Vme Bus: Starter Kit
Vme Bus: Starter Kit
APPLICATIONS
SY VME/S05
This starter kit has been configured to provide industrial power supply and cooling. Easy
engineers with a practical, high performance, access to the peripherals and backplanes is
high quality development environment. The also provided. The system uses standard
preconfigured system includes a high hardware products allowing easy
performance Pentium or Pentium II board and
progression from development to
a variety of peripherals suitable for the implementation.
development environment. The chassis itself
is an EMC enclosure providing 5 slots with an
HIGHLIGHTS
n EMC enclosure n versatile Intel Pentium or Pentium II MMXTM single
n 300 Watt power supply board computer
n pre-installed peripherals:-
n 19" rack mountable
CD-ROM
n 5 slot VME backplane Floppy
Hard Disk
Concurrent Technologies Inc Concurrent Technologies Plc Concurrent Technologies SA (Pty) Ltd
Suite 130 4 Gilberd Court, Newcomen Way 19 Frikkie de Beer St.,
3840 Packard Road, Colchester, Essex CO4 4WN, PO Box 14232, Hatfield, 0028, Pretoria,
CO N C U R R E N T Ann Arbor, MI 48108 ,U. S. A. U. K. South Africa
T E CHNOL OGIE S Tel: (734) 971 6309 Tel: (+44) 1206 752626 Tel: (+27) 12 348 2606
Fax: (734) 971 6350 Fax: (+44) 1206 751116 Fax: (+27) 12 348 8367
Email: [email protected] http://www.gocct.com
ENCLOSURE
n 4U 19" rack mounting or desktop EMC enclosure
SPECIFICATION
n hinged aesthetic EMC front panel
n 5 slot J1/J2 monolithic VME backplane
n card frame & card guides - 160mm recessed card cage
n mounted fan - for maximum air flow
n Schaffner fused/filtered IEC320 power connector
n illuminated power on/off rocker switch
Card Cage
n protected reset switch
EIDE
n operating voltage display (3 LEDs)
n AC/DC power cabling
n shuttelized peripheral bay CPU
Board
POWER SUPPLY
Slot 5
Slot 1
Slot 3
Slot 4
Slot 2
n branded 300W quality power supply
n input voltage - 85V - 132V or 176 - 264V AC
n input frequency - 45 to 440Hz PSU VME Backplane
n output power
+5V at 40A*
+12V at 10A*
-12V at 4A*
*not to exceed 300W total
PERIPHERALS
n 4 Gbyte EIDE Hard Disk
CPU BOARD
n 233MHz MMX Pentium CPU or n Floppy Drive
266MHz MMX Pentium II CPU utilizing Intels BX Chipset n Fast EIDE CD-ROM
n 32 Kbytes internal CPU (Level 1) cache
PHYSICAL DIMENSIONS
n 64 Mbytes of Synchronous DRAM n 19 rack adaptors with mounting handles
n 512 Kbytes of very fast secondary (L2) cache n 4U height
n 512 Kbytes of BIOS Flash EPROM n 520mm x 436mm (without rack adapter)
n 8 Mbytes of Flash EPROM
n high resolution graphics interface WEIGHT
n 11.8kg (populated)
n supporting 10Mbps (10Base-T) and 100Mbps (100Base-Tx)
Ethernet ENVIRONMENTAL SPECIFICATION
n high performance EIDE interface n 5C to +45C (operating)
n Floppy disk interface n 10% to 90% Relative Humidity (operating)
n expansion interface to 2-slot PMC adaptor Board n -20C to +70C (storage)
n PS/2 compatible keyboard interface n 10% to 90% Relative Humidity (storage)
n PS/2 mouse port
n 2 asynchronous RS232 serial channels
EMC CERTIFICATION
n Compliance with the EMC Directive 89/336/EEC and
n 1 Parallel Printer Port (ECP, EPP and IEEE1284)
Standards BS EN55022, BS EN50082-1 and FCC Part
n Watchdog timer 15
n support for VxWorks, Windows NT, Solaris, LinuxTM and
QNX
n single slot
ORDERING INFORMATION
Order Number Product Description (Hardware)
SY VME/S05-11 5 Slot VME Starter System with 233MHz Pentium MMX CPU
SY VME/S05-20 5 Slot VME Starter System with 266MHz Pentium II MMX CPU
All companies and product names are trademarks of their respective organizations. Concurrent Technologies 1999
Specification subject to change; E and OE. Datasheet Code 1348/0199