Scribd
Upload
152 views2 pages

MML

This document contains commands and descriptions to configure and monitor various network elements like BTS, BCF, TRX, MAL lists, signaling channels, routing areas, licenses, and software/firmware on an Ericsson 2G/3G mobile network. Some key commands include checking frequency lists on MALs, adding BTS to MALs, viewing configurations of BTS, BCFs, TRXs, checking signaling channels, adding routing areas, checking available and used licenses, and monitoring software/firmware versions.

Uploaded by

Mohsen Arab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
152 views2 pages

MML

This document contains commands and descriptions to configure and monitor various network elements like BTS, BCF, TRX, MAL lists, signaling channels, routing areas, licenses, and software/firmware on an Ericsson 2G/3G mobile network. Some key commands include checking frequency lists on MALs, adding BTS to MALs, viewing configurations of BTS, BCFs, TRXs, checking signaling channels, adding routing areas, checking available and used licenses, and monitoring software/firmware versions.

Uploaded by

Mohsen Arab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

ZEBE:MAL,1304,1800:FREQ=619&595&629&591,: -----To create MAL list:

ZEQA:BTS=305:MAL=1304,; -----To attach BTS to MAL:


ZEQO:BTS=305 --VIEW MAL
ZEBT:BTS=305 ---REMOVe AND ADD FREQ TO MAL
ZEAI:BTS=305; ----view ADCE 2G to 2G
ZEAP:BTS=305: ----view ADJW 2G to 3G
ZDWQ ----VIEW D-CHANEL FOR ABIS
ZDTI VIEW D-CHANEL FOR TDM
ZFXL:PSEI=08:; ----CHECK PSE
ZEBH:MCC=432,MNC=11,LAC=1745,RAC=1:A:NSEI=14310:; ----- FOR ASSIGN TO OTHERS PSE
ZESL::ETPE,1:ALL; -----FOR CHECK PCU WORKED ON WHICH BCSU
ZEBI:MAL,395:; CHECK WHICH FREQ ATTACHED TO MAL LIST
ZWTI:PP:STMU;
ZW7I:FEA,FULL:FSTATE=ON; check available licence
zW7I:UCAP,FULL:FEA=3282; check used licence
ZESL::ETPE,3:ALL:; Check BCSU: ETPE mapping

ZFXL:; Check NSEI


ZFXL:PSEI=21:; Check NSEI
ZEBH:MCC=432,MNC=11,LAC=1731,RAC=1:A:NSEI=18370:; Add NSEI to routing area
ZEQA:BTS=34:MS=1,;
ZESI:ID=16; CHECK DAP
ZEFX create HDLC
ZEEI:BCF=20 CHECK BCF
ZNEL; CHECK BSC SIGNALIMG
ZEQV:SEG=10:Y OR N; ACTIVE OR DEACTIVE GPRS
ZEFS:BCF=10,L OR U ; LOCK BCF
ZEFR:10 RESET TO SITE
ZERS:BTS:20,TRX:10,L OR U; LOCK,UNLOCK TRX
ZEQS:BTS:20,L OR U LOCK,UNLOCK SEC
ZEEI:NAME=MK1G0001A; CHECK
ZERO:BTS=20; CHECK CONFIGURATION OF CELL
ZEOL:BCF#; CHECK ALARM
ZEQO:BTS=20; CHECK CONFIGURATION OF CELL
ZEFO:BCF#; CHECK CONFIGURATION OF BCF
ZERD:BTS=20,TRX=11; DELETE TRX
ZEQD:BTS=20; DELETE SEC
ZEFD:BCF#; DELETE BCF
ZEFC CREATE BCF
ZERC CREATE TRX
ZEQC CREATE SEC
ZQRI:BCSU=3; CHECK BCSU IP
ZNEL; CHECK SIGNALING
ZOYX:BCF092TRX05:IUA:S:BCSU,5:AFAST::; CREATE Association
ZOYP:IUA:BCF092OMU:"10.25.179.24",,49152:"10.5.158.105",27,,,49152:; SET IP IN
Association
ZDWP:MU092:BCSU,5:62,1:BCF092OMU,:; CREATE DCHANEL
ZOYS:IUA:BCF092OMU:ACT:; ACT OR DOWN DCHANEL
ZDWD:MU092:; DELETE DCHANEL
ZOYY:IUA:BCF092TRX01:; DELETE Association
ZQKB CHECK ROUTE
ZQRX TRACE-PING
ZQKC CRATE ROUTE
ZIGO LOG
ZEWO SOFTWERE
ZEWA
ZEWV
3G

ZQRU:ADD:NAME:50000:10000:1000:100;
ZQRC:NPGEP=#:VL#:IPV4=#:ID=#;
ZQKC:NPGEP=#:IP UP NODE:32:UP IP GETWAY RNC;
ZQRB CHECK ROUT
ZQRL
ZQRX
ZQKB

You might also like