Scribd
Upload
578 views2 pages

Clutch

1. A cone clutch transmits a maximum torque of 467.72 N-m. The inner diameter is 300 mm and face width is 48.1 mm. 2. To transmit 10 N-m of torque with a multi-disk clutch having inner and outer friction lining diameters of 70 mm and 100 mm respectively, requires 4 contacting surfaces. 3. A plate clutch with inner and outer diameters of 100 mm and 200 mm respectively, an operating force of 23561.94 N, and transmitting capacity of 353.43 N-m.

Uploaded by

Angielou Sialana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
578 views2 pages

Clutch

1. A cone clutch transmits a maximum torque of 467.72 N-m. The inner diameter is 300 mm and face width is 48.1 mm. 2. To transmit 10 N-m of torque with a multi-disk clutch having inner and outer friction lining diameters of 70 mm and 100 mm respectively, requires 4 contacting surfaces. 3. A plate clutch with inner and outer diameters of 100 mm and 200 mm respectively, an operating force of 23561.94 N, and transmitting capacity of 353.43 N-m.

Uploaded by

Angielou Sialana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CLUTCH

1. A cone clutch transmits 24kW at 490rpm. 5. Find number of contacting surfaces for a
The coefficient of friction is 0.2 and allowable multi disk clutch plate transmitting torque of
intensity of pressure is 0.35N/mm. The semi 10N-m and inner and outer diameters of
cone angle is 12. The outer diameter is fixed friction lining are 70mm and 100mm
as 310mm.Assuming uniform wear theory; respectively. The operating force is of
find the maximum torque which is magnitude 305N and coefficient of friction is
transmitted. 0.2.
1060 4
Solution: = Solution: = (+)
2

241060 4(10)
= =
2(490) . 2(305)(. 10 + .07)
= 467.72
= 3.86 4
2. A cone clutch transmits 24kW at 490rpm.
6. A plate clutch consists of 1 pair of contacting
The coefficient of friction is 0.2 and allowable
surfaces. The inner and outer diameter of the
intensity of pressure is 0.35N/mm. The semi
friction disk is 100mm and 200mm
cone angle is 12. The outer diameter is fixed respectively. The coefficient of friction is 0.2
as 310mm.Assuming uniform wear theory; and permissible intensity of pressure is
find the inner diameter.
1.5N/mm. Assuming uniform wear theory,
( 2 2 ) calculate the operating force in the clutch.
Solution: = 8
Solution: = ()
2
(24)(. 35)()(. 3102 2 )
467.72 =
8(12) 1.5(100)(200 100)
=
2
= 300
= 23561.94
3. A cone clutch transmits 24kW at 490rpm.
The coefficient of friction is 0.2 and allowable 7. A plate clutch consists of 1 pair of contacting
intensity of pressure is 0.35N/mm. The semi surfaces. The inner and outer diameter of the
cone angle is 12. The outer diameter is fixed friction disk is 100mm and 200mm
as 310mm.Assuming uniform wear theory; respectively. The coefficient of friction is 0.2
find the face width of friction lining. and permissible intensity of pressure is
1.5N/mm. Assuming uniform wear theory,
calculate the torque transmitting capacity of
Solution: = 2
2 the clutch.
310 300 () (+)
= 2 Solution: = =
2(12) 2 4

(1.5)(100)(200100) (.2)(23561.9)(.20+.10)
= 48.1 := 2
; =
4

4. A cone clutch transmits 24kW at 490rpm. = 23561.94 ; = 353.43


The coefficient of friction is 0.2 and allowable
intensity of pressure is 0.35N/mm. The semi 8. A plate clutch consists of 1 pair of contacting
cone angle is 12. The outer diameter is fixed surfaces. The inner and outer diameter of the
as 310mm.Assuming uniform wear theory; friction disk is 100mm and 200mm
calculate force required to engage clutch. respectively. The coefficient of friction is 0.2
and permissible intensity of pressure is
4
Solution: = (+) 1.5N/mm. Assuming uniform wear theory,
calculate the power transmitting capacity of
4(467.72)((20)) the clutch at 80rad/s.
=
. 35(0.310 + 0.3) Solution:. =
= 3241.5 = 353.43(80) = 28.27
9. If number of contacting surfaces are 5, then
number of disks required in multi disk clutch

Solution: = + 1

= 5 + 1

= 6

10. A clutch has outer and inner diameters 100


mm and 40 mm respectively. Assuming a
uniform pressure of 2MPa and coefficient of
friction of liner material is 0.4, the torque
carrying capacity of the clutch is.
(+)
Solution: = 7
4

0.4(2)(100+40)
= 7
4

= 196

You might also like