad Pune 411 033
of the upper half of normal (CN) and the lower half
Phone: +91-20-6611 2500
of C3 range e.g. 6305/CNP, here the clearance for
Fax: +91-20-6611 2440
normal bearing is between 5 to 20 micron and 13 to
Helpline: 1800 222 007 (Toll Free from MTNL/BSNL landlines)
28 micron for C3. Hence, CNP clearance will be 13 to
or +91-20-6633 7777 (normal STD charges apply)
21 micron.
Website: www.skfindia.com
VB133 Chamfer in bore deviating from basic bearing.
VQ091 Close bore diameter tolerance.
This edition of Maximum Retail price of SKF products are as on
VB524 Chamfer in bore and outer diameter deviating from
1st May 2017. For latest information please contact your nearest
basic bearing.
Automotive Distributor. (Please visit our website to locate a
VQ213 Special tolerance for bearing vibration & peaks.
Distributor near you.) M.R.P. given in this list are recommended
MTF7&9 Here MT stands for medium temperature grease and
prices, retailers/Distributors are free to sell below the M.R.P.
F7 & F9 gives the quantities of grease.
GJN7 Here GJN stands for high temperature grease and 7
The contents of this publication are the copyright of the publisher
for grease quantity.
and must not be reproduced (even extracts) unless permission is
J Pressed steel cage.
granted. Every care has been taken to ensure the accuracy of the
Q SKF TQ Line bearings come with a logarithmic
information contained in this publication but no liability for any loss
contact profile that provides for optimum stress
or damage whether direct, indirect or consequential arising out of
distribution over roller/raceway contacts. Special
the use of the information contained herein.
design of sliding surfaces of guide flange and large
roller ends consid erably promotes lubricant film
formation at roller end/flange contacts. Resulting
benefits include increased operational
reliability and reduced sensitivity to
misalignment.
Designation MRP (`) Designation MRP (`) Designation MRP (`) Designation MRP (`)

Deep groove ball 6004 185 6200-2RS1 170 6204-Z/C3 218

bearings 6004/C3 185 6200-2RS1/C3 170 6204-Z/HN3 218
6004/HN3 213 6200-Z 132 6204-Z/HN3C3 218
16007 282 6004-RS1 215 6200-Z/C3 132 6204-2RZ 260
16007/C3 282 6004-RS1/C3 215 6200-2Z 147 6204-2RZ/C3 260
16008 386 6004-2RS1 239 6200-2Z/C3 147 6204-2RZN/C3 260
1838001/C3 261 6004-2RS1/C3 239 6201 99 6204-2Z 234
1838001/C4 261 6004-Z 198 6201/C3 99 6204-2Z/C3 234
1838001/HN3C3 261 6004-Z/C3 198 6201-RS1 120 6204/D8 200
1888180 1121 6004-2Z 213 6201-RS1/C3 120 6205 268
1888451 1075 6004-2Z/C3 213 6201-2RS1 142 6205 NR/C3 272
306445 C 841 6004/CNHD8S0VG043 185 6201-2RS1/C3 142 6205/C3 268
6000 129 6005 208 6201-2RS1/C3LLHT23 142 6205 E/HN3VK374 272
6000/C3 129 6005/C3 208 6201-Z 112 6205/HN3 272
6000/C3D8VG043 129 6005-RS1 232 6201-Z/C3 112 6205-RS1 304
6000-2RS1 175 6005-RS1/C3 232 6201-2Z 121 6205-RS1/C3 304
6000-2RS1/C3 175 6005-2RS1 263 6201-2Z/C3 121 6205-2RS1 336
6000-2RS1/C4HTF7 175 6005-2RS1/C3 263 6202 110 6205-2RS1/C3 336
6000-Z 138 6005-Z 224 6202/C3 110 6205-Z 288
6000-Z/C3 138 6005-Z/C3 224 6202/HN3C3 111 6205-Z/C3 288
6000-2Z 144 6005-2Z 237 6202-RS1 137 6205-Z/HN3C3H 288
6000-2Z/C3 144 6005-2Z/C3 237 6202-RS1/C3 137 6205-2RZ 320
6000-2Z/C4 144 6006 266 6202-RS1/MT33F9VG043 137 6205-2RZ/C3 320
6001 126 6006/C3 266 6202-2RS1 152 6205-2Z 309
6001/C3 126 6006-RS1/C3 286 6202-2RS1/C2LHT23 152 6205-2Z/C3 309
6001-RS1/C3 159 6006-2RS1 318 6202-2RS1/C3 152 6206 400
6001-2RS1 184 6006-2RS1/C3 318 6202-2RSH/C3 152 6206 N 400
6001-2RS1/C3 184 6006-Z 283 6202-Z 123 6206 N/C3 400
6001-2RSH 184 6006-2Z 304 6202-Z/C3 123 6206 NR/C3 400
6001-Z 139 6006-2Z/C3 304 6202-2Z 134 6206 TN9/C3VQ488 407
6001-Z/C3 139 6007 282 6202-2Z/C3 134 6206/C3 400
6001-2Z 143 6007/C3 282 6202-2Z/MT33F9 134 6206/HN3C3H 400
6001-2Z/C3 143 6007-RS1 322 6202/VG043 131 6206-RS1 434
6001-2Z/GJN 143 6007-RS1/C3 322 6202/S00VG043 110 6206-RS1/C3 434
6001/HN3C3VG043 126 6007-2RS1 358 6203 139 6206-2RS1 460
6002 143 6007-2RS1/C3 358 6203/C3 139 6206-2RS1/C3 460
6002/C3 143 6007-2Z 352 6203-RS1 159 6206-2RS1/C3MT33 461
6002/C3H 143 6010 622 6203-RS1/C3 159 6206-Z 423
6002-RS1 180 6010/C3 622 6203-2RS1 181 6206-Z/C3 423
6002-2RS1 196 6010-2RS1 696 6203-2RS1/C3 181 6206-2Z 453
6002-Z 155 6010-2Z 679 6203-2RS1/C3GJNVP101 181 6206-2Z/C3 453
6002-Z/C3 155 613963/C3 178 6203-Z 152 6207 394
6002-2Z 172 61804/C2LHT23 305 6203-Z/C3 152 6207/D8 394
6002-2Z/C3 172 61804/C3 305 6203-2Z 166 6207/C3 394
6003 169 61805 205 6203-2Z/C3 166 6207/C3D8 394
6003/C3 169 61902/C3 218 6204 200 6207 N 385
6003/C3HD8 169 61902-Z/C3 218 6204 N 200 6207 NR 394
6003-RS1 176 61902-2Z 218 6204/C3 200 6207 NR/C3 394
6003-RS1/C3 176 61905/C3 234 6204-RS1 231 6207-RS1 423
6003-2RS1 221 61906/D8S0VB578 275 6204-RS1/C3 231 6207-RS1/MT 440
6003-Z 181 6200 119 6204-2RS1 260 6207-2RS1 468
6003-Z/C3 181 6200/C3 119 6204-2RS1/C3 260 6207-2RS1/C3 468
6003-2Z 193 6200-RS1 152 6204-2RS1N 261 6207-Z 421
6003-2Z/C3 193 6204-Z 218
Designation MRP (`) Designation MRP (`) Designation MRP (`) Designation MRP (`)

6207-Z/C3 421 6213-2Z/C3 1034 6303-Z/C3 253 6307-2Z 524

6207-2Z 445 628/D8 125 6303-2Z 266 6307-2Z/C3 524
6207-2Z/C3 445 628-2Z 129 6303-2Z/C3 266 6307/D8 480
6208 475 629-2RS1 127 6304 202 6308 713
6208/C3 475 629-2Z 109 6304/C3 202 6308/C3 713
6208 N 484 629-2Z/C3 109 6304 N 214 6308 N 718
6208 N/C3 484 63/28/C3HN3 546 6304 N/C3 214 6308 N/C3 718
6208 NR 501 6300 168 6304-RS1 235 6308 NR 741
6208 NR/C3 501 6300/C3 168 6304-RS1/C3 235 6308 NR/C3 741
6208-RS1 521 6300-2RS1 248 6304-2RS1 258 6308-Z 746
6208-2RS1 556 6300-2RS1/C3 243 6304-2RS1/C2LHT23 258 6308-Z/C3 746
6208-2RS1/C3 556 6300-Z 178 6304-2RS1/MTF7 258 6308-ZN 749
6208-Z 507 6300-Z/C3 178 6304-2RS1/C3 258 6308-ZN/C3 749
6208-Z/C3 507 6300-2Z 186 6304-Z 223 6308-ZNR 774
6208-2Z 532 6300-2Z/C3 186 6304-Z/C3 223 6308-2Z 779
6208-2Z/C3 532 63006-2RS1/C4SOOHT 452 6304-2Z 235 6308-2Z/C3 779
6209 574 6301 102 6304-2Z/C3 235 6308-2RZNR/C3 797
6209/C3 574 6301/C3 102 6305 300 6309 1167
6209-2RS1 651 6301-RS1 122 6305/C3 300 6309/C3 1167
6209-2RS1/C3 651 6301-RS1/C3 122 6305/C3H 305 6309 N 1174
6209-Z 603 6301-RS1/VC5131F9 122 6305 N 302 6309 N/C3 1174
6209-Z/C3 603 6301-RS1/MTF7 122 6305 N/C3 302 6309 NR 1210
6209-2Z 638 6301-RS1/MT33F9 122 6305-RS1 330 6309 NR/C3 1210
6209-2Z/C3 638 6301-RS1/C3MTF9 122 6305-2RS1 355 6309-RS1 1219
6210 603 6301-RS1/C3VC513F9 122 6305-2RS1/C3 355 6309-RS1/C3 1219
6210/C3 603 6301-2RS1 132 6305-Z 316 6309-2RS1 1269
6210 N 607 6301-2RS1/C3 132 6305-Z/C3 316 6309-2RS1/C3 1269
6210 N/C3 607 6301-2RS1/C3VC5131 132 6305-2Z 335 6309-Z 1210
6210 NR 633 6301-2RS1/VC5131F7 132 6305-2Z/C3 335 6309-Z/C3 1210
6210-2RS1 803 6301-Z 116 6306 419 6309-2Z 1246
6210-2RS1/C3GJN 803 6301-Z/MT33F9 116 6306/C3 419 6309-2Z/C3 1246
6210-Z 641 6301-Z/C3 116 6306 N 420 6310 1176
6210-ZNBR 946 6301-2Z 122 6306 N/C3 420 6310/C3 1176
6210-Z/C3 641 6301-2Z/C3 122 6306 NR 433 6310 N 1182
6210-2Z 674 6302 206 6306-RS1/MT 453 6310 N/C3 1182
6210-2Z/C3 674 6302/C3 206 6306-2RS1 480 6310 NR 1219
6211 790 6302-RS1 228 6306-2RS1/C3 480 6310 NR/C3 1219
6211/C3 790 6302-RS1/C3 228 6306-Z 437 6310-2RS1 1296
6211-RS1 841 6302-2RS1 255 6306-Z/C3 437 6310-2RS1/C3 1296
6211-2RS1/HTF7 859 6302-2RS1/C3 255 6306-2Z 453 6310-Z 1242
6211-Z 829 6203-2RS1/C3HTF7 181 6306-2Z/C3 453 6310-2Z 1261
6211-2Z 860 6302-Z 216 6306/HN3CNP 414 6310-2Z/C3 1261
6211-2Z/C3 860 6302-Z/C3 216 6307 487 6311 1725
6212 899 6302-2Z 224 6307/C3 487 6311/C3 1725
6212/C3 899 6302-2Z/C3 224 6307 N 489 6311-2RS1 1756
6212-2RS1 1038 6303 235 6307 N/C3 489 6311-2RS1/HTF7 1841
6212-2RS1/C3 1038 6303/C3 235 6307 NR 507 6311-Z 1778
6212-Z/C3 1006 6303-RS1 265 6307 NR/C3 507 6311-Z/C3 1778
6212-2Z 1017 6303-RS1/C3 265 6307-RS1/MT 689 6311-2Z 1827
6212-2Z/C3 1017 6303-2RS1 292 6307-2RS1 689 6311-2Z/C3 1827
6213 984 6303-2RS1/C3 292 6307-2RS1/C3 689 6312 2038
6213/C3 984 6303-2RS1/C3HTF7 292 6307-2RS1NR/C3 702 6312/C3 2038
6213-2Z 1034 6303-Z 253 6307-Z 504 6312-2RS1 2168
6307-Z/C3 504 6312-2RS1/C3 2168
Designation MRP (`) Designation MRP (`) Designation MRP (`) Designation MRP (`)

6312-Z 2093 32213 J2/Q 1776 6379/K-6320/Q 2629

6312-Z/C3 2093 02872/2/02820/2/Q 711 32214 J2/Q 1705 683/672/Q 2958
6312-2Z 2138 09067/09195/Q 492 32216 J2/Q 2249 687/672/Q 2700
6312-2Z/C3 2138 11590/11520 423 32217 J2/Q 3113 72212/2/72487/2/Q 1471
6313 2335 15123/15245/Q 486 32218 J2/Q 4465 BT1-0017 A/Q 375
6313/C2 2335 1888400/Q 32305 J2/Q 640 BT1-0230/Q 2600
6313/C3 2335 (565/562 X) 1938 32307 J2/Q 994 BT1-0381/Q 1076
6313-2RS1 2467 1988/1922/Q 456 32308 J2/Q 970 BT1-0500/Q 2724
6313-2RS1/C3 2467 24780/24720/Q 767 32309 J2/Q 1232 BT1-0501/Q 2105
6313-Z 2387 25572/25520/Q 795 32911/Q 1073 BT1-0702/Q 1317
6313-Z/C3 2387 25577/2/25523/2/Q 809 33005/Q 461 BT1-1066/Q 1244
6313-2Z 2436 25580/25522/Q 772 33010/Q 962 BT1B 329013 A/Q 471
6313-2Z/C3 2436 25590/2/25520/2/Q 878 33019/Q 2505 HM 212049/011 1929
6313-2ZNR 2489 25590/2/25523/2/Q 878 330201/Q 1455 HM 903249/2/210/2/Q 1373
6313-RS1/C3HTVT193 2350 25877/2/25821/2/Q 702 330356 B/Q (32213) 1776 JLM 710949/910/Q 1118
6313-2Z/C3HTVT531 3216 2789/2729/Q 727 330632 C/Q (31312) 2368 JM 511946/910/Q 1160
98206/C3L 406 28580/2/28521/2/Q 870 33108/U4Q 673 JM 716649/610/Q 2705
QJ 209 MA/C2 1237 30203 J2/Q 307 33111/QVB500 1164 LM 11949/910/Q 444
QJ 309/C2 1266 30204 J2/Q 342 33112/Q 1433 LM 29749 F/711/Q 496
RLS 7 1262 30205 J2/Q 364 331257 1178 LM 29749/710/
VKWM 1944 30206 J2/Q 482 33215/Q 2354 QCL7CVA607 551
(BB1- 3902 ) 290 30207 J2/Q 525 34306/34478/Q 2275 LM 48548/510/Q 419
VKWM 1945 30208 J2/Q 817 344/332/Q 764 LM 501349/310/Q 603
(BB1- 4764 B) 248 30209 J2/Q 603 3585/3525/Q 1183 LM 501349/314/Q 758
VKWM 1946 30211 J2/Q 1094 369 S/2/362 A/2/Q 1007 LM 603049/011 741
(BB1-4788 ) 238 30214 J2/Q 1446 3780/3720/Q 1317 LM 603049/012/Q 568
VKP 63031 (LS 8) 253 30215 J2/QCLN 1538 3782/3720/Q 1346 M 12649/610/Q 477
VKBC 1006 (MS12) 579 30302 J2/Q 345 387/382 A/Q 1027 M 802048/011/Q 1137
VKT 8023 (62/28) 481 30305 C 510 395/394 A/Q 1235 M 86649/2/610/2/Q 751
VKT 8065 (6308/C3 RO) 580 30306 J2/QCLN 598 395 A/394 A/Q 1210 M 88048/010/Q 735
VKT 8067 (6211/C3 RO) 600 30308 J2/Q 847 395 S/394 A/Q 1210 VKBC 1000 (30213) 1220
30309 J2/Q 1184 39580/W/2/39520/2/Q 1889 VKBC 1001 (30304) 360
Imported deep groove 30312 J2/Q 2175 39581/39520/Q 1889 VKBC 1002 (32208) 626
ball bearing 31307 J2/QCLN 915 3982/3920/2/Q 1554 VKBC 1003 (32220) 4066
31309 J2/QCLN 1250 3984/2/3920/2/Q 1429 VKBC 1004 (33210) 1309
VKEB 61033 (608 2Z) 120 31594/2/31520/2 906 39585/39520/Q 1244 VKBC 1005 (33211) 1458
VKT 8016 320/32 X/Q 428 399 A/394 A/QVB079 1177 VKBC 1007 (32206) 503
(6308-2RS1/C3) 900 32004 X/Q 422 418/414/Q 865 VKBC 1009 (33217) 2420
VKT 8013 (6011-2Z) 1215 32006 X/Q 420 42687/42620 1543 VKT 8001 (30210) 611
VKT 8014 (6214) 2213 32007 X/Q 528 42690/42620/Q 1842 VKT 8002 (31312 L) 2090
VKT 8015 (6314) 3643 32008 X/Q 587 462/453 X/VB535 1247 VKT 8004 (32310) 1320
VKT 8017 (6009-2RS1) 950 32010 X/Q 716 47487/47420 X 1500 VKT 8006
VKT 8018 32012 X 1072 47890/47820/Q 2148 (15100S/15250X) 466
(6011-2RS1) 1408 32012 X/QVB531 1072 482/472/Q 1419 VKT 8009 (3188S/3120) 756
VKT 8019 (6011) 1043 32013 X/QVB533 1139 497/492 A/Q 2690 VKT 8024 (32005 X) 369
VKT 8020 (6012) 1128 32014 X/Q 1331 535/532 A 1431 VKT 8047 (33209) 750
VKT 8021 (6013) 1581 32020 X/Q 2239 539/532 X 1171 VKT 8059 (3659) 440
VKT 8022 (6014) 1669 32205 BJ2/Q 423 566/563/Q 1482 VKT 8061 (32306) 570
VKT 8025 (6015) 1800 32207 J2/Q 687 567/563 1498 Imported tapered roller
VKWB 1782 32210 J2/Q 914 575/572/Q 1874 bearings
(61903-2RS1) 435 32211 J2/Q 847 580/572/Q 1616
32212 J2/Q 55200 BT1-0523/VU1006
Taper roller bearings (330201/Q) 1455 C/55437/QVE807 2092
Designation MRP (`) Designation MRP (`) Designation MRP (`)

(30307 type) 836 VKBC 0929 VKT 8008 (22212CC) 2350

BT1-0524/VU1006 (32215 J2/Q) 1750
(32208 type) 691 VKBC 0957 Cylindrical roller bearing
BT1-0525/VU1006 (497/460 L) 1632
(32209 type) 734 VKBC 0958 VKT 8010 (NJ 310 N) 1152
BT1-0526/VU1006 (U 399/360 A/L) 1377 VKT 8051 (NU 310 N) 1050
(30210 type) 674 VKBC 0959 (33207/Q) 1950 VKT 8056 (NUP 310 NR) 1050
BT1-0528 A/VU1006 VKBC 0960 (33205/Q) 1250 VKT 8060 (NU 309 E) 830
(30216 type) 1714 VKBC 0962 (32011 X/Q) 1350 VKT 8064 (NU2209EMN) 830
BT1-0530/VU1006 VKBC 0964 (33012/Q) 5850
(32219 type) 3725 VKT 8012
BT1-0545 A/VU1006 (30310 J2/Q) 2750
(30212 type) 1027
BT1-0553 A/VU1006 Spherical roller bearing
(32220 type) 4886
BB1 Series

Variant Segment Suitable For Vehicle Make Suitable For Vehicle Model Application MRP
BB1-0016 A PC & UV Tata Motors/ Fiat Motors Indica Vista/Manza /Fiat Gearbox C- 510 Fuat 259
Punto /Linea
BB1-0037 CE PC & UV Tata Motors Nano Bosch GCM1 Alternator 193
(6203 type) Mahindra & Mahindra Ltd. Mahindra Jeep Drive End Bearing
BB1-0078 PC & UV Ford Fiesta / Ikon Spares /AVTEC 403
Transmission
BB1-0097 PC & UV Tata Motors Nano Bosch GCM1 Alternator 145
(6201 type) Drive End Bearing
BB1-0234 PC & UV Maruti Suzuki Swift Transmission 228
(6205 type)
BB1-0372 AB PC & UV Hyundai Motors Santro / Accent Bosch Zelta Alternator 151
(6202 type) Non Drive End Bearing
BB1-0372 BE 2W/3W Segment India Yamaha Motor Pvt. Ltd. Alpha Plus Gear Primary Drive 151
(Secondary Belt )
BB1-0382 PC & UV Bosch Alternator Lucas Starter Bearing 164
(6202 type)
BB1-0390 A 2W/3W Segment Hero Moto Corp Passion Clutch Cover Shaft 167
(6200 type)
BB1-0420 A PC & UV Hyundai Motors Santro / Accent Bosch GCM 2 Rear Side 137
(6002 type) Alternator
BB1-0434 2W/3W Segment OMR Bagla Automobiles NA Electric Motor 227
(6303 type)
BB1-0434 A 2W/3W Segment AUR. Motors Ltd. NA Electric Motor 227
(6303 type)
BB1-0563 PC & UV Maruti Suzuki Zen BEHR Viscus Clutch 261
(6205 type) System
BB1-0596 2W/3W Segment Mahindra & Mahindra Alfa, Rear Axle/Crankshaft 215
(62/22 type) Piaggio Motors Ape
India Yamaha Motor Pvt. Ltd. RZ
BB1-0633 A PC & UV Bosch/ Auto Ignition Zeta Alternator 349
(6303 type)
BB1-0697 A 2W/3W Segment Honda Unicorn 160 CC Main Shaft 104
BB1-0877 PC & UV Maruti Suzuki EECO Rear Axle 474
BB1-3040 A PC & UV Tata Motors - Indica Delphai TVS Pump Lucas DPC Fuel Pump 423
(BB1-3040 type)
BB1-3065 DC PC & UV Ford Fiesta Lucas TVS Alternator 301
(BB1-3065 CE Drive End Bearing
type)
BB1-3065 EA PC & UV Ford Fiesta Lucas TVS Alternator 301
(6303 type) Drive End Bearing
BB1-3150 2W/3W Segment Hero Moto Corp CBZ Main Shaft RH 313
(6006 )
BB1-3169 (6308/ CV & Tractor Swaraj Mazda T 3500 Main Shaft Bearing 853
VE250 type)
BB1-3191/HN3 CV & Tractor John Deere 5103 Drive Shaft 472
(BB1-3191 type)
Variant Segment Suitable For Vehicle Make Suitable For Vehicle Model Application MRP
BB1-3191 2W/3W Segment Royal Enfield Machismo Transmission 472
BB1-3264 PC & UV Toyota Transmission /Lucas 860
(6305 type) TVS Alternator
BB1-3273 PC & UV Toyota Fortuner Input Shaft Rear Side 1108
(6308 E type) (R150 transmission)
BB1-3273 A PC & UV Mahindra & Mahindra Ltd. Scorpio - New Model Rear Axle 1018
BB1-3274 PC & UV Toyota Fortuner Output Rr Side, 475
R150 Transmission
BB1-3275 PC & UV Toyota Fortuner Output Ct Side, 983
(6307 E type) R150 Transmission
BB1-3358 CV & Tractor Tafe MF 1035 DI, 30 DI - IDB Rear Axle IDB Model 1636
(6213 type) Rear Axle
(Dura Brake Models)
BB1-3459 PC & UV Mahindra & Mahindra Ltd. XUV 500 All Wheel Drive Transmission Input 498
(6306 E type) / Xylo Shaft
BB1-4700 A PC & UV Maruti Suzuki Alto / Wagon R Steering 148
(61804 type)
BB1-4701 2W/3W Segment Hero Moto Corp Achiever/Hunk/CBZ Transmission 357
(6302 type)
BB1-4702 A 2W/3W Segment Honda Aciva / Deo Crank case 228
(6302 type)
BB1-4704 2W/3W Segment India Yamaha Motor Pvt. Ltd. Crux/Libero/Alba/Gladiator Crank Shaft 215
(6203 type)
BB1-4705 AE 2W/3W Segment India Yamaha Motor Pvt. Ltd. Alpha Plus Crank Shaft 322
BB1-4705 B 2W/3W Segment India Yamaha Motor Pvt. Ltd. FZ 16 Crank Shaft 322
(6305 E type)
BB1-4712 CV & TRACTOR Tata Motors Indica Lucas Starter Bearing 198
(6004 type)
BB1-4714 2W/3W Segment India Yamaha Motor Pvt. Ltd. FX/R15 Transmission 180
(6004 type)
BB1-4719 2W/3W Segment India Yamaha Motor Pvt. Ltd. FZ 16 Crank Shaft 345
BB1-4721 2W/3W Segment India Yamaha Motor Pvt. Ltd. FX/R15 Transmission 162
(6003 type)
BB1-4722 2W/3W Segment India Yamaha Motor Pvt. Ltd. FX/R15 Transmission 162
(6203 type)
BB1-4724 B 2W/3W Segment India Yamaha Motor Pvt. Ltd. Alpha Plus Transmission 207
BB1- 4728 2W/3W Segment LML Supreme /Star /Select II/ Engine 320
(6206 type) Pulse
BB1-4730 2W/3W Segment India Yamaha Motor Pvt. Ltd. Clutch lifter baring Clutch Lifter Bearing 144
BB1-4751 C 2W/3W Segment Honda Unicorn 160 CC Counter Shaft 176
BB1-4752 C 2W/3W Segment Suzuki India Limited New Access 125 CC Crank Shaft 166
BB1-4753 2W/3W Segment Suzuki Motors Gixxer Engine 234
BB1-4758 E 2W/3W Segment Honda Unicorn 160 CC Cam Shaft 124
BB1-4787 A 2W/3W Segment Honda Unicorn 160 CC Balancer Shaft -Left 104
And Right
BB1-4800 2W/3W Segment India Yamaha Motor Pvt. Ltd. Alpha Plus Crank Front 305
Variant Segment Suitable For Vehicle Make Suitable For Vehicle Model Application MRP
BB1B 446740 CD PC & UV Mahindra & Mahindra XUV 500 Intermediate shaft 555
BB1B 446740 CE PC & UV Mahindra & Mahindra Ltd. XUV 500 Drive Shaft 629
BB1B 630819 A 2W/3W Segment Bajaj Saffire Crankshaft 313
(6304 type)
BB1B 630819 A/ 2W/3W Segment Bajaj Safire Crank shaft 313
HN3 (6304 type)
BB1B 631046 B PC & UV Tata Motors / Fiat Indica Vista/Manza /Fiat Main Shaft 408
Punto /Linea
HUB Units

Variant Application Suitable For Vehicle Make Suitable For Vehicle Model MRP
BAH-0013 D Rear Wheel Piaggio Ape truck 1340
BAH-0031 Front Wheel Fiat India Uno, Palio 1128
BAH-0036 Front Wheel Tata Motors Vista, Indigo, Manza 1084
Ford India Ikon
BAH-0052 Front Wheel Tata Motors Indica 917
Fiat India Uno, Palio, Siena
BAH-0052 C Rear Wheel Bajaj Auto Mega RE Diesel 1036
Front Wheel Mahindra & Mahindra Maximo
BAH-0087 Front Wheel Maruti Suzuki Maruti 800, Omni, Esteem, Zen (New) 802
BAH-0104 Front Wheel Maruti Suzuki Alto & WagonR (old models) 897
BAH-0109 B Front Wheel Ford India Fiesta, Fusion, Ikon,Figo 1063
BAH-0179 Rear Wheel Tata Motors Indica, Indigo 959
Maruti Suzuki Marina, Vista, Manza RitZ
BAH-0221 Front Wheel Maruti Suzuki Alto K10, WagonR, Zen Estilo, 711
A-Star (New Models)
BAH-0229 Front Wheel Maruti Suzuki Swift, Swift Dzire, Ritz, Ciaz 1005
BAH-0230 Front Wheel Maruti Suzuki Swift, Swift Dzire 917
Non ABS, Piaggio FW Non ABS
Rear Wheel Piaggio Porter RW
BAH-0259 A Front Wheel Tata Motors Zest, Bolt 1243
BAH-0261 Front Wheel Mahindra & Mahindra Verito, Vibe, Logan Micra 1404
Non ABS Nissan Rennault Sunny, Pulse
BAH-0263 Front Wheel ABS Mahindra & Mahindra Verito, Vibe,KUV 100 1404
BAH-0265 Front Wheel Renualt India Limited KWID 725
BAH-0275 Rear Wheel Maruti Suzuki Swift, Swift Dzire, 1134
BAH-0278 Rear Wheel Maruti Suzuki Alto, A Star, Wagon R, Estillo 999
BAHB-636193 C Front Wheel Hyundai Motors Santro, Accent, Getz, i10, i20 1134
BAHB-636149 CC Front Wheel ABS Maruti Suzuki Ertiga, SX4 1429
BAHB-636149 CD Front Wheel Maruti Suzuki Ertiga, SX4 1248
Non ABS, Tata Motors Tata Winger

Taper HUB Bearing

Variant Application Suitable For Vehicle Make Suitable For Vehicle Model MRP
BTH-1024 AE Front Wheel Mahindra & Mahindra Xylo, Scorpio 1799
BTH-1206 AB Rear Wheel Ford India Fiesta, Fusion, Figo 1986
BTH-1238 Rear Wheel Tata Motors Ace Pickup, Iris 1387
VKBC 1008 Rear Wheel Tata Motors Xenon, 207 DI (New Model) 2018
(BTHB 329129 DE)
BTH-1256 Front Wheel Toyota Motors Innova 1811
BTH-1265 A Front Wheel Mahindra & Mahindra TUV 300 1863
Imported HUB Units

Variant Application Suitable For Vehicle Make Suitable For Vehicle Model MRP
VKBC 0968 Front Wheel Toyota Corolla E1, Altis 2100
VKBC 0969 Front Wheel Toyota Camry 3100
VKBC 0970 Front Wheel Honda Accord 3100
VKBC 0971 Front Wheel Mitsubishi Lancer 1700
VKBC 0979 Front Wheel Skoda Octavia 1750
VKBC 0980 Front Wheel Skoda Fabia 5250
VKBC 0981 Front Wheel Skoda Laura 4750
VKBC 0993 Rear Wheel Hyundai Motors Accent ABS 3400
VKBC 0994 Rear Wheel Hyundai Motors Accent Non ABS 3100
VKBC 0995 Rear Wheel Hyundai Motors Santro Non ABS 3000
VKBC 0996 Rear Wheel Hyundai Motors Santro ABS 3350
VKBC 0997 Rear Wheel Hyundai Motors i10, i20, Getz, OLD Verna, Grand i10 Non ABS 4250
VKBC 0998 Rear Wheel Hyundai Motors i10, i20, Getz, OLD Verna, Grand i10 ABS 5250
VKBC 0999 Rear Wheel Hyundai Motors Verna Fluidic ABS 5000
 Center support bearing

Deep groove ball bearings Taper roller bearings Centre support bearings Hub bearing units

Disc brake pads SKF grease Engine/wheel bearing kits Steering races kits

Universal joint kit

Timing belts Universal joint kits SKF premium grease Seals

Install confidence, install SKF! To know more about SKF

VSMs complete range of
products: Download our free
Vehicle Service Market app from google play and
SKF India Limited ios app store just search for
Chinchwad, Pune 411 033 India
vsm skf india parts
Tel: +91-20-6611 2500
CIN: L29130MH1961PLC011980

skf.com | skfindia.com
SKF is a registered trademark of the SKF Group.

SKF Group 2017

The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted.
Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage
whether direct, indirect or consequential arising out of the use of the information contained herein.