ANT AMB4520R0 1433 Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Preliminary Issue

2MX-1710-2690-33-20.5i-M-R
Model: AMB4520R0

Antenna Specifications
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1880 1850 - 1990 1920 - 2170 2490 - 2690
Polarization +45 , -45
Electrical downtilt () 0 - 10 , continuously adjustable
0 5 10 0 5 10 0 5 10 0 5 10
Gain (dBi)
18.6 18.8 18.5 19.1 19.2 18.9 19.4 19.6 19.4 20.1 20.3 20.1

Side lobe suppression for first side lobe 0 5 10 0 5 10 0 5 10 0 5 10


above main beam (Typ.) (dB) 18 17 16 18 17 16 18 17 17 18 17 17
Horizontal 3dB beam width () 35 33 31 27
Vertical 3dB beam width () 6.7 6.2 5.6 4.8
VSWR < 1.5
Gain Roll-off at boresite (dB) Avg. -10
Horizontal Side lobe suppression (dB) Typ. 20
Isolation between ports (dB) 28
Front to back ratio, copolar (dB) Typ. 30
Intermodulation IM3 (dBc) -153 (2 x 43 dBm carrier)
Max. power per input (W) 250 (at 50 ambient temperature)
Impedance () 50
Grounding DC Ground

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1468 x 349 x 166
Packing dimensions (H x W x D) (mm) 1870 x 415 x 240
Antenna weight (kg) 18.5
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 29.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature () -40.. +65
Frontal: 520 (at 150 km/h)
Wind load (N) Lateral: 165 (at 150 km/h)
Rear side: 500 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 4 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 16 1.9 kg 1 (Separate packing)

1
Preliminary Issue

2MX-1710-2690-33-20.5i-M-R
Model: AMB4520R0

Integrated RCU Specifications


Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 s)
Lightning protection (kA)
10 (8/20 s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N: HWMxxx...y


HWMxxx.yy
y - Yellow

1710 - 2690 MHz

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2014-05-28

You might also like